Staff R&D/Product Development Engineer

ASC - Instructional Designer

Product Engineering Manager

Staff Product Engineer

Sr. R&D Product Development Engineer

Sr R&D/Product DVL Engineer - CPU Socket

Sr R&D/Product DVL Engineer

Staff R&D/Product DVL Engineer

Manager II, MPDE

Responsibilities: <ul><li>Communicate with customer to quickly generate new connection solution design.</li><li>Prepare product design document, such as: PRD, DV/PV plan, Product review, Initial BOM, DFMEA and Significant Characteristic.&nbsp;</li><li>Perform engineering calculations to analyze and describe product to ensure robust design with economic cost.</li><li>Regenerate existing products with new solutions to improve competitive advantage.&nbsp;</li><li>Understanding product testing procedures and equipment, reviewing evaluation or test report and confirming accuracy of report contents to ensure product meets quality specification.</li><li>Support new product technical data output, such as: 3D, 2D drawing and Design objective.&nbsp;</li><li>New technical solutions study and research, such as LV high current, Al application, FFC application</li></ul> Requirements: <ul><li>Education: B.S. of Engineering or Master Mechanical Engineering preferred.</li><li>Qualification &amp; Certification: Patents as first author</li><li>Experience: 5+ experience on connector design.</li></ul>

Responsibilities: Duties may include, but are not limited to, the following: <ul><li>Analyze, design, develop, implement, and evaluate performance solutions.</li><li>Identify opportunities to implement improvements to increase effectiveness of curriculum.</li><li>Partner with potential customers including employees, SMEs, management, and leaders from multiple business lines to implement effective learning solutions.</li><li>Develop and implement standards and procedures to ensure the relevance of</li><li>learning content.</li><li>Work with team members to manage content on LMS and assist with implementation of</li><li>a LCMS.</li><li>Utilize learning technologies where appropriate to provide effective content delivery.</li><li>Leverage relevant systems for e-learning, virtual learning, collaboration, mobile learning, learning management, content management, knowledge management, talent management, and performance monitoring.</li></ul> Requirements: As a successful candidate you should have a Bachelor’s degree in Instructional Design, Human Resource Development, Adult Education, Organizational Development, or similar field. <ul><li>Ten (10) years of experience related to the analysis, design, development, implementation, facilitation, and evaluation of learning, development, and performance solutions.</li><li>High level of familiarity using learning technologies, including learning management systems, virtual communication platforms (e.g., Zoom), and e-learning development</li><li>(e.g. Storyline, Rise and Captivate).</li><li>3 years of facilitation experience</li><li>ESL Certification preferred</li><li>Experience with AR/VR implementation preferred</li><li>Certified Professional in Talent Development (CPTD) or similar professional certification preferred.</li></ul>

Job Overview:&nbsp; <ul><li>The Data and Devices Business Unit is looking for R&amp;D Product Development Engineer (PDE) to design and develop high speed cable assembly and connector which are used inside of switches, servers and storage for data communication.&nbsp;</li><li>In this role you will be responsible for the design and documentation of new products, from market definition through production and release, always prioritizing customer requirements and maintaining a customer service mindset.&nbsp;</li><li>You will conceive original ideas for new products/solutions and develop them into practical and economical models.&nbsp;</li><li>You will determine specifications, perform engineering analysis, make preliminary sketches and designs, and coordinate support operations (such as fabrication engineering samples and testing).&nbsp;</li><li>Interaction with customers, vendors, marketing and sales personnel, and other engineering areas during the pre-production stages of new products is also an important part of this role.&nbsp;</li></ul> Responsibilities:&nbsp; <ul><li>Responsible for product development of high-speed cable assembly, connector from market definition through production and release:&nbsp;</li><li>Work closely with the customer and sales/SA/FAE/PM in getting the right and clear VOC (voice of customer) and convert to a design conceptualization and preliminary product specification.&nbsp;</li><li>Conceive concepts and perform feasibility studies.&nbsp;</li><li>Run mechanical and thermal simulations.&nbsp;</li><li>Make the engineering evaluation/proposal to the customer.&nbsp;</li><li>Create the detailed design including 2D/3D drawings and perform DFMEA/tolerance analysis.&nbsp;</li><li>Build prototype samples and perform validation.&nbsp;</li><li>Provide technical support to the Operations team including Quality and Production for efficiency improvement and safe launch.&nbsp;</li><li>Resolve product related issues to closure and manage the ECN/PCN (Engineering Change Notification/ Product Change Notification).&nbsp;</li><li>Build a deep understanding of the market and customer needs by fostering a connection between the business engineering teams and the customer engineering teams&nbsp;</li><li>Maintain a system level understanding of the customer application and the product design/concept necessary for providing a solution to the customers’ expectation.&nbsp;</li><li>Provide technical support to customer, sales, PM and plant teams. Conduct necessary DFMEA, tests, engineering analysis, trouble shooting and verification.&nbsp;</li><li>Work with global manufacturing resources, procurement, and outside suppliers to meet all company technical, quality, and cost objectives.&nbsp;</li><li>Execute technical documentation to fully detail design drawings and requirements, engineering and product change notices, and design history files.&nbsp;</li></ul> Requirements:&nbsp; <ul><li>Bachelor’s degree in Mechanical Engineering or equivalent work experience&nbsp;</li><li>5 years of relevant mechanical engineering work experience with electrical components, electrical devices, mechanical structure design, manufacturing tooling development (stamping, molding, assembly), or manufacturing process development&nbsp;</li><li>Knowledge in socket design, connector design, or other relevant mechanic design and development.&nbsp;</li><li>Familiarity of switch and or server equipment.&nbsp;</li><li>Knowledge in relevant mechanic design and development, including but not limited to, material selection, tolerance analysis, DFMEA, product qualification, etc.&nbsp;</li><li>Proficiency in 3D Design Applications (such as ProE or Spaceclaim)</li><li>Basic knowledge in raw material, industry standard, and product application&nbsp;</li><li>Basic knowledge in manufacturing process (machining, molding, stamping, plating, assembly, etc.)&nbsp;</li><li>Familiarity with quality tools (FMEA, 6sigma, DOE, 8D, etc.)&nbsp;</li><li>Fluent in English (both verbal and written) to facilitate global communication both internally and with external customers.&nbsp;</li><li>Ability to work in a global environment – able to accommodate varying time zones and capable of collaborating with individuals across geographies.&nbsp;</li><li>Open minded, coachable, willing to learn new skills, and motivated to grow.&nbsp;</li><li>This role emphasizes designing products that align closely with customer requirements, maintaining a proactive customer service mindset throughout the development process.&nbsp;</li></ul>

Job Overview:&nbsp; <ul><li>As a Senior Signal Integrity Engineer in the Signal Integrity team you will focus on working with customer to understand their SI requirement and collaborate with internal product team to work out cable/connector solution to satisfy customer SI requirement.&nbsp;</li><li>Targeting high speed communications and connectivity within datacenters and wireless infrastructure.&nbsp;</li><li>You will be expected to independently work on projects in the areas of signal integrity for product and system design including modeling, simulation, testing and circuit board layout.&nbsp;</li><li>You will work collaboratively within a broader cross functional team of mechanical, manufacturing, &amp; operations to execute leading edge products designs.&nbsp;</li><li>You will be the subject matter expert for the signal integrity performance of a product/platform beginning with the initial analysis through prototype fabrication &amp; evaluation, and production verification testing with customer projects. You will tackle challenging design problems and utilize simulation tools to guide complex designs toward success.&nbsp;</li></ul> Responsibilities:&nbsp; <ul><li>Establishing signal integrity design performance/functional requirements with customer for new products&nbsp;</li><li>Performing signal integrity simulations for multiple high-speed standards on each product. This includes determining the correct simulation methodology and setup to use, as well as a good understanding of the criteria for each interface.&nbsp;</li><li>Performing PCB design schematic and layout reviews&nbsp;</li><li>This role emphasizes designing products that align closely with customer requirements, maintaining a proactive customer service mindset throughout the development process.&nbsp;</li><li>Present and demonstrate SI performance of product to customer.&nbsp;</li><li>Engaging customer SI engineer to collect SI requirement for new project.&nbsp;</li><li>Collaborate with internal team to Solve SI issue at customer side.&nbsp;</li></ul> Requirements: <ul><li>Bachelor’s degree in Electrical Engineering&nbsp;</li><li>Minimum of 5 years of work experience in a signal integrity engineering role&nbsp;</li><li>Experience with interconnect design or experience with connector &amp;/or cable/cable assembly design (high speed twinax cables, direct attach copper (DAC) cables)&nbsp;</li><li>Signal integrity analysis tools (Agilent ADS, Ansys HFSS or equivalent)&nbsp;</li><li>A solid understanding of electromagnetic theory and electrical circuit behavior&nbsp;</li><li>Strong analytical capabilities to interpret simulation and lab data to identify issues and provide solutions to fix identified problem. • Familiarity with printed circuit board design, fabrication and assembly.&nbsp;</li><li>Excellent verbal and written communication skills&nbsp;</li><li>Ability to work in a global environment – able to accommodate varying time zones, fluent in English (verbal/written), able to collaborate with individuals across geographies&nbsp;</li><li>Individual must be highly motivated, a quick learner, and able to work independently&nbsp;</li></ul>

Job Overview: <ul><li>As a Sr. Product Dvl Engineer in the Signal Integrity team you will focus on the electrical design, simulation, and verification-validation testing of high speed products in the connector and/or cable assembly, radio system industry—</li><li>targeting high speed communications and connectivity within datacenters and wireless infrastructure.&nbsp;</li><li>You will be expected to independently work on projects in the areas of signal integrity for product and system design including modeling, simulation, testing and circuit board layout.&nbsp;</li><li>You will work collaboratively within a broader cross functional team of mechanical, manufacturing, &amp; operations to execute leading edge products designs.&nbsp;</li><li>You will be the subject matter expert for the signal integrity performance of a product/platform beginning with the initial analysis through prototype fabrication &amp; evaluation, and production verification testing. You will tackle challenging design problems and utilize simulation tools to guide complex designs toward success.&nbsp;</li></ul> Responsibilities:&nbsp; <ul><li>Subject matter expert in signal integrity design, simulation and validation activities through product development cycles&nbsp;</li><li>Establishing signal integrity design performance/functional requirements for new products&nbsp;</li><li>Performing signal integrity simulations for multiple high-speed standards on each product.&nbsp;</li><li>This includes determining the correct simulation methodology and setup to use, as well as a good understanding of the criteria for each interface.&nbsp;</li><li>Performing PCB design schematic and layout reviews&nbsp;</li><li>Creating actionable recommendations based upon design reviews and simulation results&nbsp;</li><li>Guiding connector design and component qualifications from a signal integrity standpoint.&nbsp;</li><li>Making data driven decisions about the product functionality and areas for improvement.&nbsp;</li></ul> Requirements:&nbsp; <ul><li>Bachelor’s degree in Electrical Engineering or equivalent work experience&nbsp;</li><li>5+ years of relevant work experience in electrical design, RF design, or PCB design&nbsp;</li><li>Proficient with signal integrity analysis tools (Agilent ADS, Ansys HFSS, CST, or equivalent tools)&nbsp;</li><li>A solid understanding of electromagnetic theory and electrical circuit behavior&nbsp;</li><li>Strong analytical capabilities to interpret simulation and lab data to identify issues and provide solutions to fix identified problem.&nbsp;</li><li>Familiarity with printed circuit board design, fabrication and assembly.&nbsp;</li><li>Fluent in English (both verbal and written) to facilitate global communication both internally and with external customers.&nbsp;</li><li>Ability to work in a global environment – able to accommodate varying time zones and capable of collaborating with individuals across geographies.&nbsp;</li></ul>

Job Overview: <ul><li>As a Sr. Product Dvl Engineer in the Signal Integrity team you will focus on the electrical design, simulation, and verification-validation testing of high speed products in the connector and/or cable assembly, radio system industry—</li><li>Targeting high speed communications and connectivity within datacenters and wireless infrastructure.&nbsp;</li><li>You will be expected to independently work on projects in the areas of signal integrity for product and system design including modeling, simulation, testing and circuit board layout.&nbsp;</li><li>You will work collaboratively within a broader cross functional team of mechanical, manufacturing, &amp; operations to execute leading edge products designs.&nbsp;</li><li>You will be the subject matter expert for the signal integrity performance of a product/platform beginning with the initial analysis through prototype fabrication &amp; evaluation, and production verification testing. You will tackle challenging design problems and utilize simulation tools to guide complex designs toward success.&nbsp;</li></ul> Responsibilities:&nbsp; <ul><li>Subject matter expert in signal integrity design, simulation and validation activities through product development cycles&nbsp;</li><li>Establishing signal integrity design performance/functional requirements for new products&nbsp;</li><li>Performing signal integrity simulations for multiple high-speed standards on each product. This includes determining the correct simulation methodology and setup to use, as well as a good understanding of the criteria for each interface.&nbsp;</li><li>Performing PCB design schematic and layout reviews&nbsp;</li><li>Creating actionable recommendations based upon design reviews and simulation results&nbsp;</li><li>Guiding connector design and component qualifications from a signal integrity standpoint. Making data driven decisions about the product functionality and areas for improvement.&nbsp;</li></ul> Requirements:&nbsp; <ul><li>Bachelor’s degree in Electrical Engineering or equivalent work experience&nbsp;</li><li>5+ years of relevant work experience in electrical design, RF design, or PCB design&nbsp;</li><li>Proficient with signal integrity analysis tools (Agilent ADS, Ansys HFSS, CST, or equivalent tools)&nbsp;</li><li>A solid understanding of electromagnetic theory and electrical circuit behavior&nbsp;</li><li>Strong analytical capabilities to interpret simulation and lab data to identify issues and provide solutions to fix identified problem.&nbsp;</li><li>Familiarity with printed circuit board design, fabrication and assembly.&nbsp;</li><li>Fluent in English (both verbal and written) to facilitate global communication both internally and with external customers.&nbsp;</li><li>Ability to work in a global environment – able to accommodate varying time zones and capable of collaborating with individuals across geographies.&nbsp;</li><li>Individual must be highly motivated, a quick learner, and able to work independently&nbsp;</li></ul>

Responsibilities:&nbsp; Responsible for product development of socket, high-speed connector, and cable assembly solutions from market definition through production and release:&nbsp; <ul><li>Work closely with the customer and TE sales/SA/FAE/PM in getting the right and clear VOC (voice of customer) and convert to a TE design conceptualization and preliminary product specification.&nbsp;&nbsp;</li><li>Conceive concepts and perform feasibility studies.&nbsp;</li><li>Run mechanical and thermal simulations.&nbsp;</li><li>Make the engineering evaluation/proposal to the customer.&nbsp;&nbsp;</li><li>Create the detailed design including 2D/3D drawings and perform DFMEA/tolerance analysis.&nbsp;</li><li>Build prototype samples and perform validation.&nbsp;&nbsp;</li><li>Complete product qualification and finalize product specification.&nbsp;</li><li>Provide technical support to the Operations team including Quality and Production for efficiency improvement and safe launch.&nbsp;</li><li>Resolve product related issues to closure and manage the ECN/PCN (Engineering Change Notification/ Product Change Notification).&nbsp;</li><li>Build a deep understanding of the market and customer needs by fostering a connection between the business engineering teams and the customer engineering teams&nbsp;</li><li>Maintain a system level understanding of the customer application and the product design/concept necessary for providing a solution to the customers’ expectation.&nbsp;&nbsp;</li><li>Follow the LEANPD Project Process to support the project team from the product development engineering (PDE) perspective to complete the new product development project on time, quality and budget.&nbsp;</li><li>Drive the development and release of product, scale-up through stage-gate reviews, ensuring milestone commitments are maintained.&nbsp;</li><li>Provide technical support to customer, sales, PM and plant teams.&nbsp;</li><li>Conduct necessary DFMEA, tests, engineering analysis, trouble shooting and verification.&nbsp;&nbsp;</li><li>Work with global manufacturing resources, procurement, and outside suppliers to meet all TE technical, quality, and cost objectives.&nbsp;</li><li>Execute technical documentation to fully detail design drawings and requirements, engineering and product change notices, and design history files.&nbsp;</li></ul> Requirements: <ul><li>Bachelor’s degree in mechanical engineering or equivalent work experience.&nbsp;</li><li>Generally requires 5 years of relevant mechanical engineering work experience with electrical components, electrical devices, mechanical structure design, manufacturing tooling development (stamping, molding, assembly, plating), or manufacturing process development.&nbsp;</li><li>Knowledge in socket design, connector design, cable assembly design, or other relevant mechanic design and development, including but not limited to, material selection, tolerance analysis, DFMEA, product qualification, etc. </li><li>Proficient in 3D CAD applications (Creo preferred) with experience in 3D solid&nbsp;modeling including sheet metal, 2-D drawings, PDM link Data Manager and general knowledge in design applications such as Spaceclaim, Solidworks, or others used only in the concept stage.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>Proficient in geometric dimensioning &amp; tolerancing (GD&amp;T).&nbsp;&nbsp;</li><li>Occasional user of finite element analysis software (Ansys, Workbench).&nbsp;</li><li>Proficient in developing and writing design objectives for product specifications.&nbsp;</li><li>Basic knowledge in manufacturing process (machining, molding, stamping, plating, assembly, etc.).&nbsp;</li><li>Fluent in English (both verbal and written) to facilitate global communication both internally and with external customers.&nbsp;</li></ul>

Responsibilities: <ul><li>Responsible for product development of socket, high-speed connector, and cable assembly solutions from market definition through production and release:</li><li>Work closely with the customer and company Product Managers/Sales/Field Application Engineers in getting the right and clear VOC (voice of customer) and convert to a company design conceptualization and preliminary product specification.&nbsp;</li><li>Conceive concepts and perform feasibility studies.</li><li>Run mechanical and thermal simulations.</li><li>Make the engineering evaluation/proposal to the customer.&nbsp;</li><li>Create the detailed design including 2D/3D drawings and perform DFMEA/tolerance analysis.</li><li>Build prototype samples and perform validation.&nbsp;</li><li>Complete product qualification and finalize product specification.</li><li>Provide technical support to the Operations team including Quality and Production for efficiency improvement and safe launch.</li><li>Resolve product related issues to closure and manage the ECN/PCN (Engineering Change Notification/ Product Change Notification).</li><li>Build a deep understanding of the market and customer needs by fostering a connection between the business engineering teams and the customer engineering teams.</li><li>Maintain a system level understanding of the customer application and the product design/concept necessary for providing a solution to the customers’ expectation.&nbsp;</li><li>Follow the LEANPD Project Process to support the project team from the product development engineering (PDE) perspective to complete the new product development project on time, quality and budget.&nbsp;</li><li>Drive the development and release of product, scale-up through stage-gate reviews, ensuring milestone commitments are maintained.</li><li>Provide technical support to customer, sales, PM and plant teams. Conduct necessary DFMEA, tests, engineering analysis, trouble shooting and verification.&nbsp;</li><li>Work with global manufacturing resources, procurement, and outside suppliers to meet all company technical, quality, and cost objectives.</li><li>Execute technical documentation to fully detail design drawings and requirements, engineering and product change notices, and design history files.</li></ul> Requirements: <ul><li>Bachelor’s degree in Mechanical Engineering or equivalent work experience.</li><li>12+ years of relevant mechanical engineering work experience with electrical components, electrical devices, mechanical structure design, manufacturing tooling development (stamping, molding, assembly,plating), or manufacturing process development.</li><li>Knowledge in socket design, connector design, or other relevant mechanical design and development.</li><li>Knowledge in relevant mechanical design and development, including but not limited to, material selection, tolerance analysis, DFMEA, product qualification, etc.&nbsp;</li><li>Expert in 3D Design Applications (such as Creo, Spaceclaim, etc.)</li><li>Proficient in geometric dimensioning &amp; tolerancing (GD&amp;T). Proficient at limit and fit analysis including statistical tolerance analysis.</li><li>Proficient user of finite element analysis software (Ansys, Workbench) including elastic and plastic behavior of metals.</li><li>Proficient in developing and writing design objectives for product specifications</li><li>In depth knowledge in manufacturing process (machining, molding, stamping, plating, assembly, etc.) with experience driving Design for Manufacturing (DFM)&nbsp;&nbsp;&nbsp;</li><li>Fluent in English (both verbal and written) to facilitate global communication both internally and with external customers.</li><li>Ability to work in a global environment – able to accommodate varying time zones and capable of collaborating with individuals across geographies.</li><li>Advanced problem solver – able to handle moderate complexity situations and use data analytics and critical thinking to reach logical conclusions with limited direction</li><li>8+ years of relevant mechanical engineering work experience with electrical components, electrical devices, mechanical structure design, manufacturing tooling development (stamping, molding, assembly,plating), or manufacturing process development</li><li>Proficient in 3D Design Applications (such as Creo, Spaceclaim, etc.)</li><li>Proficient in geometric dimensioning &amp; tolerancing (GD&amp;T).&nbsp;</li><li>Occasional user of finite element analysis software (Ansys, Workbench)</li><li>Proficient in developing and writing design objectives for product specifications</li><li>Basic knowledge in manufacturing process (machining, molding, stamping, plating, assembly, etc.) with experience driving Design for Manufacturing (DFM)</li></ul>

Responsibilities: <ul><li>Manages the Advance Manufacturing Process (AMP*) team in Asia Pacific comprised of experienced professionals and/or supervisors who exercise latitude and independence in their assignments.&nbsp;</li><li>Develops the organization to support AMP operational strategy, defines and implements operational plans, and has measurable impact on operating efficiencies and organizational objectives.</li><li>Responsible for project and compliance, assessing risk and compliance across the AMP function.&nbsp;</li><li>Analyzes and plans work force utilization, space requirements, and workflow, and designs layout of equipment and workspace for maximum efficiency.&nbsp;</li><li>Develops and administers schedules and performance requirements and have budget planning and management responsibilities.&nbsp;</li><li>Performs staff responsibilities, including interviewing and performance management.&nbsp;</li><li>Builds and grow individuals and teams.</li><li>Frequently interacts with multiple organizational levels and interactions normally require the ability to gain cooperation of others.&nbsp;</li><li>Provides strategic leadership to foster growth of the business.&nbsp;</li><li>Provides input on resolving key issues that directly impact the AMP function.&nbsp;</li><li>Works on issues of diverse scope where analysis of situation or data requires evaluation of a variety of factors, including an understanding of current business trends.&nbsp;</li><li>Determines best course of action to meet schedules and/or resolve technical problems.&nbsp;</li><li>Adapts/makes departures from traditional approaches to enhance quality or value in existing methods.&nbsp;</li></ul> Requirements: <ul><li>Minimum 12 years of related experience.</li><li>Bachelor’s Degree (Mechanical Engineering or related) required, Master’s preferred.</li><li>Broad Management, Technical and Project Experience with Deep Knowledge in Advance Manufacturing Process (* Manufacturing technology/capabilities development for Stamping, Plating, Assembly, Molding).</li><li>Fluent in English/Mandarin (read, write, and speak) is a must.</li><li>Competent knowledge with quality tools (FMEA, Six Sigma, DOE, 8D/Continuous Improvement), is a plus!</li><li>Broad project management process skill and experience</li><li>Practical application of MS Office software (Word, Excel, PPT, Project, &amp; Outlook).&nbsp;</li><li>Based in China-Qingdao mfg. site and willingness to travel up to 25% average.</li></ul>

Skills

Industry

Location

Jobtitle

67 promo evaluation Jobs found

Staff R&D/Product Development Engineer

ASC - Instructional Designer

Product Engineering Manager

Staff Product Engineer

Sr. R&D Product Development Engineer

Sr. R&D Product Development Engineer

Sr R&D/Product DVL Engineer - CPU Socket

Sr R&D/Product DVL Engineer

Staff R&D/Product DVL Engineer

Manager II, MPDE

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

67 promo evaluation Jobs found

Staff R&D/Product Development Engineer

ASC - Instructional Designer

Product Engineering Manager

Staff Product Engineer

Sr. R&D Product Development Engineer

Sr. R&D Product Development Engineer

Sr R&D/Product DVL Engineer - CPU Socket

Sr R&D/Product DVL Engineer

Staff R&D/Product DVL Engineer

Manager II, MPDE

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.