Compounding Technician

Filling Technician

Equipment Engr - Automation and PLC

Manufacturing Engineer II - CCD Support

QC Lab Sample Coordinator

Environmental Health and Safety (EHS) Manager

Operations Manager

Quality Engineer

Finance Controller

Senior Microbiology Technician

Responsibilities: <ul><li>Operate, monitor, and adjust sterile manufacturing equipment for formulation, filling, and packaging of IV bag products in compliance with SOPs, cGMP, and safety requirements.</li><li>Perform routine preventive maintenance and minor repairs on production equipment to maintain optimal operating conditions.</li><li>Serve as first-line troubleshooting support for equipment and process issues, escalating to engineering or maintenance as required.</li><li>Support equipment and process qualifications, including protocol review, execution participation, and documentation completion.</li><li>Assist in the creation, revision, and implementation of SOPs and production-related procedures.</li><li>Provide training, guidance, and on-the-job support to Production Technician I personnel.</li><li>Perform cleaning, changeover, and line clearance activities to maintain manufacturing operations.</li><li>Accurately complete batch records, logbooks, and production documentation in compliance with data integrity requirements and cGMP practices.</li><li>Review documentation completed by fellow members of the production team.</li><li>Collaborate with Quality Assurance during in-process checks, deviation investigations, and CAPA activities.</li><li>Adhere to DEA and site procedures for controlled substance handling, including documentation and security protocols.</li><li>Work closely with cross-functional teams including Engineering, Validation, and Quality to support operational readiness.</li><li>Operate isolator technology, including performing and verifying sanitization steps, and supporting advanced troubleshooting.</li><li>Ensure controlled substances are handled, documented, and stored per DEA and site requirements.</li><li>Participate in continuous improvement and lean manufacturing initiatives to enhance safety, quality, and efficiency.</li></ul> Requirements: Qualifications / Experience <ul><li>High school diploma or equivalent required; associate degree or technical certification in a mechanical, engineering, or life sciences discipline preferred.</li><li>Minimum of 5 years’ experience in pharmaceutical or regulated manufacturing in areas of compounding, filling, inspection, and secondary packaging. Experience with sterile products or IV bag production preferred.</li><li>Demonstrated mechanical aptitude with hands-on equipment troubleshooting and maintenance skills.</li><li>Knowledge of cGMP, aseptic processing, and controlled substance handling requirements.</li><li>Minimum of 3 years’ experience working with automated production equipment utilizing HMI or SCADA interface required.</li><li>Experience with isolator-based manufacturing strongly preferred.</li><li>Experience reading and following technical documents such as SOPs, maintenance procedures, electrical drawings, equipment arrangements, piping diagrams, and qualification protocols</li></ul> Skills / Competencies <ul><li>Demonstrated problem-solving and mechanical troubleshooting skills.</li><li>Ability to mentor and train less experienced technicians.</li><li>Excellent attention to detail and documentation accuracy.</li><li>Effective communication and teamwork skills.</li><li>Commitment to safety, quality, and data integrity.</li><li>At home working in cleanroom environments with PPE requirements.</li></ul>

Responsibilities: <ul><li>Operate, monitor, and adjust sterile manufacturing equipment for formulation, filling, and packaging of IV bag products in compliance with SOPs, cGMP, and safety requirements.</li><li>Perform routine preventive maintenance and minor repairs on production equipment to maintain optimal operating conditions.</li><li>Serve as first-line troubleshooting support for equipment and process issues, escalating to engineering or maintenance as required.</li><li>Support equipment and process qualifications, including protocol review, execution participation, and documentation completion.</li><li>Assist in the creation, revision, and implementation of SOPs and production-related procedures.</li><li>Provide training, guidance, and on-the-job support to Production Technician I personnel.</li><li>Perform cleaning, changeover, and line clearance activities to maintain manufacturing operations.</li><li>Accurately complete batch records, logbooks, and production documentation in compliance with data integrity requirements and cGMP practices.</li><li>Review documentation completed by fellow members of the production team.</li><li>Collaborate with Quality Assurance during in-process checks, deviation investigations, and CAPA activities.</li><li>Adhere to DEA and site procedures for controlled substance handling, including documentation and security protocols.</li><li>Work closely with cross-functional teams including Engineering, Validation, and Quality to support operational readiness.</li><li>Operate isolator technology, including performing and verifying sanitization steps, and supporting advanced troubleshooting.</li><li>Ensure controlled substances are handled, documented, and stored per DEA and site requirements.</li><li>Participate in continuous improvement and lean manufacturing initiatives to enhance safety, quality, and efficiency.</li></ul> Requirements: Qualifications / Experience&nbsp; <ul><li>High school diploma or equivalent required; associate degree or technical certification in a mechanical, engineering, or life sciences discipline preferred.</li><li>Minimum of 5 years’ experience in pharmaceutical or regulated manufacturing in areas of compounding, filling, inspection, and secondary packaging. Experience with sterile products or IV bag production preferred.</li><li>Demonstrated mechanical aptitude with hands-on equipment troubleshooting and maintenance skills.</li><li>Knowledge of cGMP, aseptic processing, and controlled substance handling requirements.</li><li>Minimum of 3 years’ experience working with automated production equipment utilizing HMI or SCADA interface required.</li><li>Experience with isolator-based manufacturing strongly preferred.</li><li>Experience reading and following technical documents such as SOPs, maintenance procedures, electrical drawings, equipment arrangements, piping diagrams, and qualification protocols</li></ul> Skills/Competencies <ul><li>Demonstrated problem-solving and mechanical troubleshooting skills.</li><li>Ability to mentor and train less experienced technicians.</li><li>Excellent attention to detail and documentation accuracy.</li><li>Effective communication and teamwork skills.</li><li>Commitment to safety, quality, and data integrity.</li><li>At home working in cleanroom environments with PPE requirements.</li></ul>

Overview: <ul><li>The Equipment Engr - Automation and PLC is responsible for ensuring the reliable performance of production equipment by developing, modifying, and troubleshooting PLC programs and CCD (vision) systems.&nbsp;</li><li>The role supports day-to-day plant operations through automation debugging, sequencing improvements, and real-time issue resolution to enhance productivity and OEE.&nbsp;</li><li>This position leads technical training for technicians and new team members, documents system updates, and contributes to continuous improvement initiatives, including deployment and ISO compliance.&nbsp;</li><li>The engineer serves as a key resource in maintaining stable, efficient, and high-quality automated manufacturing processes.</li></ul> Responsibilities: <ul><li>Trouble shooting, Modify or Create Machine PLC program to suit the need of the plant.</li><li>Responsibel for repair and maintenance of the CCD System of the production line.</li><li>PLC system of the automation debugging and improve the sequencing.</li><li>Suggest improvement of automation PLC program to improve productivity and OEE.</li><li>Train technician to resolve the issues encountered between the production.</li><li>CCD light adjustments to improve the performance.</li><li>Responsible to resolve all issues encounter during production run.&nbsp;</li><li>Support on resolving CCD issues encounter during production run and documenting.&nbsp;&nbsp;</li><li>Impart trainings and development for new joiners, Technical Trainees etc.</li><li>Review of deployment</li><li>Review ISO documents and update, Engage in ISO audits.</li></ul> Requirements:&nbsp; <ul><li>Bachelor in Major in Electrical/Electronics</li><li>Preferably Mechanical, Electrical/Electronics and Industrial Engineer,</li><li>5 years minimum experience in the automation assembly and Tooling Design &amp; Development</li></ul> Knowledgeable on this different type of Programming Languages: <ul><li>Ladder Logic</li><li>Function block diagrams</li><li>Structured text</li><li>Sequential flow charts</li><li>Instruction List</li></ul>

Overview: <ul><li>Design and developed electrical control system,testing and qualification introduce advanced electrical control technology with the objective of ensuring new assembly equipment meets schedule and requirements from customers and ECO within the direction of department manager and staff manufacturing engineer.&nbsp;</li><li>Manage and trouble shooting of CCD and cost saving within direction of policies.</li></ul> Responsibilities: <ul><li>Trouble shooting, Modify or Create Machine PLC program to suit the need of the plant.</li><li>Responsible for repair and maintenance of the CCD System of the production line.</li><li>PLC system of the automation debugging and improve the sequencing.</li><li>Suggest improvement of automation PLC program to improve productivity and OEE.</li><li>Train technician to resolve the issues encountered between the production.</li><li>CCD light adjustments to improve the performance.</li><li>Responsible to resolve all issues encounter during production run.&nbsp;</li><li>Support on resolving CCD issues encounter during production run and documenting.&nbsp;&nbsp;</li><li>Impart trainings and development for new joiners, Technical Trainees etc.</li><li>Review of deployment</li><li>Review ISO documents and update, Engage in ISO audits.</li></ul> Requirements:&nbsp; <ul><li>Bachelor in Major in Electrical/Electronics</li><li>5+ years’ experience and practitioner in the automation assembly and Tooling Design &amp; Development</li><li>Computer Knowledge, MS Office etc, SAP knowledge added advantage</li><li>Integrity, Accountability, innovation, Communication.&nbsp;</li><li>Strong background in PLC programming: capable of programming, debugging, editing, and creating new PLC logic.&nbsp;</li><li>Familiar with CCD (Charge-Coupled Device) cameras, especially those used in automated measurement systems (e.g., Autoline).&nbsp;</li><li>Experience with vision system programming tools such as Visco, Keyence, and Datalogic.&nbsp;</li><li>Solid programming skills required; CCD-specific knowledge can be trained.&nbsp;</li><li class="ql-align-justify">Willingness to work on Saturdays when needed</li></ul>

Responsibilities: Sample Management <ul><li>Performs QC sample/reference standard/chromatographic column receipt, processing, distribution for testing and storage.</li><li>Performs QC sample reconciliation and disposal.</li><li>Tracks inventory of product samples, stability samples, and test materials in the lab.</li><li>Uses laboratory software for sample, reference standard, chromatographic column management.</li><li>Verifies accuracy of labeling/documentation provided with samples.</li><li>Informs QC Coordinator if chemical or reference standard is expired for removal from laboratory area.</li><li>Send samples for outside testing. Submit samples to the appropriate labs for testing.</li><li>Create and maintain reports including quality data trending, informational spreadsheets, laboratory log spreadsheets.</li><li>Compile a list of necessary laboratory supplies specifically reference standards, contacting vendors to obtain quotes.</li><li>Uses the purchasing system to procure laboratory supplies.</li><li>Provide status updates to QC management and other departments regarding the submission of samples.</li><li>Maintain a safe work environment by following standards and procedures and complying with legal regulations.</li></ul> Lab Equipment <ul><li>Maintains, operates equipment and instruments supporting sample processing.</li><li>Provides general laboratory support such as routine instrument cleaning/preventative maintenance/calibration, sample receiving, chemical inventory, document filing and housekeeping.</li><li>Works with internal resources to maintain lab in an optimal state. Cleans lab working surfaces and disposes of any excess chemicals, solutions, solvents, etc. in the special waste containers for each class of waste chemicals.</li><li>Under close supervision, learns to troubleshoot basic instrument problems.</li></ul> Investigations&nbsp; <ul><li>Escalates any trends/events to the QC Lab Manager.</li><li>Escalates any sample and reference standard documentation issues to the QC Lab Manager.</li><li>With guidance, participates in OOS/OOT/NOE and other investigations.</li><li>Assists, as and when needed, scientists working in the laboratory.</li><li>May assist in drafting, editing, and reviewing SOPs.</li></ul> Training <ul><li>Maintains assigned training records current and in-compliance.</li><li>May assist in the training of laboratory staff.</li></ul> Compliance&nbsp; <ul><li>Performs assigned work in a timely and safe manner conforming to regulatory, company and compendia requirements within pharmaceutical manufacturing setting.</li><li>Documents accurately data generated in notebooks/worksheets/LIMS in compliance with SOPs.</li><li>Follows internal processes related to controlled substances.</li></ul> Safety <ul><li>Follows EH&amp;S procedures to ensure a safe work environment.</li><li>Follows all applicable safety and standards guidelines, such as SOPs, cGMP, DEA regulations good documentation practice and/or MSDS.</li></ul> Requirements: Education &amp; Experience <ul><li>College graduate, preferably in a Science related field.</li><li>Laboratory experience related to sample management preferred.</li></ul> Knowledge <ul><li>Basic knowledge of sample management in a laboratory environment.</li><li>Some knowledge of applicable safety and standards guidelines: SOP, cGMP, GLP, DEA regulations and/or MSDS.</li><li>Competency in Microsoft Office Suite.</li><li>Proficiency with computer savvy.</li></ul> Skills &amp; Abilities <ul><li>Ability to display and analyze data in a logical manner.</li><li>Good verbal and written communication skills as well as good computer skills.</li><li>Attention to details and accurate record keeping.</li><li>Establish and maintain cooperative working relationships with others.</li><li>Solid organizational skills</li><li>Ability to take initiative, set priorities and follow through on assignments.</li></ul> Physical Requirements <ul><li>Extended periods of sitting, standing, walking, reaching, climbing/balancing, kneeling/crouching/crawling, looking at monitor for extended periods, moderate noise levels and potential business travel.</li><li>Work is in an FDA and DEA-regulated pharma lab environment with risk of exposure to various chemicals.</li><li>Must occasionally lift and/or move up to 15-25 lbs.</li><li>Ability to wear personal protective equipment, including respirators, gloves, etc.</li><li>Specific visions abilities are required by this job include close vision and color vision</li><li>Ability to occasionally tolerate significant differences in temperature and/or humidity for short periods.</li></ul>

Responsibilites: <ul><li>Develop and implement site-wide EHS programs aligned with federal, state, and local regulations, including OSHA, EPA, and DEA requirements for controlled substances.</li><li>Lead risk assessments, job hazard analyses (JHAs), and containment evaluations, particularly in areas handling high-potent and controlled substances.</li><li>Serve as the primary liaison for EHS-related aspects of DEA compliance, supporting controlled substance handling protocols in collaboration with Quality, Security, and Operations.</li><li>Oversee the environmental and safety controls for controlled substances, ensuring proper ventilation, storage, access restrictions, spill response, and waste disposal procedures in compliance with DEA and EPA regulations.</li><li>Develop and maintain physical and procedural controls related to controlled substance areas (e.g., vaults, restricted labs, destruction processes) in partnership with Security and Regulatory Affairs.</li><li>Lead the investigation and root cause analysis of all incidents, near-misses, and controlled substance discrepancies, and implement corrective/preventive actions.</li><li>Ensure training and education of site personnel in EHS best practices, with a focus on potent compound safety, exposure monitoring, and controlled substance handling protocols.</li><li>Implement industrial hygiene programs, including monitoring of airborne concentrations and potential operator exposure to potent and hazardous compounds.</li><li>Establish robust programs for emergency preparedness, including chemical spills, fires, security threats, and controlled substance incidents.</li><li>Maintain all required permits, records, and documentation related to hazardous waste, emissions, safety incidents, and controlled substance EHS compliance.</li><li>Partner with Engineering, Validation, and Operations to incorporate EHS and security standards into facility, utility, and equipment design and commissioning.</li><li>Foster a strong culture of safety, accountability, and environmental stewardship at all levels of the organization.</li></ul> Requirements: <ul><li>Bachelor’s degree in Environmental Science, Occupational Health &amp; Safety, Chemical Engineering, or related field (Master’s preferred).</li><li>Minimum of 7–10 years of progressive EHS experience in a GMP-regulated pharmaceutical or biotechnology manufacturing environment.</li><li>Direct experience managing EHS compliance for controlled substances (DEA Schedules II–V) and high-potency APIs strongly preferred.</li><li>In-depth knowledge of OSHA, EPA, DEA, NJDEP, and global EHS regulations and guidelines.</li><li>Familiarity with industrial hygiene, containment technologies, and safe handling procedures for potent compounds</li><li>Experience leading EHS activities during greenfield/startup site development and qualification is a plus.</li></ul>

Responsibilities: Policies and Procedures (10%): <ul><li>Develop and implement the manufacturing related policies and procedures in order to align with government regulation and corporate policy, organize the formulation of the responsibilities of management personnel at all levels, and optimize the internal structure and staffing.</li><li>Develop and implement assembly function budget and plan allocate function target to subordinates and monitor the achievement of the budget and overall performance in order to achieve targeted of Plant performance.&nbsp;</li></ul> People Management (15%): <ul><li>Allocate and balance work across direct reports&nbsp;&nbsp;</li><li>Review and provide timely performance feedback to direct reports&nbsp;&nbsp;</li><li>Mentor, develop and motivate them&nbsp;</li><li>Help resolve people/functional issues in the team&nbsp;</li><li>Submit manpower application and interview the candidates in order to achieve targeted department performance and retain key talent.&nbsp;</li></ul> Production (25%): <ul><li>Supervise and monitor the production activities and process&nbsp;</li><li>Help to solve critical production issues&nbsp;</li><li>Cooperate with other functions within molding department and other departments in getting necessary support in order to ensure the normal day-to-day production.&nbsp;</li></ul> Assembly (25%):&nbsp; <ul><li>Review the maintenance plan&nbsp;</li><li>Monitor the maintenance plan execution&nbsp;</li><li>Approve the Purchase Request for spare parts&nbsp;</li><li>Provide overall mold/Die/Tool maintenance instruction and monitor the execution in order to ensure the normal operation of die and improve daily operating efficiency.&nbsp;</li></ul> Equipment maintenance (5%): <ul><li>Review the maintenance plan&nbsp;</li><li>Monitor the maintenance plan execution&nbsp;</li><li>Approve the Purchase Request for equipment and parts&nbsp;</li><li>Provide overall equipment maintenance instruction and monitor the execution in order to ensure equipment operate reliably and improve daily operating efficiency.&nbsp;</li></ul> Engineering (10%):&nbsp; <ul><li>Allocate new projects to engineers&nbsp;</li><li>Monitor the new project process and control the cost and schedule&nbsp;</li><li>Provide cross functions/departments coordination&nbsp;</li><li>Help to solve critical technical issues in order to ensure the successful completion of the project.&nbsp;</li></ul> EHS (5%):&nbsp; <ul><li>Formulate and perfect the department EHS management system and operational procedures, and ensure the effective implementation.&nbsp;</li><li>Fully understand and implement EHS responsibilities to ensure EHS work in department meets relevant requirements&nbsp;</li><li>Set departmental and individual EHS performance targets according to laws and regulations and requirements of the company, and check and evaluate the completion of the targets regularly&nbsp;</li><li>Check the safety situation of production site regularly to eliminate all kinds of unsafe factors and prevent accidents.&nbsp;</li></ul> Project Management and Activity (10%):&nbsp; <ul><li>To reduce the costs and improve efficiency of the department, organize and plan key improvement projects, and monitor the implementation of these projects (Tebit Saving, Kaizen)&nbsp;</li><li>In order to improve and cooperate with the plant in implementing the excellent operation objectives, actively participate in training and use tools for improvement, such as VS Transformation, CCF, etc.</li></ul> Requirements: <ul><li>Bachelor and above Degree&nbsp;</li><li>Good English skills (written and oral)&nbsp;</li><li>Min. 10 years shopfloor management experiences in elec. Industry, above two years on managerial positions&nbsp;</li><li>Solid Lean/6 Sigma knowledge and project experiences&nbsp;</li><li>Familiar with quality system and tools&nbsp;</li><li>Rich experiences in operator training and development&nbsp;</li><li>Planning knowledge and experiences&nbsp;</li><li>Proficient PC skills.</li></ul>

Responsibilities: Provide review and drive to approval of the validation protocols and reports for facility, equipment, laboratory instrument, and utility systems. <ul><li>Review and approval of technology/method transfer protocols and reports.</li><li>Review and evaluation of change controls</li><li>Review and approval of deviations and assurance that they define root causes and determine appropriate CAPA.</li><li>Participate in cross-functional teams to support execution of commissioning, installation qualification (IQ), operational qualification (OQ), performance qualification (PQ), and validation protocols.</li><li>Provide quality presence during qualification execution, ensuring data integrity, deviation management, and proper documentation of results.</li><li>Support the timely review and approval of executed qualification documentation and ensure readiness for inspection or submission.</li><li>Drive timely and compliant resolution of deviations, non-conformances, and CAPAs arising during operations and qualification activities.</li><li>Develop, implement, and maintain site-specific quality procedures (SOPs, work instructions, forms) governing validation, change control, deviation, and other SOPs relevant to the responsibilities</li><li>Review and approve site procedures to ensure clarity and compliance with cGMP standards.</li><li>Ensure proper execution of Good Documentation Practices (GDP) in all QA-reviewed documents, including validation records, logbooks, and manufacturing records.</li><li>Act as a QA representative during regulatory inspections, internal audits, and customer audits, with emphasis on operational and qualification-related topics.</li><li>Monitor key quality metrics and drive performance improvements in areas such as deviation reduction, batch record right-first time, and qualification readiness.</li><li>Contribute to the continued inspection readiness of the site, including periodic walkthroughs and risk-based quality improvements.</li></ul> Requirements: Qualifications/Experience <ul><li>Bachelor’s degree in engineering or technical discipline (e.g., engineering, Biology, Chemistry, Pharmacy).</li><li>5+ years of experience in pharmaceutical manufacturing QA, including direct involvement in qualification/validation activities.</li><li>Prior experience reviewing or approving qualification protocols and validation reports in GMP environments.</li><li>Familiarity with aseptic manufacturing, sterile injectable processes, and cleanroom environments.</li><li>Knowledge of FDA cGMPs, ICH Q8-Q10 guidelines, EU Annex 1, and risk-based qualification approaches.</li><li>Experience supporting regulatory inspections and validation documentation reviews.</li></ul> Skills/Competencies <ul><li>Strong knowledge of validation principles and qualification documentation expectations.</li><li>Effective team leader with experience supervising QA staff and coordinating cross-functional support.</li><li>Excellent organizational and communication skills with high attention to detail.</li><li>Ability to work collaboratively with operations, engineering, and validation stakeholders.</li><li>Sound judgment and decision-making under pressure in a dynamic manufacturing environment.</li><li>Commitment to data integrity, continuous improvement, and patient safety.</li></ul>

Responsibilities: <ul><li>Management of finance team to ensure delivery of timely, accurate monthly accounts, preparation of the financial pack and KPIs.</li><li>The key focus will be to drive financial and business improvements in the Filter Products manufacturing site and to act as a business partner to the local GM and management team.</li><li>Support is also required for the local Distribution business.</li><li>Review site month end financials, prepare variance analysis with supporting commentary consolidate for the Hungary region.</li><li>Drive site Gross margin and Non-productive spend initiatives.</li><li>Prepare and review customer and product analysis (pricing, revenue and margin).</li><li>Drive working capital improvements including cash collection and inventory management.</li><li>Ensure that standard costs are maintained and implemented across the product range in the Filter Products manufacturing site.</li><li>Review site control files and trial balances to ensure no financial risk to the business and instil robust financial controls.</li><li>Ensure that all sites comply with the Filtrona Accounting Manual (EAM).</li><li>To support the businesses in the preparation of the annual Plan and quarterly forecasts for the region and associated presentations and packs.</li><li>Review of all capex appraisals pre sign off and follow up on actual spend v plan.</li><li>Attend and present the financials at the monthly operational reviews.</li><li>Legal and banking signatory for the Filter Products business and sign off monthly payroll run.</li><li>Review monthly FX hedging forecasts and submissions to Group Treasury</li><li>Deal with Group, SBU and Regional FD requests</li><li>Lead the preparation for the Hungarian internal and external audits.</li><li>Develop staff and identify training needs within the team. Document standard procedures.</li><li>Keeping the HSE-, fire safety- and hygiene rules, wearing the relevant personal protective equipment.</li><li>During the daily work meeting the expectations of the Integrated Management System regulations.</li></ul> Requirements: <ul><li>Educated to degree level (potentially in Finance, Accounting, or Economics); professional accounting qualification.</li><li>10 years PQ experience within a manufacturing environment is essential.</li><li>High level of numeracy and IT literate (Excel/PowerPoint).</li><li>Excellent English written and oral communication skills.</li><li>Audit background</li><li>ERP system knowledge</li><li>Project management knowledge and experience</li></ul>

Responsibilities: <ul><li>Perform and oversee complex microbiological activities, including environmental monitoring (viable and non-viable), utility sampling (e.g., water, compressed gases), and aseptic process support in areas utilizing isolator technology.</li><li>Conduct and review microbiological testing for bioburden, endotoxin (LAL), sterility, and microbial identification on raw materials, in-process samples, and final products.</li><li>Support and lead aspects of aseptic process simulations (media fills) including planning, execution, incubation, and interpretation of results within isolator systems.</li><li>Assist in the startup and qualification of the microbiology laboratory including equipment qualification, SOP development, method verification/validation, and environmental monitoring qualification.</li><li>Contribute to investigations, non-conformances, and microbiological excursions by providing subject matter expertise and supporting root cause analysis and CAPA implementation.</li><li>Ensure accurate and timely documentation of laboratory data in compliance with data integrity principles and cGMP guidelines.</li><li>Mentor and provide technical guidance to junior microbiology staff, fostering a culture of scientific excellence, compliance, and continuous learning.</li><li>Maintain laboratory readiness for internal and external audits by following and enforcing good laboratory practices and cGMP expectations.</li><li>Participate in ongoing improvements to laboratory procedures, contamination control strategies, and sterility assurance programs.</li><li>Interface cross-functionally with Quality Assurance, Manufacturing, Validation, and Engineering to support cleanroom and equipment qualifications, isolator decontamination cycles, and site expansion activities.</li></ul> Requirements: Qualifications/Experience: <ul><li>Bachelor’s degree in microbiology, Biology, Life Sciences, or a related field.</li><li>Minimum of 3-5 years of microbiology laboratory experience in a cGMP pharmaceutical or biotechnology manufacturing environment.</li><li>Experience with isolator-based sterile manufacturing processes and aseptic support activities is strongly preferred.</li><li>Working knowledge of cGMPs, FDA and EU Annex 1 requirements, and microbiological standards (USP &lt;61&gt;, &lt;62&gt;, &lt;71&gt;, &lt;85&gt;, &lt;1116&gt;).</li><li>Experience supporting laboratory equipment startup, qualification, and routine maintenance preferred.</li><li>Prior experience with high potent APIs and/or controlled substances is desirable.</li></ul> Skills/Competencies: <ul><li>Advanced technical skills in environmental monitoring, microbial testing, and aseptic processing support.</li><li>Strong documentation and data integrity skills with a meticulous attention to detail.</li><li>Demonstrated ability to troubleshoot microbiological and laboratory equipment issues.</li><li>Effective time management and prioritization skills in a fast-paced environment.</li><li>Strong communication skills with the ability to train and mentor junior staff.</li><li>Proactive, collaborative, and compliance-oriented mindset.</li><li>Comfortable working in cleanroom environments and adhering to gowning and contamination control protocols.</li></ul>

Skills

Industry

Location

Jobtitle

59 oilfield equipment Jobs found

Compounding Technician

Filling Technician

Equipment Engr - Automation and PLC

Manufacturing Engineer II - CCD Support

QC Lab Sample Coordinator

Environmental Health and Safety (EHS) Manager

Operations Manager

Quality Engineer

Finance Controller

Senior Microbiology Technician

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

59 oilfield equipment Jobs found

Compounding Technician

Filling Technician

Equipment Engr - Automation and PLC

Manufacturing Engineer II - CCD Support

QC Lab Sample Coordinator

Environmental Health and Safety (EHS) Manager

Operations Manager

Quality Engineer

Finance Controller

Senior Microbiology Technician

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.