Executive Assistant and Administrative Lead

Sr. Manager, Quality & Reliability Engineering

Customer Service Specialist

R&D/Product Dvl Engineer II

Scientist I, Quality Control LTS

Operator III, Packaging - 2nd Shift

Business Process Analyst – Purchasing

Business Process Analyst – Warehouse/Logistics

Senior Engineer, Real-Time Defect Analysis (RDA), Equipment Development

Staff/Principal Engineer, NAND TD, RDA

Responsibilities: Executive Support: <ul><li>Act as the primary point of contact for internal and external stakeholders on behalf of the MD.</li><li>Manage complex calendars, schedule meetings and appointments.</li><li>Prepare agendas, presentations, and reports for meetings.</li><li>Handle email correspondence and ensure timely responses.</li></ul> Travel Management: <ul><li>Liason with travel partner as SPOC for Travel Desk. Ensure timely wallet top up and accurate record-keeping. Manage Travel partner payment process and vendor management on SAP.</li><li>Arrange and coordinate domestic and international travel accommodations for the executives and others, including flight bookings, hotel accommodations, transportation, and itinerary planning.</li><li>Monitor travel itineraries, provide updates, and address any last-minute changes or emergencies.</li></ul> Confidentiality and Discretion: <ul><li>Handle sensitive and confidential information with intergrity, discretion and professionalism.</li><li>Maintain a high level of confidentiality in all aspects of the role.</li></ul> Compliance: <ul><li>Ensure 100% compliance on:&nbsp;</li><li>Vendor onboarding and documentation</li><li>Office safety protocols</li><li>Third-party office staff compliance</li><li>POSH training completion for all employees</li><li>Maintain accurate compliance records and provide periodic reports.</li></ul> Vendor Management: <ul><li>Oversee compliant and timely onboarding of vendors.</li><li>Supervise procurement quality assurance in SAP.</li><li>Ensure adherence to procurement policy from PO to Pay cycle.</li><li>Maintain accurate records for PO process, approvals, invoices, and agreements.</li></ul> Budgeting: <ul><li>Track monthly admin budget and ensure spend efficiency.&nbsp;</li><li>Provide 100% accurate monthly budget forecasting.&nbsp;</li><li>Monitor expenses and prepare reports for leadership review.</li></ul> Employee Engagement: <ul><li>Lead quarterly and annual R&amp;R programs, including trophy and certificate management.&nbsp;</li><li>Arrange and coordinate office events, meetings, and conferences, including logistics and catering arrangements.</li><li>Organize annual employee meets and engagement activities.&nbsp;</li><li>Ensure comprehensive onboarding for new joiners.</li></ul> Administrative Support &amp; Office Management: <ul><li>Oversee the general administrative functions of the office, handle administrative tasks including drafting correspondence, filing documents, and maintaining organizational systems.</li><li>Oversee the smooth operation of the corporate office, ensuring office supplies are stocked, equipment is maintained, and facilities are well-organized.&nbsp;</li><li>Ensure office operations run smoothly, maintaining a clean and well-organized workspace.</li><li>Help with ad-hoc tasks and projects as directed by the CXOs and corporate employees.</li><li>Serve as a liaison with building management vendor, external vendors, and service providers to address any office-related needs/issues.&nbsp;</li><li>Supervise office pantry and security staff</li></ul> Communication and Correspondence: <ul><li>Act as the primary point of contact between the CXOs and internal/external stakeholders.</li><li>Handle incoming and outgoing communications, including emails, phone calls, and mail.</li><li>Draft and proofread documents, reports, and presentations.</li><li>Draft and distribute internal and external communications, including announcements and reports for the CXOs</li><li>Coordinate and facilitate effective communication within the office.</li></ul> Requirements: <ul><li>5 years +&nbsp;</li><li>Global MNC experience is preferred.</li><li>Bachelors degree in business administration, management, or a related field (preferred).</li><li>Proven experience as both personal assistant and admin lead.</li><li>Excellent communication skills, both written and verbal, with the ability to interact professionally with individuals at all levels.</li><li>Strong attention to detail and accuracy in all work performed.</li><li>Strong organizational and multitasking abilities.</li><li>Arrange and coordinate office events, meetings, and conferences, including logistics and catering arrangements.</li><li>Understanding of 3rd Party Compliances.</li></ul>

Responsibilities: <ul><li>Lead a global team of Advanced Quality Engineers in support of all new product introductions for a Strategic Product Line Portfolio within the Digital Data Networks (DDN) business unit. Lead all AQE activities from project inception to product launch and introduction.</li><li>Participate in the project Kick-off Meetings, support project team development for internal requirements, customer specific requirements, Risk Priority Number (RPN) reductions, analyze SPC data, etc.</li><li>Serve as the liaison between engineering and the plants on new product introductions to ensure robust process capability on all programs.</li><li>Attend project meetings and APQP driven events with the customers and the Project/Program Management Team.</li><li>Document the results for specific program characteristics and ensure the internal and external requirements are met including deviations.</li><li>Accountable for developing and driving on time delivery of Control Plans, Capability Studies, Part drawings, Inspection Instructions, Gage design and R&amp;R, DFMEAs, PFMEAs, AFMEAs for all assigned projects. Ensure the products developed are Designed for Manufacturing &amp; Assembly (DfMA) and are launched capably of meeting internal requirements and customer requirements.</li><li>Understand product requirements and define/approve Design Validation Test (DVT) and quality plans to ensure products meet the product specifications.</li><li>Authorize and approve that all Design Validation Test (DVT) results meet product specifications and customer requirements.</li><li>Actively participate in early product Concept Reviews and Design Review meetings with the Product Development Engineering (PDE) for the assigned product, related tooling and fixturing, and overall quality plans.</li><li>Generate and/or champion 8-Ds for the prototype process including 8-Ds for problem solving, test failures, and prototype failures.</li><li>Complete the Change Control process and identify special characteristics for projects/programs.</li><li>Work in conjunction with the Manufacturing Process Development Engineering (MPDE) teams to ensure the manufacturing process and equipment meets the product’s defined quality level and that the process also meets the capability levels identified for the product and project.</li><li>Assemble and submit PPAP package on time to the customer specific requirement.</li><li>Team with Supplier Quality Engineers to conduct and analyze process capability studies in support of Final Tool Approval (FTAR) for all tools and production lines associated with the project using the Comprehensive Tool Approval Report (CTAR), support completion of Supplier PPAPs.</li><li>Perform Six Sigma Capability Analysis of new equipment/processes to reduce variation.</li><li>Regularly reports to executive management on the overall performance and effectiveness of the Global Supplier Quality Program.</li><li>Drive high performance organization by providing your team routine coaching and feedback, holding your team accountable to meet performance objectives, and providing meaningful development to increase individual/team capability.</li><li>Manage employee well-being by prioritizing work, effectively managing resource loading, and providing flexibility to enable employees to successfully balance their work and personal lives.</li><li>Drive organization effectiveness by structuring your organization in a way that best enables the BU strategy, maximizes resource efficiency and productivity, and provides role clarity and clear lines of accountability.</li><li>Manage the talent in your organization to support the business now and to proactively prepare for the future by identifying organization skillset/role gaps, implementing plans to fill any skillset/role gaps, and assessing current talent fit to ensure the right talent is matched to the right roles to best meet the needs of the business.</li></ul> Requirements: <ul><li>Bachelor/ Master’s degree in technical discipline (Electrical Engineering, Electronics, Mechatronics)</li><li>10+ years of Experience in Quality, Advanced Quality Engineering, and working in global organizations.</li><li>Experience managing engineering teams in cross-functional, multi-site global organizations to drive effectiveness across geographical boundaries and deliver projects with multiple dependencies and constraints.</li><li>Demonstrated ability to forge strong internal working relationships with senior functional counterpart leaders.</li><li>Experience in the use of Lean, Six Sigma, Design for Six Sigma (DFSS), Design for Manufacturability &amp; Assembly (DfMA), Kaizen, 8D and other advanced statistical methods including Design of Experiments (DoE), Statistical Process Control (SPC) and Process Capability (CpK) analysis techniques.</li><li>Comprehensive knowledge and understanding of departmental, company, and corporate procedures and systems, i.e. ISO9000, ISO9001, IATF16949, ISO14001, VDA, PPAP, DFMEAs, PFMEAs, APQP Gate Reviews, GD&amp;T.</li><li>Excellent verbal and written communication skills and the ability to interact professionally with customers, leadership, stakeholders, cross functional teams and subject matter experts.</li><li>Proven track record of being able to work on multiple demanding programs in parallel while maintaining on-time completion of all defined project tasks and deliverables.</li><li>Ability to prioritize responsibilities in a fast-paced dynamic work environment.</li><li>Willingness to travel as required, ~30%</li></ul>

Responsibilities: Quote and Order Management: <ul><li>Interface with Customers for Quote request or Price inquiries and approval</li><li>Submit quotation request for pricing team approval.&nbsp;</li><li>Sales order entry, order confirmation &amp; expediting orders.</li><li>Order change and backlog price adjustment</li><li>On-going Backlog Management</li><li>Shipment release and follow up</li><li>Report and support past due backlog reduction</li><li>NPI - follow up with PM/Plant/Finance for part master and cost setup</li><li>Handle Sample order</li><li>Process RMA / Goods replacement</li></ul> Customer Service: <ul><li>Handle customer enquiries &amp; complaints. Investigate and work with other departments to resolve customer issues in a timely manner.&nbsp;</li><li>Emails/Conference calls / Customer and company Plant Visits for critical delivery issues, expedition or projects.&nbsp;</li><li>Work out solutions on Customer’s special requirements, such as label, Customs process, packing &amp; etc.&nbsp;</li><li>NPS/VOC/Customer Service Survey Improvement Process. Identify and work on corrective actions to recurring issues.&nbsp;</li></ul> Customer Supply Chain Management: <ul><li>Initiate Stock Requisition for customer advance order or buffer stock.</li><li>Work with Planning team on capacity adjustment in order to fulfill Customer’s demands</li><li>Consignment Stock Management/ Customer demand forecast monitoring and accuracy analysis</li><li>Manage customer forecast/demand and inventory level, work with Supply Chain to fulfill customer demand.&nbsp;</li><li>Negotiate with Customer for VMI liability and deadstock compensation.</li><li>Resolve logistics and custom issues with relevant functions</li></ul> Customer Credit and Billing Management: <ul><li>Billing attainment</li><li>Follow up queries with Account Receivable</li><li>Coordinate with Finance and Customer to solve pass due invoices issue</li><li>Manage customer credit status &amp; escalate for any abnormal status</li><li>Apply credit release</li><li>Process Credit note / Debit Note</li></ul> Requirements: <ul><li>Bachelor’s degree or equivalent</li><li>2–3+ years in customer service / order management (manufacturing preferred)</li><li>Strong communication and stakeholder management skills</li><li>Experience handling customer complaints and resolution</li><li>Ability to work under pressure in a fast-paced environment</li><li>Proactive mindset with strong ownership and accountability</li><li>SAP knowledge preferred</li><li>Mandarin communication capability is a plus</li></ul>

Responsibilities: <ul><li>Subject matter expert in signal integrity design, simulation and validation activities through product development cycles</li><li>Establishing signal integrity design performance/functional requirements for new products</li><li>Performing signal integrity simulations for multiple high-speed standards on each product. This includes determining the correct simulation methodology and setup to use, as well as a good understanding of the criteria for each interface.</li><li>Performing PCB design schematic and layout reviews</li><li>Creating actionable recommendations based upon design reviews and simulation results</li><li>Guiding connector design and component qualifications from a signal integrity standpoint. Making data driven decisions about the product functionality and areas for improvement.</li></ul> Requirements: <ul><li>Bachelor’s degree in Electrical Engineering.</li><li>Experience with interconnect design or experience with connector &amp;/or cable/cable assembly design (high speed twinax/RF cables, direct attach copper (DAC) cables)</li><li>Demonstrated experience using Signal integrity analysis tools (Agilent ADS, Ansys HFSS or equivalent)</li><li>A solid understanding of electromagnetic theory and electrical circuit behavior</li><li>Strong analytical capabilities to interpret simulation and lab data to identify issues and provide solutions to fix identified problem.</li><li>Familiarity with printed circuit board design, fabrication and assembly.</li><li>Excellent verbal and written communication skills</li><li>Ability to work in a global environment – able to accommodate varying time zones, fluent in English (verbal/written), able to collaborate with individuals across geographies</li><li>Solid presentation skills with an ability to clearly communicate technical concepts to diverse audiences in English</li><li>Individual must be highly motivated, a quick learner, and able to work independently</li></ul>

Role Description: <ul><li>The Scientist, Laboratory Technical Services is primarily responsible for supporting the analytical testing requirements of commercial/pre-commercial materials and products, including method development, validation and transfer, pre-commercial/commercial testing of materials and samples in a regulated laboratory environment. </li><li>Has expert proficiency in conducting all types of physical and chemical analysis (including the most complex analysis) using all equipment. </li><li>This position will have a significant role supporting pending ANDA submissions, product launches, and method lifecycle activities to achieve company goals and initiatives. Write and review SOPs, test methods, validation protocols and reports. The Scientist also provides mentoring to Chemist.</li></ul> Responisbilities: Analysis &amp; Testing: <ul><li>Validate analytical methods for finished product and raw material release and stability testing.</li><li>Evaluates, troubleshoot/improves existing analytical methods when necessary.</li><li>Prepares method validation protocols, reports, and analytical test methods.</li><li>Performs testing to support process and formulation development (e.g. excipient, compatibility, solubility, dissolution studies, stability/impurity assessment)</li><li>Performs work to support project assigned with little oversight.</li><li>Presents analytical data to project team for review and discussion</li><li>Reviews and approves laboratory test data and documentation (e.g. notebooks, raw data and technical documentation, test methods, validation protocols, or validation report) for completeness and compliance when necessary</li><li>Reviews and evaluates drug substance supplier’s technical documents to ensure internal testing test requirements are adequate.</li><li>Uses laboratory software for analysis.</li><li>Is alert to and detects abnormalities during performances of test and reviews.</li></ul> Lab Equipment: <ul><li>Provides general laboratory support such as routine instrument cleaning/preventative maintenance/calibration, sample receiving, chemical inventory, document filing and housekeeping.</li><li>Cleans lab working surfaces and dispose of any excess chemicals, solutions, solvents, etc. in the special waste containers for each class of waste chemicals</li><li>Troubleshoots instrumentation and performs subsequent analyses</li></ul> Investigations: <ul><li>Evaluates questionable sample results, OOS, and aberrant results immediately to Supervisor and recommends a course of action related to LTS activities</li><li>Participates in root cause identification of complex laboratory investigations.</li><li>Writes, edits, and reviews SOPs and laboratory investigations</li></ul> Training: <ul><li>Train junior Scientist/Chemists on analytical techniques.</li><li>Continuously updates knowledge with respect to the latest technologies related to analytical science</li><li>Maintains assigned training records current and in-compliance</li><li>Actively assumes/demonstrates responsibility in training others in good documentation practice, practical lab skills, and chemical theories, methodologies and procedures</li></ul> Compliance: <ul><li>Identifies need for SOPs and writes or revises, as appropriate</li><li>Performs work in a timely and safe manner conforming to regulatory, company and compendial requirements within pharmaceutical manufacturing setting. Works in compliance with cGMP/cGLP regulations</li><li>Documents data generated in notebooks/worksheets/LIMS in compliance with SOPs</li><li>Takes active role in auditing laboratory logbooks/documentation to ensure compliance</li><li>Follows internal processes related to controlled substances</li></ul> Safety: <ul><li>Follows EH&amp;S procedures to ensure a safe work environment</li><li>Follows all applicable safety and standards guidelines, such as SOPs, cGMP, DEA regulations good documentation practice and/or MSDS</li></ul> Requirements: Education &amp; Experience: <ul><li>Bachelor of Science Degree in chemistry, chemical engineering or related field with 6 years’ relevant analytical laboratory experience OR</li><li>Master’s degree in above disciplines with 4 years’ relevant analytical lab experience OR</li><li>PhD in above disciplines with some relevant analytical laboratory experience preferred</li></ul> Knowledge &amp; Skills: <ul><li>Has strong knowledge of laboratory software and has expanded knowledge of chromatographic software (e.g. Waters Empower, Agilent ChemStation and Sotax WinSotax), using custom fields, custom calculations and custom reports.</li><li>Full proficiency with various laboratory techniques/instruments: HPLC, UV-Vis, FT-IR, GC and dissolution tester, melting point apparatus, viscometer, Karl Fischer titrator, pH meter, analytical balance, etc.</li><li>Thorough knowledge of applicable safety and standards guidelines, such as FDA, ICH, SOP, cGMP, GLP, DEA regulations and/or MSDS</li><li>Has demonstrated competence in conducting chemical analyses</li><li>Strong knowledge of wet chemistry techniques</li><li>Competency in Microsoft Office Suite</li><li>Ability to critically review, analyze data, interpret information, and draw conclusions from relevant or missing information</li><li>Ability to display and analyze data in a logical manner</li><li>Strong verbal and written communication skills as well as good computer skills</li><li>Strong attention to details and accurate record keeping</li><li>Establish and maintain cooperative working relationships with others.</li><li>Solid organizational skills</li><li>Ability to coach less senior staff and develop laboratory skills and ability</li><li>Ability to take initiative, set priorities and follow through on assignments</li></ul> Physical Requirements: <ul><li>Extended periods of sitting, standing, walking, reaching, climbing/balancing, kneeling/crouching/crawling, looking at monitor for extended periods, moderate noise levels and potential business travel. Work is in an FDA and DEA-regulated pharma lab environment with risk of exposure to various chemicals</li><li>Must occasionally lift and/or move up to 15-25 lbs.</li><li>Ability to wear personal protective equipment, including respirators, gloves, etc.</li><li>Specific visions abilities are required by this job include close vision and color vision</li><li>Ability to occasionally tolerate significant differences in temperature and/or humidity for short periods.</li></ul>

Role Description: <ul><li>With thorough knowledge and skills in all areas of the packaging process, performs more advanced functions relating to the packaging of drug products consistent with established Current Good Manufacturing Practices (cGMP), customer requirements and in conjunction with all Standard Operating Procedures (SOP). Is qualified in both Filling and Labeling. </li><li>Is qualified and capable of competently running all packaging equipment across the entire packaging department. </li><li>Responsible for the safe and efficient execution of their job duties, while ensuring product compliance to established standards. May serve as back-up to the Senior Packaging Technician.</li></ul> Responsibilities: Packaging Operations: <ul><li>Is qualified and capable of competently running all packaging equipment across the entire packaging department</li><li>Is qualified in both Filling and Labeling</li><li>Ensures that all equipment is running properly</li><li>Executes processes such as material handling, capping, outserts/med guides, in-process checks, packing, stacking, cartooning, etc.</li><li>May request components, labels and inserts per the BPR</li><li>Sets up packaging machinery; accurately sets equipment programming according to BPRs and SOPs</li><li>Sets up, starts, operates, adjusts, troubleshoots and tears down packaging lines</li><li>Executes Batch Production Record (BPR) and logbook documentation with detail and accuracy</li><li>Accurately reviews BPRs steps for completeness and accuracy</li><li>Collects samples from each batch and submits to QA for retained samples</li><li>Demonstrates the ability to execute procedures and complete tasks in a compliant and safe manner</li></ul> Equipment Cleaning: <ul><li>Conducts verification of line/equipment cleaning and documents per SOP</li><li>Executes the procedures used to clean pharmaceutical packaging equipment and facilities</li><li>Conducts Master Cleans and Surface Cleans</li></ul> Continuous Improvement : <ul><li>Identifies 6S opportunities and sustains the 6S process</li><li>Assists in troubleshooting process issues</li></ul> Issues and Deviations: <ul><li>Identifies and reports processing related issues to Packaging Supervisor and to Quality personnel.</li></ul> Quality: <ul><li>Executes the required in-process product quality checks and documents accurately.</li></ul> Teamwork and Collaboration: <ul><li>Demonstrates the ability to work in collaboration with others as a part of a team.</li></ul> Training: <ul><li>Stays current on SOPs and cGMPs.</li><li>May participate in training qualifier classes.</li></ul> Safety and Compliance: <ul><li>Participate in safety teams, start-up discussions, incident debriefs, etc.</li><li>Carries out processing/packaging activities safely, as required, on a daily basis.</li><li>Follows all safety and compliance procedures and participates in required training.</li><li>Adheres to all cGMP compliance/regulatory mandates and quality requirements.</li><li>Ensures compliance with SOPs, Policies and Procedures as required by Par and regulatory agencies</li></ul> Misc.: <ul><li>Other related duties as assigned to meet departmental and Company objectives.</li></ul> Requirements: Education &amp; Experience: <ul><li>High school diploma or equivalent.</li><li>3 years of packaging experience</li></ul> Knowledge &amp; Skills: <ul><li>Knowledge of cGMP regulations and processes.</li><li>Qualified in both Filling and Labeling</li><li>Qualified and capable of setting up and running all machinery in the value stream</li><li>Competent in Master Clean/Surface Clean</li><li>Ability to sample batches</li><li>Ability to follow both verbal and written instructions including SOP’s and Batch Record documentation</li><li>Ability to accurately and precisely record data and batch information</li><li>Ability to work in both independent and team environments</li><li>May become a certified trainer and provide certified training in one process</li><li>Effectively interfaces with other department personnel if Senior level (4th level) isn’t available</li><li>Ability to troubleshoot process issues</li><li>Ability to Identify 6S opportunities and sustain the 6S process</li><li>Ability to participate in Continuous Improvement projects</li><li>Proficient in reading and writing English to understand work instructions and document results</li></ul> Physical Requirements: <ul><li>Must be able to stand for long periods of time (8- or 12-hour shifts), lift at least 35 pounds, climb ladders, wear a dust mask or respirator and pass associated respirator tests and/or requirements, and be able to wear all required PPE, including safety glasses, ear plugs, and safety shoes.</li><li>Dexterity - ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.</li><li>Vision - ability to see details at close range (within a few feet of the observer).</li><li>Multi-limb Coordination - ability to coordinate two or more limbs (for example, two arms, two legs, or one leg and one arm) while sitting or standing.</li></ul>

Responsibilities: Process Documentation and Modelling: <ul><li>Collaborate with business stakeholders and process owners to understand and document existing processes using BPMN notation.</li><li>Create detailed process maps, workflows, and diagrams that accurately represent the end-to-end processes and related activities (process map should include clear RACI, Tools, WI)</li><li>Ensure that all process documentation is clear, consistent, and follows best practices in BPMN modelling.</li><li>Adopt Single Source of Truth concept, utilize BPMN-tool to create, update, and maintain process documentation in a centralized and accessible manner.</li><li>Ensure process KPI are define &amp; documented</li></ul> Process Analysis and Optimization: <ul><li>Work with process owner to analyse processes &amp; identify inefficiencies, bottlenecks, and areas for improvement.</li><li>Work with process owner &amp; cross-functional teams to propose for process optimizations and enhancements using BPMN-tool capabilities.</li><li>Validate process changes with stakeholders and ensure that process improvements align with organizational goals, including handshake process to cross functional team</li><li>Ability to perform data analysis with big data and summarize into actionable insight</li></ul> System Knowledge &amp; Analysis: <ul><li>Understand D365 system logic &amp; guide users to follow the documented purchasing processes &amp; principles during day-to-day operation</li><li>Able to drill through system data &amp; perform analysis per business request using available analytic tools (PowerBI, Excel, Power Apps, etc)&nbsp;</li></ul> Requirements: <ul><li>Bachelors degree in Supply Chain Management, Business Administration, Management, Purchasing or a related field. Masters degree is a plus.</li><li>Proven experience (typically 5+ years) in business process management, process documentation, or related roles.</li><li>At least 3 years working experience in operational supply chain functions (mainly focus on purchasing)</li><li>Excellent project management skills, planning, prioritization, ability to innovate and execute on solutions that matter, and provide timely updates/recommendations.</li><li>Good analytical, influencing and problem-solving skills and ability to handle team and client discussions.</li><li>Flexible to take on ad-hoc assignment or project as necessary.</li><li>Logical &amp; Analytical mindset with the ability to identify process improvement opportunities through data analysis.</li><li>Excellent communication skills, both written and verbal, to effectively collaborate with stakeholders and present complex concepts.</li><li>Understanding of process improvement methodologies such as Lean, Six Sigma, or Business Process Reengineering (BPR).</li><li>Familiarity with compliance and regulatory requirements related to business processes.</li><li>Experience with stakeholder management with strong influencing skillset</li></ul>

Responsibilities: Process Documentation and Modelling: <ul><li>Collaborate with business stakeholders and process owners to understand and document existing processes using BPMN notation.</li><li>Create detailed process maps, workflows, and diagrams that accurately represent the end-to-end processes and related activities (process map should include clear RACI, Tools, WI)</li><li>Ensure that all process documentation is clear, consistent, and follows best practices in BPMN modelling.</li><li>Adopt Single Source of Truth concept, utilize BPMN-tool to create, update, and maintain process documentation in a centralized and accessible manner.</li><li>Ensure process KPI are documented</li></ul> Process Analysis and Optimization: <ul><li>Work with process owner to analyse processes &amp; identify inefficiencies, bottlenecks, and areas for improvement.</li><li>Work with process owner &amp; cross-functional teams to propose for process optimizations and enhancements using BPMN-tool capabilities.</li><li>Validate process changes with stakeholders and ensure that process improvements align with organizational goals, including handshake process to cross functional team</li></ul> System Knowledge &amp; Analysis: <ul><li>Understand D365 system logic &amp; guide users to follow the documented planning processes &amp; principles during day-to-day operation</li><li>Able to drill through system data &amp; perform analysis per business request using available analytic tools</li></ul> Requirements: <ul><li>Bachelors degree in Supply Chain Management, Business Administration, Management, Information Technology, Warehouse/Logistic or a related field. Masters degree is a plus.</li><li>Proven experience (typically 5+ years) in business process management, process documentation, or related roles.</li><li>At least 3 years working experience in operational supply chain functions (Warehouse/Logistic)</li><li>Excellent project management skills, planning, prioritization, ability to innovate and execute on solutions that matter, and provide timely updates/recommendations.</li><li>Good analytical, influencing and problem-solving skills and ability to handle team and client discussions.</li><li>Flexible to take on ad-hoc assignment or project as necessary.</li><li>Logical &amp; Analytical mindset with the ability to identify process improvement opportunities through data analysis.</li><li>Excellent communication skills, both written and verbal, to effectively collaborate with stakeholders and present complex concepts.</li><li>Understanding of process improvement methodologies such as Lean, Six Sigma, or Business Process Reengineering (BPR).</li><li>Familiarity with compliance and regulatory requirements related to business processes.</li></ul>

Responsibilities: <ul><li>Technical Expertise: Capable to provide manual cuts along with building skills for future automated FIB cuts&nbsp;</li><li>Analytical Skills: Strong data analysis and problem-solving abilities.</li><li>Equipment Management: Set up equipment, monitor stability, improve capability, and interact with vendor representatives for advanced functionality and application work.</li><li>Recipe Management: Write or modify equipment recipes to support the needs of the RDA area.</li><li>Tool Recovery: Perform basic and advanced recoveries of down tools for assigned workstations.</li><li>Software Upgrades: Drive software upgrades and improvements, working with internal and external vendors for implementation.</li><li>Tool Monitoring: Monitor tool qualification SPC charts for deviations, initiate tool repairs, and adjust limits as necessary.</li><li>Data Science skills: Apply scripting, coding, or programming for monitoring performance and capabilities of the inspection data</li><li>Data Analysis: Collect and analyze tool/process data to suggest ways to improve performance and efficiency.</li><li>Collaboration: Collaborate with vendors for escalation results on application issues and with Equipment Owners to identify long-term solutions to tool issues.</li><li>Communication: Excellent verbal and written communication skills for effective vendor and team interactions.</li><li>Project Management: Ability to manage multiple projects and priorities effectively.</li></ul> Requirements: Application Expertise:&nbsp;<ul><li>Deep technical expertise in Focused Ion Beam (FIB) operations, including advanced cross sectioning, milling optimization, and defect characterization</li><li>Strong proficiency in SEM imaging and interpretation for systematic/random defect identification</li></ul> Training and Mentoring:&nbsp;<ul><li>Proven experience in training and mentoring engineers and technicians</li></ul> Vendor Relations: <ul><li>Experience working with vendors for FIB/SEM equipment setup, troubleshooting, and upgrades &gt;3years</li></ul> Education:&nbsp;<ul><li>Bachelor’s or Masters Degree in Electrical Engineering, Chemical Engineering, Materials Science &amp; Engineering, or related field accepted</li></ul> Experience: <ul><li>More than 5 years semiconductor manufacturing experience in RDA/inspection recipe setup for defect analysis&nbsp;</li></ul>

Responsibilities: <ul><li>Own the site-level RDA strategy and annual roadmap aligned to NAND TD technology nodes.</li><li>Lead analysis of experimental and production flows to detect, classify, and trend systematic and random defects.</li><li>Establish, track, and report program health metrics (baseline health, detection rates, false positives, MTTR).</li><li>Direct fast containment for defect excursions: trigger tool quarantines, define hold criteria, and lead 8D corrective actions.</li><li>Architect inspection recipes and sampling strategies; optimize sensitivity, throughput, and cost of ownership.</li><li>Partner with Process Integration, Yield, and Data Science to correlate inspection signals to device performance and yield.</li><li>Influence supplier roadmaps; evaluate, qualify, and release next gen optical/e-beam inspection capabilities.</li><li>Standardize and disseminate Best Known Methods (BKM) across global TD and manufacturing sites.</li><li>Mentor, coach, and upskill engineers; develop succession plans and technical ladders within the RDA domain.</li><li>Champion safety and continuous improvement (CIP); drive kaizen/lean initiatives that improve cycle time and learning velocity.</li></ul> Requirements: <ul><li>Bachelor’s degree with 7+ years relevant semiconductor experience, or Master’s/PhD with 5+ years.</li><li>Minimum 3+ years hands-on RDA experience in semiconductor manufacturing or equipment engineering.</li><li>Demonstrated expertise in defect inspection, process monitoring, and yield learning.</li></ul> Technical Competencies <ul><li>Realtime Defect Analysis (RDA) systems and workflows.</li><li>Optical and e-beam inspection technologies.</li><li>Statistical data analysis, correlation development, and large dataset interpretation.</li><li>Semiconductor process integration and technology development.</li><li>Root cause analysis and systematic problem solving (e.g., 8D, DMAIC).</li><li>Leadership &amp; Behavioral Competencies</li><li>Recognized technical authority with the ability to influence without direct authority.</li><li>Strong mentoring and coaching mindset with proven talent development outcomes.</li><li>Clear, concise communication skills across technical and executive audiences.</li><li>Ownership-driven, execution-focused; comfortable operating in ambiguity.</li><li>Impact &amp; Success Measures</li><li>Reduced defect-related yield loss and faster learning cycles.</li><li>On-time qualification and adoption of next-generation inspection capabilities.</li><li>Uplift in organizational RDA skill depth and succession pipeline.</li><li>Alignment of inspection strategy and capability to future NAND nodes.</li></ul>

Skills

Industry

Location

Jobtitle

286 process engineersenior engineer – backgrindplasma dicingtaping Jobs found

Executive Assistant and Administrative Lead

Sr. Manager, Quality & Reliability Engineering

Customer Service Specialist

R&D/Product Dvl Engineer II

Scientist I, Quality Control LTS

Operator III, Packaging - 2nd Shift

Business Process Analyst – Purchasing

Business Process Analyst – Warehouse/Logistics

Senior Engineer, Real-Time Defect Analysis (RDA), Equipment Development

Staff/Principal Engineer, NAND TD, RDA

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

286 process engineersenior engineer – backgrindplasma dicingtaping Jobs found

Executive Assistant and Administrative Lead

Sr. Manager, Quality & Reliability Engineering

Customer Service Specialist

R&D/Product Dvl Engineer II

Scientist I, Quality Control LTS

Operator III, Packaging - 2nd Shift

Business Process Analyst – Purchasing

Business Process Analyst – Warehouse/Logistics

Senior Engineer, Real-Time Defect Analysis (RDA), Equipment Development

Staff/Principal Engineer, NAND TD, RDA

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.