Field Machinist Technician

Sr. Machinist Technician (Mechanical Repairman)

Refinery Field Instrument Technician

Instrumentation Engineer

Instrumentation Engineer L2C

Responsibilities: <ul><li>Locate equipment faults and operating irregularities by making the necessary diagnostical tests, measurements and analyses. </li><li>This may be done with equipment in place in the field or if necessary by stripping equipment down in the field or shop.</li><li>Determine the nature of repairs to be made and replacement parts required.</li><li>Perform necessary maintenance on assigned equipment, stripping down, replacing, or machining parts as required. Reassemble equipment, run operating tests to ensure satisfactory repair.</li><li>Perform required rotating equipment alignment by rim and face, reverse and laser machine.</li><li>Set, adjust and perform steam turbine over speed trip test.</li><li>Troubleshoot and repair all kinds of hydraulic, electric (mechanical side) and pneumatic valve actuators.</li></ul> Requirements: <ul><li>You must hold an associate degree in mechanical engineering from a recognized and approved program. An advanced degree is preferred.</li><li>You should have a minimum of 8 years’ experience. </li><li>Equipment worked on should include all kinds of gas reciprocating and centrifugal compressors, steam turbines, vertical and horizontal pumps, manual and motor operated valves.</li><li>You must have a complete understanding and adherence of all work permit type requirements.</li><li>You must have a full understanding of all field mechanical principles of operation.</li><li>You should have strong analytical and troubleshooting skills in the field of rotating equipment.</li></ul>

Responsibilities : <ul><li class="ql-align-justify">Troubleshoot rotating equipment through necessary diagnostic tests, measurements and analysis by disassembling / reassembly test of equipment and determine steps of repair</li><li class="ql-align-justify">Apply applicable standard on the repair and installation of all types of rotating equipment in the field. I.E. foundation work, line-up, gear box, coupling and speed control settings, then test runs for acceptance</li><li class="ql-align-justify">Perform different balancing types of equipment parts</li><li class="ql-align-justify">Troubleshoot and repair all kinds of hydraulic, electric (mechanical side), and pneumatic valve actuators</li><li class="ql-align-justify">Ability to use all types of measuring instructions such as micrometers and dial indicators and other Inspection tools</li><li>Train junior machinists as required</li></ul> Requirements : <ul><li>Recognized apprenticeship / vocational Maintenance Machinist program with a minimum of Eleven years’ hands on experience in Machinist field as stipulated above under position description. Candidate must have the following the field experience requirements.</li><li>Ability to have computer soft skills such as: Microsoft Office and Internet.</li><li>Capability to performing equipment manual and laser alignment.</li><li>Candidate must have good communication skills in English speaking, reading and writing.</li></ul>

Responsibilities: As the successful candidate you will be required to perform the following: <ul><li>Fabricate and connect different size of instrument tubings and fittings.</li><li>Utilize different types of hand-held field communicator (TREX, Rosemount Configurator and Honeywell MC Toolkit Configurator) and other instrument test equipment.</li><li>Perform maintenance for the instrumentation attached to pumps, turbines and compressors</li></ul> Requirements: <ul><li>You must have a minimum of eight years’ experience as a field instrument tech in refining &amp; NGL plants and or petrochemical industries.</li><li>You must have a full understanding and adherence of all work permit type requirements.</li><li>You must have a full understanding of all industrial field instrument principle of operation, types and applications.</li><li>You must also have a full understanding of related Instrument Loop Diagram (ILD), Piping and Instrument Diagram (P&amp;ID), Instrument Specification Sheet (ISS) cause and effect, and other related drawing for Instrumentation.</li><li>You should have the ability to measure and convert field instrument signal.</li><li>You should have Strong analytical and troubleshooting skills in the field of Instrumentation.</li><li>You should be fully skilled to perform preventive maintenance and troubleshooting with the below list of field instruments;&nbsp;</li><li>configuration and maintenance of different model of Smart Transmitter (HART, Fieldbus and Honeywell Digital Transmitter)</li><li>diagnose and calibrate GWR Level transmitter (Magnetrol, Rosemount, Endress Houser and VEGA) Different model of Displacer type Level Transmitter smart and analog.</li><li>diagnose and calibrate, repair and replace control valve and positioner (Masoneilan, Fisher, valtek, METSO, FLOWSERVE, LCP100)</li><li>Test and repair Solenoid valve, Pneumatic relay, Boosters and regulators.</li><li>Instal, adjust and maintain of probes and approximators.</li><li>Maintain and replace deferent model of furnace heater flame scanner.</li></ul>

Responsibilities: <ul><li>Develop refinery and petrochemical unit’s control logic, philosophy, cause and effect&nbsp;</li><li>Participate in petrochemical unit’s process optimization and synergy between refinery and petrochemical</li><li>Review and update refinery and petrochemical redline drawings&nbsp;</li><li>Provide technical support for capital projects involving petrochemical units at various stages of the project life cycle (pre-feasibility, feasibility, Pre-feed, feed basic design, detailed engineering and construction)</li><li>Researching new technologies, regulations, and other factors that may affect business model</li><li>Strong experience in Refinery-Chemicals integration strategies, competitiveness and benchmarking&nbsp;&nbsp;</li><li>Liaison between Project Management and technical disciplines to achieve integration across all project disciplines.&nbsp;</li><li>Ensure scope, risk and interfaces are captured, manage Interfaces between internal and external parties and documented.&nbsp;</li><li>Develop, install, calibrate, service, and troubleshoot a wide variety of electronic and pneumatic instrumentation</li><li>Read and interpret blueprints, schematics, and technical manuals</li><li>Perform complex mathematical calculations to determine the correct size and type of instrument required for each application</li><li>Select and specify the most appropriate instruments and components for each installation</li><li>Install, program, maintain, and repair control systems and associated equipment</li><li>Perform Factory Acceptance Tests (FAT), Site Acceptance Test (SAT), Performance Acceptance Test (PAT), control wiring design, and logic design</li><li>&nbsp;Prepare and review all instrumentation engineering deliverables such as design basis, specification, data sheets, instrument index, I/O schedule, logic diagram, cable / JB schedule, Instrument Datasheets and sparing strategy&nbsp;</li><li>Review and comment on project design documents for pressure, flow, temperature, level and analytical field analyzer, in addition to control valves, MOVs, AOVs, and EIVs.</li><li>Develop and update instrument loops diagrams, as well as PFDs, PIDs, ISDs, ILDs, and Data Sheets.</li><li>Lead the instrumentation design, installation, and commissioning of the wiring, cabling, and grounding systems for instrumentation following Company and international standards.</li><li>Develop and update MAC agreement, DCS, ESD, 3rd party system VMS and CCS</li><li>Provide technical support for petrochemical unit’s operation readiness, pre-commissioning&nbsp;and commissioning including instrument loop check philosophy&nbsp;</li><li>Participation in all project studies such as HAZOP, SIL Study</li><li>Review and understanding of communication protocols like Modbus, FieldBus, TCP and General Process Automation Protocols</li></ul> Requirements: <ul><li>Bachelor’s degree in engineering preferred instrument or electric engineering.</li><li>At least 15 years of experience with a focus in the Refining &amp; Petrochemicals instrument engineering.</li></ul>

Responsibilities: <ul><li>Develop refinery and petrochemical unit’s control logic, philosophy, cause and effect&nbsp;</li><li>Participate in petrochemical unit’s process optimization and synergy between refinery and petrochemical</li><li>Review and update refinery and petrochemical redline drawings&nbsp;</li><li>Provide technical support for capital projects involving petrochemical units at various stages of the project life cycle (pre-feasibility, feasibility, Pre-feed, feed basic design, detailed engineering and construction)</li><li>Researching new technologies, regulations, and other factors that may affect business model</li><li>Strong experience in Refinery-Chemicals integration strategies, competitiveness and benchmarking&nbsp;&nbsp;</li><li>Liaison between Project Management and technical disciplines to achieve integration across all project disciplines.&nbsp;</li><li>Ensure scope, risk and interfaces are captured, manage Interfaces between internal and external parties and documented.&nbsp;</li><li>Develop, install, calibrate, service, and troubleshoot a wide variety of electronic and pneumatic instrumentation</li><li>Read and interpret blueprints, schematics, and technical manuals</li><li>Perform complex mathematical calculations to determine the correct size and type of instrument required for each application</li><li>Select and specify the most appropriate instruments and components for each installation</li><li>Install, program, maintain, and repair control systems and associated equipment</li><li>Perform Factory Acceptance Tests (FAT), Site Acceptance Test (SAT), Performance Acceptance Test (PAT), control wiring design, and logic design</li><li>Prepare and review all instrumentation engineering deliverables such as design basis, specification, data sheets, instrument index, I/O schedule, logic diagram, cable / JB schedule, Instrument Datasheets and sparing strategy&nbsp;</li><li>Review and comment on project design documents for pressure, flow, temperature, level and analytical field analyzer, in addition to control valves, MOVs, AOVs, and EIVs.</li><li>Develop and update instrument loops diagrams, as well as PFDs, PIDs, ISDs, ILDs, and Data Sheets.</li><li>Lead the instrumentation design, installation, and commissioning of the wiring, cabling, and grounding systems for instrumentation following Company and international standards.</li><li>Develop and update MAC agreement, DCS, ESD, 3rd party system VMS and CCS</li><li>Provide technical support for petrochemical unit’s operation readiness, pre-commissioning&nbsp;and commissioning including instrument loop check philosophy&nbsp;</li><li>Participation in all project studies such as HAZOP, SIL Study</li><li>Review and understanding of communication protocols like Modbus, FieldBus, TCP and General Process Automation Protocols</li></ul> Requirements: <ul><li>Bachelor’s degree in engineering preferred instrument or electric engineering.</li><li>At least 15 years of experience with a focus in the Refining &amp; Petrochemicals instrument engineering.</li></ul>

Responsibilities: <ul><li>Develop refinery and petrochemical unit’s control logic, philosophy, cause and effect&nbsp;</li><li>Participate in petrochemical unit’s process optimization and synergy between refinery and petrochemical</li><li>Review and update refinery and petrochemical redline drawings</li><li>Provide technical support for capital projects involving petrochemical units at various stages of the project life cycle (pre-feasibility, feasibility, Pre-feed, feed basic design, detailed engineering and construction)</li><li>Researching new technologies, regulations, and other factors that may affect business model</li><li>Strong experience in Refinery-Chemicals integration strategies, competitiveness and benchmarking&nbsp;</li><li>Liaison between Project Management and technical disciplines to achieve integration across all project disciplines.&nbsp;</li><li>Ensure scope, risk and interfaces are captured, manage Interfaces between internal and external parties and documented.&nbsp;</li><li>Develop, install, calibrate, service, and troubleshoot a wide variety of electronic and pneumatic instrumentation</li><li>Read and interpret blueprints, schematics, and technical manuals</li><li>Perform complex mathematical calculations to determine the correct size and type of instrument required for each application</li><li>Select and specify the most appropriate instruments and components for each installation</li><li>Install, program, maintain, and repair control systems and associated equipment</li><li>Perform Factory Acceptance Tests (FAT), Site Acceptance Test (SAT), Performance Acceptance Test (PAT), control wiring design, and logic design</li><li>Prepare and review all instrumentation engineering deliverables such as design basis, specification, data sheets, instrument index, I/O schedule, logic diagram, cable / JB schedule, Instrument Datasheets and sparing strategy&nbsp;</li><li>Review and comment on project design documents for pressure, flow, temperature, level and analytical field analyzer, in addition to control valves, MOVs, AOVs, and EIVs.</li><li>Develop and update instrument loops diagrams, as well as PFDs, PIDs, ISDs, ILDs, and Data Sheets.</li><li>Lead the instrumentation design, installation, and commissioning of the wiring, cabling, and grounding systems for instrumentation following Company and international standards.</li><li>Develop and update MAC agreement, DCS, ESD, 3rd party system VMS and CCS</li><li>Provide technical support for petrochemical unit’s operation readiness, pre-commissioning and commissioning including instrument loop check philosophy&nbsp;</li><li>Participation in all project studies such as HAZOP, SIL Study</li><li>Review and understanding of communication protocols like Modbus, FieldBus, TCP and General Process Automation Protocols.</li></ul> Requirements:&nbsp; <ul><li>Bachelor’s degree in engineering preferred instrument or electric engineering.</li><li>At least 15 years of experience with a focus in the Refining &amp; Petrochemicals instrument engineering.&nbsp;</li></ul>

Skills

Industry

Location

Jobtitle

6 pneumatic Jobs found

Field Machinist Technician

Sr. Machinist Technician (Mechanical Repairman)

Refinery Field Instrument Technician

Instrumentation Engineer

Instrumentation Engineer

Instrumentation Engineer L2C

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

6 pneumatic Jobs found

Field Machinist Technician

Sr. Machinist Technician (Mechanical Repairman)

Refinery Field Instrument Technician

Instrumentation Engineer

Instrumentation Engineer

Instrumentation Engineer L2C

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.