Production Technician I

Quality Technician

Manager - Environmental Health & Safety (EHS)

Structural Engineer

VAVE Staff Product Development Engineer

Quality Associate I

Associate Data Engineer

Senior Manufacturing Engineer

Compounding Technician

Filling Technician

Responsibilities: <ul><li>Operate, monitor, and adjust sterile manufacturing equipment used for formulation, filling, and packaging of IV bag products in compliance with cGMP and SOPs.</li><li>Perform routine preventive maintenance on production equipment to ensure operational readiness and minimize downtime.</li><li>Support equipment and process qualifications, including execution assistance, documentation support, and adherence to qualification protocols.</li><li>Act as first-line troubleshooting support for mechanical or operational equipment issues, escalating to Engineering or Maintenance as required.</li><li>Assist with isolator technology operations, including cleaning, sterilization, and environmental control procedures.</li><li>Participate in line clearance, changeover, and cleaning activities to maintain continuous production operations.</li><li>Accurately complete batch records, logbooks, and production documentation in compliance with data integrity and cGMP requirements.</li><li>Collaborate with Quality Assurance during in-process checks, deviation investigations, and CAPA activities.</li><li>Adhere to DEA and site procedures for controlled substance handling, including documentation and security protocols.</li><li>Contribute to continuous improvement initiatives focused on safety, efficiency, and product quality.</li><li>Work closely with cross-functional teams, including Engineering, Validation, and Quality, to support operational readiness.</li><li>Comply with all Environmental Health &amp; Safety (EHS) standards and maintain a clean and safe work environment.</li></ul> Key Stakeholders Internal <ul><li>Production Supervisor and Production Manager</li><li>Engineering and Maintenance</li><li>Validation and Quality Assurance</li><li>Materials and Warehouse Teams</li><li>Environmental Health &amp; Safety (EHS)</li></ul> External <ul><li>Equipment vendors and service technicians (as required)</li></ul> Requirements: Qualifications &amp; Experience <ul><li>High school diploma or equivalent required; Associate degree or technical certification in mechanical, engineering, or life sciences preferred.</li><li>Minimum 2 years of experience in pharmaceutical or other regulated manufacturing environments, including compounding, filling, inspection, or secondary packaging.</li><li>Prior experience with sterile products or IV bag manufacturing strongly preferred.</li><li>Strong mechanical aptitude with the ability to perform routine maintenance and troubleshoot equipment issues.</li><li>Experience operating automated production equipment using HMI or SCADA interfaces required.</li><li>Working knowledge of cGMP, aseptic processing, and controlled substance regulations preferred.</li><li>Ability to read, understand, and follow SOPs, maintenance procedures, and qualification protocols.</li></ul> Skills &amp; Competencies <ul><li>Strong technical and mechanical problem-solving skills</li><li>High attention to detail with a commitment to quality and data integrity</li><li>Ability to work effectively in a fast-paced, highly regulated environment</li><li>Strong verbal and written communication skills</li><li>Team-oriented mindset with a collaborative approach</li><li>Comfortable working in cleanroom environments with PPE requirements</li></ul>

Responsibilities: <ul><li>Ensuring products meet internal and external customer requirements.</li><li>Performing regular inspections and tests on raw materials, in-process components, and finished products using measurement equipment (e.g., calipers, micrometers, and gauges).</li><li>Recording inspection results and maintaining detailed quality documentation.</li><li>Identifying defects and reporting findings to supervisors or engineers.</li><li>Assisting Quality Engineers in resolving quality issues within the production operation.</li><li>Supporting root cause analysis and corrective action activities.</li><li>Complying with Health, Safety, and Environmental Policies.</li><li>Contributing to continuous improvement activities and initiatives.</li><li>Writing reports and providing data to management.&nbsp;</li></ul> Requirements: <ul><li>Experience as an Inspection or Quality Technician.</li><li>Understanding of engineering drawings and quality management systems (e.g., ISO9000, TS16949, ISO 17025).</li><li>Knowledge of statistical tools (e.g., Minitab) and data analysis.</li><li>Strong attention to detail, analytical, and problem-solving skills.</li><li>Ability to interpret technical information and work with minimal supervision.&nbsp;</li></ul>

Responsibilities: Planning and Budgeting&nbsp;<ul><li>Initiate and execute annual EHS &amp; S improvement project plan, EHS &amp; S training plan, EHS &amp; S internal audit plan and annual EHS &amp; S budget&nbsp;</li></ul> People Management &amp; Development&nbsp;&nbsp; <ul><li>Allocate and balance work across direct reports, review and provide timely performance feedback to subordinate, coach, guide, develop and motivate them,&nbsp;</li><li>help to resolve functional issues in the team, submit manpower request and interview candidates in order to achieve targeted function performance goal.&nbsp;</li><li>Develop skills of direct reports and others with EHS &amp; S responsibilities in the organization.&nbsp;</li></ul> EHS Structure &amp; Program Management&nbsp; <ul><li>Build action plans for the implementation of the organization’s EHS &amp; S programs and take a leadership role in execution in order to deliver the organization’s EHS &amp; S goals and strategy.&nbsp;</li><li>Setting up strong Safety First culture.&nbsp;</li><li>Establish and develop procedures and teams for driving EHS improvements and managing EHS programs.&nbsp;</li><li>Communicate with all levels in the organization on EHS to engage with, influence and promote EHS culture.&nbsp;&nbsp;</li><li>Follow up internal and external audit to verify EHS performance and continue improvement&nbsp;</li><li>Maintein ISO14001 and our client compliance tools.&nbsp;</li><li>Ensure safety of construction projects in the Thailand Erni site.&nbsp;</li><li>Ensure safety of plant moving, including but not limited to moving IND equipment out and DDN equipment in. As well as its installation and&nbsp;</li><li>commissioning safety&nbsp;</li></ul> Reporting&nbsp; Implement below tasks in order to meet the requirements of reporting.&nbsp; <ul><li>Report related required EHS&amp;S data to site, BU management, BU EHS and Corporate EHS.&nbsp;</li><li>Report related EHS&amp;S data required based on applicable legal regulations and company policies.&nbsp;</li><li>Monitor and report organizational safety performance against our client Safety Tool.&nbsp;</li><li>Evaluate and report environmental performance quarterly using company environmental assessment tools.&nbsp;</li></ul> Sustainability and BCP&nbsp; Focus on GHG, energy,&nbsp;hazardous waste &amp; scope 3 reduction.&nbsp;&nbsp; <ul><li>Track energy reducion data.&nbsp;</li><li>Work with Facility team to identify opportunities of energy reduction.&nbsp;</li><li>Coordinate business contunity plan of DG site.&nbsp;</li><li>Follow BU, Seg and Corp policy and lead scope 3 reduction of the site&nbsp;</li></ul> Requirements: <ul><li>University degree or equivalent level of qualification in safety, health, environmental, chemical, mechanical or related technical discipline&nbsp;</li><li>Thailand government required qualification as company EHS manager is a MUST&nbsp;</li><li>Professional EHS Certification preferred.&nbsp;</li><li>Minimum 8+ years EHS experience required.&nbsp;</li><li>Minimum 5+ years experience in EHS management in manufacturing.&nbsp;</li><li>3+ years construction safety experience is a MUST.&nbsp;</li><li>Knowledge and experenice on scope 3 is preferred.</li></ul>

Role Description: <ul><li>This position will require an experienced, results-oriented professional to be responsible for Structural engineering.</li><li>The position will work in a multi-discipline team executing a variety of chemical manufacturing support projects and tasks to support our manufacturing sites.</li></ul> Responsibilities: <ul><li>Work with remote team members and global counterparts to develop deliverables required for structural fabrication and installation of projects and hence excellent communication skills a pre-requisite.</li><li>Provide structural analysis and engineering calculations of a variety of material types including but not limited to steel and concrete.</li><li>Provide structural analysis of steel and concrete elements.</li><li>Well versed with connection design calculations.</li><li>Participate in team model reviews.</li><li>Review Design Drawings</li></ul> Requirements: Basic Qualifications: <ul><li>Master’s degree in Structural Engineering from a reputed premiere institute.</li><li>Minimum 5 years of work experience in an Engineering and/or Engineering Services organization.</li><li>Must have engineering experience performing structural calculations and analysis of structures.</li><li>Computer Environment: Microsoft: Word, Excel, Power Point</li><li>Proficiency in STAAD Pro software</li><li>Should have exposure to environments of 2D and 3D CAD tools including Laser Scans, Bentley MicroStation, AVEVA and AutoCAD platforms or equivalent.</li><li>Experience with applicable industry codes including ACI, AISC, IBC and ability to utilize custom internal specifications as they apply to design and installation of structural assemblies and supports. Be able to perform tasks using U.S. or metric standards</li><li>Excellent written, listening, and verbal communication skills.</li></ul> Preferred Qualifications: <ul><li>Exposure to environments of 2D and 3D CAD tools including Laser Scans, Bentley MicroStation, AVEVA and AutoCAD platforms or equivalent.</li><li>Experience with applicable industry codes including ACI, AISC, IBC and ability to utilize custom internal specifications as they apply to design and installation of structural assemblies and supports. Be able to perform tasks using U.S. or metric standards.</li></ul>

Responsibilities: <ul><li>Lead VAVE initiatives to optimize cost, improve product performance, and enhance customer value while maintaining quality and reliability.</li><li>Go beyond traditional VAVE by driving R&amp;D in emerging materials, advanced manufacturing processes, automation, digital technologies, and innovative supplier solutions.</li><li>Collaborate with cross-functional teams, suppliers, and technology centers to identify, assess, and implement value-driven design and process improvements.</li><li>Develop and deploy tools and methods to analyze cost, performance, manufacturability, and sustainability throughout the product lifecycle.</li><li>Build and maintain a pipeline of VAVE projects in partnership with engineering, procurement, operations, and product management.</li><li>Serve as a subject matter expert in cost optimization and value engineering strategies, including advanced sourcing and alternative design concepts.</li><li>Partner with customers, sales, and product managers to gather Voice of Customer (VOC) insights and translate them into engineering solutions.</li><li>Provide technical support for cost-reduction activities, including design validation, troubleshooting, and verification of VAVE solutions.</li><li>Collaborate globally with manufacturing, procurement, and suppliers to ensure compliance with technical, quality, cost, and delivery objectives.</li><li>Introduce breakthrough engineering solutions that leverage new technologies and supplier capabilities to accelerate business growth.</li><li>Application Engineering: Understanding customer requirements and offering sustainable cost-efficient design solutions.</li><li>Engineering Management: Developing technical roadmaps aligned with market trends and effectively communicating them to business units, management, and customers.</li><li>Collaboration: Working efficiently with global teams and cross-functional stakeholders.</li><li>Technical Expertise: Adapting to new skills, futuristic materials, advanced manufacturing processes, automation, digital technologies, and innovative supplier solutions.</li><li>Quality Control: Ensuring accuracy and quality in services, documentation, and engineering outputs.</li></ul> Requirements: <ul><li>Master’s degree in mechanical engineering from premier institution.</li><li>Deep understanding of product, design, materials (metals/plastics properties), processes and manufacturing science/technology.</li><li>Knowledge of manufacturing processes such as machining, molding, stamping, and plating is advantageous.</li><li>Familiarity with material standards and agency approvals for connectors, cables, and cable assemblies.</li><li>Experience in environmental life cycle assessment, circular economy, or product stewardship/compliance.</li><li>Knowledge of ISO/IEC/UL standards related to carbon footprint and emissions reduction in industrial products.&nbsp;</li><li>Minimum of 12 years of experience in Product Development, R&amp;D and VAVE engineering.</li><li>Background in connector design (Power/Industrial/Auto connectors) is a plus.</li><li>Ability to work independently in a highly technical environment.</li><li>Expertise in Design for Cost (DFC), Design for Manufacturing (DFM), and Design for Sustainability (DFS).</li><li>Strong Presentation Skills: Proficiency in PowerPoint and effective communication of technical concepts.</li></ul>

Responsibilities: <ul><li>Provide daily quality oversight during manufacturing, warehousing, and qualification activities, including but not limited to line clearance and AQL sampling.</li><li>Ensure adherence to cGMP, SOPs, and regulatory standards.</li><li>Lead and execute QA review of batch records, logbooks, and related GMP documentation to support timely and accurate product disposition.</li><li>Develop, implement, and maintain site-specific quality procedures (SOPs, work instructions, forms) governing QA support responsibilities</li><li>Ensure proper execution of Good Documentation Practices (GDP)and data integrity in all manufacturing executed records.</li><li>Take active role in preparing the site for regulatory inspection.</li><li>Act as a QA representative during regulatory inspections, internal audits, and customer audits.</li><li>Contribute to the inspection readiness of the site, including periodic walkthroughs and risk-based quality improvements.</li></ul> Requirements: Qualifications / Experience <ul><li>Bachelor’s degree in a scientific or technical discipline (e.g., Biology, Chemistry, Pharmacy, Engineering).</li><li>5+ years of experience in pharmaceutical manufacturing, or QA.</li><li>Familiarity with aseptic manufacturing, sterile injectable processes, and cleanroom environments.</li><li>Knowledge of FDA cGMPs, ICH Q8-Q10 guidelines, EU Annex 1, and risk-based qualification approaches.</li><li>Experience supporting regulatory inspections and validation documentation reviews.</li></ul> Skills / Competencies <ul><li>Strong knowledge of 21 CFR part 10, and 211.</li><li>Strong knowledge of aseptic GMP manufacturing and QA shopfloor support.</li><li>Excellent organizational and communication skills with high attention to detail.</li><li>Ability to work collaboratively with operations, and engineering.</li><li>Commitment to data integrity, continuous improvement, and patient safety.</li></ul>

Responsibilities: <ul><li>Ability to troubleshoot problems in a live environment and provide real time help with critical issues.</li><li>Write code that is easily understood and maintainable by other team members.</li><li>Keep up to date with developments in technologies we are using.</li><li>Ability to communicate and work effectively, supporting various business departments.</li><li>Ability to work in fast-paced interdisciplinary environment.</li></ul> Requirements <ul><li>BA/BS in Computer Science or equivalent practical experience.&nbsp;</li><li>At least 3+ years of post-university experience as a full-stack engineer.</li><li>Solid knowledge of programming fundamentals—algorithms, data structures, design patterns, and paradigms.</li><li>Strong knowledge of Python.</li><li>Solid knowledge SQL and relational databases.</li><li>Knowledge of Extract-Transform-Load (ETL) and big data analytics tools.</li><li>Experience working in a cloud environment (AWS, Azure, GCP).</li><li>Familiarity with popular Python data analytics frameworks.</li><li>Familiarity with Snowflake or other large analytics engines.</li><li>Experience with data warehousing and working in environments with large scale, complex analytics requirements.</li><li>Familiarity with DAG-based job scheduling tools.</li><li>Cloud-native container orchestration platforms and tools.</li><li>Experience working in the Financial Services industry.</li></ul>

Responsibilities: <ul><li>Lead a dedicated team of engineers and technicians within the Projects or Manufacturing group.</li><li>Ensure that engineers are fully integrated into the overall project team and production support activities.</li><li>Plan and implement training and development programs for direct reports.</li><li>Complete process design and development projects by training and guiding technicians.</li><li>Provide coaching and mentorship to team members.</li><li>Establish engineering goals and objectives aligned with business plans.</li><li>Identify and implement effective, permanent technical and system solutions to problems.</li><li>Consistently meet customer requirements, performance expectations, and deadlines.</li><li>Prepare product and process reports by collecting, analyzing, and summarizing information and trends.</li><li>Champion compliance with internal systems and processes.</li><li>Identify and develop improvements to enhance Service, Delivery, Quality, and Cost metrics using Lean/Six Sigma methodologies.</li><li>Research advanced process technologies and evaluate potential competitive advantages and cost benefits.</li><li>Lead or guide a portfolio of engineering projects in collaboration with cross-functional teams (e.g., NPI, quality engineering, design assurance, R&amp;D).</li><li>Collaborate with teams to plan, coordinate, and implement activities supporting the successful launch of new products, including make/buy analysis, new process introduction, and more.</li><li>Develop or modify manufacturing processes by studying product requirements and designing, modifying, or testing manufacturing methods and equipment.</li><li>Maintain professional and technical knowledge through workshops, publications, networking, and participation in professional societies.</li><li>Manage external relationships with key technology suppliers.</li><li>Oversee workload distribution among engineers and technicians to meet operational and business priorities.</li></ul>&nbsp;Requirements: Education &amp; Experience <ul><li>Bachelor’s degree or equivalent in an Engineering field with 5–10 years of experience in a demanding high-volume production environment or a high-mix, low-volume environment.</li><li>Experience in medical devices or similar regulated manufacturing and quality systems is essential.</li><li>Proficiency with CAD tools; SolidWorks preferred.</li><li>Experience using Minitab, MS Project, and advanced Excel.</li><li>Demonstrated ability to lead a production-focused team, drive technical problem solving, and manage line setup including equipment acquisition and process development.</li><li>Working knowledge of Lean and/or Six Sigma engineering principles with proven results.</li><li>Statistical knowledge, including data analysis and statistical software (JMP, Minitab, etc.).</li><li>Lean Six Sigma Green Belt certification preferred.</li><li>Excellent communication, planning, and organizational skills.</li><li>Self-motivated with strong decision-making abilities.</li><li>Willingness to work independently and to take on an international assignment of up to 3 months.</li><li>Fluent in English (written and verbal), &gt;80% proficiency.</li></ul>

Responsibilities: <ul><li>Operate, monitor, and adjust sterile manufacturing equipment for formulation, filling, and packaging of IV bag products in compliance with SOPs, cGMP, and safety requirements.</li><li>Perform routine preventive maintenance and minor repairs on production equipment to maintain optimal operating conditions.</li><li>Serve as first-line troubleshooting support for equipment and process issues, escalating to engineering or maintenance as required.</li><li>Support equipment and process qualifications, including protocol review, execution participation, and documentation completion.</li><li>Assist in the creation, revision, and implementation of SOPs and production-related procedures.</li><li>Provide training, guidance, and on-the-job support to Production Technician I personnel.</li><li>Perform cleaning, changeover, and line clearance activities to maintain manufacturing operations.</li><li>Accurately complete batch records, logbooks, and production documentation in compliance with data integrity requirements and cGMP practices.</li><li>Review documentation completed by fellow members of the production team.</li><li>Collaborate with Quality Assurance during in-process checks, deviation investigations, and CAPA activities.</li><li>Adhere to DEA and site procedures for controlled substance handling, including documentation and security protocols.</li><li>Work closely with cross-functional teams including Engineering, Validation, and Quality to support operational readiness.</li><li>Operate isolator technology, including performing and verifying sanitization steps, and supporting advanced troubleshooting.</li><li>Ensure controlled substances are handled, documented, and stored per DEA and site requirements.</li><li>Participate in continuous improvement and lean manufacturing initiatives to enhance safety, quality, and efficiency.</li></ul> Requirements: Qualifications / Experience <ul><li>High school diploma or equivalent required; associate degree or technical certification in a mechanical, engineering, or life sciences discipline preferred.</li><li>Minimum of 5 years’ experience in pharmaceutical or regulated manufacturing in areas of compounding, filling, inspection, and secondary packaging. Experience with sterile products or IV bag production preferred.</li><li>Demonstrated mechanical aptitude with hands-on equipment troubleshooting and maintenance skills.</li><li>Knowledge of cGMP, aseptic processing, and controlled substance handling requirements.</li><li>Minimum of 3 years’ experience working with automated production equipment utilizing HMI or SCADA interface required.</li><li>Experience with isolator-based manufacturing strongly preferred.</li><li>Experience reading and following technical documents such as SOPs, maintenance procedures, electrical drawings, equipment arrangements, piping diagrams, and qualification protocols</li></ul> Skills / Competencies <ul><li>Demonstrated problem-solving and mechanical troubleshooting skills.</li><li>Ability to mentor and train less experienced technicians.</li><li>Excellent attention to detail and documentation accuracy.</li><li>Effective communication and teamwork skills.</li><li>Commitment to safety, quality, and data integrity.</li><li>At home working in cleanroom environments with PPE requirements.</li></ul>

Responsibilities: <ul><li>Operate, monitor, and adjust sterile manufacturing equipment for formulation, filling, and packaging of IV bag products in compliance with SOPs, cGMP, and safety requirements.</li><li>Perform routine preventive maintenance and minor repairs on production equipment to maintain optimal operating conditions.</li><li>Serve as first-line troubleshooting support for equipment and process issues, escalating to engineering or maintenance as required.</li><li>Support equipment and process qualifications, including protocol review, execution participation, and documentation completion.</li><li>Assist in the creation, revision, and implementation of SOPs and production-related procedures.</li><li>Provide training, guidance, and on-the-job support to Production Technician I personnel.</li><li>Perform cleaning, changeover, and line clearance activities to maintain manufacturing operations.</li><li>Accurately complete batch records, logbooks, and production documentation in compliance with data integrity requirements and cGMP practices.</li><li>Review documentation completed by fellow members of the production team.</li><li>Collaborate with Quality Assurance during in-process checks, deviation investigations, and CAPA activities.</li><li>Adhere to DEA and site procedures for controlled substance handling, including documentation and security protocols.</li><li>Work closely with cross-functional teams including Engineering, Validation, and Quality to support operational readiness.</li><li>Operate isolator technology, including performing and verifying sanitization steps, and supporting advanced troubleshooting.</li><li>Ensure controlled substances are handled, documented, and stored per DEA and site requirements.</li><li>Participate in continuous improvement and lean manufacturing initiatives to enhance safety, quality, and efficiency.</li></ul> Requirements: Qualifications / Experience&nbsp; <ul><li>High school diploma or equivalent required; associate degree or technical certification in a mechanical, engineering, or life sciences discipline preferred.</li><li>Minimum of 5 years’ experience in pharmaceutical or regulated manufacturing in areas of compounding, filling, inspection, and secondary packaging. Experience with sterile products or IV bag production preferred.</li><li>Demonstrated mechanical aptitude with hands-on equipment troubleshooting and maintenance skills.</li><li>Knowledge of cGMP, aseptic processing, and controlled substance handling requirements.</li><li>Minimum of 3 years’ experience working with automated production equipment utilizing HMI or SCADA interface required.</li><li>Experience with isolator-based manufacturing strongly preferred.</li><li>Experience reading and following technical documents such as SOPs, maintenance procedures, electrical drawings, equipment arrangements, piping diagrams, and qualification protocols</li></ul> Skills/Competencies <ul><li>Demonstrated problem-solving and mechanical troubleshooting skills.</li><li>Ability to mentor and train less experienced technicians.</li><li>Excellent attention to detail and documentation accuracy.</li><li>Effective communication and teamwork skills.</li><li>Commitment to safety, quality, and data integrity.</li><li>At home working in cleanroom environments with PPE requirements.</li></ul>

Skills

Industry

Location

Jobtitle

156 safety engineer drilling workover operation Jobs found

Production Technician I

Quality Technician

Manager - Environmental Health & Safety (EHS)

Structural Engineer

VAVE Staff Product Development Engineer

Quality Associate I

Associate Data Engineer

Senior Manufacturing Engineer

Compounding Technician

Filling Technician

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

156 safety engineer drilling workover operation Jobs found

Production Technician I

Quality Technician

Manager - Environmental Health & Safety (EHS)

Structural Engineer

VAVE Staff Product Development Engineer

Quality Associate I

Associate Data Engineer

Senior Manufacturing Engineer

Compounding Technician

Filling Technician

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.