Manager II – Quality & Reliability Engineer

Manager II – Quality & Reliability Engineering

Senior Manager, Tax

Supervisor II Machining

Research Associate – II Nitrosamines

Supervisor II Assembly

Product Engineer II

Manufacturing & Process Development Engineer II (Wire & Cable)

MFG & Process Development Engineer II – Molding

Manager II Sales & Marketing

Responsibilities: 1. Team Leadership <ul><li>Manage, mentor, and develop a team of Quality and Reliability Engineers.</li><li>Assign projects and tasks based on individual strengths and organizational priorities.</li><li>Conduct performance evaluations and provide coaching for continuous improvement.</li><li>Lead cross-functional problem-solving teams to address customer quality issues, reduce DPPM, and lower the cost of poor quality.</li></ul> 2. Quality Assurance <ul><li>Develop and implement robust quality control processes and procedures.</li><li>Oversee customer quality audits and ensure compliance with our client quality policies and customer requirements.</li><li>Analyze quality data and metrics to identify trends and areas for improvement.</li></ul> 3. Failure Analysis <ul><li>Lead structured failure investigations (e.g., fault tree analysis) to determine root causes and corrective actions.</li><li>Coordinate product testing related to customer-reported issues.</li><li>Serve as the primary quality interface with customers on escalations, reliability matters, and compliance.</li></ul> 4. Project Management <ul><li>Lead quality and reliability improvement projects from concept through completion.</li><li>Collaborate cross-functionally with Sales, Engineering, and Operations to align on customer quality objectives.</li><li>Support supplier reviews, customer audits, and on-site technical support.</li><li>Conduct periodic business reviews with key customers on DDN quality and reliability performance.</li></ul> 5. Continuous Improvement <ul><li>Identify opportunities for process optimization, cost reduction, and improved efficiency.</li><li>Implement Lean and Six Sigma methodologies to drive continuous improvement.</li><li>Collaborate with Engineering and Sales to share the DDN strategic quality roadmap and strengthen customer partnerships.</li></ul> 6. Reporting and Communication <ul><li>Prepare and present reports on quality and reliability metrics to senior leadership.</li><li>Communicate effectively with internal and external stakeholders on quality matters and escalations.</li><li>Provide Voice of the Customer (VoC) feedback to Product Management, Engineering, and Manufacturing to mitigate risks.</li></ul> 7. Tactical Initiatives <ul><li>Proactively identify and remove roadblocks affecting quality and customer satisfaction.</li><li>Drive urgency and accountability across teams to meet customer expectations.</li><li>Bridge communication between customers and internal teams to ensure timely problem resolution.</li></ul> Requirements: Qualifications and Experience <ul><li>Education: Bachelor’s degree in Electrical, Mechanical, or related Engineering field; Master’s degree preferred.</li><li>Experience: Minimum 7 years in Quality Assurance or Reliability Engineering, including at least 3 years in a managerial or global capacity.</li></ul> Technical Skills: <ul><li>Strong knowledge of Quality Management Systems (QMS), Statistical Process Control (SPC), Gage R&amp;R, and reliability tools.</li><li>Experience with failure analysis using structured methodologies (e.g., fault tree analysis).</li></ul> Certifications: <ul><li>Six Sigma Black Belt, ASQ Certified Quality Engineer (CQE), or equivalent preferred.</li></ul> Soft Skills: <ul><li class="ql-indent-1">Strong leadership and team development skills.</li><li class="ql-indent-1">Excellent problem-solving, communication, and interpersonal abilities.</li><li class="ql-indent-1">Demonstrated customer interface experience in data center interconnect technology.</li><li class="ql-indent-1">Executive-level presence with the ability to influence across all levels of the organization.</li></ul>

Responsibilities: <ul><li>Lead development and execution of standardized DfRE and RV methodologies across Converged Products.</li><li>Champion a Design for Six Sigma (DFSS) culture, mentoring and training product design teams.</li><li>Oversee product validation, including HALT/HAST testing, Test-to-Failure (TTF) methodologies, and DOE approaches.</li><li>Collaborate with Product Development Engineering (PDE), Manufacturing Process Development Engineering (MPDE), Field Application Engineering (FAE), and Advanced Quality Engineering (AQE) teams to integrate reliability considerations throughout the product lifecycle.</li><li>Develop comprehensive test and validation plans aligned with our client LeanPD stage-gate approach.</li><li>Drive early concept testing, failure mode identification, and iterative product design improvements.</li><li>Support failure analysis (F/A), Root Cause and Corrective Action (RCCA), and competitive benchmarking activities.</li><li>Partner with Global R&amp;T COE to develop custom test equipment, test systems, and software for unique testing requirements.</li><li>Manage and coach a high-performing team, ensuring clear accountability, skill development, and work-life balance.</li></ul> Requirements: <ul><li>Bachelor’s or Master’s degree in Electrical Engineering, Electronics, or Mechatronics.</li><li>10+ years of experience in all aspects of reliability engineering for electronic or mechatronic products (reliability estimation, calculation, and risk identification).</li><li>Extensive experience with test equipment, test systems, labs, HALT/HAST testing, validation plans, and custom test systems.</li><li>Proven experience working with global, cross-functional engineering teams in multi-site organizations.</li><li>Strong analytical, critical thinking, and problem-solving skills.</li><li>Knowledge of FIT estimation methodology, Weibull/Chi-Square statistical analysis, FMEDA, FTA, and Bayes theorem applications.</li><li>Reliability engineering training from ASQ, TUV, Reliasoft, or equivalent.</li><li>Excellent written and verbal communication skills in English.</li><li>Willingness to travel up to ~20%.</li></ul>

Responsibilities: <ul><li>The overall responsibility for taxes of each individual investment generally stays with the Management and its local tax advisors.</li><li>Thus, you will act as an in-house advisor helping the various investment to manage their tax affairs.</li><li>In the beginning you can focus on a few major investments and develop and extend the scope over time</li><li>Responsibilities span the whole lifetime of the investment.</li><li>It starts with the acquisition and ends with the exit readiness of the investment. Thus, you can especially</li><li>Help to set up the tax function of new investments or improve the tax function of existing investments;&nbsp;</li><li>Implement your ideas to improve compliance or tax efficiency during the entire holding period;&nbsp;</li><li>Prepare the exit from a tax perspective.</li></ul> Specific tasks will include:&nbsp; <ul><li>Engage with the our client Deal Tax Team during the acquisition process to align on deal structure, tax risks, SPA, and other pre-closing topics&nbsp;</li><li>Align with the Portfolio Company management team on relevant Company and our client group related tax topics after completion</li><li>Support the Portfolio Company management team on engaging a local tax advisor or onboard an own tax function if necessary</li><li>Ensure that tax obligations are clearly defined, and responsibilities are allocated accordingly at the Portfolio Company</li><li>Guide the Portfolio Companies on how to ensure compliance with tax obligations (Tax returns and filings, transfer pricing, sales tax, WHT exemption certificates, CbC reporting) and address any non-compliance issues and advise portfolio management accordingly on remediation measures&nbsp;</li><li>Supporting the operational implementation of Pillar II across our client Portfolio Companies together with the our client tax team</li><li>Help on the optimisation of Portfolio Company tax processes and procedures</li><li>Evaluate the current Portfolio Company tax structure and recommend any changes or planning ideas that will optimize the structure</li><li>Assist in international tax planning initiatives across Portfolio Companies&nbsp;</li><li>Perform tax-risk assessment 12-months prior to anticipated exit&nbsp;</li><li>On occasion, assist with our client Group compliance Tax in the US</li><li>On occasion, assist with M&amp;A tax and deal structuring in regard to the US</li><li>Act as contact person for Portfolio Company management if they need further support or advice on tax related topics&nbsp;</li></ul>&nbsp;Requirements: <ul><li>A minimum of a bachelor’s degree, preferably with a major in Accounting/Finance, or any related business is required</li><li>Advanced degree or professional certifications such as MBA, Master’s in Taxation, or CPA preferred</li><li>At least 8 years relevant tax experience; ideally within the tax department of an international enterprise or in a Tax Consulting firm</li><li>Experience of a broad range of US international tax rules and provisions, including Subpart F, GILTI, FTC, PFICs, WHT, FDII, LoB, FIRPTA, PTI and BEAT</li><li>In-depth knowledge of international corporate tax law and good knowledge in at least one other tax areas (transfer pricing, sales tax CbCR, Pillar 2,….)</li><li>Analytical / strategical thinking, result-oriented personality, highly developed sense of responsibility and strong teamwork</li><li>Practical, hands-on mentality</li><li>Fluent in English, further language skills welcome.</li></ul>

Job Overview: <ul><li>Supervise team to execute toolroom production operation and keep continuous improvement (e.g. new equipment, technology and material introduction, process optimization, employee suggestions adoption etc.)&nbsp;</li><li>with the objective of ensuring toolroom production operation run smoothly and on time delivery , and improve product quality, Designing of electrodes, production efficiency and reduce product scrap rate within company and toolroom production policies and procedures.</li></ul> Responsibilities: People Management and Development: <ul><li>Allocate and balance work across direct reports</li><li>Review and provide timely performance feedback to direct reports</li><li>Mentor, develop and motivate them</li><li>Resolve people issues in the team in order to achieve targeted department performance and enhance staffs capability and working passion.</li></ul> Toolroom Production Management: <ul><li>Develop toolroom production plan</li><li>Allocate manpower based on toolroom production plan</li><li>Monitor toolroom production plan execution and product quality</li><li>Monitor 5S, ISO9000, security discipline execution</li><li>Check and monitor production report in order to ensure toolroom production operation run smoothly and improve product quality, production efficiency, on time delivery and reduce product scrap rate.</li></ul> Requirements: <ul><li>Education, Technical Qualification</li><li>Diploma/Degree in Mechanical Engineering or equivalent.</li><li>3 years toolroom related work experience Personal Attributes &amp; Competencies Communication skill, coordination skill, execution</li></ul>

Job Overview: <ul><li>The Research Associate – II – Nitrosamines is responsible for conducting analytical research, method development, and risk assessment activities focused on nitrosamine impurities in pharmaceutical products.&nbsp;</li><li>The role supports regulatory compliance, safety assessment, and mitigation strategies in line with global regulatory requirements (such as those from the FDA, EMA, WHO, and ICH M7). This position requires a strong understanding of organic chemistry, analytical instrumentation, and impurity profiling.</li></ul> Responsibilities: <ul><li>Development, validation, and transfer of LC/MS methods for quantitative determination of Nitrosamine impurities (Small Molecules and NDSRIs) at ppm to sub-ppb levels</li><li>Design and execution of experiments to identify root causes of Nitrosamine formation and develop mitigation strategies</li><li>Perform chemical extractions of container closure systems and drug product solutions</li><li>Utilize advanced mass spectrometry techniques (LC-MS and GC-MS) for identification and quantification of Nitrosamines</li><li>Prepare technical reports and support documentation for regulatory filings</li><li>Collaborate with subject matter experts, supervisors, and cross-functional teams</li><li>Interpret analytical data, evaluate results, and incorporate findings into project goals</li><li>Maintain compliance with relevant Quality System Regulations and GxP standards</li></ul> Requirements: <ul><li>Experience: 6–10 years in analytical chemistry focused on Nitrosamines</li><li>Education: Master’s degree or equivalent experience; PhD preferred with relevant experience</li><li>Skills Required:</li><li>Proficiency in LCMS/GCMS instrumentation and troubleshooting</li><li>Strong knowledge of Nitrosamine chemistry and analytical techniques</li><li>Experience in method development, validation, and regulatory reporting</li><li>Ability to analyze complex data and draw meaningful conclusions</li><li>Good documentation and technical report writing skills</li></ul>

Responsibilities: <ul><li>To Plan and establish production work schedule to meet delivery times and best utilize company production capacity by releasing work orders.</li><li>Scheduling for materials and production in Coordination with staff throughout the company to ensure timely delivery to customers by obtaining agreement for product ship dates.</li><li>To take full responsibility of the shift in terms of management of staff, management of production and quality targets and to ensure the smooth running of the production processes, produced within the shift in line with the company’s quality systems, processes and procedures.</li><li>To demonstrate excellent people management skills to develop and motivate direct reporting staff and to ensure that Health and Safety rules and regulations are adhered during the shift in line with the companies Health and Safety policy.</li><li>Confer with other supervisors and managers to coordinate operations and activities within or between departments.</li><li>Monitor, measure, and report on production related process performance/KPI’s, general issues and ensure the team is self-managed (SMT) on problem solving and troubling shooting skills to identify root causes and take fast effective action to resolve the problems in hand.</li><li>Assist in maintaining stock rooms and inventory accuracy and participate in physical inventory counts.</li><li>Demonstrate customer centric approach and adherence to customer expectations to promote a positive company image.</li><li>Responsible for on-the-job training of directs. Play active role in the TEOA plan/Kaizen initiative to achieve plans for future growth within the company.</li><li>Set departmental process and link to ISO procedure.</li><li>Stake holder Management</li></ul> Requirements:&nbsp; Professional Experience <ul><li>5 to 7 Years of experience in the same field and industry.</li><li>Bachelor’s degree in mechanical or Electronics Engineering</li><li>Advanced skills with Microsoft Office, especially Excel</li></ul>&nbsp;Leadership Experience: <ul><li>Deep understanding and professional experience of people management.</li><li>Excellent communication and convincing skills</li><li>Self-driven and detail-oriented</li><li>Desire to solve problems with analytical thinking</li><li>Good at people management and execution skills</li><li>Strong organizational skills and a team player</li></ul>&nbsp;Project Experience: <ul><li>Expert in material and production planning.</li><li>Knowledge of SAP</li><li>Quality and Environmental Management System knowledge</li><li>Excellent people management skills to develop and motivate direct reporting staff and to ensure that Health and Safety rules and regulations are adhered to during the shift in line with the companys Health and Safety policy</li><li>Assist in maintaining stock rooms and inventory accuracy and participate in physical inventory counts.</li><li>Play an active role in the TEOA plan/Kaizen initiative to achieve plans for future growth within the company.</li></ul>&nbsp;Qualifications: <ul><li>Bachelor of Science or above degree and an engineering background.</li><li>Preferably Mechanical, Electrical/Electronics, and Industrial Engineer</li></ul>&nbsp;Other Requirements: <ul><li>3-5+ years’ experience as a practitioner as an Engineer.</li><li>Knowledge in Mechanical, Electrical, and Pneumatic drawings.</li><li>Solid understanding of health and safety regulations and practices.</li><li>Strong decision-making and problem-solving skills.</li><li>Excellent communication and interpersonal skills.</li><li>Computer literate with capability in email, MS Office, and related communication tools.</li><li>Knowledge in various machines from Stamping, Molding, Plating, and Assembly.</li></ul>

Responsibilities: <ul><li>Work with multi-functional project teams consisting of Sales, Product Management, Project Management, Operations, Quality, Global Product Approvals and Outside Vendors.</li><li>Collaborate with senior engineers, learn passive, and switch products using pertinent information from Clients internal systems.</li><li>Learn Clients systems, polices.</li><li>Perform data analysis by collaborating with senior engineers and product management.</li><li>To manage the assigned tasks in a timely manner and produce improvements.</li><li>Learn product knowledge by working with labs on product testing and design validation.</li><li>Learn Client Product cycle management and understand new product introduction processes.</li><li>Perform passives and switch products reliability testing by collaborating with labs.</li><li>Prepare for First Article Approvals, Process Capability Studies, 8D reports and 5 WHY analyses.</li><li>Work with Product Lifecycle Management and Engineering documentation management systems.</li></ul> Requirements: <ul><li>Bachelor’s degree in electrical &amp; electronics or mechanical engineering.</li><li>Knowledge of Electronic components and switch gear products</li><li>Knowledge of basic electrical and electronics circuits.</li><li>A very good understanding of the Industrial switch products.</li><li>Knowledge of statistical analysis tools.</li><li>ASME Y 14.5 Geometric tolerancing or equivalent.</li><li>Product life cycle management.</li><li>Good engineering documentation skills.</li></ul>

Responsibilities:&nbsp; <ul><li>Lead process development, implementation, and documentation for bulk cable manufacturing.</li><li>Support product/process validation and transfer activities.</li><li>Assist with product qualification, working closely with engineering and test lab teams.</li><li>Partner with Product Development/Design Engineering to ensure manufacturability.</li><li>Interact with test laboratories on process/product qualification tasks, including DOE, PFMEA, 8D investigations, and Failure Analysis (FA).</li><li>Support tooling specification and design for manufacturing processes.</li><li>Provide engineering support to additional manufacturing sites as required.</li><li>Collaborate with suppliers to ensure process compliance and capability.</li><li>Support SAFE (Safety Activities For Employees) and ISO quality compliance initiatives.</li><li>Provide technical support for manufacturing maintenance activities.</li><li>Participate in cross-functional projects that support business growth and continuous improvement.</li></ul> Requirements:&nbsp; <ul><li>Strong knowledge of materials, processes, and systems used in wire and cable manufacturing.</li><li>Proficient in CAD software for tooling and process design.</li><li>Practical knowledge and experience with SPC (Statistical Process Control), Six Sigma, and Lean Manufacturing principles.</li><li>Ability to manage multiple projects and deliver results under tight timelines.</li><li>Willingness to travel internationally up to 30% as required.</li></ul>

Responsibilities: <ul><li>Overall molding process development, coordinating with interaction processes (Stamping, Plating, Assembly) to ensure the best process and cost for F/Gs</li><li>Concept design &amp; proofing for Molding process and tooling, Process development DOE.</li><li>Technical leader and trouble shooter from LVM to HVM in process development, tooling design &amp; qualification, issue finding and problem solving</li><li>Platforming manufacturing process development.</li><li>Challenge product design for manufacturability and cost feasibility.</li><li>Launch product at rate through FACA/QCPA tools (yield, CPK, OEE…)</li><li>Launch product on time with cross function team.</li><li>Process documentation (DFM，FMEAs, WI, FACA/QCPC…)</li></ul> Requirements:﻿ <ul><li>Bachelor or above degree in mechanical engineering or related background.</li><li>5+ years Mold design, Process and Troubleshooting knowledge / experience.</li><li>Strong knowledge of tool fabrication, tool-steel application/selection, heat treating, and plating/coating.&nbsp;</li><li>Strong knowledge of injection molding processes (Injection, Insert-molding, two-shot, etc.).</li><li>Strong understanding of plastic, injection machine, auxiliary equipment (strip feed, camera, etc).</li><li>Good at Mold flow simulation and analysis.</li><li>Familiar with BTI 5-Step process, and Knowledge of SIM (Scientific Injection Molding).</li><li>Understand tolerance calculations and Geometric Dimensioning and Tolerancing.</li><li>Data oriented issue finding and problem-solving skills.</li><li>Rich shopfloor hand on experience.</li><li>Sensitive on product cost, know how to drive cost through manufacturing process development &amp; design optimization.</li><li>Fluent in using of basic process development related tools like DFM, PFMEA，DOE，FAA, CTAR，CAD，Pro E</li><li>Knowledge of quality control and quality issue analysis and improvement</li><li>Good teamwork and communication skills。</li><li>Fluent in written and Spoken English.</li><li>Oversea working experience is a plus</li></ul>

Role Description: <ul><li>Automotive Business unit responsible for Passenger Vehicle segment.</li><li>The product portfolio includes Terminals &amp; Connectors, Hybrid &amp; Electrical Mobility Solutions (HEMS) products, Data Connectivity solutions and others.</li><li>Leads and manages the sales team, facilitates strategic planning process, and drives the incremental growth objectives of key product lines.</li></ul> Responsibilities: <ul><li>Managing the sales team and managers and supporting the development of sales training programs and tools to ensure team members are equipped to achieve their targets.</li><li>Analyzing competitive activity, business opportunities, sales trends, and results within a region and developing monthly sales territory and account strategies to increase market share.</li><li>Collaborating with other departments, such as marketing, product development, and finance, to align sales strategies with overall company objectives.</li><li>Meeting and exceeding assigned targets for profitable sales and growth across product lines, market areas, and channels.</li><li>Leads the Sales Segment - CAM</li><li>Team Management</li></ul> Requirements: <ul><li>Requires bachelor’s degree BE/ B-Tech (Electrical / Electronics / Mechanical) with Master’s degree preferred.</li></ul> Critical Experience <ul><li>12 or more years of experience in account management and Sales.</li><li>Good exposure to automotive OEM’s / Tier-1s</li><li>Exposure to Interconnection ecosystem (Harness makers, component manufacturer’s) preferred.</li><li>High level of relationship management and can manage multiple key accounts</li><li>Excellent leadership and team management skills – ability to train and mold the team for success.</li><li>Expert level of Sales forecasting, strategic sales planning and understanding customer needs</li><li>Expert level of negotiation and relationship management.</li><li>Expert level of account management, sales forecasting and strategic sales planning</li><li>Collaborates with the customer on large account activities and monitors customer satisfaction.</li></ul>

Skills

Industry

Location

Jobtitle

15 mifid ii Jobs found

Manager II – Quality & Reliability Engineer

Manager II – Quality & Reliability Engineering

Senior Manager, Tax

Supervisor II Machining

Research Associate – II Nitrosamines

Supervisor II Assembly

Product Engineer II

Manufacturing & Process Development Engineer II (Wire & Cable)

MFG & Process Development Engineer II – Molding

Manager II Sales & Marketing

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

15 mifid ii Jobs found

Manager II – Quality & Reliability Engineer

Manager II – Quality & Reliability Engineering

Senior Manager, Tax

Supervisor II Machining

Research Associate – II Nitrosamines

Supervisor II Assembly

Product Engineer II

Manufacturing & Process Development Engineer II (Wire & Cable)

MFG & Process Development Engineer II – Molding

Manager II Sales & Marketing

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.