Power Systems Reliability & Asset Integrity Engineer

Power Systems Asset Integrity Engineer

Asset Integrity Engineer

Electrical Engineer

Facilities Engineer

Digital Plant Solution Architect

Instrument & Electrical Reliability Engineer

Validation Engineer

Principal Engineer

Automation & Power Facilities Planning Engineer (Electrical Planning)

Responsibilities: <ul><li>Lead initiatives and technologies intended to enhance and shorten our power restoration time.</li><li class="ql-align-justify">Leads and recommends new continuous improvement solutions for installations or modifications to improve existing facilities.</li><li class="ql-align-justify">Support power system operating areas to restore the power during the tactical response plan activation.</li><li class="ql-align-justify">Oversees all PS capital assets and mobile assets conditions and report to needed action to Power system Operating.</li><li class="ql-align-justify">Promote the introduction of appropriate new technology and techniques associated within area of expertise.</li><li class="ql-align-justify">Communicate complex issues associated with area of expertise in a clear and concise manner both verbally &amp; in writing.</li><li class="ql-align-justify">perform Technology project packages development.</li><li class="ql-align-justify">Collaborate with internal stakeholders and ensure that SA’s current &amp; future requirements are clearly addressed and communicated.</li><li class="ql-align-justify">Support technical consultation meetings with External OEM’s, Vendors, contractors and service providers of Mobile Assets regarding operational performance, design compliance and maintainability.&nbsp;&nbsp;&nbsp;</li><li class="ql-align-justify">Implement compliance with SA and other international standards such as IEC, IEEE, ANSI and BS.</li><li class="ql-align-justify">Lead and contribute to incident investigation tasks.</li><li class="ql-align-justify">Represent SA on national and international technical committees and fora as required.</li><li class="ql-align-justify">Develop and review tactical response plans. </li><li class="ql-align-justify">Performs inspections and witnesses tests on all SA Mobile substations and Lindesay towers.</li><li class="ql-align-justify">Inspects visually all capital assets across PS to ensure their healthiness&nbsp;</li></ul> Requirements: <ul><li class="ql-align-justify">The successful candidate should hold a minimum of Bachelor Degree in Electrical Engineering preferably power engineering working on High Voltage Power Systems Electrical Equipment. Ten (10) years of experience in Oil &amp; Gas, Petrochemical Industry or Power utility in the field of Power Systems Reliability &amp; Asset Integrity Management.</li><li class="ql-align-justify">&nbsp;Shall have hands-on field experience in power equipment maintenance and operation.</li><li class="ql-align-justify">Shall have a solid experience and knowledge in substation equipment design, testing, installation, commissioning, as well as having wide knowledge in O&amp;M new technologies. </li><li class="ql-align-justify">Familiar with&nbsp;emergency preparedness and power business continuity programs.</li><li>ertified in Business Continuity Management (BCM), Certified Enterprise Risk Management (ERM).&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>Demonstrate specialist skill level of design and operation of Medium and High Voltage Power Equipment.</li><li class="ql-align-justify">The ability to build and develop effective relationships with internal and external contacts, including good written and oral communication skills. </li><li class="ql-align-justify">Requires strong awareness of resource management, such as system access, safety, contractor and manufacturing capability.</li><li class="ql-align-justify">Requires effective influencing skills and the ability to apply this capability in a global matrix organization.</li><li class="ql-align-justify">Good problem solving, decision making and analytical skills.</li><li class="ql-align-justify">Good knowledge in Mobile assets maintenance, transportation, and Pre-commissioning.&nbsp;</li></ul>

Responsibilities: <ul><li class="ql-align-justify">Develop, manage, update and monitor implementation of short and long-term asset management policy, strategy, initiatives and work plans for power system asset and ensure alignment with overall company Strategic Asset Management Program.</li><li class="ql-align-justify">Manage PS owned Substations by deploying Asset Integrity Management System (AIMS) Program.</li><li class="ql-align-justify">Manage Power Systems HV Electrical Equipment Life Cycle Managements Process. </li><li class="ql-align-justify">Develop and manage Contingency Plans to sustain Power Supply in case of Substation/facility interruptions.</li><li class="ql-align-justify">Evaluate risk-based maintenance methodology based on likelihood and consequences.</li><li class="ql-align-justify">Coordinate asset management plans and initiatives with operational entities.</li></ul> Requirements: <ul><li class="ql-align-justify">The successful candidate should hold a minimum of Bachelor Degree in Electrical Engineering working on High Voltage Power Systems Electrical Equipment. </li><li class="ql-align-justify">Ten (10) years of experience in Oil &amp; Gas, Petrochemical Industry or Power utility in the field of Power Systems Reliability &amp; Asset Integrity Management.</li><li class="ql-align-justify">&nbsp;Familiar with&nbsp;reliability programs such as (RCM, MTBF, Bad actors, etc.) including&nbsp;SAP system or equivalent computerized systems.</li><li class="ql-align-justify">Certified Maintenance &amp; Reliability Professional (CMRP), Certified Reliability Engineer (CRE), TapRooT Analyst or 6 Sigma Certification is preferred.</li></ul>

Responsibilities :&nbsp; <ul><li>Provide the project’s management teams and operating facilities with guidance to establishing and safeguarding asset integrity throughout asset lifecycle (i.e., Design, Procurement and Construction, Operation and Maintenance and Decommissioning).</li><li>Initiate or conducts special studies for improving facilities or operation; provides specialized technical service in recognized engineering fields; acts as consultant on complex engineering problems; designs and projects; coordinates or directs work of other engineers.</li><li>Drive the implementation and improvement of an integrated medium to long-term AIMS for variety of asset types, including refineries, gas plants, GOSPs, LNG, terminals, and infield flow and trunk Lines.</li><li>Define asset integrity and process safety targets and establish standards to sustain operational excellence.</li><li>Provide direction to the development and implementation of AIMS.</li><li>Evaluate and adopt industry best practices to benchmark our client AIMS against other international oil companies, taking into consideration the applicable regulations, codes, and standards.</li><li>Strategize and formulate an assurance and reporting process, to confirm that technical integrity barriers remain fit for purpose.</li><li>Participate in management steering committees to periodically review the asset integrity KPIs, SCEs Barriers performance standard verification, focused asset integrity reviews audit findings, and accident investigation findings.</li><li>Benchmark and adapt lessons learned identified from internal and external events, provide recommendations to provide continuous assurance to management that the assurance methodology, applied to sustain the health of the SCEs and integrity barriers, is sufficient in mitigating potential threats arising from changes in major accident hazard scenarios.</li><li>Strategize and drive the development and implementation of an effective technical integrity framework and communications infrastructure, through detailed analysis of design basis, operating envelopes (limits), and maintenance philosophies and strategies.</li><li>Provide expert advice and assistance to Company organizations, outside vendors, manufacturers, and design firms on matters relating to AIMS.</li><li>Work with multidisciplinary teams or with task forces assigned to analyze or solve specific integrity and performance degradation issues or failure analysis, and suggest methods for the prevention of chronic failures.</li></ul> Requirements :&nbsp; <ul><li>A Bachelor degree in engineering, preferably Mechanical, Material or Electrical. A master’s degree is desirable.</li><li>Candidate must have strong technical capabilities and relevant experience with Asset Integrity Management practices.</li><li>Certified as a fundamental Engineer (F.E.) license.</li><li>A minimum of 10 years of professional experiences in the Oil and Gas business.</li><li>Experienced in international standards related such as, ASME &amp; API.&nbsp;</li><li>Has excellent communication, presentation, interpersonal and networking skills.&nbsp;</li><li>Flexibility to travel both domestically and internationally.&nbsp;&nbsp;</li><li>Comfortable to work both independently and with cross-departmental teams.</li></ul>

Role Description: <ul><li>Our client is seeking an Electrical Engineer to join our Unconventional Resources Operations Department (UROD).</li><li>The UROD is responsible for operating all the surface facilities, which include the field wells and processing facilities.</li><li>Your primary role as an Electrical Engineer in an unconventional asset will be to provide professional advice and guidance regarding electrical systems, schemes, equipment or techniques, facility designs and solutions to operating and maintenance problems.&nbsp;</li><li>You will have a thorough understanding of plant operations, specialized experience in electrical high voltage and low voltage systems for large scale complex electrical distribution system.&nbsp;</li><li>In addition, you will have experience in power reliability analysis for electrical distribution systems which involves carrying out power system studies using software like ETAP etc.</li></ul> Responsibilities: <ul><li>As the successful candidate you will be required to perform the following:</li><li>Provide day-to-day technical support to Operations and Maintenance Units to troubleshoot and fix electrical systems including reporting and documentation.</li><li>Provide expert advice and assistance to design, construction, maintenance engineers and operation personnel on all matters related to electrical systems.</li><li>Develop engineering conceptual plans for the new installation and upgrade projects including development of work scopes, calculations and detailed technical specifications.</li><li>Review Project Proposals and Detailed Designs packages for new facilities.</li><li>Develop and maintain the UR engineering standards and design best practices.</li><li>Participate on the testing &amp; commissioning of the new facilities and Turnaround and Inspection (T&amp;I).</li><li>Update and maintain engineering documentation and drawings.</li><li>Analyze system performance and find solution for Energy saving.</li><li>Ensure quality, cost effective and timely solutions to any upgrade.</li><li>Test and pilot new technologies.</li><li>Ensure full HSE Compliance.</li><li>Report and analyze key performance indices.</li><li>Make recommendations for technical/economic optimization of existing facilities.</li><li>Lead feasibility/profitability studies for new facilities.</li><li>Contribute to Business Unit strategy.</li><li>Assists in the training, development and mentoring of younger staff.</li><li>Provide analysis, evaluation and interpretation in support of projects, processes, and financing related to our clients capital investment decisions.</li><li>Maintain and expand on contacts within the industry.</li><li>Regularly interact with other professionals in various company organizations involved in capital planning and economic analysis.</li></ul> Requirements: <ul><li>You must hold a Bachelors Degree in Electrical Engineering from an accredited university.&nbsp;</li><li>A higher degree is preferred.</li><li>A Professional Engineer (P.E.) registration is desirable but is not essential.</li><li>You should have a minimum of 15 years working experience in Electrical engineering, with at least 10 years’ experience in the field of Oil and Gas Industry.</li><li>You must be conversant and have working knowledge of industry codes and standards, such as NFPA, ANSI IEEE, IEC, API, NEC, NACE and others.</li><li>Experience with specifications and data sheets for Electrical equipment like EHV GIS/AIS Switchgear, Power</li><li>Transformers, large synchronous/induction motors, HV/LV Switchgears and Control gears, EHV/HV/LV Cables,Bus ducts, EHV GIBs, UPS, Battery Charger, NGR, Panel boards is a requirement.</li><li>You should also have experience in preparation of Single line diagrams, protection and metering schemes, motor schematics, Hazardous area classification drawings, substation automation architecture, synchronizing and bus changeover schemes.</li><li>Experience in electrical engineering calculations like Grounding/Earthing, Battery charger/Battery sizing,</li><li>Transformer sizing, Cable sizing, Electrical Load schedules, Lighting.&nbsp;</li><li>Also knowledge of Electrical Power system studies including Short Circuit, Load Flow analysis, Motor starting, Arc Flash Hazard studies,</li><li>Relay coordination and setting using software like ETAP is essential.</li><li>You must also demonstrate the ability to work with design contractors to review contractor design packages, provide input to FEED packages, introduce new technology to enhance company productivity, suggest innovative solutions to optimize equipment performance, demonstrate safe working practices.&nbsp;</li><li>Be able to conduct failure analysis and provide recommendations for failed electrical equipment.&nbsp;</li><li>Experience with electrical equipment field Installation, Commissioning and testing as well as in Electrical Equipment layouts, plant cable routing layouts, lighting and grounding layouts is preferred.</li><li>You should be able to communicate with multidiscipline engineers to complete projects.</li><li>Have proven ability to communicate effectively with management at all levels within the organization.</li><li>Strong written and oral communication skills are also essential to be able to communicate what are frequently complex technical, economic and commercial concepts in a clear and succinct manner to individuals and groups from diverse professional backgrounds.</li><li>You must be able to work effectively with the minimum of supervision on relatively unstructured tasks.&nbsp;</li><li>You must be willing to work in remote areas depending on the project or task assignments.</li></ul>

Role Description: <ul><li>We are seeking a Marine Facilities Engineer (MFE) to join the Tanajib Marine Operations Division, which is part of the Marine Department.</li><li>The Marine Department provides services to offshore customers, including: tugs for terminal, maintenance vessels for offshore platforms, and Anchor Handling Tug Supply &amp; Safety vessels (AHTSS) for drilling rigs, diving operations and under water repairs, etc.</li><li>The primary responsibility of the MFE is the asset management of marine facilities by initiating, consulting, and monitoring construction, maintenance, improvement, and modification work. The marine facilities infrastructure and equipment assets include: terminal management systems, piers, buildings, yards, roadways, tanks, bulk silos, pipework, valves, pumps, instrumentation, electrical substations, generators, oily waste and</li><li>sewage lift systems.</li></ul> Responsibilities: You will be required to perform the following: <ul><li>Plan, schedule and monitor the following: projects, maintenance activities, and major improvements and modifications to facility assets.</li><li>Coordinate with other units, divisions and departments in the execution of projects and maintenance activities in marine facilities.</li><li>Lead facilities management (both Co. and contractor personnel) in the performance of duties.</li><li>Assure facilities construction and maintenance conforms to engineering design, specifications, codes, and standards.</li><li>Review design proposals to assure compliance with scope, design, maintenance, and repair requirements.</li><li>Prepares reports, studies, and recommendations for changes to marine facilities.</li><li>Forecast requirements and overseas asset and equipment integrity, ensuring reliability for continuity of service provision.</li><li>Ensure reports, logs, checklists, inspections, and asset record keeping are correct and up-to-date.</li><li>Coordinate land use within facilities, and review external land use permits for conformity and planning development forecasts.</li></ul> Requirements: <ul><li>As the successful candidate, you will hold a Bachelor’s degree in Engineering and have at least 15 years of experience of facilities management for marine facilities or plants.</li><li>Must have excellent knowledge of port or harbor facilities, plants or similar infrastructure</li><li>In addition to the technical requirements, you must possess excellent problem-solving skills and a high degree of adaptability.</li><li>Demonstrate excellent communication skills, both orally and in written English.</li></ul> Working environment <ul><li>Our high-performing employees are drawn by the challenging and rewarding professional, technical and industrial opportunities we offer, and are remunerated accordingly.</li><li>At the Company, our people work on truly world-scale projects, supported by investment in capital and technology that is second to none. And because, as a global energy company, we are faced with addressing some of the world’s biggest technical, logistical and environmental challenges, we invest heavily in talent development.</li></ul>

Responsibilities : <ul><li>Manage activities that take place during solution ideation, solution design, and solution implementation.</li><li>Review business process and functional requirements to optimize the solution architecture requirement for the solution, recommending potential options, (which may include RFIs, RFPs or prototype development), selecting the most optimal option, and the development of a roadmap for the selected solution.</li><li>Setting the collaboration framework, analyze and documenting functional requirements.</li><li>Analyze current technology architecture used within the company and determine ways to improve and optimize it.</li><li>Participating in technology selection, controlling solution development and Supporting project management.</li><li>Communicates the optimized architecture to the stakeholders, collaborates and coordinates with existing domain architects in the formalization and adoption of proposed standards and procedures.</li><li>Ensure that proposed solution not only fulfils the functional requirements but also comply with the standards guidelines of technology solutions.</li><li>Introduce necessary changes to standards when necessary.</li><li>Supports the architectural aspects of all digital plant application projects.</li><li>Develops and executes solutions which further reduce the percentage of time spent on reactive work.</li></ul> Requirements : <ul><li>Bachelor’s degree in Computer Science, Chemical, Electrical or Industrial Engineering. Advanced education / degree is preferred</li><li>From ten to fifteen (10-15) years of experience, as a solution architect in refining or gas plants with strong knowledge in designing, implementing and commissioning of digital plant solutions for refinery or gas plants.</li><li>Fundamentals of Engineering, Professional Engineering, Chartered Engineer, or equivalent certification is highly desirable.</li><li>Process plants for the Hydrocarbon Industry that includes but not limited to GOSPs, Gas Plants, Refineries, Petrochemical, Terminal, bulk plant, and pipeline.</li><li>Hydrocarbon Industry Business Process Managements (BPM), work processes (W/P’s) and associated workflows for major processes such as but not limited data; production planning, production scheduling, mass &amp; hydrocarbon loss management, energy management, process quality management, inventory management, operation management, asset reliability management, asset integrity management, predictive maintenance, process safety management, environmental management.</li><li>Major rotating and stationary assets operation and performance such as steam boiler, compressors, pumps, fired heaters, reactors, and distillation columns.</li><li>ISA 95 Model Architecture and its associated five core function, namely; Manufacturing Operation Management (MOM) ISA 95 Modeling decomposed five core functions, [i.e. Production Operation Management (POM), Quality Operation Management (QOM), Inventory Operation Management (IOM), Maintenance, Reliability &amp; Integrity (MRI) and Compliance Regulatory Management (CRM) for safety, Environmental and hazard.</li><li>Decomposed nine sub-functions of the ISA 95 model namely; definition, resourcing, scheduling, data collection, tracking, dispatching, execution and performance.</li><li>Enterprise architecture frameworks such as TOGAF or Zachman and architecture analysis for decomposing business processes into functional, application, and data architectures.</li><li>Software technologies and vendors evaluation and selection based on quantitative decision analysis methods.</li><li>Develop business case and benefit/cost analysis for Digital Plant solutions.</li></ul>

Responsibilities: People Management <ul><li>Advise and assist Maintenance l&amp;E Engineers, electricians, instrument technicians and production supervisors on complex electrical and instrument repairs and troubleshooting methodologies.</li><li>Support all the efforts towards building a harmonious work environment to promote the spirit of cooperation and team building within the l&amp;E Reliability Section.</li><li>Provide required technical support in matters requiring higher level of expertise and consultation.</li></ul>&nbsp;Instrument &amp; Electrical Assets Integrity <ul><li>Develop and implement Reliability strategies by utilizing conventional techniques such as Reliability Centred Maintenance (RCM), Root Cause Analysis (RCA), Preventive and Predictive maintenance (PPM) strategies, and other industry accepted reliability techniques to analyse l&amp;E equipment failures and produce cost effective strategies to ensure safe and reliable operation of the plant.</li><li>Implement Mechanical Integrity &amp; Quality Assurance best practices. Work with other concerned departments to develop &amp; execute appropriate Quality Assurance (QA) practices and develop a mechanism to assess the effectiveness of QA practices.</li><li>Proactively identify l&amp;E Equipment Reliability Issues and develop engineering solutions for chronic and sporadic equipment reliability problems. Work with technical, production and maintenance to implement solutions.</li><li>Lead Reliability Improvement efforts of the plant from the platform of Reliability Improvement Teams (RITs).</li><li>Perform Root Cause Failure Analysis to identify various failure modes and recommend strategies to help improve l&amp;E equipment reliability.</li><li>Evaluate RCA reports, criticality studies, equipment strategies, and risk assessments on equipment to ensure consistency and compliance with company procedures and policies.</li><li>Evaluate facility incidents that affect reliability and ensure that appropriate RCAs are performed.</li><li>Assist in tracking RCA findings and completing action items in a timely manner .</li><li>Develop Instrumented Protective Systems (IPS) related work processes in the company to comply with regulatory requirements mandated both by International Standards (IEC61511/ISA 84) and Company Standards RMS 5700.</li><li>Administer the development of detailed engineering calculations and drawings including the preparation of Single Line Diagrams, Schematic Diagrams, Cable Schedules, Interconnection drawings, loop drawings, Instrument data sheets etc.</li><li>Prepare technical inquiry requests to vendors, participate in the technical evaluation of vendor bid offers.</li><li>Review vendor drawings and documents and review design calculation. Ensure vendor equipment specifications meet the design specifications and are within budgeted costs.</li><li>Reviews equipment specs/designs to ensure equipment can meet reliability objectives.</li><li>Participate as a technical adviser on capital projects and turnarounds.</li><li>Participates in the MOCs and PSSRs of new installations to assure adherence to functional specifications.</li><li>Act as subject matter expert (SME) in performing root cause analysis (RCA) investigations and provides expertise to the RCA teams as required.</li><li>Review and optimize ITPMs for functionally critical l&amp;E equipment (MICE).</li><li>Drive consistency in l&amp;E equipment design across the site as part of projects review including consistency in maintenance strategies.</li><li>Provide communication to area resources about improvement projects.</li><li>Provide input as needed on projects to ensure design and reliability issues are considered and addressed on new projects.</li><li>Provide guidelines to Maintenance in order to ensure that Life Cycle Asset Management processes are complied with throughout the entire life cycle of new and old assets.</li><li>Champion continuous improvement fosters relationships between various plant functions to focus on total quality.</li></ul>&nbsp;Policies, Systems, Processes and Procedures <ul><li>Contribute to the identification of opportunities for the continuous improvement of departmental systems, policies, processes and practices taking into account ‘international leading practices in order to improve productivity and operational efficiency.</li><li>Provide critical input to support the development of l&amp;E Reliability Section’s systems, policies, processes, and procedures in order to meet business requirements.</li><li>Ensure team members comply with all l&amp;E Reliability Section’s policies, processes, standard operating procedures and instructions so that work is carried out in a controlled and consistent manner.</li></ul>&nbsp;Reporting <ul><li>Prepare relevant reports in a timely and accurate manner in order to meet the departmental</li><li>Prepare relevant reports in a timely and accurate manner in order to meet the departmental requirements, policies and standards.</li><li>Support supervisor in the preparation of the annual operating and capital budgets. Ensures reliability projects and activities are completed on time and within budget.</li><li>Communicate ideas, present, and explain technical knowledge to stakeholders.</li><li>Communicate to Supervisor to inform on issues that require additional follow up.</li><li>Report incidents and near misses and participate in investigations as required.</li></ul>&nbsp;Quality, Health, Security, Safety and Environment <ul><li>Ensure compliance with regulatory requirements and relevant quality, health, safety, security and environmental procedures and controls across the Department to guarantee employee safety and delivery of high quality products/ services.</li></ul>&nbsp;Requirements: Experience <ul><li>Required (Years2 / Job Level3 / Industry): Total of 7-10 years of experience in the fields of Electrical equipment &amp; systems maintenance and technical support preferably in a process industry, out of which 5-7 years at a similar position.</li></ul>&nbsp;Preferred (Years2 / Job Level3 / Industry): Experience in Petrochemicals IndustryOther Job Specific Requirements and/or Vocational Accreditations<ul><li>Well conversant with protection and control systems of a large process plant involving High and Medium Voltages (132/33/6KV).</li><li>Solid understanding of the concepts of electrical protection system design and intelligent protection relays operation.</li><li>Experience in failure mode &amp; effect analysis and good understanding of failure mechanisms of Electrical equipment.</li><li>Troubleshooting techniques and ability to analyze and resolve engineering problems independently.</li><li>Knowledge of relevant IEC and IEEE Standards and or other well recognized standards.</li><li>Familiarity with ETAP and similar system modeling and analyzing tools would be an additional advantage.</li><li>Relevant experience in having performed load flow &amp; short circuit studies, Relay discrimination and coordination studies for an industrial electrical distribution system.</li><li>Familiarity with CMMS preferably SAP.</li><li>Sound understanding of industrial PLC and Packaged control systems.</li></ul>&nbsp;Education Required (Qualification1 / Discipline): <ul><li>﻿Bachelor’s degree in electrical/ Electronics/Instrumentation Engineering.</li></ul>&nbsp;Experience Required (Years2 / Job Level3 / Industry): <ul><li>Total of 7-10 years of experience in the field of Instrumentation &amp;</li><li>Controls maintenance and technical support preferably in a process industry, out of which 5-7 years at a similar position. Experience in Petrochemicals Industry.</li></ul>&nbsp;Other Job Specific Requirements and/or Vocational Accreditations <ul><li>Knowledge of automation/control systems, including: DCS, PLC, Safety Instrumented Systems, function block and ladder logic programming, industrial instrumentation, electrical equipment and process analytical systems.</li><li>Experience with design and maintenance of Plant Instrumentation, Control Valves, and Safety Instrumented Systems and process safety management programs.</li><li>Functional Safety Certification as Functional Safety Engineer (FS Eng.) preferred.</li><li>Hands on experience on the use of ExSILentia software preferred.</li><li>Working Knowledge on International Standards related to Instrumentation and Controls design and maintenance such as IEC, ISA, FCI etc. as well as Functional Safety standards IEC61511/ISA 84.</li><li>Experience in failure mode &amp; effect analysis and good understanding of failure mechanisms of instruments employed in a process industry.</li><li>Troubleshooting techniques and ability to analyse and resolve engineering problems independently.</li></ul>&nbsp;

Responsibilities: <ul><li>The Validation Engineer works alone and as part of the Engineering Department to author and execute IQ/OQ/PQ protocols, engineering studies, facility qualifications and other documents related to production and business systems.</li><li>They will also be responsible for engineering and maintenance projects, such as repairs, upgrades or replacements as the need arises.</li><li>They will work with quality, technical operations and production to identify and resolve issues.&nbsp;</li><li>Adhere to all company and cGMP procedures as well as applicable safety regulations.</li><li>Author change controls, SOPs and protocols.</li><li>Protocols o Generates and executes validation protocols, and summarizes studies to ensure compliance with manufacturer and SPI specifications, with current Good Manufacturing Practices, and national standards.</li><li>Responsible for confirming all communicated validation plans to applicable management.</li><li>Provides technical assistance in the form of rationales or validation studies.</li><li>Responsible for effectively adopting modern validation techniques, current industry practices, risk management principles, science-based approaches and a strong understanding of processes and equipment.</li><li>Troubleshoots and resolves issues as needed.</li><li>Manage multiple projects with competing deadlines.</li><li>Manage external resources to complete tasks outside SPI’s capabilities.&nbsp;</li><li>Manage approvers of documents and procedures and ensure timely closure of tasks.</li><li>Manage project-related Change Requests form initiation through closure, including presentation to Change Control Committee.</li><li>Assist with deviation investigation and identify areas for CAPAs as needed based on root causes.</li><li>Source and procure equipment, supplies and other materials as needed.</li><li>Develop and maintain cross-functional relationships.&nbsp;</li></ul> Requirements: <ul><li>Bachelor of Science in Engineering or Science discipline preferred.</li><li>Experience in pharmaceutical (i.e. Validation/QA or R&amp;D), medical device, biotechnology industries.</li><li>In-depth knowledge of the pharmaceutical plant operations is an asset.</li><li>Proficient in Microsoft Word, Excel, Power Point, Project, AutoCAD and other software relevant to the performance of the Job</li><li>Experience authoring change controls in Trackwise or other management system.</li><li>Experience authoring SOPs in MasterControl or other management system.</li><li>Integrity – Works with integrity and ethically; Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality.</li><li>Collaboration – Works well in group problem solving situations; Speaks clearly and persuasively in positive or negative situations; listens and gets clarification; Responds well to questions.&nbsp;</li><li>People – Treats people with respect; Keeps commitments; inspires the trust of others; Demonstrates knowledge of EEO policy; Shows respect and sensitivity for cultural differences; promotes a harassment-free environment.</li><li>Responsive – Identifies and adapts to priority issues as they arise; Communicates with management and team members effectively; Works quickly and efficiently.</li><li>Proactive – Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions.</li><li>Organized – Tracks deadlines and adheres to schedules; Writes clearly and informatively; Presents numerical data effectively.</li><li>Learning Mindset – Adapts to unfamiliar situations as needed; Open to new ideas and methods; Readily familiarizes self with new equipment and processes.</li><li>Regularly lift and /or move up to 10 pounds and occasionally lift and/or move up to 50 pounds.</li><li>Climb ladders and work in high, precarious places up to elevations of 75 feet.</li><li>Regularly exposed to work near moving mechanical parts.</li><li>Exposed to wet or humid conditions.</li><li>Exposed to outdoor weather conditions.</li><li>Regularly exposed to high noise environments.</li><li>Exposed to extremely dusty environments.</li><li>Exposed to chemicals used in the manufacturing process.</li></ul>

Responsibilities: <ul><li>Defines design requirements and hardware specifications based on customer or user requirements.</li><li>Contributes to the development and documentation of electronic system architectures.</li><li>Lead the creation of designs of analog and digital electronic circuit schematics for microcontroller based systems, meeting performance objectives.</li><li>Analyzes circuits using calculation and simulation methods to assess performance limits, effects of environmental and load stresses, and timing interfaces to ensure consistent performance in safety critical applications.&nbsp;</li><li>Good knowledge on Power Integrity, Power Sequencing, LTSpice, Pspice.</li><li>Ensures successful integration of electrical design with mechanical and software elements of the system.</li><li>Completes deliverables related to design of systems and sub-systems of the overall electrical architecture.</li><li>designing product with multiple power sources like AC/DC, DC/DC, Battery Pack, AA Battery.</li><li>Develops, modifies, and approves electrical design documentation, specifications, and drawings.</li><li>Supervises/coordinates an engineer and/or technician on assigned work</li><li>Defines appropriate test methods to verify designs meet their performance requirements.</li><li>Directs the layout of circuit assemblies to meet emissions and immunity performance requirements and design for manufacturability guidelines.</li><li>Transitions products to manufacturing and ensures robust products and manufacturing processes.</li><li>Develops and maintains an effective and corroborative working relationship with internal and external development partners.</li><li>Resolves competing constraints between interrelated functions (engineering, purchasing, manufacturing, regulatory, marketing, etc.) required to deliver the product to market.</li><li>Executes protocols and testing required to validate the safety and effectiveness of the design(s).</li><li>Leads the troubleshooting and problem-solving efforts related to electrical aspects of devices and associated systems.</li><li>Creates and communicates design/test plans, tasks, deliverables and status.&nbsp;</li><li>Manages time and resources tomeet committed schedule milestones.&nbsp;</li></ul> Requirements: <ul><li>A demonstrated track record in electromechanical hardware development, preferably medical devices or other highly regulated products such as military hardware.</li><li>Knowledge and experience in design of embedded microcontroller-based electronics products.&nbsp;</li><li>Knowledge of FPGA-based controller design and implementation is an added advantage.</li><li>Experience testing of electronics components/devices to meet Safety regulatory requirements e.g. Immunity, emission, partial discharge etc.</li><li>Knowledge and experience using CAD systems for printed circuit board schematic design and layout (Altium Designer, preferred), Matlab and data acquisition software (LabVIEW)</li><li>Good knowledge of standards such as IEC 60601, IEC 61010, UL, ANSI, AIM and ASTM.</li><li>Specific experience in design and development of sensing subsystems is highly desirable.</li><li>Good experience in designing product with multiple power sources like AC/DC, DC/DC, LithiumIon Battery Pack, AA Battery is highly desirable.&nbsp;</li><li>Graduate or Post Graduate in Electrical or Electronics or related Engineering and 11 to13 years of experience.&nbsp;</li><li>Prior experience in infusion pump domain is a plus</li></ul>

Responsibilities:&nbsp; <ul><li>Lead the development of DBSPs and associated project team comprised of specialist from different disciplines.</li><li>Conduct techno-economic studies to establish project business case and economic viability.</li><li>Develop feasible and optimized alternatives for electrical power systems associated with projects.</li><li>Review execution contractors for capital projects electrical engineering activities and provide guidance to carry out electrical activities such as power system studies, equipment specifications and selection.</li><li>Mentor junior and intermediate electrical engineers through the development of specific training programs tailored to their needs.</li></ul> Requirements:&nbsp; <ul><li>Bachelor degree in Electrical engineering, Power or Electrical Machines Engineering. Advanced degree is preferred.</li><li>Licensed Professional Electrical Engineer is preferred.</li><li>Fifteen years of experience in electrical engineering, design, commissioning &amp; start-up for major international Energy Companies or Consulting/EPC firms specialized in power generation, T &amp; D systems, oil and gas and petrochemical fields.</li><li>Participated in projects involving design and commissioning of EHV/HV equipment, GIS substations, power transformer systems, generation systems, renewable power systems, plant &amp; utility electrical distribution systems and critical AC/DC systems.</li><li>Experienced in using power system analysis software ETAP.</li><li>Experienced in Thermoflow (or equivalent) thermal engineering software for Cogeneration plants.</li><li>Experienced in engineering practices and economic principles.</li><li>Knowledge of IEC or U.S. Codes, Standards and Specifications.</li></ul>

Skills

Industry

Location

Jobtitle

401 power systems reliability asset integrity engineer Jobs found

Power Systems Reliability & Asset Integrity Engineer

Power Systems Asset Integrity Engineer

Asset Integrity Engineer

Electrical Engineer

Facilities Engineer

Digital Plant Solution Architect

Instrument & Electrical Reliability Engineer

Validation Engineer

Principal Engineer

Automation & Power Facilities Planning Engineer (Electrical Planning)

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

401 power systems reliability asset integrity engineer Jobs found

Power Systems Reliability & Asset Integrity Engineer

Power Systems Asset Integrity Engineer

Asset Integrity Engineer

Electrical Engineer

Facilities Engineer

Digital Plant Solution Architect

Instrument & Electrical Reliability Engineer

Validation Engineer

Principal Engineer

Automation & Power Facilities Planning Engineer (Electrical Planning)

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.