Regional Employee Relations Manager

IT Application Specialist

Solar Design Engineer

Staff Electrical Engineer

Facility Mechanic

Signal Integrity Test Technician

Manager Manufacturing Engineering - Mechanical Lead, Electronics Lead

Portfolio Assessment Analyst  - USA

Staff Power Product Development Engineer

Cost Accountant

Responsibilities: <ul><li>Lead and manage employee relations activities within the IMEA region, ensuring timely and fair case resolution in alignment with global ER policies and practices.</li><li>Provide direct ER leadership over the India business in particular, as the largest business in the region.</li><li>Support labor/industrial relations strategy across the region, including union engagement, worker committee processes, and required consultation protocols under local law.</li><li>Serve as the primary escalation point for complex and high-risk ER cases, partnering with Legal and other stakeholders as needed.</li><li>Directly manage ER case intake, investigation, resolution, and closure, ensuring a consistent, professional colleague experience across the region.</li><li>Partner with regional Business-Facing HR teams to deliver hybrid ER support where needed, especially in countries with minimal headcount or unique legal complexity.</li><li>Provide day-to-day direction and mentorship to regional ER Advisors, ensuring professional service delivery, skill development, and workload balance.</li><li>Monitor case trends, emerging risks, and workforce issues, delivering actionable insights and recommendations to regional and global leadership.</li><li>Execute the Employee Relations annual governance cycle within the region, including quarterly campaign delivery, stakeholder reporting, and process audits.</li><li>Ensure full adoption of ER case management protocols in ServiceNow, including accurate logging, escalation, documentation, and timely case closure.</li><li>Deliver coaching and education to site leaders on performance management, conflict resolution, workplace expectations, and policy application.</li><li>Collaborate on global ER projects and initiatives, bringing IMEA-specific insights to shape global practices, policies, and processes.</li><li>Support leaders to foster a fair, consistent, and compliant employee experience aligned with our client People Plan.</li></ul> Requirements: <ul><li>Education: Bachelor’s degree in Human Resources, Business Administration, or a related field; Master’s degree preferred.</li></ul> Experience: <ul><li>7+ years of experience in employee relations or HR, including regional or global support experience.</li><li>5+ years of employee relations or HR experience in India</li><li>3+ years managing complex employee relations cases required.</li><li>Experience working in a centralized Employee Relations delivery model preferred.</li></ul> Skills:&nbsp; <ul><li>Strong leadership and delegation skills, excellent problem-solving and conflict resolution skills, team leadership experience, and expertise in handling escalated cases and performance improvement processes.</li><li>Proficiency in English and Marathi required; additional languages based on region are a plus (e.g., Arabic, Hindi, French).</li></ul>

Responsibilities: <ul><li>Take ownership of the application management for our internal core systems: Microsoft 365, Business Central, and Dynamics CRM.</li><li>Ensure operational stability and act as the first point of contact for internal queries related to these platforms.</li><li>Collaborate with various departments to develop new requirements and processes, ensuring their optimal implementation within our systems.</li><li>Provide technical support for Dynamics CRM, including interfaces and data flows.&nbsp;</li><li>Analyze and optimize existing processes, leveraging Power BI reports for data-driven insights.</li><li>Work closely with external partners and internal stakeholders to maintain and advance system operations.</li><li>Actively contribute to the digitization and automation of our internal workflows.&nbsp;</li></ul> Requirements: <ul><li>Several years of experience managing Microsoft 365, Business Central, and Dynamics CRM.</li><li>Proficiency with Power BI and an interest in data-driven decision-making.</li><li>Enjoy working with diverse departments and have a good understanding of business processes.</li><li>Strong analytical skills, independent and structured working style.</li><li>Good communication skills and a high level of quality awareness.</li><li>Native-level German; good English skills are an advantage.</li></ul>

Responsibilities: <ul><li>Work with cross functional teams to transform VOC into internal specifications and design features, documented properly as Product Requirements Document.</li><li>Design and develop new products for renewable applications using metallic and polymeric material to meet customer requirements</li><li>Assess technical risk and compliance of project</li><li>Prototype sample development for feasibility studies</li><li>Product Data management of engineering bill of materials</li><li>Executing on cost optimization/reduction (VA/VE) opportunities for the business</li><li>Engineering communication with global team and localize global product teams in China</li><li>Preparing design verification test plans, Design C Process FMEAs, FEAs</li><li>Engineering sample preparation for design and process verification tests</li><li>Executing test plan within the lab, ensuring successful product testing and verification results</li><li>Perform failure mode analyses and improvements to optimize product</li><li>Recording results of design reviews, design decision meetings, and writing technical summaries</li><li>Assisting with product compliance and approvals for all new products and platforms</li><li>Work with FAI approvals, Process Capability Study, judging manufacturing deviations and make decisions on deviation acceptance</li></ul> Requirements: <ul><li>Must have a minimum of an Bachelors degree in a discipline of Engineering</li><li>More than 5 years design experience on connector, plug or terminal. Solar or battery energy storage relevant or power / utility design experience is plus,not must</li><li>Ability to develop connectors to meet critical global standards, such as ANSI, UL, IEEE, and IEC</li><li>Component material selection to optimize strength, electrical insulation, stability, and longevity, while meeting the product and standard requirements</li><li>Basic knowledge of product development processes in a stage-gate approach</li><li>A basic understanding of manufacturing processes, such as molding, stamping, plating, and assembly processes</li><li>Possesses high degree of initiative, technical competence, engineering process knowledge and strong communication skills</li><li>Fluent communication with own team, customers, internal business leaders and technology leaders in English (CET-4 or above)</li><li>LDFSS or DMAIC 6-sigma black or green belt an advantage</li><li>Familiarity of engineering software: Creo or Pro/E</li><li>Mastery of office software, such as Word, Excel, PPT, etc.</li></ul>

Responsibilities: <ul><li>Technical Leadership: Lead multiple advanced technology projects from concept through transfer, ensuring alignment with customer needs, market demands, and industry standards.</li><li>Convert trends into actionable technical roadmap recommendations.</li><li>Innovation &amp; Development: Act as subject-matter expert in cable and interconnect design (analog and digital), including modeling, simulation, and testing.</li><li>Cross-functional Collaboration: Work closely with global engineering and cross-functional teams, managing project budgets, schedules, and deliverables while ensuring strong communication to all stakeholders.</li><li>Documentation &amp; Compliance: Develop and maintain engineering documentation (design specifications, test plans, qualification reports). Ensure compliance with medical device industry standards.</li><li>Mentorship: Mentor and coach junior engineers, providing technical guidance and knowledge transfer.</li></ul> Requirements: Education: <ul><li>Bachelor’s degree in Electrical Engineering (with 8+ years of experience), OR</li><li>Master’s degree in Electrical Engineering (with 6+ years of experience).</li></ul> Experience: <ul><li>Proven experience in electrical interconnect and cable modeling/design/testing.</li><li>Preference for experience in medical device development.</li></ul> Technical Expertise: <ul><li>Proficiency in electrical interconnect modeling, simulation, and signal integrity analysis.</li><li>Hands-on experience with TDR and VNA characterization, high-speed signal testing, and application of transmission line theory.</li><li>Strong experience with full-wave electromagnetic simulations (e.g., Ansys HFSS, Maxwell, SI Wave).</li><li>Data analysis and scripting for test automation.</li><li>Electrical design experience with microcontrollers and embedded systems.</li></ul> Project Leadership: <ul><li>Demonstrated success in leading cross-functional and multi-site technical projects.</li><li>Communication &amp; Collaboration:</li><li>Excellent written and verbal communication skills.</li><li>Ability to collaborate effectively across multiple geographies.</li></ul> Personal Attributes: <ul><li>Self-motivated, adaptable, quick learner, and able to work independently while contributing to team success.</li></ul> Preferred Qualifications <ul><li>Familiarity with catheter-based medical devices and their regulatory standards.</li><li>Knowledge of EMI/RFI characterization for cables and connectors.</li></ul>

Responsibilities: <ul><li>Perform preventive and corrective maintenance, troubleshooting, and repairs on facility infrastructure and critical utilities, including HVAC systems for cleanroom environment, compressed air and vacuum systems, clean utilities (WFI, purified water, clean steam), boilers, chillers, temperature control units, and effluent water treatment equipment.</li><li>Support equipment setup, calibration, qualification, and creation of maintenance plans of facility utilities and equipment.</li><li>Conduct round and inspection to monitor system performance and proactively address issues.</li><li>Ensure proper gowning, cleanliness, and contamination control practices when working in classified cleanroom environments.</li><li>Document all maintenance activities accurately in maintenance logs, work orders, and computerized maintenance management systems (CMMS).</li><li>Collaborate with Engineering, Manufacturing, and Quality to support equipment investigations, deviations, and continuous improvement initiatives.</li><li>Follow all safety procedures, including lockout/tagout, confined space, and PPE use; actively contribute to a culture of workplace safety and compliance.</li><li>Maintain spare parts inventory, tools, and maintenance supplies in an organized and audit-ready condition.</li><li>Participate in training and cross-functional activities to support plant startup and readiness for regulatory inspections.</li><li>Provide technical support of production activities during absence of production support team members or when bandwidth is insufficient.</li></ul> Requirements:﻿ <ul><li>High school diploma or technical certificate required, Associate’s degree in a mechanical or technical field preferred.</li><li>3+ years of experience as a mechanic or technician maintaining utilities or facilities infrastructure in a pharmaceutical, biotech, or regulated manufacturing environment.</li><li>Experience with pharmaceutical manufacturing equipment and cleanroom protocols is highly desirable.</li><li>Strong troubleshooting skills for mechanical, electrical, and control system issues.</li><li>Familiarity with building management systems (BMS) and alarm monitoring systems.</li><li>Solid electrical and controls experience with automated systems, inspection machines, robotics, and camera systems highly preferred.</li><li>Understanding of cGMP, contamination control, and safety regulations (OSHA, FDA, EU Annex 1).</li><li>Ability to read and interpret mechanical drawings, equipment manuals, and SOPs.</li><li>Familiarity with CMMS platforms and basic computer skills (e.g., Microsoft Office).</li><li>Self-motivated with strong attention to detail, problem-solving skills, and the ability to work independently or in a team.</li><li>Willingness to work flexible hours, including weekends or off-shifts during production or commissioning activities.</li></ul> Work Environment: <ul><li>Hands-on role in a regulated, sterile pharmaceutical manufacturing facility with strict safety and aseptic requirements.</li><li>Requires frequent gowning, standing, and work in confined or classified areas.</li><li>Fast-paced startup environment, requiring adaptability, initiative, and a collaborative mindset.</li><li>Occasional lifting of heavy tools or parts; use of ladders, lifts, and hand tools required.</li><li>Physical requirements include lifting climbing ladders, electrical troubleshooting, and working with hand and power tools</li></ul>

Responsibilities: NPI Bulk Cable SI test: <ul><li>Follow Bulk cable SI test procedures to prepare fixture.</li><li>Follow Bulk cable SI test procedures to test bulk cables.</li><li>Check and confirm the SI test result</li></ul> Make NPI Bulk Cable SI test Report: <ul><li>After the test is done, summary the report and feedback to bulk cable PDE and MPDE</li></ul> Bulk Cable Physical data confirm: <ul><li>Confirm the physical test data with lab as a field representative if bulk cable PDE &amp; MPDE have concerns about the data</li></ul> Requirements: Education, Technical Qualification &amp; Experience: <ul><li>High school and above</li><li>Familiar with office software</li><li>Experience with high speed cable/cable assembly test</li><li>Experience with high speed test equipment (Digital Sampling Oscilloscope, Vector Network Analyzer, Bit Error Rate Tester, TDR, Pattern Generators, Power Supplies, etc.)</li><li>Have capabilities to interpret test/lab data to identify issues</li></ul>

Role Description: <ul><li>Transportation solutions BU makes products for Connecting and Sensing Data, Power and Signal for vehicles ranging from Two wheelers to Heavy Commercial trucks.</li><li>TS India operates out of 2 Manufacturing plants in Pune, Sales offices in Pune, Noida and Chennai and a Global engineering team in Bangalore.</li><li>The total team strength is of 3,500 employees. There is a clear business strategy till 2025 to support the business growth.</li><li>The growth is driven mainly driven from localization of Core India Specific products and also New technology products.</li></ul> Responsibilities <ul><li>Responsible to lead and drive a team of engineers for design development and improvement of Special Purpose machinery, to the plant and execution of all new projects as per agreed APQP timelines.</li><li>End to end responsible for capturing the voice of Customers and all stakeholder requirements of the product and then assess review and correct machine design to meet the expectations.</li><li>Conducting design reviews effectively resulting reliable equipment and less rejections.</li><li>Train and Coach the team to build the M.E capability and competency.</li><li>Improve the process to reduce CoPQ and improve OEE, by quality, up-time and productivity.</li><li>Identify Automation and Cost Saving opportunities and able to deliver result.</li></ul> Requirements: <ul><li>14+ years of experience working in medium or large matrix organizations.&nbsp;</li><li>Hands on Experience in in high speed &amp; high Precision SPM designing , building and trouble shooting.</li><li>Experience in header assembly machines, fast and high precision Automation machines for Automotive industry is preferable.</li><li>Mechanical and Pneumatic systems trouble shooting and design skills.</li><li>Experience in EOL testing, like leakage, Electrical tests, AOI(Camera Vision inspection).</li><li>Updated knowledge on statistical process control systems.</li></ul>

Responsibilities:&nbsp; <ul><li>Support function to enhance frequency and accuracy of forecasting for generic pharmaceutical products (Oral, Injectables / complex injectables, inhalational products etc.) and business development activities.</li><li>Effectively explain modeling assumptions to key stakeholders including senior leadership and triangulate</li><li>assumptions with other data and forecasting model to pressure test them and develop “what if” scenarios.</li><li>Create and maintain commercial assessments to be utilized to support the company requirements relating to annual budgets, strategic plans, capacity expansions, pipeline review, business opportunities and recurring financial projections.</li><li>Establish and maintain a network of secondary and primary research information in support of planned generic and innovative products to develop product launch plans and strategies.</li><li>Develop reports and analyze the effectiveness of standard business assumptions for various aspects of product forecasting, including but not limited to generic sub-rate, market share and pricing using data analytics tools.</li><li>Develop and maintain forecast vs actual reports for launched products and utilize analytical insights to improve forecast accuracy of pipeline products.</li><li>Gain expertise in EPM planning tool to become a superuser and design consolidated reports required by stakeholders in organization such as pipeline volumes etc.</li><li>Our client is an equal opportunity and affirmative action employer.</li><li>All qualified applicants will receive consideration for employment without regard to race, color, national origin, gender, religion, age, disability, veteran’s status, or any other classification as required by applicable law.</li></ul> Requirements:&nbsp; <ul><li>BA/BS degree required in Science, Business or Marketing (Advanced degree is preferred).</li><li>A well-rounded professional with 2+ years’ experience in the Generic Rx pharmaceutical industry, specifically in areas of sales, marketing or supply and logistics.</li><li>Demonstrated understanding of the pharmaceutical industry and marketing principles.</li><li>Familiarity with regulatory framework for pharmaceutical products is desirable.</li><li>Demonstrated excellence in generic sales or marketing and effectively managing multiple projects/priorities on- time</li><li>Working knowledge of competitive intelligence sources such as IQVIA, Cortellis, Globaldata, Evaluate, IPD and company financial filings etc.</li><li>For commercial assessment purposes.</li><li>Proficiency in computer technology including the Microsoft suite of tools (Outlook, Excel, PowerPoint, Word and others).</li><li>Experience with data analytics software such as Tableau, Alteryx and Power BI is desirable but not required.</li></ul>

Responsibilities: <ul><li>Collaborate with cross-functional teams to design, develop, and launch new power connector and cable assembly solution products for data center applications.</li><li>Provide leadership and manage the complete product development life cycle (starting from the voice of the customer, ideation, Design Conceptualization, Creation of product specifications, 3D design, Prototyping, Product testing, Product qualification, Project Execution &amp; Sustenance till product end of life)</li><li>Work closely with customer/sales/PM in getting the right and clear VOC (voice of customer), and make engineering evaluation/proposal to the customer.</li><li>Follow LEANPD Project Process to support the project team from the PDE perspective to complete the Project (NPI or Sustaining) on time, with quality, and within budget. Drive the development and release of products, scale-up through stage-gate reviews, ensuring milestone commitments are maintained.</li><li>Develop and manage product documentation, including product requirements, design documents, and test plans/reports.</li><li>Work with global manufacturing resources, procurement, and outside suppliers to meet all technical, quality, and cost objectives.</li><li>Work closely with suppliers to identify and qualify new components and technologies.</li><li>Conduct thorough design verification and validation testing to ensure the product meets the required specifications.</li><li>Collaborate with manufacturing teams to ensure a smooth transition to production.</li><li>Mentor and guide junior engineers and technicians to develop their skills and knowledge.</li><li>Conduct competitive analysis and market research to identify opportunities for innovation and differentiation.</li><li>Build a deep understanding of market and customer needs by fostering a connection between the business engineering teams and the customer engineering teams.</li><li>Maintain a System level understanding of customer application and the product design/concept necessary for providing a solution to the customers’ expectations.</li><li>Technical support to customer, sales, PM, and plant team. Conduct necessary tests, engineering analysis, troubleshooting, and verification.</li><li>Introduce breakthrough technologies by partnering technically with our customers worldwide and with our Global competency centers to enhance business revenue &amp; growth.</li><li>Apply engineering best practices to reduce cost and sustain existing products to meet customer’s cost targets.</li></ul> Requirements: Preferred Years of Exp viz Minimum Years of Experience: <ul><li>Bachelors or Masters degree in Mechanical or Electrical Engineering.</li><li>Strong understanding of mechanical and electrical engineering principles.</li><li>Experience with product development processes, including design, prototyping, and testing.</li><li>Strong problem-solving skills and ability to work independently or as part of a team.</li></ul> Role Type: Skills: <ul><li>Minimum of 10 years of experience in product development, preferably in the technology industry with a minimum of 5 years in the Cable Assembly or connector related.</li><li>This highly technical position requires an individual who can work independently.</li><li>Experience in product compliance certification ( Product, Safety, Environmental substance control)</li><li>Experience in design for manufacturing and assembly (DFMA), design for cost (DFC), design for manufacturing (DFM).</li><li>Capability and experience in presentation on products, solutions, and technologies.</li><li>Previous experience in working in high-performing multi-disciplinary global engineering teams.</li></ul>

Responsibilities: <ul><li>Lead the plant’s cost accounting function, including design and implementation of robust cost control systems.</li><li>Develop and manage detailed product costing, activity-based costing models, and process-wise profitability analysis.</li><li>Provide deep insights on cost trends, production efficiency, and inventory usage to support strategic decision-making.</li><li>Analyze standard vs actual costs and proactively address variances through root cause investigation and corrective actions.</li><li>Conduct plant-wide cost audits and coordinate with production, procurement, and supply chain teams for financial alignment.</li><li>Drive initiatives in waste reduction, process improvement, and cost optimization at both micro and macro levels.</li><li>Oversee inventory valuation, stock audits, and reconciliation of raw materials, WIP, and finished goods.</li><li>Collaborate with the Finance Head and Plant Director for capital expenditure planning and cost-benefit analysis.</li><li>Ensure compliance with Cost Accounting Standards, internal controls, and regulatory reporting requirements.</li><li>Prepare high-level MIS reports, dashboards, and executive summaries for senior management and board-level reviews.</li></ul> Requirements:﻿﻿<ul><li>CMA (Cost &amp; Management Accountant) qualified; additional MBA in Finance or CA Inter is an advantage.</li><li>8-10 years of progressive experience in cost accounting, with at least 3 years in a senior role in a manufacturing plant.</li><li>Proven track record in implementing cost optimization strategies and improving profitability.</li><li>Strong command of ERP systems (e.g., SAP, Oracle) and advanced Excel/Power BI for analytics.</li><li>In-depth understanding of cost structures, production processes, and inventory management in industrial environments.</li><li>Excellent communication, leadership, and cross-functional collaboration skills.</li></ul>

Skills

Industry

Location

Jobtitle

23 power bi Jobs found

Regional Employee Relations Manager

IT Application Specialist

Solar Design Engineer

Staff Electrical Engineer

Facility Mechanic

Signal Integrity Test Technician

Manager Manufacturing Engineering - Mechanical Lead, Electronics Lead

Portfolio Assessment Analyst - USA

Staff Power Product Development Engineer

Cost Accountant

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

23 power bi Jobs found

Regional Employee Relations Manager

IT Application Specialist

Solar Design Engineer

Staff Electrical Engineer

Facility Mechanic

Signal Integrity Test Technician

Manager Manufacturing Engineering - Mechanical Lead, Electronics Lead

Portfolio Assessment Analyst - USA

Staff Power Product Development Engineer

Cost Accountant

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.