Manufacturing Engineer(Molding)

Process Quality Manager

Product specialist

Talent Acquisition Specialist

Senior Project Manager Engineer 

Plating Manufacturing Engineer

Cable Assembly - Senior MPD Engineer 

MGR II Laboratory

Quality Engineer

Staff Manufacturing & Process Development Engineer – Stamping

Responsibilities: <ul><li>Participate in oversea transfer program and ensure molding machines, mold tooling’s and processes are installed and qualified promptly for production.</li><li>Initiate tooling, process and quality improvements to improve productivity.</li><li>Assist production and quality departments in analyse and troubleshooting to achieve good quality products.</li><li>Provide Engineering support to the production team during new product start-up and initial production.</li><li>Provide cost estimates for new of molding projects / tooling’s to the Project Management Team for project cost simulation.</li><li>Perform DFM (design for manufacturability) on new products, participate in the concept development of molds, automations and manual processes.</li><li>Standardize, improve tool design to achieve optimized lead-time, cost and safety requirement.</li><li>Carry out qualification tests on molds, machine and manual process</li><li>Ensure that all production machines, tooling and equipment which are being procured, installed and qualified promptly for production.</li><li>Investigate identify root causes and establish Corrective, Preventive Plan with effectiveness</li><li>Participate in Process FMEA and Design FMEA</li><li>Create and maintain mold drawings, standard work for the production.</li><li>Train and guide Mold Technicians in Mold maintenance and setup.</li><li>Participate in 6-Sigma projects, Kaizen events and other Improvement activities.</li><li>Perform any other duties which may be needed by the company related to engineering and production matters.&nbsp;</li><li>Assist production and quality departments in analyses and troubleshooting to achieving good quality products.</li><li>Initiate and implement programs such as continuous improvements, scrap reduction, cost reduction of raw material, cycle time reduction.</li><li>Provide Engineering support to the production team during new product start-up and initial production.</li><li>Perform DFM, provide concept development, cost estimates for new molding tools to the Project Management Team for project cost simulation.</li><li>Develop and optimize new product manufacturing process.</li><li>Follow company specifications and comply with environmental management system’s procedures.</li><li>Follow company WSH specifications and procedures and ensure that staffs comply.</li></ul> Requirements: <ul><li>Degree or Diploma in Mechanical / Production Engineering.</li><li>2-3 years relevant working experience in a Manufacturing environment.</li><li>Familiar with Pro-E (Creo), SolidWorks or AUTOCAD.</li><li>Good knowledge in design &amp; development of Injection molds.</li><li>Good knowledge in tool making, tool-steel application / selection and heat treatment process.</li><li>Familiar with Molding automation process.</li></ul>

Responsibilities: Goal Setting <ul><li>Production area Key performance setting base on Quality strategy</li><li>To let each engineer clear understand own KPI and dedicate to quality improvement toward to corporate strategy</li></ul> Customer Complaint handling <ul><li>Review 8D report, monitor customer complaint quantity, response time, 8D score, and improvement effectiveness.</li><li>To improve customer satisfaction and compliance the strategy to ECE</li></ul> COPQ Reduction <ul><li>Direct and support to analysis the production data, find the quality improvement opportunity and lead team to determine the actions, follow up and verify the improvement result, take</li><li>reaction base on the actual result.</li><li>To control scrap cost and continue improvement process quality to contribute cost saving.</li></ul> CIP <ul><li>Review historical data to identify CIP projects, and follow up the progress.</li><li>To continual reduce COPQ and prevent customer complaint as well as efficiency improvement.</li></ul> Audit supports <ul><li>Coordinate and support external and internal audits, communicate about audit findings and lead the corrective actions where appropriate to ensure that audits are completed in a timely</li><li>manner</li></ul> People Management <ul><li>Allocate work across direct reports; monitor and review their performance; mentor, coach and motivate them; and help resolve people/functional issues to achieve the targeted team</li><li>performance and retain talent</li></ul> Lesson learn <ul><li>Share experience with team to prevent potential quality risk.</li></ul> Requirements: Education:&nbsp; <ul><li>Bachelor degree or above in Mechanical, Electronics or relevant&nbsp;</li></ul> Qualification &amp; Certification: <ul><li>APQP, PPAP, FMEA, SPC, MSA certification;</li></ul> Experience: <ul><li>More than 5 years of working experience in quality process management, Automotive experience must be.&nbsp;</li></ul> Technical Skill &amp; Competencies: <ul><li>Master APQP, PPAP, FMEA, SPC, MSA,8D.&nbsp;</li><li>Process audit and product audit skills</li><li>Familiar with ISO9001, IATF16949</li><li>Familiar with 8D method</li><li>Familiar with special characteristic symbol requirements</li><li>Proficient in written and oral English</li><li>Good communication skill, integrity, accountability, logical, self-motivated, ability to work under pressure</li><li>Good interpersonal skill</li></ul>

Responsibilities:&nbsp; <ul><li>Provide technical and commercial support to internal (sales, product management production, and engineering) and external customers for all the Smart Grid/Grid Monitoring Solutions Products.</li><li>Interpret customers specifications to select or create the correct TE Smart Grid/Grid Monitoring Solutions Product for their application and provide technical product support.</li><li>Support developing specifications and sales support materials including but not limited to installation instructions, data sheets, cross references, etc.</li><li>Coordinate prototypes for testing with engineering and provide technical assistance to design feasibility and work with the Product Manager to make recommendations for necessary changes.</li><li>Manage new part number creation process for Smart Grid/Grid Monitoring Solutions Products.</li></ul> Requirements: Education &amp; Experience: <ul><li>Bachelor’s in electrical engineering, Power Systems, or a related field.</li><li>3+ years of experience in a product management, technical support, manufacturing engineering, application engineering, and/or technical sales, preferably in power grids, smart grids, or electrical distribution.</li></ul> Technical Skills: <ul><li>Required: Strong technical understanding of electrical engineering principles and applications.</li><li>Preferred: Knowledge of power grids and distribution grids.</li><li>Preferred: Understanding of smart grids, and grid monitoring. Other Skills &amp;</li></ul> Competencies: <ul><li>Driven to identify and resolve issues</li><li>Excellent communication and stakeholder management abilities.</li><li>Ability to work cross-functionally with engineering, sales, and product teams. • Bilingual English / Spanish is a plus</li></ul>

Responsibilities: <ul><li>Manage the recruitment process end to end.</li><li>Keep an overview of the recruitment needs via regular meetings with Hiring Managers.</li><li>Design job descriptions and interview questions that reflect the position’s requirements and attract talent to the company.</li><li>Determining selection criteria for the open positions, in line with the company-culture and strategy.</li><li>Collaborate with HR team coherently to align talent acquisition with overall business goals.</li><li>Sourcing of potential candidates through different sourcing channels.</li><li>Screening of potential candidates and planning interviews and assessments.</li><li>Track &amp; report on talent acquisition metrics to measure the effectiveness of recruitment strategies.</li><li>Run regular updates to hiring managers.</li><li>Will need to make presentations to senior management.</li><li>Organize and lead feedback sessions and coordinate the hiring decision.</li><li>Proposing employment offers in line with company guidelines.</li><li>Run reference checks when needed.</li><li>Ensure that the recruitment process is efficient, effective and equitable.</li><li>Implement employer branding initiatives, both internally and externally.</li><li>Organize and attend job fairs and recruitment events.</li><li>Foster long-term relationships with candidates.</li><li>Conduct Hiring manager and Brand ambassador workshops.</li><li>Maintain strong connections with HR colleagues within company to share best practices.</li></ul> Requirements: <ul><li>Candidate should come with strong overall Human Resource experience in FMCG.</li><li>Good knowledge and experience in end to end recruitment.</li><li>Candidates coming with regional experience in HR is a plus.</li><li>Experience in stakeholder management.</li><li>Familiarity with social media, resume databases and professional networks.</li><li>Experience with headhunting for mid to senior positions.</li><li>Hands-on experience with full-cycle recruiting using interview techniques.</li><li>Strong communication and good relationship building skills.</li><li>Passion and desire to make a difference.</li></ul>

Responsibilities: Project Timeline: <ul><li>Identify/align projects goals and scope with PJM and PM, breakdown tasks of tooling/process developments and qualification</li><li>Make/align tooling development and qualification timeline, assign tasks to Ops team include tooling development, materials purchase</li><li>Track and manage project team to execute project progress based on committed project schedule</li></ul> Project Cost: <ul><li>Lead Ops to simulate sample cost and production cost to achieve project landing zone target, lead Ops to optimize launch cost to the best</li><li>Budget and control scrap cost through leverage design and manufacturing process to meet project target during NPI phase</li></ul> Project Execution: Guide capacity planning, materials sourcing, and manpower to support all builds in the plant.<ul><li>Oversee the progression of tooling/process development, identify bottleneck and issues, organize Ops team to improve those bottleneck and issues.</li><li>Oversee risks assessment in project execution, stay interlock with PJM to make mitigation plan and conduct the planned activities in Ops.</li><li>Finalize the Safe Launch plan for the appropriate mix of product, tool capability and demand with the approval of the PjM, Quality, MDPE, and PjE. a.&nbsp;&nbsp;Lead Safe Launch team meetings to assure successful HVM startup and manufacturing process qualification for attainment of required metrics for successful&nbsp;G5 handoff.</li><li>Align the budget with Ops team with the tooling list provided by MPDE-A, control total capital spending against CER.</li><li>Lead and coordinate line setup to conduct LVM sample builds and coordinate HVM tool builds.</li><li>Lead Ops to make ramp up plan, include materials, operations and tool capacity ramp up, ensure manufacture team take over production control smoothly after G5.</li></ul> Product Sustaining: <ul><li>Product migration, as a receiving or sending leader to execute product move in or move out, including project timeline, investment, cost control, machine/material/manpower preparation, safety stock, safe launch, etc.</li><li>Lead product capacity analysis and expand it through re-investment per estimation.&nbsp;</li></ul> Policies and Procedures: <ul><li>Provide guidance to new coming engineers or junior engineers.</li></ul> Requirements: <ul><li>Bachelor’s degree, engineering background is preferred</li><li>PMP certification preferred</li><li>At least 8 years related working experience in project management, 3~5 years’ experience&nbsp;in connector/cable/cable assembly is a plus</li><li>Fluent oral and written/reading in English.</li></ul>

Responsibilities: <ul><li>According to product drawings and project requirements, make and submit project-related plan information.</li><li>According to the NPI project progress plan, design the plating process flow, complete the production of plating samples, and submit to FAA.</li><li>Coordinate the design review, changes and improvements related to the project and correct the defects and deficiencies in the design.</li><li>Tackle the technical problems of equipment and fixtures in the production process and make suggestions for improvement.</li><li>Complete the relevant documents and operating specifications required for mass production to meet the guiding conditions required for formal production.</li><li>Lead the improvement of the existing process technology and actively promote the lean management model to ensure the department can achieve KPI indicators.</li><li>Analyze and control production parameters and material consumption and provide relevant technical support for various improvements.</li></ul> Requirements: <ul><li>Bachelor’s degree or above, applied chemical engineering or chemical engineering related major.</li><li>More than three years of working experience in plating process.</li><li>Have good communication skills, teamwork spirit and analysis ability of difficult problems.</li><li>English CET-4 or above</li></ul>

Responsibilities: Manufacturing Process Development: <ul><li>Define, review and confirm the entire manufacturing process from start to finish.</li><li>Coordinate Design for Manufacturing (DFM) review, and initiate Process Failure Modes and Effects Analysis (PFMEA) with core team members.</li><li>Prepare documentations and process specifications for production.</li><li>Lead team in identification, tracking and resolution of engineering issues using the Failure Analysis and Corrective Action (FACA) form.</li><li>Continuous manufacturing process improvement with company OA tools for cost reduction.</li></ul> Assembly Tool, Fixture and Equipment Development: <ul><li>Evaluate new tool, fixture, and equipment demand/cost for new projects.</li><li>Design and review the tool, fixture and equipment with core team members meeting company engineering and EHS requirement.&nbsp;</li><li>Upload all tooling prints to company data management system(DM.TEC, PDMLink, etc.)</li><li>Discuss and review details of tool/fixture/equipment with outside supplier.</li><li>Follow up the purchasing process to fabricate new tool/fixture/equipment.</li></ul> Qualification for Manufacturing process, Tool, Fixture, and Equipment: <ul><li>Condition all tool, fixture and equipment, lead the tool/fixture/equipment qualification by running samples or LVM.&nbsp;</li><li>Follow up the documentations for qualification, using company standard format and follow up the approval.</li><li>Coordinate pilot run for new products and solve engineering issues, make sure the manufacturing process capability meet engineering, quality and customer requirement.</li></ul> Technician Guidance: <ul><li>Coach, train and develop operator and technician in order to ensure their technique could be succeed and get continuous upgraded.</li></ul> Requirements: <ul><li>Bachelor degree or above. Mechanism engineering related background. </li><li>5 years’ working experiences in related field.</li><li>Good coordination and communication skill, accountability, integrity, customer focus.</li></ul>

Responsibilities: Undertake overall Responsibility:&nbsp; <ul><li>Manage in FA function and leading modern technology to coordinating with engineering to develop core Tech and able to expand to lab levels for daily delegated tasks to manage the related database consolidation.&nbsp;</li><li>Driving with company OA improvement on process or capability improvement to make lab goals achieved and support engineering to win in markets.&nbsp;</li></ul> Responsible for Strategy:&nbsp;&nbsp; <ul><li>Set clear FA direction goals and develop strategies with high-level visions that reframes what winning looks like and approaches to fulfil modern technology assignments in creative and meaningful ways.</li><li>Providing strategy for FA/Lab directions align with organization value drivers and tactics to key program execution with excellence and flexible. </li><li>Such as Identify FA team with right size, people skills and address technical assistance to design feasibility and make recommendations for necessary changes.</li><li>Transform stakeholders need and assess FA/Lab capability tried-and-true options for scenarios allocate resources to high priorities (people, cost $, management attention, sustainability etc) to significantly shorten the product design cycle and help bring products to market faster while ensuring high quality and performance. </li><li>also sorts of possibilities to creating an optimal flow to shaping up team to be more engaging and easier to follow.</li><li>With financial knowledges to assess capability and predict organization forecast and analysis per budget scope, and build long-term constructive common ground network across the adjacent functions such as Product Engineering, Project Engineering and Field Application Engineering etc.&nbsp;</li><li>Align organization culture targeting and systematically pursuing specific areas for further secure lab competitiveness, i.e. (Software/ System/CoE/ 3DP/New Tech etc)&nbsp;</li></ul> Responsible for lab strategy mobilization and execution: <ul><li>Communicate and distribute the requirements per lab programs implementation keeps FA/Lab ahead of or at pace with the competition,</li><li>Boost and Outline the necessary investment plan of amount, relevance and quality of test equipment in FA/lab, driving efficiency to maximize value and return on investment.</li><li>Create and use systems for monitoring and manage various performance in FA function OKR/KPIs to process control and follow up and streamline the process and balance of stability and agility that maximizes the speed and effectiveness by using digital data-driven techniques, show diagram visually.</li><li>Broad knowledge to develop FA/Test/3DP etc method per core technology to foster FA/lab growing, and design new correction/prevention quality initiatives to pinpoint the risks and minimize lab operation obstacles, build resilience ahead of any potential crises and update risk assessments so that enable lab able to mitigate the impact and unlock opportunities.</li><li>Define FA/Lab operation mechanism, criteria, and management discipline to ensure FA/Lab for daily work what is in good working order.</li><li>Leading Team use data to make timely decisions.&nbsp;</li><li>Research new development method and set guidelines enables engineering/manufacturers to better process control and maintain quality within acceptable limits to prevent failure in early stage, approaching smart tech to accelerate the testing,inspection and analysis activities,&nbsp;</li></ul> Succession Talent Effectiveness:&nbsp; <ul><li>Identify key talents per OLR and drive team and equip team development goals to ensure most value-creating roles in lab filled with right position.</li><li>Capable with management skills to prepare effective office support in place, such as Give Training and properly communicate findings so as to help team to continuously improving their abilities to ensure lab organization successfully and sustainable as whole team can do or to achieving next level."</li></ul> Requirements: <ul><li>Master’s degree or above level of qualification in Engineering technology areas</li><li>Minimum 8+years of similar industry Engineering field and for management, English listening, speaking, writing ability are required.</li><li>Experience in technical technology on validation test, Failure Analysis, or 3D printing, tool application or system Engineering preferred.</li><li>Proactive oriented and tenacity to results driven.</li><li>practitioner well on logic and structure skills</li><li>Manager level experiences with ISO/IEC 17025 lab system standards and engineering skills</li><li>Demonstrated ability in conducting audits and all aspects of communication, collaboration and team building skills.</li><li>Proficient ability in developed the new tech to reduce redundant testing or inspection activities, or experience for new program/project boosting and launch preferred.</li><li>Outstanding engineering background and Test field for now organization management and with software capabilities would prefer.</li></ul>

Responsibilities: Quality Documents Preparation and Revise. DQIP Workmanship Control Plan: <ul><li>Identify the key process basing on quality control and assure process quality.</li><li>Prepare DQIP, workmanship and Control Plan, and quality control document according to procedure.</li></ul> Setup &amp; FAAR: <ul><li>Basing on product, Process and procedure, review and approve Setup and FAAR report.</li></ul> MSA (GRR), gage: <ul><li>Do assessment on product and measurement tool, prepare MSA (GRR) report. </li><li>Calibrate the inspection equipment as gage and process inspection machine to assure the efficiency.</li></ul> PFMEA: <ul><li>Assure the process risk control basing on efficient PFMEA.</li></ul> NCR &amp; QA instruction: <ul><li>NCR&amp; QA instruction prepare and confirmation, assure the good control on non-confirming parts.</li></ul> Customer Quality: <ul><li>Fast response for customer complaints to drive customer satisfaction</li><li>Drive internal improvement and expansion based on customer complaints</li><li>8D report prepare and TECHS system handling.</li></ul> Process Improvement: <ul><li>In association with engineering department and production department to identify and analyze problems of production process, find out the root cause of failures.</li><li>Do process capability analysis and defect statistic analysis, to increasing the product &amp; process quality</li><li>NPI product and process study to assure the NPI goes well on quality control.</li><li>Engage process improvement, confirm implementing and tracking effects and results.</li></ul> Training: <ul><li>Providing practical training to QC and operators</li><li>Quality Improvement Summary and Sharing</li></ul> Requirements: Education, Technical Qualification &amp; Experience: <ul><li>Bachelor’s degree in technical or related major.&nbsp;</li><li>Minimum 1 year working experience in Quality management， connector working experience preferred.</li><li>English can be working language</li><li>SA、SPC、FACA, Familiar with quality management tools, such as MSA, SPC, FACA etc</li><li>Personal Attributes &amp; Competencies</li><li>Integrity; Accountability; Communication; Outgoing.</li><li>Good capability of logical thinking, self-study and independent problem solving</li></ul>

Responsibilities: <ul><li>Has strong impact in Advanced Manufacturing Technology Roadmap driven development projects.</li><li>Drives for excellence in existing Stamping technologies and methods.</li><li>Strives to implement optimized or new manufacturing technologies to provide improved processes and tolerance control.</li><li>Act as a liaison between the Advance Manufacturing Process team and the manufacturing sites teams to collaborate with Product Development in the optimization of part and product</li><li>Designs for manufacturability, providing stamping process expert knowledge and general knowledge of stamping processes to realize product samples and prototypes.</li><li>Provides stamping process expert knowledge and general knowledge and project management to liaise the Advance Manufacturing Process team and the manufacturing sites teams,</li><li>deploying optimized or new stamping processes to realize advanced manufacturing technology development projects.</li><li>Acts as the binding element between product development and advanced manufacturing &amp; process engineering, ensuring the effectiveness and efficiency of this critical interface.</li><li>Designs, develops, and qualifies stamping processes in compliance with company EH&amp;S, quality and production standards, as well as recognized best in class and industry standards.</li><li>Documents all related processes in applicable company systems.</li><li>Supports supply chain to verify related suppliers’ compliance and capability.</li><li>Initiates and implements stamping related programs to continuously improve quality, cost and cycle time.</li><li>Maintains and adheres to all appropriate specifications, regulatory and customer requirements.</li><li>Applies stamping process expertise to resolve significant / unique / complex issues, where analysis of situations or data requires an in-depth evaluation of variable factors.</li><li>Exercises considerable latitude in determining objectives and approaches to assignment, performing work without appreciable direction.</li><li>Drives results primarily through collaboration and influence, not through direct reporting relationships.</li><li>Provides training and mentorship to other professional employees.</li><li>Provides measurable input to the objectives and goals of the department in support of the function and business unit strategies.</li></ul> Requirements: <ul><li>Minimum 8 years of related experience.</li><li>Bachelor’s Degree (Mechanical Engineering or related) required, Master’s preferred.</li><li>Demonstrates stamping process expertise (process optimization, capability, troubleshooting)</li><li>Tight tolerance electrical connector experience is a plus!</li><li>Working knowledge with quality tools (FMEA, Six Sigma, DOE, 8D/Continuous Improvement), is a plus!</li><li>Fluent in English (read, write, and speak).</li><li>Broad knowledge of stamping, plating, and assembly processes for connectors and sockets is desired.</li><li>Practical application of MS Office software (Word, Excel, PPT, Project, &amp; Outlook).&nbsp;</li><li>Broad project management skill and experience – Ability to work on several projects at once.</li><li>Based in China-Qingdao or the Philippines-Batangas mfg. sites and willingness to travel up to 25% average.</li></ul>

Skills

Industry

Location

Jobtitle

147 root cause analysis specialist Jobs found

Manufacturing Engineer(Molding)

Process Quality Manager

Product specialist

Talent Acquisition Specialist

Senior Project Manager Engineer

Plating Manufacturing Engineer

Cable Assembly - Senior MPD Engineer

MGR II Laboratory

Quality Engineer

Staff Manufacturing & Process Development Engineer – Stamping

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

147 root cause analysis specialist Jobs found

Manufacturing Engineer(Molding)

Process Quality Manager

Product specialist

Talent Acquisition Specialist

Senior Project Manager Engineer

Plating Manufacturing Engineer

Cable Assembly - Senior MPD Engineer

MGR II Laboratory

Quality Engineer

Staff Manufacturing & Process Development Engineer – Stamping

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.