Senior Scientist - Microbiology

Senior Engineer, Design Verification

Process Designer

Design Engineer

Design Lead

Design Quality

Process Engineer Hydroprocessing

Model Based System Engineering

Process Engineer - Utilities

Overview: <ul><li>As a Sr Scientist - Microbiology, you will lead microbiology science from product development to commercialization.</li><li>You will use scientific knowledge to assess and mitigate microbiological risks during the development of new substrates to ensure the delivery and quality of new materials, finished and semi-finished goods.</li><li>Moreover, you will work in collaboration with project teams, the designers, the assessment scientists, the quality departments, and the testing labs to:</li><li>promote innovation based on microbiology to develop new products</li><li>establish the microbial hazards analysis and define the critical control points</li><li>define the microbiological parameters for testing required during the lifecycle of new product launches</li><li>Apart from these, you will act as technical subject matter expert for microbiological characterization and testing of smoke-free products (SFP), identifying areas of improvement in the methods portfolio and developing new methods to upgrade these areas in collaboration with CROs and External Labs.</li></ul> Responsibilities: <ul><li>Lead the assessment of microbial hazards, coordinating related studies and subsequently defining microbiological testing inputs for the contamination control strategy and quality of SFP</li><li>Drive the microbiological characterization and testing of materials and, finished and semi-finished goods during the development, assessment, and manufacturing of SFP</li><li>Promote and assess new technologies based on microbiology science to develop new substrates</li><li>Identify and implement new methods and new technology for microbiological testing.&nbsp;</li><li>Establish, maintain, and update microbiology testing methods.&nbsp;</li><li>Issue reviews of analytical data and participate to surveillance of external labs.</li><li>Participate in the development and maintenance of internal standards for microbiology by assessing evolution of external regulatory environment in collaboration with Regulatory Standards department</li><li>Provide expertise, guidance and recommendations to Quality and Safety Surveillance departments for the management of product related special situations and during authority inspections of regulated products design and manufacturing</li></ul> Requirements:&nbsp;<ul><li>MSc in microbiology (food, ecology or other), preferably PhD</li><li>Min 10 years of experience in microbiology sciences applied in different fast-evolving, fast-to deliver, consumer centric and regulated consumer goods (e.g. food, beverages, cosmetics, health &amp; wellness) environments</li><li>Demonstrated expertise as SME in microbiological product characterization, ideally in an industrial setting, with hands-on experience in applying microbiology risk assessment, aseptic process design, contamination control and testing - from product design to commercialization</li><li>Sound knowledge and experience in microbiological testing and new technologies (e.g. RMM), preferably in a certified environment, e.g. ISO17025</li><li>Ability to lead projects and cross-functional teams in a Quality driven environment (QA, QC, QMS and processes), with successful development and adoption of internal standards / directives</li><li>Effective in communicating, presenting, training and influencing at all levels of the organization</li><li>Continuously improving product and process development, with tangible and impactful outputs</li><li>Extensive knowledge of the Tobacco industry and SFP and their development, testing and characterization is an asset</li><li>Proficient in English, both written and spoken</li></ul>

Responsibilities: <ul><li>Develop business justifications, scope, and resource requirements to support management reviews and decision-making processes.&nbsp;</li><li>Serve as the knowledgeable resource to bring projects to realization.</li><li>Review, evaluate, and handle extensive amounts of research and technical information, as well as existing documents.&nbsp;</li><li>Conduct knowledge management through data compilation, review, and storage, in accordance with the requirements of the company, FDA, or any other relevant accreditation authority.</li><li>Participate in development of strategies and activity plans that will improve engineering pipeline projects and capabilities for future needs.&nbsp;</li><li>Coordinate the delivery of technical activities among internal and external partners to fulfill the identified project scope and objectives, ultimately ensuring successful project closures.</li><li>Ensure compliance with the companys Compliance Policies, standards, and applicable laws related to the aforementioned activities.&nbsp;</li><li>Promote the integration of these policies among team members and implement suitable processes to safeguard the confidentiality of critical information.</li></ul> Requirements: <ul><li>Bachelor’s Degree in Engineering (Electrical, Electronics, Software or Mechanical Engineering) with a strong focus on embedded electronic systems.</li><li>5-10 years of experience, preferably in electronic design and/or product testing at both the module and consumer product levels.&nbsp;</li><li>Relevant industries may include consumer electronics product manufacturing, medical device manufacturing, scientific instrument manufacturing, automation products/services providers, or design consultancies.</li><li>Experience in project and budget management.</li><li>Proficiency in English is a must, and knowledge of Mandarin would be a plus.</li><li>Possesses an analytical mindset and can approach problems in a structured manner.&nbsp;</li><li>Strong skills in test planning and Design of Experiment (DoE).</li><li>Familiarity with device development and characterization processes is important.</li><li>Awareness and understanding of Design Failure Mode and Effect Analysis (DFMEA) processes.</li><li>Ability to develop testing methods and protocols.</li><li>Knowledge of industry test standards from IEC, IEEE, UL, ASTM and ISO.</li><li>Experience in failure investigation and root cause analysis (RCA) for consumer products.</li></ul>

Responsibilities: <ul><li>Digitize processes and applications in alignment with company Vision &amp; Strategy.</li><li>Improve company core processes by removing variations, inefficiencies and complexity.</li><li>Optimize and integrate them into a digitized, automated, harmonized and coherent process landscape.</li></ul> Requirements: <ul><li>5+ years of experience working in IT/Software Consulting.</li><li>3+ years of experience in Requirements Engineering.</li><li>3+ years of experience in agile PM.</li><li>2+ years of experience working with process modelling applications and in business process analysis,</li><li>Design, documentation, optimization and automation.</li><li>Background in Business Administration and/or Software Engineering</li></ul>

Responsibilities: <ul><li>Creates design packages to comply API spec Q1 and API product specification requirements.</li><li>To prepare drawings on solid Edge software.</li><li>Should be able to apply suitable standards and procedures in engineering activities.</li><li>To prepare and review design BOM, work instructions, forms, design calculations, list of standards, material specifications, design validation procedures, drawings, ITP, FAT, IOM, SAT, Purchase Specifications, list of design packages.</li><li>To review and verify design documentation.</li><li>Design &amp; Development of suitable Jigs/fixture for routinely produced items.</li><li>Reverse engineering of some of OEM Equipment’s.</li><li>To standardize engineering drawings, related engineering procedures.</li><li>Part modeling and drafting for product and/or components.</li><li>Reverse Engineering of product and/ or components involves measurement, modeling, drafting, analysis and assembly. Standardization process enforce by department to enrich existing process.</li><li>To prepare Material Construction Data Sheet (MCDS).</li><li>Supplier development for new area of product design requirement.</li><li>Actively participation &amp; effective utilization of training imparted to you.</li><li>User friendly with design software especially solid Edge.</li></ul> Requirements: <ul><li>Experience 3 to 4 Years </li><li>Education Bachelor degree / Diploma in mechanical engineering.</li></ul>

Responsibilities : <ul><li>Responsible for leading a mechanical design team and ensure the delivery of new designs from the concept stage to the development&nbsp;</li><li>Design subsystems by reasoning from first principles and applying fundamental concepts of engineering</li><li>Drive creative thinking, ensure customer needs are considered</li><li>Creates engineering design concept based on industrial design inputs.</li><li>Create CAD models, including part and assembly drawings, Bill of Materials (BOMs) to support manufacturing, testing and assembly</li><li>Verify the functional components with a thorough Design Verification Plan, applying statistical techniques and data analysis.</li><li>Collaborate with the development and validation team to ensure products meet the customer requirements.</li><li>Ensures design files and information are kept up to date, and stored in accordance with departmental procedure</li><li>Conduct technical reviews of requirements, specifications and designs.</li><li>Provides technical and engineering support for day-to-day activities related to product development and process improvements&nbsp;</li><li>Responsible for carrying out design change requests in a timely manner</li><li>Works closely with development team and other cross functional team to ensure flawless implementation of new products</li></ul> Requirements : <ul><li>Master/bachelor’s in Mechanical or Mechatronics engineering with 8 to 12 years of experience.</li><li>Ability to technically lead a team with a Domain Expertise in Mechanical Engineering</li><li>Ability to interpret industrial designs and convert them into engineering design. Good in converting surface models into engineered 3D parts.</li><li>Analytical, creative, and intellectual thinker</li><li>Ability to perform mechanical design calculations &amp; verify designs.</li><li>Familiarity with milestone based NPD process</li><li>Good Knowledge of Manufacturing processes like Sheet Metal &amp; Fabrication / Plastic / Machining, plating, and painting while designing.</li><li>Good knowledge, experience and awareness of materials used in the consumer goods industry would be added advantage.</li><li>Excellent command on, skills like Reliability, DFSS (Design for Six Sigma), Risk Analysis, DFMEA, DFM, DFA, DFS, GD &amp; T, Tolerance Stack up Analysis, etc.</li><li>Ability to communicate on different levels with good presentation skills.</li><li>Working knowledge of CAD and Simulation Tools like Creo / SolidWorks / Windchill / Ansys Classic / Ansys Workbench</li><li>Prior experience in working with water or air purification products would be an added advantage.</li></ul>

Responsibilities: <ul><li>To validate the form, shape and highlights.</li><li>Freeze gap and flush values.</li><li>Part by part Creation on EAAR.</li><li>Converge design to engineering.</li><li>Bench mark study &amp; proposals.</li><li>Finalise color, grain and texture with C&amp;M designer.&nbsp;</li><li>Draft angle analysis to achieve good aspect.</li><li>Discussion &amp; Negotiation with supplier, CDMM &amp; grainer for Digital grain mapping sign off.</li><li>Monitor &amp; delivery of project delivarables.</li><li>To validate shape / Volume / highlights on all class A physical parts based on Class A release.</li><li>Shape &amp; cavity validation (Plastic &amp; Metal).</li><li>Discuss with grainer for better texture reachability and aspect.</li><li>To validate physical grain mapping, Cavity validaiton &amp; provide Graining go ahead.</li><li>To validate Grain, Color, gloss &amp; aspect.</li><li>Seats validation</li><li>Vehicle Pre harmony &amp; harmony validation</li><li>Maintenance &amp; Calibration of masters</li><li>Calibration of Equipments</li><li>Bench mark study &amp; proposals.</li><li>Support for color homologation.</li></ul> Requirements: <ul><li>Good Eye vision and good knowledge of design execution.</li><li>Excellent skill on Catia, TC, Alias basic</li><li>Good Stamping, Tooling, Injection, painting &amp; Assy process knowledge.</li><li>Basic skill on A2mac, Benchmark software.</li><li>MS Office with Exctl. presentation skill</li><li>Exctl. communication skill with team and suppliers.</li><li>Good planning and organising skill.&nbsp;</li><li>Good problem solving skill.</li><li>Good Team work skill.</li><li>10+ Years relevant design background in automotive field.</li></ul>

Responsibilities: You will be required to perform the following: <ul><li>Execute capital projects according to the scope, schedule and budget.</li><li>Provide the technical input and review of the design, construction, pre-commissioning, commissioning and startup of facilities.</li><li>Address technical issues arising in all phases of the project development related to Hydroprocessing and associated facilities.</li><li>Responsibility for project development: engineering studies, licensors selection, technical bid reviews, preliminary engineering, detail designs, materials procurement, construction, pre-commissioning, handover, commissioning and startup.</li><li>Manage General Engineering Services (GES) design contractor activities during the development of Pre-FEED &amp; FEED, including definition of project work scope and schedule requirements.&nbsp;</li><li>Development of detailed estimate leading to funding appropriation and approval.</li><li>Be familiar with international procedures of Projects Phases, Engineering Phases, Bidding procedures, Procurement Processes, Construction Requirements and up to date Best Practices.</li><li>Full understanding of contract documents (inclusive of appendices, drawings and specifications), project execution plan, interface management, change management, construction sequencing, standards specifications and project schedule to support project manager and/or company representative in timely completion of projects.</li><li>Review and resolve day to day contractors’ activities related to assigned project (process) work during construction and ensure HSE compliance.</li><li>Participate in developing process deliverables such as, BFDs, PFDs, P&amp;IDs, H&amp;MB, data sheets, C&amp;E diagrams, HAZID, HAZOP, SIL, simulations, 3D modeling, energy optimization, startup plans, etc.</li><li>Perform change order scope definition, cost estimation and assist the Project Manager or Company representative in change management process.</li><li>Review weekly and monthly reports on the status and progress of the contracts, including project costs and schedule.&nbsp;</li><li>Attend project meetings e.g. progress, stakeholders, design review, plot plan, value improvement.</li><li>Review of project schedule, coordinate and monitor the assigned project progress and challenge below par performance of the contractor.</li><li>Review, coordinate, and monitor invoices (claimed vs actual physical progress checks) and contractor’s submittals.</li><li>Performs Project Reporting and implementation of company initiatives during project execution.</li><li>Review design/study process modifications to the facilities.</li><li>Provide routine process (design and construction) support to facilities such as Hydroprocessing and related facilities.</li><li>Develop and/or review testing and commissioning procedures for process equipment, especially Hydroprocessing facilities.</li><li>Be familiar with leading technology licensors/ Vendors, international standards and value improvement practices.</li><li>Uphold engineering ethics and maintain high standards of professional behavior and conduct.</li></ul> Requirements: <ul><li>Education: B.S. in Chemical Engineering and a higher degree is preferred.</li><li>Overall Experience: Fifteen (15) years of experience in the refining and petrochemical industries with a specialty in Hydroprocessing, such that the incumbent is clearly recognized as an expert in this field.</li><li>Field Experience: five (5) years of field experience including construction, pre-commissioning, commissioning, startup, and operation.</li><li>Language Requirements:Excellent English communication skills (verbal and written) and no second language is required.</li><li>Other: Must have Engineering Design &amp; Construction phase experience with a thorough knowledge of engineering practices and economic principles in the applicable International Codes, Standards and Specifications.</li><li>Other: Dynamic attitude toward project improvements and savings, PMP Certification is desirable but not mandatory.</li><li>Other: Flexible to work in multinational teams and mobilize to different locations including remote areas as needed.</li></ul>

Responsibilities: <ul><li>Responsible for leading a mechanical design team and ensure the delivery of new designs from the concept stage to the development&nbsp;</li><li>Design subsystems by reasoning from first principles and applying fundamental concepts of engineering</li><li>Drive creative thinking, ensure customer needs are considered</li><li>Creates engineering design concept based on industrial design inputs.</li><li>Create CAD models, including part and assembly drawings, Bill of Materials (BOMs) to support manufacturing, testing and assembly</li><li>Verify the functional components with a thorough Design Verification Plan, applying statistical techniques and data analysis.</li><li>Collaborate with the development and validation team to ensure products meet the customer requirements.</li><li>Ensures design files and information are kept up to date, and stored in accordance with departmental procedure</li><li>Conduct technical reviews of requirements, specifications and designs.</li><li>Provides technical and engineering support for day-to-day activities related to product development and process improvements&nbsp;</li><li>Responsible for carrying out design change requests in a timely manner</li><li>Works closely with development team and other cross functional team to ensure flawless implementation of new products</li></ul> Requirements: <ul><li>Master/bachelor’s in Mechanical or Mechatronics engineering with 8 to 12 years of experience.</li><li>Ability to technically lead a team with a Domain Expertise in Mechanical Engineering</li><li>Ability to interpret industrial designs and convert them into engineering design. Good in converting surface models into engineered 3D parts.</li><li>Analytical, creative, and intellectual thinker</li><li>Ability to perform mechanical design calculations &amp; verify designs.</li><li>Familiarity with milestone based NPD process</li><li>Good Knowledge of Manufacturing processes like Sheet Metal &amp; Fabrication / Plastic / Machining, plating, and painting while designing.</li><li>Good knowledge, experience and awareness of materials used in the consumer goods industry would be added advantage.</li><li>Excellent command on, skills like Reliability, DFSS (Design for Six Sigma), Risk Analysis, DFMEA, DFM, DFA, DFS, GD &amp; T, Tolerance Stack up Analysis, etc.</li><li>Ability to communicate on different levels with good presentation skills.</li><li>Working knowledge of CAD and Simulation Tools like Creo / SolidWorks / Windchill / Ansys Classic / Ansys Workbench</li><li>Prior experience in working with water or air purification products would be an added advantage.</li></ul>

Responsibilities: <ul><li>We are pioneers. We were the first to break the sound barrier and design the first functional jetpack.&nbsp;</li><li>We were aboard NASA’s first lunar mission and brought advanced tiltrotor systems to market. </li><li>Today, we are defining the future of on-demand mobility.</li><li>We are proud to be an iconic company with superb talent, rapidly creating novel and coveted vertical lift experiences.&nbsp;&nbsp;</li><li>The primary focus for our Product Cyber Security (PCS) team is to ensure our products are designed, built and maintainable for cyber resiliency and survivability.&nbsp;</li><li>This is accomplished through cross-functional integration throughout the product lifecycle and coordination with customers and regulators.&nbsp;&nbsp;</li><li>You will be a part of a PCS team, deployed to product programs, and engage with talented and innovative people across engineering disciplines.</li><li>This position offers a unique opportunity to create, manage and establish company standards for modeling in the complex field of Aviation Cybersecurity.</li><li>Duties may include but are not limited to serving as a MBSE SME and Modeler on the PCS team.</li><li>Derive and allocate aircraft cyber architecture design requirements, work with PCS team members to establish models for architectural cyber analysis and design implementation, including risk assessment and threat modeling.</li><li>Compliance driven programs require DoDI 8510.01/8500.01 Risk Management Framework (RMF) certification for military platforms, and will include threat management, mitigation, and implementation of all applicable controls.&nbsp;</li><li>Serve as the author and steward for various cyber models across engineering functions.</li><li>A day in the life: Engage in the flight controls, mission systems or avionics architecture development with the PCS team to capture and model cybersecurity requirements, features, verification criteria and analysis methods.</li><li>Take ownership to define cyber modeling best practices and achieve consensus with key stakeholders.</li><li>But more than anything, it’s about being open-minded and inquisitive about what’s possible to bring the most innovative ideas to life.</li><li>We rise to the challenge, push past obstacles to create new solutions to the hardest problems, and open doors to new experiences few dream possible.</li><li>Can’t be done? Count us in. From our founding as an aerospace innovator to our current position as a technology company that is redefining flight, we come to work every day to do things differently.</li></ul> Requirements: Basic Qualifications: <ul><li>Bachelor’s degree is required.&nbsp;</li><li>Prefer Systems Engineering, Computer Science or Cyber Security degree.</li><li>Minimum of two years of related experience in Model Based System Engineering (MBSE)</li><li>Creation and management of models to describe complex aircraft systems in SysML, AADL</li><li>Experience working with design teams to develop verification plans for each subsystem.</li><li>Creation of models for a variety of cybersecurity topics, including: Threats, Vulnerabilities, Mitigations, regulatory requirement tracing.</li><li>Demonstrated ability to work in a collaborative technical environment and capture design and cyber security technical trade-offs with Integrated Product Teams (IPTs) and throughout the organization.</li><li>Develop and communicate product cyber security requirements and model residual risk assessments in accordance with product cyber security policies and methods.</li><li>Strong logical, analytical, and communication skills.</li></ul> Roles: <ul><li>Model Based System Engineering (MBSE) through CAMEO.</li><li>Experience with Risk Managed Framework (RMF) and/or Joint Special Access Program (SAP) Implementation Guide (JSIG) requirements.</li><li>Experience and/or familiarity modeling cyber-related architectures: attack trees, tabletops, threat modeling, architectural design analysis, implementing cryptographic solutions, digital signing, software authenticity, root of trust systems, plus threat and vulnerability analysis.</li><li>Demonstrated ability to create plans, procedures, and briefing material(s) for program presentations to USG.</li></ul>

Responsibilities: <ul><li>Review and monitor the performances of existing Utilities through key performance indicators (KPIs) representing the optimum operability, profitability, reliability, and process safety.&nbsp;</li><li>Issue quarterly utilities performance benchmarking reports highlighting the KPIs, analysis, and performance improvement recommendations.</li><li>Monitor and support the facilities in implementing the recommendations and closing the gaps identified in the quarterly performance benchmarking reports.&nbsp;</li><li>Conduct benchmarking and best practices exchange workshops internally among Global Manufacturing facilities (wholly-owned and affiliates).</li><li>Provide on-demand remote and/or field technical advisory support to Global Manufacturing facilities on matters concerning the operation of Utilities which may include but not limited to process design, process troubleshooting, start-up and shutdown activities and capacity test runs.</li><li>Issue service report for every support activity provided highlighting the facilities need, actions taken, results, and lessons learned.</li><li>In collaboration with Global Manufacturing facilities engineers, propose cost optimization or process improvement initiatives focusing on ‘low-hanging fruits’ with no or minimal capital investment required, through operational adjustment or design modification.</li><li>Conduct internal assessments on Utilities using our partners engineering standard references.</li><li>Highlight any deviations or better standards applied by affiliates for endorsement to facility management or our partners Central Engineering.&nbsp;</li><li>Act as the overall coordinator for cascading and driving Global Manufacturing and Corporate programs for the Utilities in the operating facilities enabling their execution and effective monitoring.&nbsp;</li><li>Participate in Business Plan development and coordinate with stakeholders for any capital investments on assigned Utilities and support techno-economic evaluations.</li><li>Be aware of Utilities technology developments in the industry and endorse the evaluation and approval to Central Engineering to facilitate field deployment.</li><li>Support arrangement and facilitation of technical knowledge exchange workshops with major equipment suppliers for Utilities and Global Manufacturing facilities.</li><li>Participate in hazard operability (HAZOP) and safety integrity level (SIL) studies as required by Utility operating facilities.</li></ul> Requirements: <ul><li>You must hold a Bachelor’s degree in Chemical Engineering or related specialization.</li><li>You should have a minimum of 15 years total Utilities unit experience (process engineering and operations) with at least 10 years’ experience in handling utilities.</li><li>Exposure to major equipment suppliers / package units for Utilities is preferred.</li></ul> Working environment: <ul><li>Our Partners high-performing employees are drawn by the challenging and rewarding professional, technical, and industrial opportunities they offer, and are remunerated accordingly.</li><li>At our partner, their people work on truly world-scale projects, supported by investment in capital and technology that is second to none.</li><li>And because, as a global energy company, they are faced with addressing some of the world’s biggest technical, logistical, and environmental challenges, they invest heavily in talent development.</li><li>Our partner has a proud history of educating and training their workforce over many decades.</li><li>Employees at all levels are encouraged to improve their sector-specific knowledge and competencies through the workforce development program – one of the largest in the world.</li></ul> Other Information: <ul><li>Our partner occupies a unique position in the global energy industry.&nbsp;</li><li>They are the worlds largest producer of hydrocarbons (oil and gas), with the lowest upstream carbon intensity of any major producer.&nbsp;</li><li>With their significant investment in technology and infrastructure, they strive to maximize the value of the energy they produce for the world along with a commitment to enhance our partners value to society.</li><li>Headquartered in the Kingdom of Saudi Arabia, and with offices around the world, they combine market discipline with a generations’ spanning view of the future, born of their nine decades experience as responsible stewards of the Kingdom’s vast hydrocarbon resources.</li><li>This responsibility has driven our partner to deliver significant societal and economic benefits to not just the Kingdom, but also to a vast number of communities, economies, and countries that rely on the vital and reliable energy that they supply.</li></ul> Organization Overview:&nbsp; <ul><li>We are seeking a Downstream Process Engineer with experience in Utilities processes (GTGs, STGs, Desalinating water unit, Raw water unit, Power generation, Boilers, Cooling water, Demineralized Water, Boiler feedwater, Waste water treatment facilities and recovery, Nitrogen generation &amp; storage, flares, etc) to join our Global Manufacturing Excellence organization under the Downstream Global Manufacturing Support Department (GMSD).</li><li>GMSD’s technical team is a multi-disciplinary team provides the required high-quality technical support to GM operating facilities (Refineries, NGLF, and petrochemical plants) inside the Kingdom of Saudi Arabia &amp; across the globe.</li><li>Your primary role will be to provide process engineering and operations expertise to monitor, optimize, and drive performance improvement programs for Utilities, including remote and field technical advisory support and benchmarking of utilities. You will drive the performance improvement programs which enhance process safety, optimize manufacturing cost, and increase utilities reliability.</li></ul>

Skills

Industry

Location

Jobtitle

460 process design Jobs found

Senior Scientist - Microbiology

Senior Engineer, Design Verification

Process Designer

Design Engineer

Design Lead

Design Quality

Process Engineer Hydroprocessing

Design Lead

Model Based System Engineering

Process Engineer - Utilities

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

460 process design Jobs found

Senior Scientist - Microbiology

Senior Engineer, Design Verification

Process Designer

Design Engineer

Design Lead

Design Quality

Process Engineer Hydroprocessing

Design Lead

Model Based System Engineering

Process Engineer - Utilities

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.