Process Engineer

Process Engineer - Crude Distillation

Process Engineer - Distillation

Control System DCS (HGP)

Compressor Engineer

Chemical Engineer

Engineer, Capacity Planning

Instrument Engineer

Responsibilities: <ul><li>Provide day-to-day technical support to the Operation and Maintenance areas, to troubleshoot and fix process equipment.</li><li>Develop the engineering designs packages for the new installation and upgrade projects.</li><li>Review project proposals and detailed design packages for new facilities.</li><li>Participate in the testing and commissioning of the new facilities, and turnaround and inspection (T&amp;I).</li><li>Update and maintain engineering documentation and drawings.</li><li>Analyze system performance and find solutions for energy savings.</li><li>Ensure quality, cost-effective, and timely solutions to any upgrade.</li><li>Ensure full HSE Compliance.</li><li>Report and analyze key performance indices.</li><li>Make recommendations for technical/economic optimization of existing facilities.</li><li>Lead feasibility/profitability studies for new facilities.</li><li>Contribute to the business unit strategy.</li><li>Assist in the training, development, and mentoring of younger staff.</li><li>Provide analysis, evaluation, and interpretation in support of projects, processes, and financing related to capital investment decisions.</li></ul> Requirements: <ul><li>Bachelors Degree in Chemical Engineering, MS is preferred. A Professional Engineer (P.E.) or Chartered Engineer (C.Eng.) license or registration will be desirable but is not essential.</li><li>At least 15 years of experience in the industrial operation facility, a gas plant facility is preferred.</li><li>Good knowledge of the modular skids mounted process unit.</li><li>Able to demonstrate a detailed knowledge of industry standards and procedures, such as API and ASMI codes, required to support the review of company standards, project reviews, and implementation of plant modifications to process systems.</li><li>Experience with creating/modifying PFDs, and P&amp;IDs, toubleshooting process equipment and system failures, including pumps, compressors, pipe line/piping, and dehydration systems.</li><li>Knowledge of HYSIS and other process simulation software is required.</li><li>Knowledge in creating schematics and piping diagrams.</li><li>Ability to conduct failure analysis, and provide recommendations for failed process systems, and sequence of event reporting.</li><li>Knowledge with process equipment and systems field installation, commissioning, and testing, as well as experience in specifying piping and equipment layout.</li><li>Experience in dealing with corrosion related issues, with thorough understanding of plant operations, process technologies, supply and product logistics, business drivers, cost drivers, and feedstock sensitivities.</li><li>Ability to work with multidisciplinary teams producing reports, studies, and presentations that are pivotal in shaping management’s decisions.</li><li>Ability to communicate effectively with management at all levels within the organization, and be capable of spotting and reconciling conflicting views and interests among different parts of the organization.</li><li>Strong written and oral communication skills, and be ability to communicate complex technical, economic, and commercial concepts</li></ul>

Responsibilities: <ul><li>Operational Excellence and Process Safety&nbsp;</li><li>Participate in the PHA and MOC process by providing technical inputs and evaluating recommendations to ensure operational feasibility and compliance to safety standards.</li><li>Investigate incidents, provide and evaluate recommendations from PHA to ensure timely implementation of the process. </li><li>Process Optimization and Plant Performance Evaluations</li><li>Implement Advance Process Control System through proper awareness and specialization to optimize the process.</li><li>Monitor the plant parameters daily and evaluate the plant performance by providing recommendations in order to improve technical processes.</li><li>Manage material and energy balance, compare with design and assist the plant management in facilitating processes to run the plant efficiently and economically.</li><li>Provide engineering assistance on technical aspects to the Operations Group, conduct evaluation and selection of equipment based on technical requirements to meet engineering standards.</li><li>Policies, Systems, Processes and Procedures&nbsp;</li><li>Contribute to the identification of opportunities for the continuous improvement of technical department’s systems, policies, processes and practices taking into account ‘international leading practices’ in order to improve productivity and operational efficiency.</li><li>Provide critical input to support the development of Engineering systems, policies, processes, and procedures in order to meet business requirements.</li><li>Ensure team members comply with all Engineering policies, processes, standard operating procedures and instructions so that work is carried out in a controlled and consistent manner.</li></ul> Qatarization: <ul><li>Contribute to the development of Qatari employees.</li><li>This accountability is applicable to expatriate. employees only. Quality, Health, Security, Safety and Environment</li><li>Ensure compliance with regulatory requirements and relevant quality, health, safety, security and environmental procedures and controls across the Section to guarantee employee safety and delivery of high-quality products/services</li></ul> Requirements: <ul><li>Required (Qualification1 / Discipline): Bachelor’s degree in chemical engineering.</li><li>Preferred (Qualification1 / Discipline): Master Degree in Chemical Engineering. Experience</li><li>Required (Years2 / Job Level3 / Industry): Total of 7-10 years of experience in Petrochemicals Industry in Process Engineering.</li><li>Preferred (Years2 / Job Level3 / Industry): Experience in Oil &amp; Gas Industry.</li></ul>

Responsibilities: <ul><li>As the successful candidate you will be required to perform the following:</li><li>Perform in-depth plant monitoring and optimize performance of CDU/VDU units whilst overseeing the unit’s operation and economics losses.</li><li>Issue detailed reports to recommend changes supported by simulation models’ result to optimize unit operation.</li><li>Lead unit operations troubleshooting and investigating off-spec. products and plant trips/ upsets and manage the required deliverables.</li><li>Support Operations during turnaround and unplanned Shutdowns / Startups by understanding the unit operating conditions and transient effects to recommend operations improvements</li><li>Perform specific tasks such as, but not limited to catalyst forecast/ evaluation, test runs, de-bottlenecking studies, due-diligence assessment, enhancement studies, HAZOP studies.</li><li>Lead process safety management overseeing HAZOP, PSR, SIL, PSSR, QRA, and Alarm Rationalization. Lead HAZOP/Process Safety Reviews of plant operations as well as new modifications.</li><li>Manage long and short-term projects by proposing major projects to improve safety, reliability and profitability.</li><li>Prepare design requests, budget justifications and detailed implementation plans for economically justifiable projects.</li><li>As well as develop detailed engineering design packages for in-house process-oriented projects and follow up on implementation.</li><li>Review in-detail and revise standard work procedures like new operating procedures, instructions, RIMs, alarm and ESD check list, MOC, HAZOP, JSA, Relive valves, plant drawings.</li><li>Ensure environmental and safety awareness effectiveness with work closely with the facility Safety and Environment management to improve safety and achieve highest environmental standards.</li><li>Liaise with vendors and technology licensors for process enhancements and changes as well as with Engineering Services Department for any technology assessment and piloting support.</li></ul> Requirements: <ul><li>You must hold a Bachelor degree in Chemical Engineering from a recognized and approved program. An advanced degree is preferred.</li><li>You should have a minimum of 15 years total refinery process unit experience (process engineering and operations) with at least 10 years’ experience in handling Crude distillation units.</li><li>Exposure to different licensor technologies for Hydrocarbon treating is a plus.</li><li>Certified PHA/HAZOP leader.</li><li>Familiarity and understanding of the best practices, design principles, international engineering standards and specifications relevant to operation of the concerned process units.</li></ul>

Responsibilities: <ul><li>We are seeking a Downstream Process Engineer with experience in Crude Distillation and treating processes (Atmospheric distillation, Vacuum distillation, MEROX, etc …) to join our Ras Tanura Refinery Engineering Department under the Downstream Global Manufacturing to support and oversee the performances of facility assets.</li><li>Your primary role will be to provide exceptional process engineering support, monitoring plant performance, capture optimization opportunities and value-creation programs for the operation of crude Distillation and Treating Units in order to operate safely, reliably, and economically as well as achieve target goals while realizing company strategic imperatives.</li><li>As the successful candidate you will be required to perform the following:</li><li>&nbsp;Perform in-depth plant monitoring and optimize performance of CDU/VDU units by overseen unit’s operation and economics losses. </li><li>Ensure issuing detailed reports to recommend changes supported by simulation models’ result to optimize unit operation.</li><li>Lead unit operations troubleshooting and investigating off-spec. products and plant trips/ upsets and manage the required deliverables. Support Operations during turnaround and unplanned Shutdowns / Startups by understanding the unit operating conditions and transient effects to recommend operations improvements</li><li>Perform specific tasks such as, but not limited to catalyst forecast/ evaluation, test runs, de-bottlenecking studies, due-diligence assessment, enhancement studies, HAZOP studies.</li><li>You will be assigned the Lead Role in process safety management overseeing HAZOP, PSR, SIL, PSSR, QRA, and Alarm Rationalization. Lead HAZOP/Process Safety Reviews of plant operations as well as new modifications.</li><li>Manage long and short-term projects by proposing major projects to improve safety, reliability and profitability. Prepare design request, budget justifications and detailed implementation plans for economically justifiable projects. Also, develop detailed engineering design packages for in-house process-oriented projects and follow up on implementation.</li><li>Review in-detail and revise standard work procedures like new operating procedures, instructions, RIMs, alarm and ESD check list, MOC, HAZOP, JSA, Relive valves, plant drawings.</li><li>Ensure environmental and safety awareness effectiveness with work closely with the facility Safety and Environment management to improve safety and achieve highest environmental standards.</li><li>Liaise with vendors and technology licensors for process enhancements and changes as well as with Engineering Services Department for any technology assessment and piloting support.</li><li>Train younger or less- experienced engineers by providing necessary guidance, assessing strengths and skills in need of improvement. Serve as technical mentor/ advisor to enhance the technical knowledge of the engineers through practical field discussions, demonstrations and/or simulations using available engineering aids.</li></ul> Requirements: <ul><li>You must hold a Bachelor’s degree in Chemical Engineering from a recognized and approved program.</li><li>An advanced degree is preferred.</li><li>You should have a minimum 15 years of total refinery process unit experience (process engineering and operations) with at least 10 years’ experience in handling Crude distillation units.</li><li>Exposure to different licensor technologies for Hydrocarbon treating is a plus as well as familiarity with Honeywell UOP or Axens licensed units.</li><li>You must be Certified PHA/HAZOP leader.</li><li>Familiarity and understanding of the best practices, design principles, international engineering standards and specifications relevant to operation of the concerned process units are preferred.</li></ul>

Responsibilities: As the successful candidate you will be required to perform the following: <ul><li>Perform in-depth plant monitoring and optimize performance of CDU/VDU units by overseen unit’s operation and economics losses.</li><li>Ensure issuing detailed reports to recommend changes supported by simulation models’ result to optimize unit operation.</li><li>Lead unit operations troubleshooting and investigating off-spec. products and plant trips/ upsets and manage the required deliverables.</li><li>Support Operations during turnaround and unplanned Shutdowns / Startups by understanding the unit operating conditions and transient effects to recommend operations improvements.</li><li>Perform specific tasks such as, but not limited to catalyst forecast/ evaluation, test runs, de-bottlenecking studies, due-diligence assessment, enhancement studies, HAZOP studies.</li><li>You will be assigned the Lead Role in process safety management overseeing HAZOP, PSR, SIL, PSSR, QRA, and Alarm Rationalization.</li><li>Lead HAZOP/Process Safety Reviews of plant operations as well as new modifications.</li><li>Manage long and short-term projects by proposing major projects to improve safety, reliability and profitability.</li><li>Prepare design request, budget justifications and detailed implementation plans for economically justifiable projects.</li><li>Also, develop detailed engineering design packages for in-house process-oriented projects and follow up on implementation.</li><li>Review in-detail and revise standard work procedures like new operating procedures, instructions, RIMs, alarm and ESD check list, MOC, HAZOP, JSA, Relive valves, plant drawings.</li><li>Ensure environmental and safety awareness effectiveness with work closely with the facility Safety and Environment management to improve safety and achieve highest environmental standards.</li><li>Liaise with vendors and technology licensors for process enhancements and changes as well as with Engineering Services Department for any technology assessment and piloting support.</li><li>Train younger or less- experienced engineers by providing necessary guidance, assessing strengths and skills in need of improvement.</li><li>Serve as technical mentor/ advisor to enhance the technical knowledge of the engineers through practical field discussions, demonstrations and/or simulations using available engineering aids.</li></ul> Requirements: <ul><li>You must hold a Bachelor’s degree in Chemical Engineering from a recognized and approved program.</li><li>An advanced degree is preferred.</li><li>You should have a minimum 15 years of total refinery process unit experience (process engineering and operations) with at least 10 years’ experience in handling Crude distillation units.</li><li>Exposure to different licensor technologies for Hydrocarbon treating is a plus as well as familiarity with Honeywell UOP or Axens licensed units.</li><li>You must be Certified PHA/HAZOP leader.</li><li>Familiarity and understanding of the best practices, design principles, international engineering standards and specifications relevant to operation of the concerned process units are preferred.</li></ul>

Responsibilities: <ul><li>We are looking for DCS Engineer to join Shedgum Gas Plant Department You will be responsible for providing technical support to operating facilities, projects, technology deployment, and talent development of new DCS Engineer</li><li>ShGP was brought on stream in 1981. The plant current processing capacity is 2.5 billion standard cubic feet per day (BSCFD) of associated and non-associated gas. The plant products are NGL, Ethane, Sales Gas and Liquid Sulfur.</li><li>We are seeking for control system and instrumentation to work within ShGP control system and instrumentation group.&nbsp;</li><li>The engineer will work with engineering disciplines to enhance and resolve process control and instrumentation activities.</li><li>Additionally, the engineer is expected to participate in the organization initiatives including but not limited to safety program, innovation programs, operation excellence, knowledge sharing, self-development and others programs as required.</li><li>The engineer should have a full knowledge involved with advanced Gas Processing control and adequate technical skills to provide engineering analysis, design and control of assigned projects.&nbsp;</li><li>The Engineer shall check the system performance to ensure it is running up to its design and implement any modification or system enhancement.</li></ul> Requirements:&nbsp; <ul><li>As a successful candidate, he should have a BS in related engineering discipline to control system and instrumentation with (10) years of experience.&nbsp;</li><li>He should have a recent experience with DCS and ESD (Foxboro/ Triconex), Turbine Control System (TCS), Compressor Control System (Allen Bradley) and control system security.</li><li>He should have excellent experience and knowledge in designing and updating/upgrading control system and strong knowledge of relevant codes and standards</li></ul>

Role Description: <ul><li>We are seeking a Compressor Engineer (mechanical engineering background) to work with our Riyadh Refinery Department – Reliability Unit (RU).</li><li>The RU is a centralized engineering unit, its function caters mainly to the technical needs of our refinery operations and supports organizations in compressor monitoring, technical support, troubleshooting and coordinate PdM and PM activities.</li><li>Your primary role will be to provide technical support to our refinery operating plants, projects, technology deployment as well as the talent development of junior Compressor Engineers. You will be expected to conduct special studies and analyses in specialized rotating equipment assets, manage our reliability programs and develop monitoring programs to uplift equipment availability and reliability.</li></ul> Responsibilities: As the successful candidate will be required to perform the following: <ul><li>Provide technical guidance, support, training, and expertise to plant departments.</li><li>Assess plant operation, maintenance and engineering with technical information for the rotating equipment and compressor systems and recommended actions for improvements and system optimization.&nbsp;</li><li>Develop and maintain lifecycle management activities on the rotating equipment and compressor systems.</li><li>Develop and coordinate PdM and PM for rotating equipment and compressor systems activities.</li><li>Ensure manufacturing knowledge is captured and continuous improvement is delivered by benchmarking and improving practices across our operating facilities.</li><li>Provide leadership and support for rotating equipment and compressor systems across our operating facilities.&nbsp;</li><li>Provide engineering expertise and consulting on plant rotating equipment and compressor systems.&nbsp;</li><li>Carryout thorough failure analysis &amp; issue recommendations. Also participate in equipment major failures investigation teams.</li><li>Gather/analyze critical rotating equipment operating parameters from DCS, PI &amp; operator Checklist and be able to recommend corrective actions.</li><li>Prepare detailed technical scope for major equipment overhaul.&nbsp;</li><li>Maintain and execute installation, configuration, and upgrade procedures.&nbsp;</li><li>Lead/give support to plant outages, shutdowns, and chronicle problems.&nbsp;</li><li>System testing and health monitoring, experience in using system logs for troubleshooting.&nbsp;</li><li>Create and implement new strategies to improve productivity for the company, as well as support start-up &amp; maintenance activities.</li><li>Review EDC, new and upgrade projects’ packages and provide comments.&nbsp;</li><li>Establish &amp; maintain an asset’s fault analysis database ensuring all data, drawings, and information are complete and all modifications are updated.&nbsp;</li></ul> Requirements: <ul><li>You must have a Bachelor Degree in Mechanical Engineering.</li><li>You should have a minimum of 10 years’ experience in rotating equipment within a refinery or within the Petrochemical industry.</li><li>You must have a thorough knowledge of best engineering practices, solid industry codes and standards background and use of engineering softwares such as system1, CCC or Vibration CSI.</li></ul>

Responsibilities: <ul><li>Perform process troubleshooting and address chronic operational problems</li><li>Conduct optimization of processes through identifying improvement opportunities and implementing technically robust and cost-effective solutions</li><li>Provide technical guidance and field support for process related issues in the plant</li><li>Lead investigations and HAZOP’s</li><li>Carry out detailed design reviews of plant modifications and support the implementation of projects</li><li>Develop and execute equipment/process assessment studies as well as feasibility studies for improvements to increase plant safety, reliability or efficiency</li><li>Mentor and develop young engineers.</li><li>Maintain the highest standards of integrity, engineering ethics and professional conduct.</li></ul> Requirements: <ul><li>Hold at least a BS degree in chemical engineering from a recognized university.</li><li>Minimum of 10 years’ industry experience preferably at operating facilities</li><li>Be able to perform process simulations and carry out equipment sizing and performance calculations (e.g. Relief valve, control valves, heat exchanger performance</li><li>Have significant experience in design development, technical design reviews and project execution (pre-commissioning, commissioning &amp; startup)</li><li>Have experience in process safety management systems &amp; tools such as HAZOPs and MOC’s</li><li>Possess a thorough knowledge of industry standards (e.g. API) as well as best practices (RAGAGEP)</li><li>Professional Engineering, Chartered Engineer or equivalent certification is desirable.</li><li>Be capable of project and design assignments beyond the ability of the basic professional Engineer III or is qualified to an outstanding degree in one or another "Specialist#.</li><li>Have a thorough knowledge of English is required to perform analyses and studies in depth, make professional presentations and keep up with technical advancements</li><li>Must have a thorough knowledge of engineering practices and economic principles, calculation methods, design details, US and Codes, Standards and Specifications.</li></ul>

Responsibilities: <ul><li>Apply advanced engineering knowledge and experience to develop, implement, and improve methods, time standards, capacity planning, sequence of operation, data analysis, and production line layouts in SAW and BAW filter manufacturing for front-end and back-end operations</li><li>Implement and fan-out standard factory planning models, methods, and tools.</li><li>Ensure the effectiveness of techniques used</li><li>Optimize the use of production facilities, equipment layout, workflow, space utilization, production layout, office layout, plant expansion and relocation activities.</li><li>Global Equipment Strategy (GES) equipment assessment and review.</li><li>Evaluate, recommend, and implement a wide range of complex equipment, tools, and fixtures. Contribute to equipment selection.&nbsp;</li><li>Follow up to ensure that the procurement of new equipment is in line with GES strategy and long-term equipment requirements.</li><li>Contribute to the Global Manufacturing Strategy (GMS) to facilitate the review of technology and site selection strategies and business continuity plans, decisions, and execution.</li><li>Effectively execute capacity ramp-up/downs and production site transfers based on business needs and strategic long-term goals.&nbsp;</li><li>Support capital projects through job sampling, cost justification, and cost/benefit analysis.</li><li>Track capital expenditures across the plant to ensure spendings are within budget.&nbsp;</li><li>Follow up to ensure that project expenditure milestones/targets, and approved budgets are met.</li></ul> Requirements: Minimum Qualifications: <ul><li>Bachelors degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field.</li></ul> Preferred Qualifications: <ul><li>Degree and above in any Engineering disciplines.</li><li>At least 4 years of experience in manufacturing engineering, industrial engineering or operations research in the semiconductor or electronics industry.</li><li>Strong organizational, leadership, communication, and interpersonal skills.</li><li>Ability to work under pressure and have a strong commitment at work.​</li></ul>

Responsibilities: You will be required to perform the following: <ul><li>Conduct performance and compliance assessments for the facilities control systems and instrumentation and generate the related reports.</li><li>Develop engineering design scopes and packages.</li><li>Perform logic changes on Honeywell DCS Experion PKS and Honeywell ESD Safety Manager.</li><li>Troubleshoot and investigate system upsets and/or malfunctions and provide recommendations.</li><li>Conduct engineering job evaluation for plant modifications proposals.</li><li>Assist and provide technical consultation to Maintenance and Operation teams.</li><li>Provide support to Plant Operations Engineers.</li><li>Conduct and Review major studies and incidents investigations.</li><li>Maintain engineering drawings and Mark-ups as P&amp;ID’s, ILD’s and ISS’s.</li><li>Participate on studies and company studies including HAZOP and SIL studies, innovation programs, operational excellence, knowledge sharing, among others.&nbsp;</li><li>Participate on control systems (DCS, ESD, CCS, VMS, etc) FAT and SAT tests, commissioning and PAT as required.</li><li>Develop and mentor young engineers.&nbsp;</li></ul> Requirements: <ul><li>As the successful candidate you should hold a Bachelor degree or preferably master’s degree in related engineering discipline to control system (i.e Electrical Engineer, Electronic Engineering, System Engineer or equivalent) from a recognized and approved program.</li></ul>

Skills

Industry

Location

Jobtitle

435 plant engineering Jobs found

Process Engineer

Process Engineer

Process Engineer - Crude Distillation

Process Engineer - Distillation

Process Engineer - Distillation

Control System DCS (HGP)

Compressor Engineer

Chemical Engineer

Engineer, Capacity Planning

Instrument Engineer

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

435 plant engineering Jobs found

Process Engineer

Process Engineer

Process Engineer - Crude Distillation

Process Engineer - Distillation

Process Engineer - Distillation

Control System DCS (HGP)

Compressor Engineer

Chemical Engineer

Engineer, Capacity Planning

Instrument Engineer

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.