Principal / Sr. Battery Management System Engineer

Electrical Engineer

Principal Engineer

Sr. Principal Engineer

Principal Engineer- Risk Management

Principal Process Engineer

Role Description: <ul><li>You will lead the development of creative solutions to challenging problems associated with the design of our new and existing infusion system product portfolio.&nbsp;</li><li>The successful candidate will possess strong technical capabilities, an excitement and energy for product development, and a passion for their work and the impact it has on saving and sustaining the lives of patients.</li></ul> Responsibilities: <ul><li>Defines design requirements and hardware specifications based on customer or user requirements.</li><li>Strong experience in energy storage devices especially Li-ion batteries.</li><li>Expert in Battery Management System (BMS)design and/or utilization.</li><li>Deep understanding of BMS algorithms like SOC &amp; SOH, cell aging prediction models, storage compensation algorithms, accurate predictions of run time remaining by developing algorithms to account for factors for storage, fuel gauge tolerances, partial cycles, cell balance etc.</li><li>Experience in developing and analyzing battery charger circuits using calculation and simulation methods to assess and optimize performance, effects of environmental and load stresses, to ensure consistent performance in safety critical applications. Good knowledge on Power Integrity, Power budgeting, LTSpice, Pspice.</li><li>Experience in Matlab or other programming language for data analysis is a plus.</li><li>Develops, modifies, and approves electrical design documentation, specifications, and drawings.</li><li>Supervises/coordinates an engineer and/or technician on assigned work</li><li>Defines appropriate test methods to verify designs meet their performance requirements.</li><li>Transitions products to manufacturing and ensures robust products and manufacturing processes.</li><li>Develops and maintains an effective and corroborative working relationship with internal and external development partners.</li><li>Resolves competing constraints between interrelated functions (engineering, purchasing, manufacturing, regulatory, marketing, etc.) required to deliver the product to market.</li><li>Executes protocols and testing required to validate the safety and effectiveness of the design(s).</li><li>Creates and communicates design/test plans, tasks, deliverables, and status. Manages time and resources to meet committed schedule milestones.</li></ul> Requirements: <ul><li>A demonstrated track record in electromechanical hardware development, preferably medical devices, or other highly regulated products such as military hardware.</li><li>Expert in Battery Management System.</li><li>Good to have knowledge and experience in digital and analog design.</li><li>Knowledge of standards such as IEC 60601, IEC 61010, UL, ANSI and ASTM.</li><li>Graduate or Postgraduate in Electrical or Electronics or related Engineering and 11 to13 years of experience. Prior experience in infusion pump domain is a plus.</li></ul>

Role Description: <ul><li>Our client is seeking an Electrical Engineer to join our Unconventional Resources Operations Department (UROD).</li><li>The UROD is responsible for operating all the surface facilities, which include the field wells and processing facilities.</li><li>Your primary role as an Electrical Engineer in an unconventional asset will be to provide professional advice and guidance regarding electrical systems, schemes, equipment or techniques, facility designs and solutions to operating and maintenance problems.&nbsp;</li><li>You will have a thorough understanding of plant operations, specialized experience in electrical high voltage and low voltage systems for large scale complex electrical distribution system.&nbsp;</li><li>In addition, you will have experience in power reliability analysis for electrical distribution systems which involves carrying out power system studies using software like ETAP etc.</li></ul> Responsibilities: <ul><li>As the successful candidate you will be required to perform the following:</li><li>Provide day-to-day technical support to Operations and Maintenance Units to troubleshoot and fix electrical systems including reporting and documentation.</li><li>Provide expert advice and assistance to design, construction, maintenance engineers and operation personnel on all matters related to electrical systems.</li><li>Develop engineering conceptual plans for the new installation and upgrade projects including development of work scopes, calculations and detailed technical specifications.</li><li>Review Project Proposals and Detailed Designs packages for new facilities.</li><li>Develop and maintain the UR engineering standards and design best practices.</li><li>Participate on the testing &amp; commissioning of the new facilities and Turnaround and Inspection (T&amp;I).</li><li>Update and maintain engineering documentation and drawings.</li><li>Analyze system performance and find solution for Energy saving.</li><li>Ensure quality, cost effective and timely solutions to any upgrade.</li><li>Test and pilot new technologies.</li><li>Ensure full HSE Compliance.</li><li>Report and analyze key performance indices.</li><li>Make recommendations for technical/economic optimization of existing facilities.</li><li>Lead feasibility/profitability studies for new facilities.</li><li>Contribute to Business Unit strategy.</li><li>Assists in the training, development and mentoring of younger staff.</li><li>Provide analysis, evaluation and interpretation in support of projects, processes, and financing related to our clients capital investment decisions.</li><li>Maintain and expand on contacts within the industry.</li><li>Regularly interact with other professionals in various company organizations involved in capital planning and economic analysis.</li></ul> Requirements: <ul><li>You must hold a Bachelors Degree in Electrical Engineering from an accredited university.&nbsp;</li><li>A higher degree is preferred.</li><li>A Professional Engineer (P.E.) registration is desirable but is not essential.</li><li>You should have a minimum of 15 years working experience in Electrical engineering, with at least 10 years’ experience in the field of Oil and Gas Industry.</li><li>You must be conversant and have working knowledge of industry codes and standards, such as NFPA, ANSI IEEE, IEC, API, NEC, NACE and others.</li><li>Experience with specifications and data sheets for Electrical equipment like EHV GIS/AIS Switchgear, Power</li><li>Transformers, large synchronous/induction motors, HV/LV Switchgears and Control gears, EHV/HV/LV Cables,Bus ducts, EHV GIBs, UPS, Battery Charger, NGR, Panel boards is a requirement.</li><li>You should also have experience in preparation of Single line diagrams, protection and metering schemes, motor schematics, Hazardous area classification drawings, substation automation architecture, synchronizing and bus changeover schemes.</li><li>Experience in electrical engineering calculations like Grounding/Earthing, Battery charger/Battery sizing,</li><li>Transformer sizing, Cable sizing, Electrical Load schedules, Lighting.&nbsp;</li><li>Also knowledge of Electrical Power system studies including Short Circuit, Load Flow analysis, Motor starting, Arc Flash Hazard studies,</li><li>Relay coordination and setting using software like ETAP is essential.</li><li>You must also demonstrate the ability to work with design contractors to review contractor design packages, provide input to FEED packages, introduce new technology to enhance company productivity, suggest innovative solutions to optimize equipment performance, demonstrate safe working practices.&nbsp;</li><li>Be able to conduct failure analysis and provide recommendations for failed electrical equipment.&nbsp;</li><li>Experience with electrical equipment field Installation, Commissioning and testing as well as in Electrical Equipment layouts, plant cable routing layouts, lighting and grounding layouts is preferred.</li><li>You should be able to communicate with multidiscipline engineers to complete projects.</li><li>Have proven ability to communicate effectively with management at all levels within the organization.</li><li>Strong written and oral communication skills are also essential to be able to communicate what are frequently complex technical, economic and commercial concepts in a clear and succinct manner to individuals and groups from diverse professional backgrounds.</li><li>You must be able to work effectively with the minimum of supervision on relatively unstructured tasks.&nbsp;</li><li>You must be willing to work in remote areas depending on the project or task assignments.</li></ul>

Responsibilities: <ul><li>Defines design requirements and hardware specifications based on customer or user requirements.</li><li>Contributes to the development and documentation of electronic system architectures.</li><li>Lead the creation of designs of analog and digital electronic circuit schematics for microcontroller based systems, meeting performance objectives.</li><li>Analyzes circuits using calculation and simulation methods to assess performance limits, effects of environmental and load stresses, and timing interfaces to ensure consistent performance in safety critical applications.&nbsp;</li><li>Good knowledge on Power Integrity, Power Sequencing, LTSpice, Pspice.</li><li>Ensures successful integration of electrical design with mechanical and software elements of the system.</li><li>Completes deliverables related to design of systems and sub-systems of the overall electrical architecture.</li><li>designing product with multiple power sources like AC/DC, DC/DC, Battery Pack, AA Battery.</li><li>Develops, modifies, and approves electrical design documentation, specifications, and drawings.</li><li>Supervises/coordinates an engineer and/or technician on assigned work</li><li>Defines appropriate test methods to verify designs meet their performance requirements.</li><li>Directs the layout of circuit assemblies to meet emissions and immunity performance requirements and design for manufacturability guidelines.</li><li>Transitions products to manufacturing and ensures robust products and manufacturing processes.</li><li>Develops and maintains an effective and corroborative working relationship with internal and external development partners.</li><li>Resolves competing constraints between interrelated functions (engineering, purchasing, manufacturing, regulatory, marketing, etc.) required to deliver the product to market.</li><li>Executes protocols and testing required to validate the safety and effectiveness of the design(s).</li><li>Leads the troubleshooting and problem-solving efforts related to electrical aspects of devices and associated systems.</li><li>Creates and communicates design/test plans, tasks, deliverables and status.&nbsp;</li><li>Manages time and resources tomeet committed schedule milestones.&nbsp;</li></ul> Requirements: <ul><li>A demonstrated track record in electromechanical hardware development, preferably medical devices or other highly regulated products such as military hardware.</li><li>Knowledge and experience in design of embedded microcontroller-based electronics products.&nbsp;</li><li>Knowledge of FPGA-based controller design and implementation is an added advantage.</li><li>Experience testing of electronics components/devices to meet Safety regulatory requirements e.g. Immunity, emission, partial discharge etc.</li><li>Knowledge and experience using CAD systems for printed circuit board schematic design and layout (Altium Designer, preferred), Matlab and data acquisition software (LabVIEW)</li><li>Good knowledge of standards such as IEC 60601, IEC 61010, UL, ANSI, AIM and ASTM.</li><li>Specific experience in design and development of sensing subsystems is highly desirable.</li><li>Good experience in designing product with multiple power sources like AC/DC, DC/DC, LithiumIon Battery Pack, AA Battery is highly desirable.&nbsp;</li><li>Graduate or Post Graduate in Electrical or Electronics or related Engineering and 11 to13 years of experience.&nbsp;</li><li>Prior experience in infusion pump domain is a plus</li></ul>

Responsibilities: <ul><li>Provide day-to-day technical support to Operations and Maintenance Units to troubleshoot and fix electrical systems including reporting and documentation.</li><li>Provide expert advice and assistance to design, construction, maintenance engineers and operation personnel on all matters related to electrical systems.</li><li>Develop engineering conceptual plans for the new installation and upgrade projects including development of work scopes, calculations and detailed technical specifications.</li><li>Review Project Proposals and Detailed Designs packages for new facilities.</li><li>Develop and maintain the UR engineering standards and design best practices.</li><li>Participate on the testing &amp; commissioning of the new facilities and Turnaround and Inspection (T&amp;I).</li><li>Update and maintain engineering documentation and drawings.</li><li>Analyze system performance and find solution for Energy saving.</li><li>Ensure quality, cost effective and timely solutions to any upgrade.</li><li>Report and analyze key performance indices.</li><li>Make recommendations for technical/economic optimization of existing facilities.</li><li>Assists in the training, development and mentoring of younger staff.</li><li>Provide analysis, evaluation and interpretation in support of projects, processes, and financing related to capital investment decisions.</li><li>Regularly interact with other professionals in various company organizations involved in capital planning and economic analysis.</li></ul> Requirements: <ul><li>Bachelors Degree in Electrical Engineering from an accredited university. A higher degree is preferred. A Professional Engineer (P.E.) registration is desirable but is not essential.</li><li>Minimum of 15 years working experience in Electrical engineering, with at knowledge and experience in the field of Oil and Gas Industry.</li><li>You must be conversant and have working knowledge of industry codes and standards, such as NFPA, ANSI IEEE, IEC, API, NEC, NACE and others.</li><li>Experience with specifications and data sheets for Electrical equipment like EHV GIS/AIS Switchgear, Power Transformers, large synchronous/induction motors, HV/LV Switchgears and Control gears, EHV/HV/LV Cables, Bus ducts, EHV GIBs, UPS, Battery Charger, NGR, Panel boards is a requirement.</li><li>You should also have experience in preparation of Single line diagrams, protection and metering schemes, motor schematics, Hazardous area classification drawings, substation automation architecture, synchronizing and bus changeover schemes.</li><li>Experience in electrical engineering calculations like Grounding/Earthing, Battery charger/Battery sizing, Transformer sizing, Cable sizing, Electrical Load schedules, Lighting. Also knowledge of Electrical Power system studies including Short Circuit, Load Flow analysis, Motor starting, Arc Flash Hazard studies, Relay coordination and setting using software like ETAP is essential.</li><li>You must also demonstrate the ability to work with design contractors to review contractor design packages, provide input to FEED packages, introduce new technology to enhance company productivity, suggest innovative solutions to optimize equipment performance, demonstrate safe working practices.</li><li>Be able to conduct failure analysis and provide recommendations for failed electrical equipment. Experience with electrical equipment field Installation, Commissioning and testing as well as in Electrical Equipment layouts, plant cable routing layouts, lighting and grounding layouts is preferred.</li><li>You should be able to communicate with multidiscipline engineers to complete projects.</li><li>Have proven ability to communicate effectively with strong written and oral communication skills.</li><li>You must be willing to work in remote areas depending on the project or task assignments.</li></ul>

Responsibilities: <ul><li>Provide day-to-day technical support to Operations and Maintenance Units to troubleshoot and fix electrical systems including reporting and documentation.</li><li>Provide expert advice and assistance to design, construction, maintenance engineers, and operation personnel on all matters related to electrical systems.</li><li>Develop engineering conceptual plans for the new installation and upgrade projects including the development of work scopes, calculations, and detailed technical specifications.</li><li>Review Project Proposals and Detailed Design packages for new facilities.</li><li>Develop and maintain the UR engineering standards and design best practices.</li><li>Participate in the testing &amp; commissioning of the new facilities and Turnaround and Inspection (T&amp;I).</li><li>Update and maintain engineering documentation and drawings.</li><li>Analyze system performance and find solutions for Energy saving.</li><li>Ensure quality, cost-effective and timely solutions to any upgrade.</li><li>Report and analyze key performance indices.</li><li>Make recommendations for technical/economic optimization of existing facilities.</li><li>Assists in the training, development, and mentoring of younger staff.</li><li>Provide analysis, evaluation, and interpretation in support of projects, processes, and financing related to capital investment decisions.</li><li>Regularly interact with other professionals in various company organizations involved in capital planning and economic analysis.</li></ul> Requirements: <ul><li>Bachelor’s degree in electrical engineering from an accredited university. A higher degree is preferred. A Professional Engineer (P.E.) registration is desirable but is not essential.</li><li>Minimum of 15 years of working experience in Electrical engineering, with knowledge and experience in the field of Oil and Gas Industry.</li><li>You must be conversant and have a working knowledge of industry codes and standards, such as NFPA, ANSI IEEE, IEC, API, NEC, NACE, and others.</li><li>Experience with specifications and data sheets for Electrical equipment like EHV GIS/AIS Switchgear, Power Transformers, large synchronous/induction motors, HV/LV switchgear and Control gears, EHV/HV/LV Cables, Bus ducts, EHV GIBs, UPS, Battery Charger, NGR, Panel boards is a requirement.</li><li>You should also have experience in preparing Single line diagrams, protection and metering schemes, motor schematics, Hazardous area classification drawings, substation automation architecture, synchronizing, and bus changeover schemes.</li><li>Experience in electrical engineering calculations like Grounding/Earthing, Battery charger/Battery sizing, Transformer sizing, Cable sizing, Electrical Load schedules, and Lighting. Also, knowledge of Electrical Power system studies including Short Circuit, Load Flow analysis, Motor starting, Arc Flash Hazard studies, Relay coordination, and setting using software like ETAP is essential.</li><li>You must also demonstrate the ability to work with design contractors to review contractor design packages, provide input to FEED packages, introduce new technology to enhance company productivity, suggest innovative solutions to optimize equipment performance and demonstrate safe working practices.</li><li>Be able to conduct failure analysis and provide recommendations for failed electrical equipment. Experience with electrical equipment field Installation, Commissioning, and testing as well as in Electrical Equipment layouts, plant cable routing layouts, lighting, and grounding layouts is preferred.</li><li>You should be able to communicate with multidiscipline engineers to complete projects.</li><li>Have proven ability to communicate effectively with strong written and oral communication skills.</li><li>You must be willing to work in remote areas depending on the project or task assignments.</li></ul>

Responsibilities: <ul><li>Defines design requirements and hardware specifications based on customer or user requirements.</li><li>Contributes to the development and documentation of electronic system architectures.</li><li>Creates designs of analog and digital electronic circuit schematics for microcontroller-based systems, meeting performance objectives.</li><li>Analyze circuits using calculation and simulation methods to assess performance limits, effects of environmental and load stresses, and timing interfaces to ensure consistent performance in safety critical applications.</li><li>Ensures successful integration of electrical design with mechanical and software elements of the system.</li><li>Completes deliverables related to design of systems and sub-systems of the overall electrical architecture.</li><li>Develops, modifies, and approves electrical design documentation, specifications, and drawings.</li><li>Supervises/coordinates engineers and/or technicians assigned to execute the project.</li><li>Defines appropriate test methods to verify designs meet their performance requirements.</li><li>Mentor the layout of circuit assemblies to meet emissions and immunity performance requirements and design for manufacturability guidelines.</li><li>Implements data acquisition and analysis techniques to characterize design performance</li><li>Executes protocols and testing required to validate the safety and effectiveness of the design(s).</li><li>Leads the troubleshooting and problem-solving efforts related to electrical aspects of devices and associated systems.</li><li>Creates and communicates design/test plans, tasks, deliverables, and status.&nbsp;</li><li>Manages time and resources to meet committed schedule milestones.</li></ul> Requirements: <ul><li>Graduate or Postgraduate in Electrical or Electronics or related Engineering and 15+ years of experience.</li><li>Prior experience in infusion pump domain is a plus.</li><li>A demonstrated track record in electromechanical hardware development, preferably medical devices or other highly regulated products such as military hardware.&nbsp;</li><li>Knowledge and experience in design of embedded microcontroller-based electronics products.</li><li>Knowledge of FPGA-based controller design and implementation is an added advantage.</li><li>Experience testing of electronics components/devices to meet Safety regulatory requirements e.g. Immunity, emission, partial discharge etc.</li><li>Knowledge and experience using CAD systems for printed circuit board schematic design and layout (Altium Designer, preferred), Matlab and data acquisition software (LabVIEW)</li><li>Good knowledge of standards such as IEC 60601, IEC 61010, UL, ANSI, AIM and ASTM.</li><li>Specific experience in design and development of sensing subsystems is highly desirable</li></ul>

Responsibilities: <ul><li>Provide day-to-day technical support to Operations and Maintenance Units to troubleshoot and fix electrical systems including reporting and documentation.</li><li>Provide expert advice and assistance to design, construction, maintenance engineers and operation personnelon all matters related to electrical systems.</li><li>Develop engineering conceptual plans for the new installation and upgrade projects including development of work scopes, calculations and detailed technical specifications.</li><li>Review Project Proposals and Detailed Designs packages for new facilities.</li><li>Develop and maintain the UR engineering standards and design best practices.</li><li>Participate on the testing &amp; commissioning of the new facilities and Turnaround and Inspection (T&amp;I).</li><li>Update and maintain engineering documentation and drawings.</li><li>Analyze system performance and find solution for Energy saving.</li><li>Ensure quality, cost effective and timely solutions to any upgrade.</li><li>Make recommendations for technical/economic optimization of existing facilities.</li><li>Lead feasibility/profitability studies for new facilities.</li><li>Provide analysis, evaluation and interpretation in support of projects, processes, and financing related to the Company capital investment decisions.</li><li>Maintain and expand on contacts within the industry.</li><li>Regularly interact with other professionals in various company organizations involved in capital planning and economic analysis.</li></ul> Requirements: <ul><li>You must hold a Bachelors Degree in Electrical Engineering from an accredited university. A higher degree is preferred.</li><li>A Professional Engineer (P.E.) registration is desirable but is not essential.</li><li>You should have a minimum of 15 years working experience in Electrical engineering, with at least 10 years’</li><li>experience in the field of Oil and Gas Industry.</li><li>Knowledge of industry codes and standards, such as NFPA, ANSI IEEE,IEC, API, NEC, NACE and others.</li><li>Experience with specifications and data sheets for Electrical equipment like EHV GIS/AIS Switchgear, Power Transformers, large synchronous/induction motors, HV/LV Switchgears and Control gears, EHV/HV/LV Cables, Bus ducts, EHV GIBs, UPS, Battery Charger, NGR, Panel boards is a requirement.</li><li>You should also have experience in preparation of Single line diagrams, protection and metering schemes, motor schematics, Hazardous area classification drawings, substation automation architecture, synchronizing and bus changeover schemes.</li><li>Experience in electrical engineering calculations like Grounding/Earthing, Battery charger/Battery sizing, Transformer sizing, Cable sizing, Electrical Load schedules, Lighting. Also knowledge of Electrical Power system studies including Short Circuit, Load Flow analysis, Motor starting, Arc Flash Hazard studies, Relay coordination and setting using software like ETAP is essential.</li><li>You must also demonstrate the ability to work with design contractors to review contractor design packages, provide input to FEED packages, introduce new technology to enhance company productivity, suggest innovative solutions to optimize equipment performance, demonstrate safe working practices.</li><li>Be able to conduct failure analysis and provide recommendations for failed electrical equipment.</li><li>Experience with electrical equipment field Installation, Commissioning and testing as well as in Electrical Equipment layouts, plant cable routing layouts, lighting and grounding layouts is preferred.</li><li>You should be able to communicate with multidiscipline engineers to complete projects.</li><li>Strong written and oral communication skills are also essential to be able to communicate what are frequently complex technical, economic and commercial concepts in a clear and succinct manner to individuals and groups from diverse professional backgrounds.</li><li>You must be willing to work in remote areas depending on the project or task assignments.</li></ul> Working Environment: <ul><li>Our high-performing employees are drawn by the challenging and rewarding professional, technical and industrial opportunities we offer, and are remunerated accordingly.</li><li>At the Company , our people work on truly world-scale projects, supported by investment in capital and technology that is second to none.</li><li>And because, as a global energy company, we are faced with addressing some of the world’s biggest technical, logistical and environmental challenges, we invest heavily in talent development.</li><li>We have a proud history of educating and training our workforce over many decades.</li><li>Employees at all levels are encouraged to improve their sector-specific knowledge and competencies through our workforce development programs – one of the largest in the world.</li></ul>

Role Description: <ul><li>Apply a solid understanding of System Engineering practices and theories/practices in Risk Management towards the development of new or enhanced Software products or processes.</li><li>Support the advancement of Risk and Reliability competencies and execution across the Device Systems Software Engineering organization.</li></ul> Responsibilities: <ul><li>Responsible for leading the activities associated with the Risk Management of products in various stages of the product lifecycle from new product development to post-market surveillance.</li><li>Provides ongoing risk analysis and identification of required risk mitigations to ensure a safe, effective product.</li><li>Responsible for identifying risks and helping define requirements and verification &amp; validation testing to mitigate risk</li><li>Drive completion of Risk Management activities towards design transfer and successful commercialization of new products.</li><li>Provides leadership and subject matter expertise to product development teams to ensure Risk Management principles are applied throughout the development cycle.</li><li>Creates and approves Design History File deliverables associated with Risk Management.</li><li>Assesses and improves the Risk Management process.</li><li>Facilitate an improved understanding of the interrelationship between Risk and Reliability.</li><li>Expedite, manage, and coordinate interrelated Risk Management activities across functions, within the constraints of human and financial resources and changing priorities.</li><li>Participate in identifying and planning tasks, activities, and resourcing needs related to Risk Management.</li><li>Collaborates with Engineering, Manufacturing, and Service organizations in the development of design FMEA, Process FMEAs, and roll-up into Risk Management files. Working knowledge of FMEAs and standards applicable to Reliability Engineering (e.g. IEC 60812).</li><li>Recognizes strategy, evaluates risks, recommends actions, and develops contingencies to address various scenarios.&nbsp;</li><li>Able to analyze risk/tradeoffs and make recommendations of the appropriate path forward.</li><li>Motivates and successfully influences stakeholders and cross-functional team members within the project</li></ul> Requirements: <ul><li>Graduate or Postgraduate in Electrical or Electronics or related Engineering and 10+ years of experience.&nbsp;</li><li>Prior experience in Risk Management, Reliability&nbsp;</li></ul>

Responsibilities: <ul><li>Developing the process designs used in our bio-based processes.</li><li>Work on projects (from Conceptual through to Detail engineering), construction and commissioning of new or modified production facilities.</li><li>The projects you work on can be end of life replacement of equipment, line extensions or new facilities replacement, design of unit operations, etc.</li><li>The engineering team works with third party engineering consultancies/vendors for big projects so the Principal Process engineer operates as a lead during these projects.</li><li>Drive and facilitate decision making and guide these third party engineers in the efforts to completion of the design.&nbsp;</li></ul> Requirements: <ul><li>At least 10 years of equivalent and relevant experience as a process engineer in similar industries, at least partly in an international setting.</li><li>Experienced in working in multi-disciplinary project teams in a multi-cultural setting.</li><li>Awareness of the cost aspects within CAPEX projects.</li></ul>

Responsibilities: <ul><li>Define the infrastructure and the software architecture for multiple platforms including switches, firewalls, routers and edge processing products</li><li>Develop platform software and collaborate across engineering groups to maximize the use of common emerging platform technologies, conventions and technological building blocks.</li><li>Collaborate with Product Management, Architects and Product Owners from various teams and Executive leaders to define the business and technical strategy</li><li>Collaborate with global engineering leads at various businesses to establish and drive adoption of conventions and innovation</li><li>This position has the growth potential to transition into a team lead and people leader position.</li></ul> Requirements: <ul><li>8+ years of experience in platform software development</li><li>5+ years of architecture, design, implementation, and/or support of highly distributed service-oriented architectures, having an architectural sense for ensuring availability, reliability, scalability and security</li><li>3+ years implementing containerization solutions using Docker or LXC containers</li><li>Familiarity with virtualization technologies such as Hyper-V, vSphere, and vCenter.</li><li>Experience using Kubernetes, Docker, or Rancher for microservices deployment.</li><li>Experience with IaC using Ansible or Terraform.</li><li>Experience building CI/CD pipelines. Devops and Devsecops, version control, and system testing with Gitlab and Jenkins.</li><li>Experience gaining insight from log files with Datadog, ElasticSearch, Prometheus, and Grafana.</li><li>Experience implementing systems tracing with Jaeger and Opentracing.</li><li>Familiarity with protocol level tracing with Wireshark.</li><li>Production experience with distributed datastore using zookeeper, cassandra, postgres, kafka, redis, and ElasticSearch.</li><li>Experienced with programming languages such as C, C++, Java, Python and Go.</li><li>Familiar with cloud platforms such as GCP, AWS, or Azure.</li><li>2 or more years building public APIs and ability to design and implement RESTful APIs.</li><li>Willingness to learn and teach complex technologies.</li><li>Voracious need to document code and catalog data transformations.</li></ul>

Skills

Industry

Location

Jobtitle

681 principal sr battery management system engineer Jobs found

Principal / Sr. Battery Management System Engineer

Electrical Engineer

Principal Engineer

Electrical Engineer

Electrical Engineer

Sr. Principal Engineer

Electrical Engineer

Principal Engineer- Risk Management

Principal Process Engineer

Principal Engineer

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

681 principal sr battery management system engineer Jobs found

Principal / Sr. Battery Management System Engineer

Electrical Engineer

Principal Engineer

Electrical Engineer

Electrical Engineer

Sr. Principal Engineer

Electrical Engineer

Principal Engineer- Risk Management

Principal Process Engineer

Principal Engineer

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.