Process Engineer - Utilities

Process Engineer - Hydrocracker

Process Engineer - Sulfur Recovery / Sour Water Stripper

Process Engineer - Utilities ( GM )

ASC Field Compliance Coordinator

Process Engineer – SRU/ SWS

Process Engineer - MPEU

Civil Engineer L2C

Responsibilities: As the successful candidate you will be required to perform the following: <ul><li>Review and monitor the performances of existing Utilities through key performance indicators (KPIs) representing the optimum operability, profitability, reliability, and process safety.&nbsp;</li><li>Issue quarterly utilities performance benchmarking reports highlighting the KPIs, analysis, and performance improvement recommendations.</li><li>Monitor and support the facilities in implementing the recommendations and closing the gaps identified in the quarterly performance benchmarking reports.&nbsp;</li><li>Conduct benchmarking and best practices exchange workshops internally among Global Manufacturing facilities (wholly-owned and affiliates).</li><li>Provide on-demand remote and/or field technical advisory support to Global Manufacturing facilities on matters concerning the operation of Utilities which may include but not limited to process design, process troubleshooting, start-up and shutdown activities and capacity test runs. Issue service report for every support activity provided highlighting the facilities need, actions taken, results, and lessons learned.</li><li>In collaboration with Global Manufacturing facilities engineers, propose cost optimization or process improvement initiatives focusing on ‘low-hanging fruits’ with no or minimal capital investment required, through operational adjustment or design modification.</li><li>Conduct internal assessments on Utilities using engineering standard references. Highlight any deviations or better standards applied by affiliates for endorsement to facility management or Central Engineering.&nbsp;</li><li>Act as the overall coordinator for cascading and driving Global Manufacturing and Corporate programs for the Utilities in the operating facilities enabling their execution and effective monitoring.&nbsp;</li><li>Participate in Business Plan development and coordinate with stakeholders for any capital investments on assigned Utilities and support techno-economic evaluations.</li><li>Be aware of Utilities technology developments in the industry and endorse the evaluation and approval to Central Engineering to facilitate field deployment.</li><li>Support arrangement and facilitation of technical knowledge exchange workshops with major equipment suppliers for Utilities and Global Manufacturing facilities.</li><li>Participate in hazard operability (HAZOP) and safety integrity level (SIL) studies as required by Utility operating facilities.</li></ul> Requirements: <ul><li>You must hold a Bachelor’s degree in Chemical Engineering or related specialization.&nbsp;</li><li>You should have a minimum of 15 years total Utilities unit experience (process engineering and operations) with at least 10 years’ experience in handling utilities.</li><li>Exposure to major equipment suppliers / package units for Utilities is preferred.</li></ul>

Responsibilities: <ul><li>We are seeking a Downstream Process Engineer specialized in Refinery Hydrocracker and/or a Diesel Hydrotreater to join Ras Tanura Refinery Engineering Department under Downstream Global Manufacturing.</li><li>The technical support team is a multi-disciplinary team provides the required high-quality technical support to GM operating facilities (Refineries, NGLF, and petrochemical plants) inside the Kingdom of Saudi Arabia &amp; across the globe.</li><li>Your primary role will be to provide process engineering and operations expertise to monitor, optimize, and drive performance improvement programs for Hydrocracker and/or Diesel Hydrotreater processes including remote and field technical advisory support, benchmarking, technology knowledge management and exchange. You will drive the performance improvement programs which enhance process safety, optimize manufacturing cost, and increase plant reliability.</li><li>As the successful candidate you will be required to perform the following:</li><li>Review and monitor the performances of existing refinery facilities through key performance indicators (KPIs) representing the process plant’s optimum operability, profitability, reliability, and process safety. Issue quarterly processes performance benchmarking reports highlighting the KPIs, analysis, and performance improvement recommendations.</li><li>Provide support services and troubleshoot any problems that arise with manufacturing.</li><li>Assist in improving the quality of products and reducing production costs.</li><li>Inspect and review operating activities and determine production schedules.</li><li>Perform optimization analysis, forecasts, economic reviews and evaluations on equipment / projects, operations and system operating strategies.</li><li>Research ways to reduce production costs, develop production goals, and create schedules and plans for individual tasks.</li><li>Devise ways to improve systems while reducing costs, ensuring that work is completed within schedule, setting and meeting deadlines, and troubleshooting any problems with the equipment / process.</li></ul> Requirements: <ul><li>As the successful candidate you must hold a Bachelor’s Degree in chemical engineering. An advanced degree is preferred.</li><li>You should have a minimum of 15 years refinery experience including; 10 years in Hydrocracker units and in Hydrotreating units.</li><li>A thorough knowledge in Catalyst Selection &amp; Evaluation is required.</li></ul>

Responsibilities: <ul><li>Review and monitor the performances of existing SRU &amp; SWS facilities through key performance indicators (KPIs) representing the process plant’s optimum operability, profitability, reliability, and process safety. </li><li>Issue quarterly SRU &amp; SWS performance benchmarking reports highlighting the KPIs, analysis, and performance improvement recommendations.&nbsp;</li><li> Monitor and support the facilities in implementing the recommendations and closing the gaps identified in the quarterly performance benchmarking reports.&nbsp;</li><li> Conduct benchmarking and best practices exchange workshops internally among Global Manufacturing facilities (wholly-owned and affiliates) having SRU &amp; SWS process technologies. Execution and deliverables of the workshops will be based on Benchmarking &amp; Best Practices Exchange Agreement among Global Manufacturing facilities.&nbsp;</li><li> Issue by-monthly SRU &amp; SWS technical best practices bulletin for sharing within Global Manufacturing facilities.&nbsp;</li><li>Provide on-demand remote and/or field technical advisory support to Global Manufacturing facilities on matters concerning the operation of SRU &amp; SWS which may include but not limited to process troubleshooting, start-up and shutdown activities, capacity test runs, technology pilot testing, and process design. </li><li>Issue service report for every support activity provided highlighting the facilities need, actions taken, results, and lessons learned.&nbsp;</li><li>In collaboration with Global Manufacturing facilities engineers, propose cost optimization or process improvement initiatives focusing on ‘low-hanging fruits’ with no or minimal capital investment required, through operational adjustment or design modification.&nbsp;</li><li>Conduct internal assessments on SRU &amp; SWS process engineering standards using engineering standard references. </li><li>Highlight any deviations or better standards applied by affiliates for endorsement to facility management or Central Engineering. </li><li>Support the implementation of relevant engineering standards to SRU &amp; SWS across Global Manufacturing upon each facility management’s approval.&nbsp;</li><li>Act as the Admin Area overall coordinator for cascading and driving Global Manufacturing and Corporate programs to the operating facilities for execution and effective monitoring.&nbsp;</li><li>Participate in Business Plan development and coordinate with stakeholders for any capital investments on assigned process units and support techno-economic evaluations.&nbsp;</li><li>Recommend and coordinate proven technology deployments in SRU &amp; SWS process units. Liaise with Global Manufacturing Excellence-Manufacturing Technical Support Division and Engineering Services for any technology assessment and piloting support.&nbsp;</li><li>Participate as subject matter experts on external benchmarking with 3rd party entities, which include but not limited to, Japan Cooperation Council Petroleum (JCCP) and Gulf Downstream Association (GDA).&nbsp;</li><li>Participate in SRU &amp; SWS hazard operability (HAZOP) and safety integrity level (SIL) studies as required by operating facilities.&nbsp;</li><li>Participate in incident investigation activities concerning SRU &amp; SWS process technologies as required by operating facilities.&nbsp;</li><li>Act as overall coordinator on any SRU &amp; SWS data required by Global Manufacturing Affiliate Affairs from wholly-owned facilities.</li></ul> Requirements: <ul><li>You must have a Bachelor’s degree in Chemical Engineering or related specialization.&nbsp;An advanced degree is preferred.</li><li>You should have a minimum of 15 years total refinery or gas plants process units experience (process engineering and operations) with at least 10 years’ experience in handling SRUs/TGTU/SWS plants.</li><li>Exposure to different SRU/TGTU process licensor technologies is a plus.</li></ul>

Responsibilities: As the successful candidate you will be required to perform the following: <ul><li>Review and monitor the performances of existing Utilities through key performance indicators (KPIs) representing the optimum operability, profitability, reliability, and process safety.</li><li>Issue quarterly utilities performance bench marking reports highlighting the KPIs, analysis, and performance improvement recommendations.</li><li>Monitor and support the facilities in implementing the recommendations and closing the gaps identified in the quarterly performance bench marking reports.</li><li>Conduct bench marking and best practices exchange workshops internally among Global Manufacturing facilities (wholly-owned and affiliates).</li><li>Provide on-demand remote and/or field technical advisory support to Global Manufacturing facilities on matters concerning the operation of Utilities which may include but not limited to process design, process troubleshooting, start-up and shutdown activities and capacity test runs. Issue service report for every support activity provided highlighting the facilities need, actions taken, results, and lessons learned.</li><li>In collaboration with Global Manufacturing facilities engineers, propose cost optimization or process improvement initiatives through operational adjustment or design modification.</li><li>Conduct internal assessments on Utilities using our client engineering standard references. Highlight any deviations or better standards applied by affiliates for endorsement to facility management or our client Central Engineering.</li><li>Act as the overall coordinator for cascading and driving Global Manufacturing and Corporate programs for the Utilities in the operating facilities enabling their execution and effective monitoring.</li><li>Participate in Business Plan development and coordinate with stakeholders for any capital investments on assigned Utilities and support techno-economic evaluations.</li><li>Be aware of Utilities technology developments in the industry and endorse the evaluation and approval to Central Engineering to facilitate field deployment.</li><li>Support arrangement and facilitation of technical knowledge exchange workshops with major equipment suppliers for Utilities and Global Manufacturing facilities.</li><li>Participate in hazard operability (HAZOP) and safety integrity level (SIL) studies as required by Utility operating facilities.</li></ul> Requirements: <ul><li>You must hold a Bachelor’s degree in Chemical Engineering or related specialization.&nbsp;</li><li>You should have a minimum of 15 years total Utilities unit experience (process engineering and operations) with at least 10 years’ experience in handling utilities.</li><li>Exposure to major equipment suppliers / package units for Utilities is preferred.</li></ul>

Responsibilities: <ul><li class="ql-align-justify">Review and monitor the performances of existing refinery facilities through key performance indicators (KPIs) representing the process plant’s optimum operability, profitability, reliability, and process safety. Issue quarterly processes performance benchmarking reports highlighting the KPIs, analysis, and performance improvement recommendations.</li><li>Provide support services and troubleshoot any problems that arise with manufacturing.</li><li>Assist in improving the quality of products and reducing production costs.</li><li>Inspect and review operating activities and determine production schedules.</li><li>Perform optimization analysis, forecasts, economic reviews and evaluations on equipment / projects, operations and system operating strategies.</li><li>Research ways to reduce production costs, develop production goals, and create schedules and plans for individual tasks.</li><li>Devise ways to improve systems while reducing costs, ensuring that work is completed within schedule, setting and meeting deadlines, and troubleshooting any problems with the equipment / process.</li></ul> Requirements: <ul><li>As the successful candidate you must hold a Bachelor’s Degree in chemical engineering. An advanced degree is preferred.</li><li>You should have a minimum of 10 years refinery experience including at least 4 years in Hydrocracker units and 2 in Hydrotreating units.</li><li>A thorough knowledge in Catalyst Selection &amp; Evaluation is required.</li></ul>

Responsibilities: The candidate will be required to perform the following: <ul><li>Enhance Business line safety standards and general procedures such as work permit, process safety, hazards identification, risk management, emergency preparedness etc.</li><li>Developing loss prevention, fire prevention and safety standards, procedures and General Instructions (GIs) for matters not already addressed by existing resources.</li><li>Providing advice and consultation to Upstream management as requested to facilitate Safety Management System (SMS) enhancement.</li><li>Develop critical safety documents for major activities such as job safety analysis and hazards identification plans.</li><li>Assisting departments in preparing for major safety review such as loss prevention compliance reviews.</li><li>Researches emerging safety technologies and conducts feasibility studies and cost analyses to identify improved solutions to existing safety problems and emerging regulatory requirements.</li><li>Acting as an expert process safety resource for risk identification and mitigation during design, construction, commissioning, turn-over to operations, on-going operations, management of change and decommissioning of facilities.</li><li>Developing and delivering safety training materials and safe work procedures to the field personnel.</li><li>Instructing on safety concepts, practices and standards (both on-the-job and classroom based).</li><li>Directing and participating in the preparation of major reference manuals documenting corporate and LPD safety systems, policies, and procedures (e.g., LP Policy, SMS manual, Safety Handbook, Construction Safety Manual). Reviews related high-level documents from other organizations or outside parties with potential to impact the safety of company operations as required.</li><li>Facilitating and leading incident investigations including interviewing witnesses, data gathering and verification and implement a root cause analysis.</li><li>Facilitating and leading safety audits by identifying areas of non-compliance with occupational health and safety regulations and advise on how to improve existing conditions.</li></ul> Requirements: <ul><li>Post graduate degree in process safety and loss prevention from an internationally recognized institution.</li><li>A bachelor degree in preferably chemical or mechanical engineering.</li><li>Certified Safety Professional from Board of Certified Safety Professionals or equivalent (NEBOSH Diploma).</li><li>Master degree or PHD is recommended.</li><li>A minimum of 15 years’ experience working in operations for oil, gas, petrochemical plants or refineries, with clear evidence of having delivered major impact in this capacity.</li><li>A minimum of 5 years’ experience working in a senior position as a Loss Prevention and Fire Prevention expert, with clear evidence of having delivered major impact in this capacity.</li><li>Strong technical expertise in the area of process safety, e.g. design engineering, loss control management, hazard identification, hazard and operability reviews, incident investigations, emergency preparedness and response, safety management systems.</li><li>Extensive experience leading and participating in HAZOP and SIL studies with internationally recognized certifications.</li><li>Extensive experience working in organizations that have diversified manufacturing plants.</li><li>Must be able to work with minimum supervision on relatively unstructured tasks. Must have the demonstrated ability to produce top quality written and oral reports.</li><li>Excellent command of oral and written English.</li></ul>

Responsibilities: As the successful candidate you will be required to perform the following: <ul><li>Review and monitor the performances of existing SRU &amp; SWS facilities through key performance indicators (KPIs) representing the process plant’s optimum operability, profitability, reliability, and process safety. </li><li>Issue quarterly SRU &amp; SWS performance benchmarking reports highlighting the KPIs, analysis, and performance improvement recommendations.&nbsp;</li><li>Monitor and support the facilities in implementing the recommendations and closing the gaps identified in the quarterly performance benchmarking reports.&nbsp;</li><li>Conduct benchmarking and best practices exchange workshops internally among Global Manufacturing facilities (wholly-owned and affiliates) having SRU &amp; SWS process technologies. Execution and deliverables of the workshops will be based on Benchmarking &amp; Best Practices Exchange Agreement among Global Manufacturing facilities.&nbsp;</li><li>Issue by-monthly SRU &amp; SWS technical best practices bulletin for sharing within Global Manufacturing facilities.&nbsp;</li><li>Provide on-demand remote and/or field technical advisory support to Global Manufacturing facilities on matters concerning the operation of SRU &amp; SWS which may include but not limited to process troubleshooting, start-up and shutdown activities, capacity test runs, technology pilot testing, and process design. </li><li>Issue service report for every support activity provided highlighting the facilities need, actions taken, results, and lessons learned.&nbsp;</li><li>In collaboration with Global Manufacturing facilities engineers, propose cost optimization or process improvement initiatives focusing on ‘low-hanging fruits’ with no or minimal capital investment required, through operational adjustment or design modification.&nbsp;</li><li>Conduct internal assessments on SRU &amp; SWS process engineering standards using the company engineering standard references.</li><li> Highlight any deviations or better standards applied by affiliates for endorsement to facility management or the company Central Engineering. Support the implementation of relevant engineering standards to SRU &amp; SWS across Global Manufacturing upon each facility management’s approval.&nbsp;</li><li>Act as the Admin Area overall coordinator for cascading and driving Global Manufacturing and Corporate programs to the operating facilities for execution and effective monitoring.&nbsp;</li><li>Participate in Business Plan development and coordinate with stakeholders for any capital investments on assigned process units and support techno-economic evaluations.&nbsp;</li><li>Recommend and coordinate proven technology deployments in SRU &amp; SWS process units. Liaise with Global Manufacturing Excellence-Manufacturing Technical Support Division and Engineering Services for any technology assessment and piloting support.&nbsp;</li><li>Participate as subject matter experts on external benchmarking with 3rd party entities, which include but not limited to, Japan Cooperation Council Petroleum (JCCP) and Gulf Downstream Association (GDA).&nbsp;</li><li>Participate in SRU &amp; SWS hazard operability (HAZOP) and safety integrity level (SIL) studies as required by operating facilities.&nbsp;</li><li>Participate in incident investigation activities concerning SRU &amp; SWS process technologies as required by operating facilities.&nbsp;</li><li>Act as overall coordinator on any SRU &amp; SWS data required by Global Manufacturing Affiliate Affairs from the company wholly-owned facilities.</li></ul>&nbsp;Requirements: <ul><li>You must have a Bachelor’s Degree in Chemical Engineering or related specialization. An advanced degree is preferred.</li><li>You should have a minimum of 15 years total refinery or gas plants process units experience (process engineering and operations) with at least 10 years’ experience in handling SRUs/TGTU/SWS plants.</li><li>Exposure to different SRU/TGTU process licensor technologies is a plus.</li></ul>

Responsibilities: <ul><li>Review and monitor the performances of existing Utilities through key performance indicators (KPIs) representing the optimum operability, profitability, reliability, and process safety.&nbsp;</li><li>Issue quarterly utilities performance benchmarking reports highlighting the KPIs, analysis, and performance improvement recommendations.</li><li>Monitor and support the facilities in implementing the recommendations and closing the gaps identified in the quarterly performance benchmarking reports.&nbsp;</li><li>Conduct benchmarking and best practices exchange workshops internally among Global Manufacturing facilities (wholly-owned and affiliates).</li><li>Provide on-demand remote and/or field technical advisory support to Global Manufacturing facilities on matters concerning the operation of Utilities which may include but not limited to process design, process troubleshooting, start-up and shutdown activities and capacity test runs.</li><li>Issue service report for every support activity provided highlighting the facilities need, actions taken, results, and lessons learned.</li><li>In collaboration with Global Manufacturing facilities engineers, propose cost optimization or process improvement initiatives focusing on ‘low-hanging fruits’ with no or minimal capital investment required, through operational adjustment or design modification.</li><li>Conduct internal assessments on Utilities using our partners engineering standard references.</li><li>Highlight any deviations or better standards applied by affiliates for endorsement to facility management or our partners Central Engineering.&nbsp;</li><li>Act as the overall coordinator for cascading and driving Global Manufacturing and Corporate programs for the Utilities in the operating facilities enabling their execution and effective monitoring.&nbsp;</li><li>Participate in Business Plan development and coordinate with stakeholders for any capital investments on assigned Utilities and support techno-economic evaluations.</li><li>Be aware of Utilities technology developments in the industry and endorse the evaluation and approval to Central Engineering to facilitate field deployment.</li><li>Support arrangement and facilitation of technical knowledge exchange workshops with major equipment suppliers for Utilities and Global Manufacturing facilities.</li><li>Participate in hazard operability (HAZOP) and safety integrity level (SIL) studies as required by Utility operating facilities.</li></ul> Requirements: <ul><li>You must hold a Bachelor’s degree in Chemical Engineering or related specialization.</li><li>You should have a minimum of 15 years total Utilities unit experience (process engineering and operations) with at least 10 years’ experience in handling utilities.</li><li>Exposure to major equipment suppliers / package units for Utilities is preferred.</li></ul> Working environment: <ul><li>Our Partners high-performing employees are drawn by the challenging and rewarding professional, technical, and industrial opportunities they offer, and are remunerated accordingly.</li><li>At our partner, their people work on truly world-scale projects, supported by investment in capital and technology that is second to none.</li><li>And because, as a global energy company, they are faced with addressing some of the world’s biggest technical, logistical, and environmental challenges, they invest heavily in talent development.</li><li>Our partner has a proud history of educating and training their workforce over many decades.</li><li>Employees at all levels are encouraged to improve their sector-specific knowledge and competencies through the workforce development program – one of the largest in the world.</li></ul> Other Information: <ul><li>Our partner occupies a unique position in the global energy industry.&nbsp;</li><li>They are the worlds largest producer of hydrocarbons (oil and gas), with the lowest upstream carbon intensity of any major producer.&nbsp;</li><li>With their significant investment in technology and infrastructure, they strive to maximize the value of the energy they produce for the world along with a commitment to enhance our partners value to society.</li><li>Headquartered in the Kingdom of Saudi Arabia, and with offices around the world, they combine market discipline with a generations’ spanning view of the future, born of their nine decades experience as responsible stewards of the Kingdom’s vast hydrocarbon resources.</li><li>This responsibility has driven our partner to deliver significant societal and economic benefits to not just the Kingdom, but also to a vast number of communities, economies, and countries that rely on the vital and reliable energy that they supply.</li></ul> Organization Overview:&nbsp; <ul><li>We are seeking a Downstream Process Engineer with experience in Utilities processes (GTGs, STGs, Desalinating water unit, Raw water unit, Power generation, Boilers, Cooling water, Demineralized Water, Boiler feedwater, Waste water treatment facilities and recovery, Nitrogen generation &amp; storage, flares, etc) to join our Global Manufacturing Excellence organization under the Downstream Global Manufacturing Support Department (GMSD).</li><li>GMSD’s technical team is a multi-disciplinary team provides the required high-quality technical support to GM operating facilities (Refineries, NGLF, and petrochemical plants) inside the Kingdom of Saudi Arabia &amp; across the globe.</li><li>Your primary role will be to provide process engineering and operations expertise to monitor, optimize, and drive performance improvement programs for Utilities, including remote and field technical advisory support and benchmarking of utilities. You will drive the performance improvement programs which enhance process safety, optimize manufacturing cost, and increase utilities reliability.</li></ul>

Responsibilities: As the successful candidate you will be required to perform the following:&nbsp; <ul><li>Review and monitor the performances of existing MEROX manufacturing facilities through key performance indicators (KPIs) representing the process plant’s optimum operability, profitability, reliability, energy efficiency and process safety etc.</li><li>Issue quarterly MEROX process unit performance benchmarking reports highlighting the KPIs, analysis, and performance improvement recommendations.</li><li>Monitor and support the facilities in implementing the recommendations and closing the gaps identified in the quarterly performance benchmarking reports.</li><li>Perform in-depth plant monitoring and optimize performance of MEROX units by overseeing unit’s operation and economics losses.</li><li>Conduct benchmarking and best practices exchange workshops internally among Global Manufacturing facilities (wholly-owned and affiliates) having MEROX process.</li><li>Provide on-demand remote and/or field technical advisory support to Global Manufacturing facilities on matters concerning the operation of MEROX plants which may include but not limited to process troubleshooting, start-up and shutdown activities, capacity test runs, technology pilot testing, and process design improvements.</li><li>Issue service report for every support activity provided highlighting the facilities need, actions taken, results, and lessons learned.</li><li>Conduct internal assessments on MEROX process engineering standard using our client engineering standard references.</li><li>Highlight any deviations or better standards applied by affiliates for endorsement to facility management or our client Central Engineering</li><li>Participate in Business Plan development and coordinate with stakeholders for any capital investments on assigned process units and support techno-economic evaluations.</li><li>Maintain relevant knowledge of technology developments in the MEROX process.</li><li>Perform evaluation and approval of technology developments to Central Engineering and facilitate field deployment.</li><li>Support arrangement and facilitation of technical knowledge exchange workshops with MEROX process technology licensors and Global Manufacturing facilities.</li><li>Participate in hazard operability (HAZOP) and safety integrity level (SIL) studies as required by MEROX unit operating facilities.</li><li>Participate in incident investigation activities concerning MEROX process units as required by operating facilities.</li><li>Lead unit operations troubleshooting and investigating off-spec. products and plant trips/ upsets and manage the required deliverables.</li><li>Support Operations during turnaround and unplanned Shutdowns / Startups by understanding the unit operating conditions and transient effects to recommend operations improvements</li><li>Manage long and short-term projects by proposing major projects to improve safety, reliability and profitability. Prepare design requests, budget justifications and detailed implementation plans for economically justifiable projects.</li><li>Develop engineering design packages for in-house process-oriented projects and follow up on implementation.</li><li>Liaise with vendors and technology licensors for process enhancements and changes as well as with Engineering Services Department for any technology assessment and piloting support.</li><li>Perform benchmarking and best practices technical exchange workshops internally among Global Manufacturing facilities (wholly-owned and affiliates) having MEROX process units.&nbsp;</li></ul> Requirements: <ul><li>You must hold a Bachelor’s degree in Chemical Engineering or related specialization.</li><li>An advanced degree is preferred.</li><li>You should have a minimum of 15 years’ experience within a refinery or petrochemical process unit (process engineering and operations) with at least 10 years’ experience in handling MEROX plants.</li><li>Exposure to different MEROX process licensor technologies is preferred.</li><li>You should be able to demonstrate strong mentorship skills with the ability and drive to guide the development of junior engineers that you will interact with.</li><li>Familiarity and understanding of the best practices, design principles, international engineering standards and specifications relevant to operation of the concerned process units.</li></ul>

Responsibilities:&nbsp; <ul><li>Participate in refinery and petrochemical unit’s Flawless project delivery, stat up, Operation philosophy, and operation general instruction.&nbsp;</li><li>Provide technical support for petrochemical unit’s operation readiness, pre-commissioning and commissioning including start-up philosophy and spare part requirements&nbsp;</li><li>Participate in petrochemical unit’s Performance Acceptance Test (PAT), Reliability Availability Maintainability (RAM) study.&nbsp;</li><li>Participate in standards reviews to assure inclusion of requirements that are of practical benefit to field operation and maintenance in regard to safety and efficiency of the plants. Provides guidance on standards development through technical committee participation. Interprets standards and recommends changes to reduce costs associated with overly stringent requirements.</li><li>Review and update refinery and petrochemical redline civil drawings.&nbsp;</li><li>Provide technical support for capital projects involving petrochemical units at various stages of the project life cycle (pre-feasibility, feasibility, Pre-feed, feed basic design, detailed engineering and construction).</li><li>Participate in petrochemical unit’s process optimization and synergy between refinery and petrochemical</li><li>Develop and implements strategies and programs to enhance plant availability and to reduce operating and maintenance costs; this includes the application of new technology.</li><li>Develop and review foundation details, load assessments, stress analysis, data sheet, geotechnical report, structural analysis and design software (e.g. SACS, STAAD Pro, CAP).&nbsp;</li><li>Develop Constructability and determine the most optimum construction methodologies to be applied for a project in consideration of the projects’ technical characteristics and design options like modulation, affected by environmental conditions such as site location(s), economic and political circumstances (location factors), cost and schedule and quality requirements.&nbsp;</li><li>Researching new technologies, regulations, and other factors that may affect business model and reliability&nbsp;</li><li>Strong experience in Refinery-Chemicals integration strategies, competitiveness and benchmarking&nbsp;</li><li>Provide technical input to LP and economics modeling and capital efficiency.</li><li>Provide insights and recommendations in the financial models output and ability to guide management to select the best configurations for LTC projects cases.</li><li>Deliver the tools, templates and systems to ensure the safe, passionately and flawlessly delivery of the project.</li><li>Liaison between Project Management and technical disciplines to achieve integration across all project disciplines. Ensure scope, risk and interfaces are captured, manage Interfaces between internal and external parties and documented. Interface regularly with equipment vendors to resolve current problems as well as introduce and apply new technologies. Liaise with site to ensure suitability of civil equipment technical selections for maintainability and operability. Assist in development, implementation and ensure quality and integrating process.</li></ul> Requirements:&nbsp; <ul><li>Bachelor’s degree in in the field of Civil /Structural Engineering preferred advanced degree.</li><li>At least 15 years of experience with a focus in the Refining &amp; Petrochemicals Operation.</li></ul>

Skills

Industry

Location

Jobtitle

13 operability Jobs found

Process Engineer - Utilities

Process Engineer - Hydrocracker

Process Engineer - Sulfur Recovery / Sour Water Stripper

Process Engineer - Utilities ( GM )

Process Engineer - Hydrocracker

ASC Field Compliance Coordinator

Process Engineer – SRU/ SWS

Process Engineer - Utilities

Process Engineer - MPEU

Civil Engineer L2C

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

13 operability Jobs found

Process Engineer - Utilities

Process Engineer - Hydrocracker

Process Engineer - Sulfur Recovery / Sour Water Stripper

Process Engineer - Utilities ( GM )

Process Engineer - Hydrocracker

ASC Field Compliance Coordinator

Process Engineer – SRU/ SWS

Process Engineer - Utilities

Process Engineer - MPEU

Civil Engineer L2C

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.