Plant Corrosion Engineer

Process Engineer

Corrosion Engineer

Piping & Valves Engineer

Control System DCS (HGP)

Risk Base Inspection Facilitator

Chemical Engineer

Instrument Engineer

Overview: We are seeking a Corrosion Engineer to join the Northern Area Corrosion &amp; Inspection Division (NAC&amp;ID), under Northern Area Technical Support Department (NATSD). NATSD provides engineering support for the Northern Area Oil Operations with specialized engineering and technical knowledge in the areas of various disciplines to maximize profitability and meet the highest standards of safety and environment. Responsibilities: <ul><li>Develop Corrosion Management Plans (CMP) for the operating facilities as perstandards</li><li>Develop, implement and maintain corrosion mitigation plans for the operating facilities through chemical treatment (corrosion inhibitors, scale inhibitors, biocides, oxygen scavenger etc.), coating and material selection</li><li>Conduct assessments for onshore and offshore facilities.</li><li>This includes scheduling the implementation of initial/evergreening assessments, facilitating the data collection and entry into the software etc.</li><li>Develop and implement corrosion monitoring plans for the operating facilities using corrosion coupons, corrosion probes</li><li>Carry out failure investigation and provide recommendations to prevent failures and improve integrity of the plants and pipelines Develop, maintain and optimize On-Stream Inspection (OSI) programs for the facilities</li><li>Support facility improvements by reviewing design packages for maintain potential and new projects and providing comments related to corrosion monitoring, corrosion mitigation plans including but not limited to material selection, installation of Corrosion Monitoring systems (CMS), Chemical Treatments, Corrosion Risk Management, OSI etc.</li><li>Work with inspection during plant shutdown and during turnaround and inspection (T&amp;I) for evaluation of internal and external corrosion issues and coating assessments</li></ul> Requirements: <ul><li>As the successful candidate you Will hold a Bachelor’s degree in materials, metallurgical or chemical engineering (or other relevant discipline) with a focus on corrosion.</li><li>Shall have NACE senior Corrosion Technologist certification. NACE specialist certifications would be considered advantageous</li><li>Should have a Minimum of 15 years’ experience in the oil &amp; gas industry.&nbsp;</li><li>At least 5 years’ experience in Risk-Based Inspection analysis methodology including qualitative and quantitative/semi-quantitative assessment skills of the probability of failure (PoF) and the consequence of failure (CoF).</li><li>You should have API-580 certification.</li><li>Must have a Knowledge of internal and external corrosion mechanisms common to upstream oil and gas industry and corresponding corrosion management</li><li>Must have a Knowledge of corrosion mitigation (coating, cathodic protection, chemical inhibition and material selection) &amp; corrosion monitoring techniques (coupons, probes, on-stream inspection, in-line inspection, etc.)</li><li>Are familiar with government regulations and industry codes and standards (NACE, API, ASME, etc.), specifically regarding equipment integrity</li><li>Have a working experience of reviewing the project proposal, projects design, and detail design and construction stages</li></ul>

Responsibilities: <ul><li>Provide day-to-day technical support to the Operation and Maintenance areas, to troubleshoot and fix process equipment.</li><li>Develop the engineering designs packages for the new installation and upgrade projects.</li><li>Review project proposals and detailed design packages for new facilities.</li><li>Participate in the testing and commissioning of the new facilities, and turnaround and inspection (T&amp;I).</li><li>Update and maintain engineering documentation and drawings.</li><li>Analyze system performance and find solutions for energy savings.</li><li>Ensure quality, cost-effective, and timely solutions to any upgrade.</li><li>Ensure full HSE Compliance.</li><li>Report and analyze key performance indices.</li><li>Make recommendations for technical/economic optimization of existing facilities.</li><li>Lead feasibility/profitability studies for new facilities.</li><li>Contribute to the business unit strategy.</li><li>Assist in the training, development, and mentoring of younger staff.</li><li>Provide analysis, evaluation, and interpretation in support of projects, processes, and financing related to capital investment decisions.</li></ul> Requirements: <ul><li>Bachelors Degree in Chemical Engineering, MS is preferred. A Professional Engineer (P.E.) or Chartered Engineer (C.Eng.) license or registration will be desirable but is not essential.</li><li>At least 15 years of experience in the industrial operation facility, a gas plant facility is preferred.</li><li>Good knowledge of the modular skids mounted process unit.</li><li>Able to demonstrate a detailed knowledge of industry standards and procedures, such as API and ASMI codes, required to support the review of company standards, project reviews, and implementation of plant modifications to process systems.</li><li>Experience with creating/modifying PFDs, and P&amp;IDs, toubleshooting process equipment and system failures, including pumps, compressors, pipe line/piping, and dehydration systems.</li><li>Knowledge of HYSIS and other process simulation software is required.</li><li>Knowledge in creating schematics and piping diagrams.</li><li>Ability to conduct failure analysis, and provide recommendations for failed process systems, and sequence of event reporting.</li><li>Knowledge with process equipment and systems field installation, commissioning, and testing, as well as experience in specifying piping and equipment layout.</li><li>Experience in dealing with corrosion related issues, with thorough understanding of plant operations, process technologies, supply and product logistics, business drivers, cost drivers, and feedstock sensitivities.</li><li>Ability to work with multidisciplinary teams producing reports, studies, and presentations that are pivotal in shaping management’s decisions.</li><li>Ability to communicate effectively with management at all levels within the organization, and be capable of spotting and reconciling conflicting views and interests among different parts of the organization.</li><li>Strong written and oral communication skills, and be ability to communicate complex technical, economic, and commercial concepts</li></ul>

Responsibilities: <ul><li>Provide expert advice and assistance to the UR, outside vendors, manufacturers, and design firms on corrosion engineering matters.</li><li>Originate and carry out engineering studies to determine potential problems and remedies to existing problems, resolve complex technical problems.</li><li>Generate and monitor corrosion monitoring programs and corrosion monitoring devices (coupons/probes).</li><li>Review and monitor pipeline corrosion management (scraping/ILI).</li><li>Inspect installations in factories and in the field and participate on the testing &amp; commissioning of new facilities and Turnaround and Inspection (T&amp;I).</li><li>Investigate and analyze failures in operational facilities and provide remedial actions.</li><li>Review and monitor cathodic protection (CP) performance.</li><li>Develop and maintain the UR engineering standards and design best practices.</li><li>Evaluate and introduce best practices and new technologies from all over the world to help the UR to achieve best in class positions.</li><li>Work on or with task forces assigned to investigate incidents or solve specific problems.&nbsp;</li><li>Perform cost analyses and value engineering studies as appropriate.&nbsp;</li><li>Undertake special assignments requiring extensive technical experience and discretion when dealing with outside organizations.</li><li>Conduct seminars in the resolution of technical problems with personnel in other engineering organizations.&nbsp;</li><li>Write papers for peer-reviewed journals on engineering studies and projects the candidate has overseen.</li></ul> Requirements:&nbsp; <ul><li>A bachelor’s degree in engineering.&nbsp;</li><li>A master’s degree or a Ph.D. in corrosion engineering is highly desirable as well as a Professional Engineer (P.E.) license, NACE and API certifications.</li><li>Minimum 15 years of professional experience in the field of corrosion engineering, including experience as an engineer in charge of technical work in corrosion engineering.&nbsp;</li><li>Experience working with unconventional resources would be an advantage.</li><li>You will have achieved industry recognition through activities in professional societies and industrial organizations, such as ASME, ASCE, ASTM, API, NACE, SEI, and others.</li><li>As the successful candidate you will be expected to work in remote areas depending on the project you are assigned to.</li></ul>

Responsibilities: <ul><li>Provide day-to-day technical support to the Operation and Maintenance to troubleshoot and fix process equipment</li><li>Develop the engineering designs packages for the new installation and upgrade projects</li><li>Review Project Proposals and Detailed Designs packages for new facilities</li><li>Participate on the testing &amp; commissioning of the new facilities and Turnaround and Inspection (T&amp;I)</li><li>Update and maintain engineering documentation and drawings</li><li>Analyze system performance and find solution for Energy saving</li><li>Ensure quality, cost effective and timely solutions to any upgrade</li><li>Test and pilot new technologies</li><li>Ensure full HSE Compliance</li><li>Report and analyze key performance indices</li><li>Make recommendations for technical/economic optimization of existing facilities</li><li>Lead feasibility/profitability studies for new facilities</li><li>Contribute to Business Unit strategy</li><li>Assist in the training, development and mentoring of younger staff.</li><li>Provide analysis, evaluation and interpretation in support of projects, processes, and financing related to capital investment decisions.</li><li>Maintain and expands on contacts within the industry.</li><li>Regularly interact with other professionals in various company organizations involved in capital planning and economic analysis.</li></ul> Requirements: <ul><li>As the successful candidate you a Bachelors Degree in Chemical Engineering, MS is preferred. A Professional Engineer (P.E.) or Chartered Engineer (C.Eng.) license or registration will be desirable but is not essential.</li><li>You will have at least 15 years of working experience including 10 years of experience in the industrial operation facility, Shale gas facility is preferred.&nbsp;</li><li>Also, has a good knowledge of the Modular skids mounted process unit.</li><li>Detailed knowledge of industry standards and procedures such as API and ASMI codes is required to support the review of company standards, project reviews, and implementation of plant modifications to process systems.</li><li>Experience with creating/modifying PFDs, and P&amp;IDs</li><li>Experience with troubleshooting process equipment and systems failures, including pumps, compressors, pipe line/piping, and dehydration systems.</li><li>Knowledge of HYSIS and other process simulation software</li><li>Experience in creating schematics and piping diagrams</li><li>Conduct failure analysis and provide recommendations for failed process system, sequence of event reporting</li><li>Experience with process equipment and systems field Installation, Commissioning and testing</li><li>Experience in specifying piping and equipment layout</li><li>Has good experience in dealing with corrosion related issues</li><li>Capable of communicating with multidiscipline engineers to complete projects</li><li>Proven ability to communicate effectively with management at all levels within the organization. Capable of spotting and reconciling conflicting views and interests among different parts of the organization</li><li>Strong written and oral communication skills. Able to communicate what are frequently complex technical, economic and commercial concepts in a clear and succinct manner to individuals and groups from diverse professional backgrounds.</li><li>Hands-on person who will immediately command the professional respect of others who possess long-time practical experience of working in or serving the industry.&nbsp;</li><li>Person whom others, at all levels, will seek out for advice and counsel.</li><li>Able to work effectively with the minimum of supervision on relatively unstructured tasks.</li></ul>

Responsibilities: As the successful candidate you will be required to perform the following: <ul><li>Perform field troubleshooting on a daily basis or as requested.</li><li>Participate on major T&amp;Is and emergency plant shutdowns.</li><li>Provide support to maintenance organizations e.g. Machine Shop or Welding Shop by developing repair procedures and following up with on-going repairs.&nbsp;Provide proposals for repairs or avail any ideas that can come from the execution team from a technical stand point&nbsp;</li><li>Participate in facilities audit activities.</li><li>Provide engineering support to repair hydrocarbon leaks, review and approve the bolted clamp calculations and design made by the specialized leak sealing contractor companies to maintenance prior to field installation.</li><li>Review detailed drawings and material specification from Layout Group for piping modifications as requested.</li><li>Participate in HAZOP Studies review.</li><li>Perform piping mechanical calculations like minimum wall thickness for internal and external pressure, branch reinforcement calculations, MAWP calculations as per ASME B31.3, hydrotest pressure, rating and/or de-rating of piping circuits by following API 570, fitness for service to evaluate flaws or damage and determine if the piece of pipe is suitable for continuous operation by using API 579, perform pipe stress analysis using Caesar II, perform flange calculations as per ASME VIII Div 1 App 2 using PVElite, perform nozzle calculations using WRC-107 and WRC-297 modeling the analysis in Caesar II or PVElite.</li><li>Mechanical calculations and technical assessment of all the miscellaneous mechanical items like for example: Expansion Joints, steam Traps, special valves, strainers, quill injector vortex shedding calculations</li><li>Perform Hot Tap calculations by using standard SAEP-311 and API 2201.</li><li>Troubleshoot and assess valve selection, perform mechanical calculations for check valves, perform torque calculations for valve stems, etc.</li><li>Calculate and select spring hangers, provide maintenance with repair procedures.</li><li>Select gaskets type and materials, provide correct specification and applicability to critical services.</li><li>Perform mechanical assessment for firefighting equipment and systems, perform basic hydraulic calculations for deluge systems, sprinklers, fire monitors, get the concurrence from chief fire prevention engineer is required.</li><li>Perform basic structural calculations for temporary supports and any other structure minor modification as requested.</li><li>Evaluate and recommend metallurgical changes along with Corrosion and Inspection specialist</li><li>Along with the repair procedures, develop basic welding procedures for repair of mechanical components and have the concurrence from CSD welding specialist.</li><li>Develop EWRs by preparing detailed design packages including scope of work, assembly/erection procedures, welding procedures, NDT requirements, material list and sketches/drawings.</li><li>Review and approve from the technical standpoint all quotations received as requested by maintenance when deemed necessary (Example: valves, pipe and fittings of special materials, etc.</li></ul> Requirements: <ul><li>You must hold a Bachelor Degree in Mechanical Engineering.</li><li>You should have a minimum of 15 years’ experience within the refinery and/or NGLF industry specifically in asset integrity of piping and valves, with at least 10 years field experience working on plants major turnaround and field troubleshooting.</li><li>You must have a thorough knowledge of best engineering practices, solid industry codes and standards background (ASME, API, NACE, ASTM, ISO) and use of engineering software’s.</li></ul>

Responsibilities: <ul><li>Participate in new facilities design review and ensure compliance with SA engineering standards from corrosion and materials selection stand point.</li><li>Review facilities mothballing and preservation procedures and ensure SAEP-43 provisions are met.</li><li>Develop corrosion control document in line with SAEP-88</li><li>Conduct annual review of dead-legs within EWPD in accordance with 00-SAIP-01.</li><li>Work diligently to enhance EWPD Corrosion Control Compliance Index score by identifying Areas for Improvements (AFIs) and developing short- and long-term plans to address the AFIs.</li><li>Plan annual on-stream scraping</li><li>Track on-stream scraping progress and support operation in evaluating the impact of deferred on-stream scraping runs</li><li>Review on-stream scraping report filled by operation post scraping.</li><li>Evaluate effectiveness of on-stream scraping for each pipeline.</li><li>Coordinate sampling activities part of the on-stream scraping process.</li><li>Evaluate sampling results and issue recommendations.</li><li>Communicate with upstream facilities for any out of specs streams.</li><li>Review internal corrosion, evaluate different chemical treatment alternatives, select the proper chemical product and specify the dosage for each pipeline.</li></ul> Requirements: <ul><li>As the successful candidate you will hold a Bachelor’s degree in Chemical Engineering or equivalent from a recognized and approved program, Certified API-571 or NACE CP-4 and Certified NACE corrosion Specialist</li><li>You will have 8 years of experience in oil and gas industry, including at least one year in corrosion related fields.</li></ul>

Responsibilities: <ul><li>We are looking for DCS Engineer to join Shedgum Gas Plant Department You will be responsible for providing technical support to operating facilities, projects, technology deployment, and talent development of new DCS Engineer</li><li>ShGP was brought on stream in 1981. The plant current processing capacity is 2.5 billion standard cubic feet per day (BSCFD) of associated and non-associated gas. The plant products are NGL, Ethane, Sales Gas and Liquid Sulfur.</li><li>We are seeking for control system and instrumentation to work within ShGP control system and instrumentation group.&nbsp;</li><li>The engineer will work with engineering disciplines to enhance and resolve process control and instrumentation activities.</li><li>Additionally, the engineer is expected to participate in the organization initiatives including but not limited to safety program, innovation programs, operation excellence, knowledge sharing, self-development and others programs as required.</li><li>The engineer should have a full knowledge involved with advanced Gas Processing control and adequate technical skills to provide engineering analysis, design and control of assigned projects.&nbsp;</li><li>The Engineer shall check the system performance to ensure it is running up to its design and implement any modification or system enhancement.</li></ul> Requirements:&nbsp; <ul><li>As a successful candidate, he should have a BS in related engineering discipline to control system and instrumentation with (10) years of experience.&nbsp;</li><li>He should have a recent experience with DCS and ESD (Foxboro/ Triconex), Turbine Control System (TCS), Compressor Control System (Allen Bradley) and control system security.</li><li>He should have excellent experience and knowledge in designing and updating/upgrading control system and strong knowledge of relevant codes and standards</li></ul>

Role Description: <ul><li>We are seeking a skilled and experienced Risk-Based Inspection (RBI) Facilitator Engineer to join our Ras Tanura Refinery Engineering Department, Corrosion Management Unit.</li><li>Your primary role will be to lead and facilitate Risk-Based Inspection processes for various assets, equipment, and facilities.</li><li>You will collaborate with cross-functional teams to assess risks, develop inspection plans, and optimize maintenance strategies to ensure the integrity and reliability of assets while minimizing operational risks.</li></ul> Responsibilities: As the successful candidate you will be required to perform the following: <ul><li>Lead and facilitate Risk-Based Inspection (RBI) assessments for critical assets and equipment.</li><li>Develop and implement RBI methodologies, processes, and procedures to identify, assess, and manage risks effectively.</li><li>Collaborate with engineering, operations, and maintenance teams to prioritize inspection activities based on risk assessment results.</li><li>Utilize risk assessment tools and software to analyze data and generate reports to support decision-making processes.</li><li>Review inspection reports, findings, and recommendations to ensure compliance with regulatory requirements and industry standards.</li><li>Work closely with reliability engineers to optimize maintenance strategies and improve asset reliability.</li><li>Provide technical guidance and support to field inspection teams during on-site inspections and evaluations.</li><li>Conduct training sessions and workshops to educate personnel on RBI concepts, methodologies, and best practices.</li><li>Monitor and track key performance indicators related to asset integrity, reliability, and risk mitigation.</li><li>Stay current with industry trends, best practices, and advancements in RBI technologies to continuously improve RBI processes.</li></ul> Requirements: <ul><li>You must hold a Bachelors degree in Mechanical Engineering, Chemical Engineering, or a related field.</li><li>Advanced degree or certification in Asset Integrity Management is a plus.</li><li>You should have a minimum of 10 years’ experience.</li><li>A Proven experience in Risk-Based Inspection (RBI) facilitation, implementation, and management within the oil and gas, petrochemical, or related industries.</li><li>In-depth knowledge of RBI methodologies, risk assessment techniques, and inspection planning strategies.</li><li>Strong analytical skills with the ability to interpret complex data and make data-driven decisions.</li><li>Proficiency in using RBI software tools and platforms for risk analysis and reporting.</li><li>Familiarity with relevant industry standards and regulations governing asset integrity and inspection practices.</li><li>Willingness to travel to various project sites and facilities as needed.</li></ul>

Responsibilities: <ul><li>Perform process troubleshooting and address chronic operational problems</li><li>Conduct optimization of processes through identifying improvement opportunities and implementing technically robust and cost-effective solutions</li><li>Provide technical guidance and field support for process related issues in the plant</li><li>Lead investigations and HAZOP’s</li><li>Carry out detailed design reviews of plant modifications and support the implementation of projects</li><li>Develop and execute equipment/process assessment studies as well as feasibility studies for improvements to increase plant safety, reliability or efficiency</li><li>Mentor and develop young engineers.</li><li>Maintain the highest standards of integrity, engineering ethics and professional conduct.</li></ul> Requirements: <ul><li>Hold at least a BS degree in chemical engineering from a recognized university.</li><li>Minimum of 10 years’ industry experience preferably at operating facilities</li><li>Be able to perform process simulations and carry out equipment sizing and performance calculations (e.g. Relief valve, control valves, heat exchanger performance</li><li>Have significant experience in design development, technical design reviews and project execution (pre-commissioning, commissioning &amp; startup)</li><li>Have experience in process safety management systems &amp; tools such as HAZOPs and MOC’s</li><li>Possess a thorough knowledge of industry standards (e.g. API) as well as best practices (RAGAGEP)</li><li>Professional Engineering, Chartered Engineer or equivalent certification is desirable.</li><li>Be capable of project and design assignments beyond the ability of the basic professional Engineer III or is qualified to an outstanding degree in one or another "Specialist#.</li><li>Have a thorough knowledge of English is required to perform analyses and studies in depth, make professional presentations and keep up with technical advancements</li><li>Must have a thorough knowledge of engineering practices and economic principles, calculation methods, design details, US and Codes, Standards and Specifications.</li></ul>

Responsibilities: You will be required to perform the following: <ul><li>Conduct performance and compliance assessments for the facilities control systems and instrumentation and generate the related reports.</li><li>Develop engineering design scopes and packages.</li><li>Perform logic changes on Honeywell DCS Experion PKS and Honeywell ESD Safety Manager.</li><li>Troubleshoot and investigate system upsets and/or malfunctions and provide recommendations.</li><li>Conduct engineering job evaluation for plant modifications proposals.</li><li>Assist and provide technical consultation to Maintenance and Operation teams.</li><li>Provide support to Plant Operations Engineers.</li><li>Conduct and Review major studies and incidents investigations.</li><li>Maintain engineering drawings and Mark-ups as P&amp;ID’s, ILD’s and ISS’s.</li><li>Participate on studies and company studies including HAZOP and SIL studies, innovation programs, operational excellence, knowledge sharing, among others.&nbsp;</li><li>Participate on control systems (DCS, ESD, CCS, VMS, etc) FAT and SAT tests, commissioning and PAT as required.</li><li>Develop and mentor young engineers.&nbsp;</li></ul> Requirements: <ul><li>As the successful candidate you should hold a Bachelor degree or preferably master’s degree in related engineering discipline to control system (i.e Electrical Engineer, Electronic Engineering, System Engineer or equivalent) from a recognized and approved program.</li></ul>

Skills

Industry

Location

Jobtitle

267 plant corrosion engineer Jobs found

Plant Corrosion Engineer

Process Engineer

Corrosion Engineer

Process Engineer

Piping & Valves Engineer

Corrosion Engineer

Control System DCS (HGP)

Risk Base Inspection Facilitator

Chemical Engineer

Instrument Engineer

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

267 plant corrosion engineer Jobs found

Plant Corrosion Engineer

Process Engineer

Corrosion Engineer

Process Engineer

Piping & Valves Engineer

Corrosion Engineer

Control System DCS (HGP)

Risk Base Inspection Facilitator

Chemical Engineer

Instrument Engineer

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.