Process Engineer - Utilities

Process Engineer - Utilities ( GM )

Mechanical Engineer

ASC - Process Engineer

Senior Process Engineer

Process Engineer

Technical Safety (Process Safety)

ASC - Technical Safety (Process Safety)

Responsibilities: <ul><li>Review and monitor the performances of existing Utilities through key performance indicators (KPIs) representing the optimum operability, profitability, reliability, and process safety.&nbsp;</li><li>Issue quarterly utilities performance benchmarking reports highlighting the KPIs, analysis, and performance improvement recommendations.</li><li>Monitor and support the facilities in implementing the recommendations and closing the gaps identified in the quarterly performance benchmarking reports.&nbsp;</li><li>Conduct benchmarking and best practices exchange workshops internally among Global Manufacturing facilities (wholly-owned and affiliates).</li><li>Provide on-demand remote and/or field technical advisory support to Global Manufacturing facilities on matters concerning the operation of Utilities which may include but not limited to process design, process troubleshooting, start-up and shutdown activities and capacity test runs.</li><li>Issue service report for every support activity provided highlighting the facilities need, actions taken, results, and lessons learned.</li><li>In collaboration with Global Manufacturing facilities engineers, propose cost optimization or process improvement initiatives focusing on ‘low-hanging fruits’ with no or minimal capital investment required, through operational adjustment or design modification.</li><li>Conduct internal assessments on Utilities using our partners engineering standard references.</li><li>Highlight any deviations or better standards applied by affiliates for endorsement to facility management or our partners Central Engineering.&nbsp;</li><li>Act as the overall coordinator for cascading and driving Global Manufacturing and Corporate programs for the Utilities in the operating facilities enabling their execution and effective monitoring.&nbsp;</li><li>Participate in Business Plan development and coordinate with stakeholders for any capital investments on assigned Utilities and support techno-economic evaluations.</li><li>Be aware of Utilities technology developments in the industry and endorse the evaluation and approval to Central Engineering to facilitate field deployment.</li><li>Support arrangement and facilitation of technical knowledge exchange workshops with major equipment suppliers for Utilities and Global Manufacturing facilities.</li><li>Participate in hazard operability (HAZOP) and safety integrity level (SIL) studies as required by Utility operating facilities.</li></ul> Requirements: <ul><li>You must hold a Bachelor’s degree in Chemical Engineering or related specialization.</li><li>You should have a minimum of 15 years total Utilities unit experience (process engineering and operations) with at least 10 years’ experience in handling utilities.</li><li>Exposure to major equipment suppliers / package units for Utilities is preferred.</li></ul> Working environment: <ul><li>Our Partners high-performing employees are drawn by the challenging and rewarding professional, technical, and industrial opportunities they offer, and are remunerated accordingly.</li><li>At our partner, their people work on truly world-scale projects, supported by investment in capital and technology that is second to none.</li><li>And because, as a global energy company, they are faced with addressing some of the world’s biggest technical, logistical, and environmental challenges, they invest heavily in talent development.</li><li>Our partner has a proud history of educating and training their workforce over many decades.</li><li>Employees at all levels are encouraged to improve their sector-specific knowledge and competencies through the workforce development program – one of the largest in the world.</li></ul> Other Information: <ul><li>Our partner occupies a unique position in the global energy industry.&nbsp;</li><li>They are the worlds largest producer of hydrocarbons (oil and gas), with the lowest upstream carbon intensity of any major producer.&nbsp;</li><li>With their significant investment in technology and infrastructure, they strive to maximize the value of the energy they produce for the world along with a commitment to enhance our partners value to society.</li><li>Headquartered in the Kingdom of Saudi Arabia, and with offices around the world, they combine market discipline with a generations’ spanning view of the future, born of their nine decades experience as responsible stewards of the Kingdom’s vast hydrocarbon resources.</li><li>This responsibility has driven our partner to deliver significant societal and economic benefits to not just the Kingdom, but also to a vast number of communities, economies, and countries that rely on the vital and reliable energy that they supply.</li></ul> Organization Overview:&nbsp; <ul><li>We are seeking a Downstream Process Engineer with experience in Utilities processes (GTGs, STGs, Desalinating water unit, Raw water unit, Power generation, Boilers, Cooling water, Demineralized Water, Boiler feedwater, Waste water treatment facilities and recovery, Nitrogen generation &amp; storage, flares, etc) to join our Global Manufacturing Excellence organization under the Downstream Global Manufacturing Support Department (GMSD).</li><li>GMSD’s technical team is a multi-disciplinary team provides the required high-quality technical support to GM operating facilities (Refineries, NGLF, and petrochemical plants) inside the Kingdom of Saudi Arabia &amp; across the globe.</li><li>Your primary role will be to provide process engineering and operations expertise to monitor, optimize, and drive performance improvement programs for Utilities, including remote and field technical advisory support and benchmarking of utilities. You will drive the performance improvement programs which enhance process safety, optimize manufacturing cost, and increase utilities reliability.</li></ul>

Responsibilities: As the successful candidate you will be required to perform the following: <ul><li>Review and monitor the performances of existing Utilities through key performance indicators (KPIs) representing the optimum operability, profitability, reliability, and process safety.&nbsp;</li><li>Issue quarterly utilities performance benchmarking reports highlighting the KPIs, analysis, and performance improvement recommendations.</li><li>Monitor and support the facilities in implementing the recommendations and closing the gaps identified in the quarterly performance benchmarking reports.&nbsp;</li><li>Conduct benchmarking and best practices exchange workshops internally among Global Manufacturing facilities (wholly-owned and affiliates).</li><li>Provide on-demand remote and/or field technical advisory support to Global Manufacturing facilities on matters concerning the operation of Utilities which may include but not limited to process design, process troubleshooting, start-up and shutdown activities and capacity test runs. Issue service report for every support activity provided highlighting the facilities need, actions taken, results, and lessons learned.</li><li>In collaboration with Global Manufacturing facilities engineers, propose cost optimization or process improvement initiatives focusing on ‘low-hanging fruits’ with no or minimal capital investment required, through operational adjustment or design modification.</li><li>Conduct internal assessments on Utilities using engineering standard references. Highlight any deviations or better standards applied by affiliates for endorsement to facility management or Central Engineering.&nbsp;</li><li>Act as the overall coordinator for cascading and driving Global Manufacturing and Corporate programs for the Utilities in the operating facilities enabling their execution and effective monitoring.&nbsp;</li><li>Participate in Business Plan development and coordinate with stakeholders for any capital investments on assigned Utilities and support techno-economic evaluations.</li><li>Be aware of Utilities technology developments in the industry and endorse the evaluation and approval to Central Engineering to facilitate field deployment.</li><li>Support arrangement and facilitation of technical knowledge exchange workshops with major equipment suppliers for Utilities and Global Manufacturing facilities.</li><li>Participate in hazard operability (HAZOP) and safety integrity level (SIL) studies as required by Utility operating facilities.</li></ul> Requirements: <ul><li>You must hold a Bachelor’s degree in Chemical Engineering or related specialization.&nbsp;</li><li>You should have a minimum of 15 years total Utilities unit experience (process engineering and operations) with at least 10 years’ experience in handling utilities.</li><li>Exposure to major equipment suppliers / package units for Utilities is preferred.</li></ul>

Responsibilities: As the successful candidate you will be required to perform the following: <ul><li>Review and monitor the performances of existing Utilities through key performance indicators (KPIs) representing the optimum operability, profitability, reliability, and process safety.</li><li>Issue quarterly utilities performance bench marking reports highlighting the KPIs, analysis, and performance improvement recommendations.</li><li>Monitor and support the facilities in implementing the recommendations and closing the gaps identified in the quarterly performance bench marking reports.</li><li>Conduct bench marking and best practices exchange workshops internally among Global Manufacturing facilities (wholly-owned and affiliates).</li><li>Provide on-demand remote and/or field technical advisory support to Global Manufacturing facilities on matters concerning the operation of Utilities which may include but not limited to process design, process troubleshooting, start-up and shutdown activities and capacity test runs. Issue service report for every support activity provided highlighting the facilities need, actions taken, results, and lessons learned.</li><li>In collaboration with Global Manufacturing facilities engineers, propose cost optimization or process improvement initiatives through operational adjustment or design modification.</li><li>Conduct internal assessments on Utilities using our client engineering standard references. Highlight any deviations or better standards applied by affiliates for endorsement to facility management or our client Central Engineering.</li><li>Act as the overall coordinator for cascading and driving Global Manufacturing and Corporate programs for the Utilities in the operating facilities enabling their execution and effective monitoring.</li><li>Participate in Business Plan development and coordinate with stakeholders for any capital investments on assigned Utilities and support techno-economic evaluations.</li><li>Be aware of Utilities technology developments in the industry and endorse the evaluation and approval to Central Engineering to facilitate field deployment.</li><li>Support arrangement and facilitation of technical knowledge exchange workshops with major equipment suppliers for Utilities and Global Manufacturing facilities.</li><li>Participate in hazard operability (HAZOP) and safety integrity level (SIL) studies as required by Utility operating facilities.</li></ul> Requirements: <ul><li>You must hold a Bachelor’s degree in Chemical Engineering or related specialization.&nbsp;</li><li>You should have a minimum of 15 years total Utilities unit experience (process engineering and operations) with at least 10 years’ experience in handling utilities.</li><li>Exposure to major equipment suppliers / package units for Utilities is preferred.</li></ul>

Overview: <ul><li>We are seeking a Mechanical/Rotating Equipment Engineer to join our new Riyas NGL fractionation RNGLF Department.&nbsp;</li><li>The RNGLF Facilities will include two fractionation trains which include fractionation units, C3 &amp; C4 treatment, C3 &amp; C4 dehydration and propane refrigeration.&nbsp;</li><li>The common facilities will include feed surge and product storage, chemicals storage and utilities.&nbsp;</li><li>Your primary role will be to lead the mechanical design review, follow the construction and leading the commissioning and testing activities for the new shale gas facilities.&nbsp;</li><li>You will have a thorough understanding of plant operations, process technologies, supply and product logistics, business drivers, cost drivers, and feedstock sensitivities.&nbsp;</li><li>In addition, you will have a detailed understanding of product properties, customer applications and requirements.&nbsp;</li><li>You must also demonstrate the ability to work with multidisciplinary teams producing reports, studies and presentations that are pivotal in shaping management’s decisions.</li></ul> Responsibilities: <ul><li>Provide day-to-day technical support to Operations and Maintenance to troubleshoot and fix rotating equipment and mechanical systems.</li><li>Conduct failure analysis of rotating equipment and provide recommendations</li><li>Able to read vibrations spectrums and provide recommendations accordingly</li><li>Develop the engineering designs packages for the new installation and upgrade projects.</li><li>Review project proposals and detailed design packages for new facilities .</li><li>Participate on the testing and commissioning of the new facilities and turnaround and inspection (T&amp;I).</li><li>Update and maintain engineering documentation and drawings.</li><li>Analyze system performance and find solution for early failures and low performance of equipment</li><li>Conduct performance of major rotating equipment</li><li>Lead major rotating equipment overhauls or repair.</li><li>Ensure quality, cost effective and timely solutions to any upgrade.</li><li>Ensure full HSE compliance.</li><li>Report and analyze key performance indices.</li><li>Make recommendations for technical/economic optimization of existing facilities.</li><li>Lead feasibility/profitability studies for new facilities.</li><li>Assist in the training, development and mentoring of younger staff.</li><li>Provide analysis, evaluation and interpretation in support of projects, processes, and financing related to capital investment decisions.</li></ul> Requirements: <ul><li>Bachelors degree in mechanical engineering from an accredited university. A master’s degree is preferred.</li><li>A Professional Engineer (P.E.) or Chartered Engineer (C.Eng.) license or registration will be desirable but is not essential.</li><li>You will have at least 10 years of experience in the industrial operation facility; a shale gas facility is</li><li>preferred. You should also have a good knowledge of the modular skids mounted unit.</li><li>You must have a working knowledge of industry codes and standards, such as ASME and API, such as API-STD-610 and API-STD-617.</li><li>You will have experience with creating/modifying PFDs, and P&amp;IDs.</li><li>You will have experience with troubleshooting and major repair of oil and gas rotating equipment, such as air compressors, pumps and diesel generators.</li><li>You will have experience in creating schematics and piping diagrams.</li><li>You must be able to conduct failure analysis and provide recommendations for failed rotating equipment.</li><li>You will have experience with rotating equipment and piping field installation, commissioning and testing.</li><li>You will have experience in specifying piping and equipment layout.</li><li>You should be capable of communicating with multidiscipline engineers to complete projects. You must have proven ability to communicate effectively with management at all levels within the organization. Capable of spotting and reconciling conflicting views and interests among different parts of the organization</li><li>Strong written and oral communication skills are a requirement.&nbsp;</li></ul>

Role Description: <ul><li>Company is seeking a Senior Process Engineer to join the Transport Technologies Division of Companys Research &amp; Development Center.</li><li>The Transport Technologies Division conducts research and technology development in the area of transport fuels chemistry and advanced engine technologies.</li><li>Our research focuses on the co-optimization of fuel and engine systems while we demonstrate the commercial viability of competitive internal combustion engine (ICE) platforms and low climate impact fuels, which will address the environmental and business sustainability of transport fuels for road, marine and aviation applications.&nbsp;</li><li>The Process Engineer’s primary role is to provide engineering and process optimization support on developing sustainable synthetic fuels and chemicals production facilities including liaison with leading technology and engineering solution providers.</li></ul> Responsibilities: <ul><li>Participate in a unique, world-class project on innovative process design for transport fuels and petrochemicals production.</li><li>Develop, configure and optimize industrial processes and participate in engineering and process design studies.</li><li>Address technical challenges associated with adopting new process and retro fitting to existing refinery configurations</li><li>Perform financial modeling, cost estimates and projections on transport fuels and petrochemicals.</li><li>Conduct techno-economic analysis and benchmarking of R&amp;D projects against commercial and existing technologies&nbsp;</li><li>Analyze the carbon footprint and energy intensity of new and existing refining/petrochemical processes; and suggest process improvements to reduce the carbon footprint and enhance energy efficiency.&nbsp;</li><li>Liaise with business proponent and engineering teams within company.&nbsp;</li><li>Mentor and oversee development of young engineers in the area of specialty.&nbsp;</li><li>Find creative solutions to technical problems, both working individually and within a team.</li></ul> Requirements: <ul><li>Advanced degree in Chemical Engineering or relevant discipline from a recognized and approved program.</li><li>At least 10 years of experience of process engineering in refining/petrochemicals industry.</li><li>Experienced in refinery and petrochemical flowsheeting (PFD and P&amp;ID), and equipment sizing and capital cost estimation</li><li>Knowledgeable about standard refining, petrochemical processes (e.g. fluid catalytic cracking, hydrocracking, reforming,…etc.) and utilities process.&nbsp;</li><li>Able to conduct detailed techno-economic assessment of R&amp;D projects.&nbsp;</li><li>Experience with R&amp;D projects, process development and/or scale up is a plus.&nbsp;</li><li>Strong project management, interpersonal skills and the capability to work effectively across multiple functional departments.</li></ul>

Role Description: <ul><li>The Unconventional Resource (UR) Operations Dept is responsible for operating all the surface facilities which include the field wells and processing facilities. Their role will be to operate the well manifolds, provide field services, maintain the facility and reduce the equipment down time, perform the PM activities, provide maintenance services in addition of providing all the technical engineering and inspection activities. Additional manpower is now required to meet the significant increase in operation activity.</li><li>They are looking to appoint a Process Engineer to lead the process design review, follow the construction and leading the commissioning and testing activities for the new shale gas facilities. The candidate will have a thorough understanding of plant operations, process technologies, supply and product logistics, business drivers, cost drivers, and feedstock sensitivities. In addition, the incumbent will have a detailed understanding of product properties, customer applications and requirements</li><li>The Process Engineer must also demonstrate the ability to work with multidisciplinary teams producing reports, studies and presentations that are pivotal in shaping management’s decisions</li></ul> Responsibilities: <ul><li>Provide day-to-day technical support to the Operation and Maintenance to troubleshoot and fix process equipment</li><li>Develop the engineering designs packages for the new installation and upgrade projects</li><li>Review Project Proposals and Detailed Designs packages for new facilities</li><li>Participate on the testing &amp; commissioning of the new facilities and Turnaround and Inspection (T&amp;I)</li><li>Update and maintain engineering documentation and drawings</li><li>Analyze system performance and find solution for Energy saving</li><li>Ensure quality, cost effective and timely solutions to any upgrade</li><li>Make recommendations for technical/economic optimization of existing facilities</li><li>Lead feasibility/profitability studies for new facilities</li><li>Assists in the training, development and mentoring of younger staff.</li><li>Provides analysis, evaluation and interpretation in support of projects, processes, and financing related to their capital investment decisions.</li><li>Maintains and expands on contacts within the industry.</li><li>Regularly interacts with other professionals in various company organizations involved in capital planning and economic analysis.</li></ul> Requirements: <ul><li>Bachelors Degree in Chemical Engineering, MS is preferred. A Professional Engineer (P.E.) or Chartered Engineer (C.Eng.) license or registration will be desirable but is not essential</li><li>Minimum 15 years of working experience including knowledge in the industrial operation facility, Shale gas facility is preferred.</li><li>Also, has a good knowledge of the Modular skids mounted process unit.</li><li>Detailed knowledge of industry standards and procedures such as API and ASMI codes is required to support the review of company standards, project reviews, and implementation of plant modifications to process systems.</li><li>Experience with creating/modifying PFDs, and P&amp;IDs</li><li>Experience with troubleshooting process equipment and systems failures, including pumps, compressors, pipe line/piping, and dehydration systems.</li><li>Knowledge of HYSIS and other process simulation software</li><li>Experience in creating schematics and piping diagrams</li><li>Conduct failure analysis and provide recommendations for failed process system, sequence of event reporting</li><li>Experience with process equipment and systems field Installation, Commissioning and testing</li><li>Experience in specifying piping and equipment layout</li></ul>

Role Description: <ul><li>We are seeking a Technical Safety (Process Safety) Engineer to join the Loss Prevention organization (LP), which is the corporate safety organization.</li><li>We provide both day-to-day in-field occupational and process safety support to operations, as well as centralized technical support and consulting function.</li><li>Our field offices are located in Abqaiq, Riyadh, Ras Tanura, Dhahran, Udhailiyah, Jeddah (including Yanbu and Jazan), and Tanajib. Through these offices, LP provides its services to all facilities and departments that are located throughout the Kingdom.</li><li>Your primary role as a Technical Safety Engineer is to work with key stakeholder organizations to provide technical guidance on facility design requirements pertaining to fire prevention and process safety engineering areas, including but not limited to firewater systems, fireproofing, emergency shutdown systems, drainage systems, tank designs, electrical classifications, pipeline design factors, equipment access and layout, spacing, risk areas.</li></ul> Responsibilities: <ul><li>As the successful candidate, you will have the requisite knowledge, skills, and experience to:</li><li>Provide technical guidance and develop procedures for all company organizations on fire prevention and process safety engineering in facilities design and related operational requirements, including company and international standards (e.g., NFPA, API).</li><li>Review all new projects to ensure conformance to company and international engineering standards; represent LP at project proposal meetings, and provide continuing guidance through design, construction, and commissioning.</li><li>Provide company-wide technical guidance and assistance during design-related surveys of facilities for adequacy of design, operations and maintenance.</li><li>Analyze fires and process safety incidents both in the industry and to determine causes and whether company standards or other requirements require update or changes, or whether other remedial measures should be considered.</li><li>Initiate and participate in studies to resolve specific problems outside currently available technology.</li><li>Develop training programs in the field of process safety and fire prevention engineering and provide training assistance as required.</li><li>Use risk analysis techniques to identify corporate risk exposure and develop cost-effective solutions.</li><li>Assist in surveys of operations by insurance, Government, and other outside agencies, and act as the Company expert on fire prevention engineering standard requirements.</li><li>Mentor other LP personnel.</li></ul> Requirements: <ul><li>As the successful candidate, you will hold a bachelors degree in chemical engineering or fire protection engineering, and ten years of relevant industry experience in the oil and gas, petrochemicals, or related industries, five of which focused on addressing technical safety and fire prevention engineering issues.</li><li>Professional Engineering licensing/certification/registration in Fire Protection Engineering, or an advanced degree is highly desirable.</li><li>You will have an excellent ability to communicate in English with peers as well as members of management and be able to produce clear and concise oral and written reports in English.</li></ul> Working Environment: <ul><li>Our high-performing employees are drawn by the challenging and rewarding professional, technical and industrial opportunities we offer, and are remunerated accordingly.</li><li>Our people work on truly world-scale projects, supported by investment in capital and technology that is second to none.</li><li>And because, as a global energy company, we are faced with addressing some of the world’s biggest technical, logistical and environmental challenges, we invest heavily in talent development.</li><li>We have a proud history of educating and training our workforce over many decades.</li><li>Employees at all levels are encouraged to improve their sector-specific knowledge and competencies through our workforce development programs – one of the largest in the world.</li></ul>

Responsibilities: <ul><li>Participate in a unique, world-class project on innovative process design for transport fuels and petrochemicals production.</li><li>Develop, configure and optimize industrial processes and participate in engineering and process design studies.</li><li>Address technical challenges associated with adopting new process and retro fitting to existing refinery configurations.</li><li>Perform financial modeling, cost estimates and projections on transport fuels and petrochemicals.</li><li>Conduct techno-economic analysis and benchmarking of R&amp;D projects against commercial and existing technologies.</li><li>Analyze the carbon footprint and energy intensity of new and existing refining/petrochemical processes; and suggest process improvements to reduce the carbon footprint and enhance energy efficiency&nbsp;</li><li>Liaise with business proponent and engineering team.</li><li>Mentor and oversee development of young engineers in the area of specialty.&nbsp;</li><li>Find creative solutions to technical problems, both working individually and within a team.&nbsp;</li></ul> Requirements: <ul><li>Advanced degree in Chemical Engineering or relevant discipline from a recognized and approved program.</li><li>At least 10 years of experience of process engineering in refining/petrochemicals industry.</li><li>Experienced in refinery and petrochemical flowsheeting (PFD and P&amp;ID), and equipment sizing and capital cost estimation</li><li>Knowledgeable about standard refining, petrochemical processes (e.g. fluid catalytic cracking, hydrocracking, reforming,…etc.) and utilities process.&nbsp;</li><li>Able to conduct detailed techno-economic assessment of R&amp;D projects.&nbsp;</li><li>Experience with R&amp;D projects, process development and/or scale up is a plus.</li><li>Strong project management, interpersonal skills and the capability to work effectively across multiple functional departments.</li><li>Proven track record of excellence in previous positions held.&nbsp;</li></ul>

Skills

Industry

Location

Jobtitle

673 process engineer – utilities operations engineering solutions Jobs found

Process Engineer - Utilities

Process Engineer - Utilities

Process Engineer - Utilities ( GM )

Mechanical Engineer

ASC - Process Engineer

Senior Process Engineer

Process Engineer

Technical Safety (Process Safety)

ASC - Technical Safety (Process Safety)

Senior Process Engineer

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

673 process engineer – utilities operations engineering solutions Jobs found

Process Engineer - Utilities

Process Engineer - Utilities

Process Engineer - Utilities ( GM )

Mechanical Engineer

ASC - Process Engineer

Senior Process Engineer

Process Engineer

Technical Safety (Process Safety)

ASC - Technical Safety (Process Safety)

Senior Process Engineer

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.