EMEA Field Service Power Distribution Lead Engineer- Switchgear

Software Engineer - React

Sr. Software Engineer - Ag & Trading .Net

Packaging Technician

Senior Product Development Engineer

Staff Manufacturing Engineer – Bulk Cable

Product Engineer II

Sr. Manufacturing & Process Development Engineer

Data Engineer, Senior

Supervisor Assembly III

Overview: <ul><li>On-site customer work across the EMEA region (Data Centers, Utilities, Oil &amp; Gas) Remote work handling administrative and planning tasks</li><li>Candidates can be based in Ireland, the UK, Netherlands, Poland, or Romania, ideally near a major airport.</li></ul> Responsibilities: <ul><li>Lead installation, maintenance, commissioning, testing, and fault-finding of MV and HV equipment</li><li>Lead installation projects, oversee third-party providers, support fellow engineers, and ensure equipment operates at optimal performance.</li><li>Perform site testing (e.g., insulation resistance, primary/secondary injection, functional testing)</li><li>Provide advanced technical support and root cause analysis for complex power distribution fault</li><li>Review and approve service documentation, test reports, and commissioning records</li><li>Act as the primary customer contact during project execution</li><li>Support and mentor service engineers, promoting safety and best practices</li><li>Collaborate with project teams to meet delivery targets and ensure customer satisfaction</li></ul> Requirements: <ul><li>Higher Diploma or Degree in Electrical Engineering</li><li>Proven experience in power distribution testing and commissioning</li><li>Ability to test and commission large MV to HV installations</li><li>Experience with protection relay programming</li><li>Strong IT skills and attention to detail</li><li>This is a hands-on, customer-facing position suited for candidates with a strong technical background. Skills:</li><li>Strong troubleshooting and problem-solving abilities</li><li>Leadership mindset with the ability to coach and develop others</li><li>Flexibility to travel extensively across the EMEA region</li></ul>

Responsibilities: <ul><li>SOFTWARE DEVELOPMENT: Partners to design and develop high quality software solutions by writing clean,maintainable and efficient codes.</li><li>AUTOMATION: Applies internal software deployment platform, methodologies and tools to automate thedeployment process, ensuring smooth and reliable releases.</li><li>COLLABORATION: Partners with cross functional team of product managers, designers and other engineersto gather moderately complex requirements and deliver solutions that meet business needs.</li><li>TESTING &amp; DEBUGGING: Writes and maintains moderately complex unit tests and integration tests, andperforms debugging to maintain the quality and performance of the software.</li><li>CONTINUOUS IMPROVEMENT: Makes suggestions for improving the software development and deploymentprocesses, and implements the approved standards to improve efficiency and reliability.</li><li>DOCUMENTATION: Drafts and maintains comprehensive documentation for moderately complex softwareapplications, deployment processes and system configurations.</li><li>TECHNICAL SUPPORT: Provides technical support and troubleshooting for moderately complex issues withdeployed applications to ensure minimal downtime and fast resolution.</li></ul> Requirements: <ul><li>Some experience in React, including hooks, context API, and state management libraries (Redux, Zustand)</li><li>Solid experience with JavaScript (ES6+), TypeScript, HTML5, CSS3.</li><li>Strong experience with C# and .NET Framework/.NET Core.</li><li>Solid understanding of object-oriented programming.</li><li>Experience with unit testing and mocking frameworks (e.g., xUnit, NUnit, Moq).</li><li>Familiarity with design patterns (e.g., Repository, Factory, Strategy).</li><li>Experience with SQL DBs, MySQL, Postgres, or MS SQL: writing queries, stored procedures, and performancetuning.</li><li>Knowledge of RESTful APIs and message-based systems.</li><li>Experience with relational databases and data access libraries (e.g., Entity Framework, Dapper).</li><li>Knowledge of ReactJS</li><li>Proficient in Git: branching, merging, pull requests, and version control workflows.</li><li>Fluent English level</li><li>Please attach your CV in English when applying for the position</li></ul>

Responsibilities: <ul><li>Demonstrate accountability by ensuring timely and high-quality project delivery.</li><li>Be result driven, consistently achieving measurable outcomes and meeting goals.</li><li>Act as a team player, collaborating effectively with cross-functional teams.</li><li>Exhibit a can-do mentality, tackling challenges with a proactive and positive approach.</li><li>Apply software engineering patterns and principles to design, develop, test, integrate, maintain, troubleshoot and document complex and varied software solutions and incorporate security practices in newly developed and maintained applications.</li><li>Participate in peer code review sessions to review code, coach peers and ensure code quality.</li><li>Take the lead in the assigned agile team to adopt agile philosophies, facilitate agile ceremonies and identify continuous improvement opportunities.</li><li>Incorporate the companys engineering and development best practices within the full software development lifecycle including coding standards, code reviews, source control management, building processes, testing and security principles, to deliver high quality code rapidly.</li><li>Collaborate to lead demonstration and continuous feedback sessions to improve development and help drive the long term vision.</li><li>Participate in the engineering community by maintaining and sharing relevant technical approaches and modern skills.</li><li>Independently handle complex issues with minimal supervision, while escalating only the most complex issues to appropriate staff.</li><li>Other duties as assigned</li></ul> Requirements: <ul><li>Bachelor’s degree in a related field or equivalent experience</li><li>Confirmed experience automating pipelines for continuous integration, testing, delivery and security.</li><li>Confirmed experience architecting applications, databases, services or integrations.</li><li>Extensive experience with .NET Framework and .NET Core.</li><li>Familiarity with front-end technologies like HTML, CSS, JavaScript, and frameworks such as Angular, React, or Vue.js.</li><li>Experience with DevOps practices and tools such as Docker and CI/CD pipelines.</li><li>Knowledge of SQL Server and / or PostgreSQL for database design and management.</li><li>Hands-on experience with Kubernetes for container orchestration and management.</li><li>Experience with cloud platforms such as Azure, AWS, or GCP.</li><li>Minimum of 5 years of related work experience in software development using .NET technologies.</li></ul>

Role Description: <ul><li>The Production Technician II is an advanced-level technician role responsible for sterile pharmaceutical manufacturing operations, with additional expectations for technical troubleshooting, routine maintenance, and active support of qualification activities.</li><li>This position operates in an isolator-based manufacturing environment, works with high potent APIs and controlled substances, and plays a key role in ensuring compliance with cGMP, safety, and site procedures. </li><li>The Production Technician II serves as a technical resource within the production team and supports continuous improvement of manufacturing processes.</li></ul> Responsibilities: <ul><li>Operate, monitor, and adjust sterile manufacturing equipment for formulation, filling, and packaging of IV bag products in compliance with SOPs, cGMP, and safety requirements.</li><li>Perform routine preventive maintenance and minor repairs on production equipment to maintain optimal operating conditions.</li><li>Serve as first-line troubleshooting support for equipment and process issues, escalating to engineering or maintenance as required.</li><li>Support equipment and process qualifications, including protocol review, execution participation, and documentation completion.</li><li>Assist in the creation, revision, and implementation of SOPs and production-related procedures.</li><li>Provide training, guidance, and on-the-job support to Production Technician I personnel.</li><li>Perform cleaning, changeover, and line clearance activities to maintain manufacturing operations.</li><li>Accurately complete batch records, logbooks, and production documentation in compliance with data integrity requirements and cGMP practices.</li><li>Review documentation completed by fellow members of the production team.</li><li>Collaborate with Quality Assurance during in-process checks, deviation investigations, and CAPA activities.</li><li>Adhere to DEA and site procedures for controlled substance handling, including documentation and security protocols.</li><li>Work closely with cross-functional teams including Engineering, Validation, and Quality to support operational readiness.</li><li>Operate isolator technology, including performing and verifying sanitization steps, and supporting advanced troubleshooting.</li><li>Ensure controlled substances are handled, documented, and stored per DEA and site requirements.</li><li>Participate in continuous improvement and lean manufacturing initiatives to enhance safety, quality, and efficiency.</li></ul> Requirements: Qualifications/Experience <ul><li>High school diploma or equivalent required; associate degree or technical certification in a mechanical, engineering, or life sciences discipline preferred.</li><li>Minimum of 5 years’ experience in pharmaceutical or regulated manufacturing in areas of compounding, filling, inspection, and secondary packaging.</li><li>Experience with sterile products or IV bag production preferred.</li><li>Demonstrated mechanical aptitude with hands-on equipment troubleshooting and maintenance skills.</li><li>Knowledge of cGMP, aseptic processing, and controlled substance handling requirements.</li><li>Minimum of 3 years’ experience working with automated production equipment utilizing HMI or SCADA interface required.</li><li>Experience with isolator-based manufacturing strongly preferred.</li><li>Experience reading and following technical documents such as SOPs, maintenance procedures, electrical drawings, equipment arrangements, piping diagrams, and qualification protocols</li></ul> Skills/Competencies <ul><li>Demonstrated problem-solving and mechanical troubleshooting skills.</li><li>Ability to mentor and train less experienced technicians.</li><li>Excellent attention to detail and documentation accuracy.</li><li>Effective communication and teamwork skills.</li><li>Commitment to safety, quality, and data integrity.</li><li>At home working in cleanroom environments with PPE requirements.</li></ul>

Responsibilities: <ul><li>Manage the complete product development life cycle (starting from voice of customer, ideation, Design Conceptualization, Creation of product specifications, 3D design, Prototyping, Product testing, Product qualification, Project Execution &amp; Sustenance till product end of life)</li><li>Build a deep understanding of market and customer needs by fostering a connection between the business engineering teams and the customer engineering teams</li><li>Work closely with customer/sales/PM in getting the right and clear VOC (voice of customer), make engineering evaluation/proposal to customer.</li><li>Maintain a System level understanding of customer application and the cable design/concept necessary for providing a solution to the customers’ expectation.</li><li>Follow LEANPD Project Process to support project team from PDE perspective to complete Project (NPI or Sustaining) on time, quality and budget.&nbsp;</li><li>Drive the development and release of product, scale-up through stage-gate reviews, ensuring milestone commitments are maintained.</li><li>Technical support to customer, sales, PM and plant team.&nbsp;</li><li>Conduct necessary test, engineering analysis, trouble shooting and verification.</li><li>Work with global manufacturing resources, procurement, and outside suppliers to meet all company technical, quality, and cost objectives</li><li>Introduce breakthrough technologies by partnering technically with our customers worldwide and with our company Global competency centers to enhance business revenue &amp; growth.</li></ul> Requirements: <ul><li>Bachelor degree (Mechanical) required and Master is preferred</li><li>Knowledge about various phases of product realization and product development</li><li>Knowledge of state-of-the-art design tools such as 3D Computer Aided Design (CAD), modelling, Geometric Dimension &amp; Tolerancing (GD&amp;T), electrical &amp; electronic design and Simulation</li><li>Basic knowledge in manufacturing process (machining, molding, stamping, plating, etc.) will be a plus.</li><li>Basic knowledge in material (metal/plastic) properties will be a plus.</li><li>Knowledge of power distribution system and connection components.</li><li>Familiarity with power safety standards and agency approval of power connector/cable/cable assembly.</li><li>Basic FEA simulation on mechanical, mold-flow, and Thermal.</li><li>Familiarity with quality tools (FMEA, 6sigma, DOE, 8D…) will be a plus.</li><li>10+ years working experience as new product development related position and 5+ years of working experience on product developing of RF Products/Antennas.</li><li>Connector, especially Power/Industrial/Auto connector design background will be a plus.</li><li>Experience on power distribution inter/intra system is required.</li><li>This position is highly technical and requires an individual who can work independently.</li><li>Experience on product compliance certification (Product, Safety, Environment substance control)</li><li>Experience in design for manufacturing and assembly (DFMA), design for cost (DFC), design for manufacturing (DFM)</li><li>Application Engineering: Ability to understand customer requirements &amp; offer engineering solutions</li><li>Engineering management across cross functional teams: Developing technical roadmaps to align with market direction &amp; communicating it across business units, management &amp; customers to share applicable technology</li><li>Working together with global team.</li><li>Optimizing engineering &amp; innovation: Defining &amp; managing IP strategy &amp; constantly improving products through R&amp;D</li><li>Quick learning capability: Acquire the necessary skill set, assuring succession &amp; phase in the organization, procedure and culture.</li><li>Quality controller: Ability to assure quality for services, documents and prints.</li><li>Good presentation skills with usage of PowerPoint</li></ul>

Responsibilities: Core / Daily Operations: <ul><li>Serve as SME for molding and cable over-molding processes</li><li>Develop, optimize, and validate manufacturing parameters and tooling</li><li>Participate in daily operations meetings to resolve process issues quickly</li><li>Ensure processes meet efficiency, quality, and output targets</li><li>Drive improvements in safety, quality, delivery, OEE, scrap, and cost using our client methodologies</li></ul> NPI &amp; Projects: <ul><li>Collaborate with Project Managers on New Product Introduction (NPI) and industrialization</li><li>Develop cost improvement roadmaps for molding, extrusion, and related technologies</li><li>Perform ROI analysis and track cost savings using our client system</li><li>Support annual cost-saving and productivity targets</li></ul> Leadership &amp; Development: <ul><li>Lead and mentor a team of 7–9 engineers/technicians</li><li>Build internal expertise in molding and related processes</li><li>Standardize processes and deliver technical training for production and NPI</li></ul> Technical &amp; Compliance: <ul><li>Support design and development of manufacturing tools and equipment</li><li>Ensure compliance with Health, Safety, and Environmental standards</li><li>Stay updated on new molding and automation technologies</li><li>Act as the regional point of contact for molding-related technical issues</li></ul>&nbsp;Requirements: Education <ul><li>Bachelor’s degree in Mechanical, Electrical, Manufacturing Engineering, or related field</li><li>Master’s degree (automation background) is a plus</li></ul> Experience <ul><li>Minimum 8+ years in manufacturing and molding processes</li><li>Strong experience in cable over-molding and extrusion</li></ul>

Responsibilities: Performance &amp; Continuous Improvement: <ul><li>Maintain and improve existing products, processes, and specifications</li><li>Drive quality improvements and cost reduction initiatives</li><li>Support product extensions to meet specific customer requirements</li></ul> Daily &amp; Ongoing Activities: <ul><li>Manage engineering change processes (ECR/ECN)</li><li>Lead Product Change Notifications (PCN) to customers</li><li>Conduct root cause analysis and implement corrective actions</li><li>Redesign products to resolve customer complaints and manufacturing challenges</li><li>Coordinate with cross-functional teams for seamless implementation</li></ul> Periodic Responsibilities; <ul><li>Support supplier development and consolidation initiatives</li><li>Participate in A3 problem-solving, Material Review Board, and Rapid Response Board</li><li>Assist manufacturing facilities with processing issues</li><li>Collaborate with product management, sales, and customer service teams</li><li>Develop and execute product testing plans</li><li>Ensure compliance with military specifications (MIL-STD)</li></ul>&nbsp;Requirements: Education <ul><li>Bachelor’s Degree in Mechanical Engineering, Mechatronics Engineering, or equivalent</li></ul> Experience &amp; Skills <ul><li>2–3 years in product engineering or packaging engineering</li></ul> Strong expertise in: <ul><li>3D Modeling (CREO / SolidWorks / Pro-E)</li><li>GD&amp;T (Geometric Dimensioning &amp; Tolerancing)</li><li>Engineering Change Management (ECR/ECN/PCN)</li><li>Lean Manufacturing &amp; Continuous Improvement</li><li>Root Cause Analysis (A3 / 8D methodologies)</li><li>Supplier Development</li><li>Microsoft Office tools</li><li>Knowledge of military specifications (MIL-STD) is a strong advantage&nbsp;</li></ul>

Responsibilities: Automation &amp; Process Development <ul><li>Lead end-to-end development of automation systems, including concept design, hardware/software selection, prototyping, testing, validation, and full-scale implementation.</li><li>Conduct hands-on experimental trials to validate manufacturing processes and gather performance data.</li><li>Collaborate with Product Development teams to ensure designs align with automation and manufacturability standards.</li><li>Develop engineering specifications, preliminary designs, and support pre-production builds and testing.</li></ul> Process Optimization &amp; Problem Solving <ul><li>Apply data-driven methodologies such as Six Sigma, DMAIC, and 8D to identify root causes and improve process capability.</li><li>Analyze yield and process data to develop optimization strategies and enhance efficiency.</li><li>Research and implement new technologies and manufacturing techniques to improve quality and reduce costs.</li></ul> Project &amp; Stakeholder Management <ul><li>Manage multiple engineering projects simultaneously in a fast-paced environment.</li><li>Collaborate with vendors and cross-functional teams to support automation and process development initiatives.</li><li>Provide technical leadership and communicate complex concepts effectively to stakeholders.</li></ul> Documentation &amp; Innovation <ul><li>Prepare detailed technical documentation, design drawings, and process implementation requirements.</li><li>Support submission of invention disclosures for innovative concepts.</li><li>Contribute to the development and deployment of next-generation manufacturing technologies, including AI-driven solutions.</li></ul> Requirements: Education <ul><li>Bachelor’s degree in Electrical, Mechanical, Robotics, Mechatronics, or Electro-Mechanical Engineering (minimum).</li></ul> Experience <ul><li>5–7 years of experience in automation systems and manufacturing engineering.</li><li>Proven experience leading automation projects from concept to implementation.</li></ul> Technical Skills <ul><li>Automation systems: PLCs, HMIs, VFDs, servo motors, sensors, and actuators</li><li>PLC programming: Omron, Siemens, Allen-Bradley</li><li>Industrial robotics troubleshooting: KUKA, ABB, EPSON</li><li>Vision systems: Keyence, Cognex</li><li>CAD tools: Creo, SolidWorks, AutoCAD (2D &amp; 3D)</li><li>Strong electrical and electronic troubleshooting skills</li><li>Experience with Six Sigma / DMAIC / 8D methodologies</li><li>Exposure to Artificial Intelligence (preferred)</li></ul>

Responsibilities: <ul><li>Design, develop and deploy process automation workflows to support Smart Factory operation.</li><li>Extract, transform and analyze data into accurate, meaningful and actionable reports to support operational and business decision making, such as yield reports with data visualizations and recommendations.</li><li>Play a role as a bridge between business, IT and vendor(s) to support new loaders, functionalities and enhancements for Yield Management System such as Discover Yield tools, Tableau dashboards as well as Advanced Yield Examination internal tools.</li><li>With Product and Process knowledge, ensure data integrity for YMS tools.</li><li>Combine statistics, machine learning and computer science to turn data into actionable insights for solving complex process issue(s).</li><li>Design, build and maintain Predictive AI Models to enable proactive decision-making.</li></ul> Requirements: <ul><li>Bachelor’s Degree in Computer Science or&nbsp;Electronic/Electrical Engineering, with min. 2 years’ experience in Data Analytics field.</li><li>Proficiency in SQL and experience working with relational databases.</li><li>Strong working knowledge of statistics and its applications.</li><li>Experience in building automated reports.</li></ul>

Role Description: <ul><li>Plans and establishes production work schedule to meet delivery times and best utilize company production capacity.</li><li>Initiate work orders and ensure that all products are produced to the specified specifications and ensure conformance to the schedule.</li><li>To manage the shift and all direct staff to ensure the smooth running of the production process, complying with the company’s Health and Safety procedures.</li></ul> Responsibilities:&nbsp; <ul><li>Plan, schedule, and manage production workflows to meet delivery timelines while ensuring all products conform to required specifications.</li><li>Supervise and lead shift teams, ensuring smooth production operations and strict adherence to all Health &amp; Safety guidelines within the plant.</li><li>Oversee material and production planning, including initiating work orders, maintaining inventory accuracy, and participating in stockroom and physical inventory processes.</li><li>Drive operational excellence through continuous improvement, supporting initiatives such as our client /Kaizen to enhance efficiency, quality, and overall production performance.</li></ul> Requirements: Leadership Experience:&nbsp; <ul><li>Deep understanding and professional experience of people management.</li><li>Excellent communication and convincing skills</li><li>Self-driven and detail-oriented</li><li>Desire to solve problems with analytical thinking</li><li>Good at people management and execution skills</li><li>Strong organizational skills and a team player</li></ul> Project Experience:&nbsp; <ul><li>Expert in material and production planning.</li><li>Knowledge of SAP</li><li>Quality and Environmental Management System knowledge</li><li>Excellent people management skills to develop and motivate direct reporting staff and to ensure that Health and Safety rules and regulations are adhered to during the shift in line with the companys Health and Safety policy.</li><li>Assist in maintaining stock rooms and inventory accuracy and participate in physical inventory counts.</li><li>Demonstrate customer customer-centric approach and adherence to customer expectations to promote a positive company image.</li><li>Play an active role in the our client plan/Kaizen initiative to achieve plans for future growth within the company.&nbsp;&nbsp;</li></ul> Education: <ul><li>Bachelor of Science or above degree and an engineering background.</li><li>Preferably Mechanical, Electrical/Electronics, and Industrial Engineer.&nbsp;</li></ul> Other Requirements:&nbsp; <ul><li>3-5+ years’ experience as a practitioner as an Engineer.</li><li>Knowledge in Mechanical, Electrical, and Pneumatic drawings.</li><li>Solid understanding of health and safety regulations and practices.</li><li>Strong decision-making and problem-solving skills.</li><li>Excellent communication and interpersonal skills.</li><li>Computer literate with capability in email, MS Office, and related communication tools.</li><li>Knowledge in various machines from Stamping, Molding, Plating, and Assembly.&nbsp;</li></ul>

Skills

Industry

Location

Jobtitle

168 piping valves engineer Jobs found

EMEA Field Service Power Distribution Lead Engineer- Switchgear

Software Engineer - React

Sr. Software Engineer - Ag & Trading .Net

Packaging Technician

Senior Product Development Engineer

Staff Manufacturing Engineer – Bulk Cable

Product Engineer II

Sr. Manufacturing & Process Development Engineer

Data Engineer, Senior

Supervisor Assembly III

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

168 piping valves engineer Jobs found

EMEA Field Service Power Distribution Lead Engineer- Switchgear

Software Engineer - React

Sr. Software Engineer - Ag & Trading .Net

Packaging Technician

Senior Product Development Engineer

Staff Manufacturing Engineer – Bulk Cable

Product Engineer II

Sr. Manufacturing & Process Development Engineer

Data Engineer, Senior

Supervisor Assembly III

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.