ASC Safety Engineer

HSE Specialist (Common Offices)

Technical Safety (Process Safety)

Safety Engineer

ASC - Technical Safety (Process Safety)

Workplace Experience Manager

Safety Engineer (Loss Prevention) 

Safety Advisor

ASC Field Compliance Coordinator

Field Safety Compliance

Responsibilities: <ul><li>Provide advice and consultation to department staff to assist them in maintaining a safe working environment in compliance with environmental/safety regulations, standards and practices.</li><li>Identify and evaluate hazardous conditions and practices in the workplace.</li><li>Provide advice and counsel concerning compliance with corporate safety regulation and procedures.</li><li>Perform job site safety compliance inspections including hazard analyses and safe work procedures, and prepares written reports and recommendations.</li><li>Measure and evaluate the effectiveness of the hazard control system, policies, and procedures and recommends changes that reflect improved opportunities to eliminate work place incidents and injuries.</li><li>Prepare safety orientations, safety training, and job site inspection procedures and conduct specialized safety and environmental training programs to communicate hazard control information.</li><li>Review and analyze injury, property damage, and statistical loss data and works with management to prepare comprehensive recommendations for corrective action to eliminate or minimize potential hazards.</li><li>Incorporate essential safety requirements in all purchasing and contracting actions and recommend the purchase of safety equipment, related supplies, and personal protective equipment (PPE) in accordance with established company requirements.</li></ul> Requirements: <ul><li>As a successful candidate you will hold a Bachelor degree in engineering, safety engineering, industrial hygiene, or environmental science, or in a related field is preferred.</li><li>You should have eight years of related safety/operational experience and/or training, preferably in the oil/gas or petrochemical industry, or in the industry related to the position placement, e.g., marine,pipelines, power distribution.</li><li>You should have deep knowledge or training in occupational health, safety and environmental compliance with applicable industry, governmental and/or international standards.</li><li>Must also have ability to assist with developing, implementing, and coordinating comprehensive health and safety programs.</li></ul>

Role Description: <ul><li>We have an exceptional opportunity for an accomplished Health and Safety (H&amp;S) specialist to lead the establishment of robust health and safety support systems.</li><li>In this role, you will coordinate Fire Safety protocols across our global common offices.</li><li>Joining our esteemed H&amp;S Nordics team, you will play a pivotal role in initiating and maintaining comprehensive healthcare initiatives tailored specifically for Denmark.</li><li>Your contributions will extend beyond regional borders, providing invaluable knowledge, training, and standardized instructions to Corporate Staff Functions and Business Area Market managers and employees.</li></ul> Responsibilities: <ul><li>Implementing the World Class H&amp;S strategy to ensure optimal safety standards company-wide.</li><li>Overseeing health care contracts and maintaining quality care standards.</li><li>Strategically managing health initiatives and processes.</li><li>Maintaining a comprehensive legal register and providing support on legal matters.</li><li>Compiling and submitting H&amp;S reports for various purposes.</li><li>Developing and disseminating common H&amp;S instructions.</li><li>Coordinating H&amp;S training programs and facilitating webinars.</li><li>Collaborating on international H&amp;S projects.</li><li>Establishing systematic work environment tasks for all common offices.</li><li>Serving as the primary point of contact for H&amp;S matters in Denmark.</li><li>Coordinating Fire Safety protocols for common offices throughout the our client.</li><li>As the designated Fire Safety Coordinator, you will ensure adherence to stringent fire safety measures worldwide, contributing to advancing our global safety standards.</li></ul> Requirements: Qualifications: Your role: <ul><li>As a member of the H&amp;S team Nordics within Corporate Staff Functions, you will collaborate closely with H&amp;S Specialists and Rehabilitation Specialists to provide comprehensive support to businesses and managers.</li><li>You will actively engage in H&amp;S projects determined by national teams or the Group Centre of Excellence, ensuring the implementation of industry best practices across different regions.</li></ul> Your profile: <ul><li>We are seeking an experienced individual with a track record of leading Health, Safety, and Environment (HSE) initiatives, ideally within a large-scale global enterprise.</li><li>You should demonstrate competency and experience in Health and Safety legislation, regulatory requirements, and Fire Safety.</li><li>Proficiency in collaborating with international and culturally diverse teams, exceptional networking skills, and fluency in English are essential.</li><li>Join our team and contribute to our mission of bolstering safety standards organization-wide, making a meaningful difference in safeguarding our workforce and environment.</li></ul>

Role Description: <ul><li>We are seeking a Technical Safety (Process Safety) Engineer to join the Loss Prevention organization (LP), which is the corporate safety organization.</li><li>We provide both day-to-day in-field occupational and process safety support to operations, as well as centralized technical support and consulting function.</li><li>Our field offices are located in Abqaiq, Riyadh, Ras Tanura, Dhahran, Udhailiyah, Jeddah (including Yanbu and Jazan), and Tanajib. Through these offices, LP provides its services to all facilities and departments that are located throughout the Kingdom.</li><li>Your primary role as a Technical Safety Engineer is to work with key stakeholder organizations to provide technical guidance on facility design requirements pertaining to fire prevention and process safety engineering areas, including but not limited to firewater systems, fireproofing, emergency shutdown systems, drainage systems, tank designs, electrical classifications, pipeline design factors, equipment access and layout, spacing, risk areas.</li></ul> Responsibilities: <ul><li>As the successful candidate, you will have the requisite knowledge, skills, and experience to:</li><li>Provide technical guidance and develop procedures for all company organizations on fire prevention and process safety engineering in facilities design and related operational requirements, including company and international standards (e.g., NFPA, API).</li><li>Review all new projects to ensure conformance to company and international engineering standards; represent LP at project proposal meetings, and provide continuing guidance through design, construction, and commissioning.</li><li>Provide company-wide technical guidance and assistance during design-related surveys of facilities for adequacy of design, operations and maintenance.</li><li>Analyze fires and process safety incidents both in the industry and to determine causes and whether company standards or other requirements require update or changes, or whether other remedial measures should be considered.</li><li>Initiate and participate in studies to resolve specific problems outside currently available technology.</li><li>Develop training programs in the field of process safety and fire prevention engineering and provide training assistance as required.</li><li>Use risk analysis techniques to identify corporate risk exposure and develop cost-effective solutions.</li><li>Assist in surveys of operations by insurance, Government, and other outside agencies, and act as the Company expert on fire prevention engineering standard requirements.</li><li>Mentor other LP personnel.</li></ul> Requirements: <ul><li>As the successful candidate, you will hold a bachelors degree in chemical engineering or fire protection engineering, and ten years of relevant industry experience in the oil and gas, petrochemicals, or related industries, five of which focused on addressing technical safety and fire prevention engineering issues.</li><li>Professional Engineering licensing/certification/registration in Fire Protection Engineering, or an advanced degree is highly desirable.</li><li>You will have an excellent ability to communicate in English with peers as well as members of management and be able to produce clear and concise oral and written reports in English.</li></ul> Working Environment: <ul><li>Our high-performing employees are drawn by the challenging and rewarding professional, technical and industrial opportunities we offer, and are remunerated accordingly.</li><li>Our people work on truly world-scale projects, supported by investment in capital and technology that is second to none.</li><li>And because, as a global energy company, we are faced with addressing some of the world’s biggest technical, logistical and environmental challenges, we invest heavily in talent development.</li><li>We have a proud history of educating and training our workforce over many decades.</li><li>Employees at all levels are encouraged to improve their sector-specific knowledge and competencies through our workforce development programs – one of the largest in the world.</li></ul>

Responsibilities:&nbsp; <ul><li>Provides advice and consultation to department staff to assist them in maintaining a safe working environment in compliance with environmental/safety regulations, standards and practices.</li><li>Identifies and evaluates hazardous conditions and practices in the workplace. Undertakes surveys to identify and evaluate occupational health, safety and environmental conditions. Conducts and coordinates on-site inspections to audit physical conditions and safe work practices.&nbsp;</li><li>Provides advice and counsel concerning compliance with corporate safety regulation and procedures.</li><li>Performs construction site and/or area safety inspections of department facilities and operations.&nbsp;</li><li>Performs job site safety compliance inspections including hazard analyses and safe work procedures, and prepares written reports and recommendations.</li><li>Develops controls for identified hazards.&nbsp;</li><li>Coordinates the implementation of controls from results of hazard analyses.&nbsp;</li><li>Measures and evaluates the effectiveness of the hazard control system, policies, and procedures and recommends changes that reflect improved opportunities to eliminate work place incidents and injuries.</li><li>Prepares safety orientations, safety training, and job site inspection procedures.&nbsp;</li><li>Directs or assists in the development of specialized education and training materials.&nbsp;</li><li>Conducts specialized safety and environmental training programs to communicate hazard control information.&nbsp;</li><li>Assists local management in new employee occupational health, safety and environmental orientation.</li><li>Participates in Safe Operations Committee meetings.</li><li>Reviews and analyzes injury, property damage, and statistical loss data and works with management to prepare comprehensive recommendations for corrective action to eliminate or minimize potential hazards.</li><li>Incorporates essential safety requirements in all purchasing and contracting actions.&nbsp;</li><li>Recommends the purchase of safety equipment, related supplies, and personal protective equipment (PPE) in accordance with established company requirements.&nbsp;</li><li>Maintains awareness of corporate safety requirements and makes recommendations for their implementation.</li><li>Assists management with monitoring adherence to department safety program by employees and contractors.</li><li>Performs other related duties per supervisor’s direction.</li></ul> Requirements: <ul><li>BS degree in engineering, safety engineering, industrial hygiene, or environmental science, or in a related field is preferred in addition to certification for radiation safety officer (RSO).</li><li>Must have (8) years of related safety/operational experience and/or training, preferably in the oil/gas or petrochemical industry, or in the industry related to the position placement.</li><li>Must have knowledge or training in the following: occupational health, safety and environmental compliance with applicable industry, governmental and/or international standards.</li><li>Must have demonstrated knowledge of delivering hands on health, safety and environmental training.&nbsp;</li><li>Must also have ability to assist with developing, implementing, and coordinating comprehensive health and safety programs.</li><li>Excellent communication skills, both verbal and written (training/presentations/report writing).&nbsp;</li><li>Participate in teams and/or committees.</li><li>Skilled in the standards, concepts, practices, and procedures within the health, safety and environmental fields.</li></ul>

Responsibilities: Service Delivery &amp; Vendor Management: <ul><li>Own the IFM and Non IFM local contract(s) and manage the relationship to ensure efficient partnerships and the provision of the correct level of service and opportunities.</li><li>Lead the end-to-end delivery of WX services for all locations - including but not limited to building projects, hard services, cleaning, building services, and on-site benefits.</li><li>Lead and ensure delivery of Fleet Services.</li><li>Track service performance metrics through company recognized KPIs and methodologies and manage delivery through all third-party vendors to the agreed SLAs.</li><li>Ensure quality controls of services execution by internal staff and third party vendors.</li><li>Ensure compliance of all services with relevant norms and regulations.</li><li>Identify and highlight best practices through continuous assessment of processes.</li><li>Adapt service delivery to new ways of working and remote presence of employees on site.&nbsp;</li></ul> Project Management: <ul><li>Lead and manage all aspects of construction/refurbishment projects and capital project services for our client portfolio as well as all WX-related projects.&nbsp;</li></ul> Requirements: <ul><li>Bachelor’s degree in Business Administration, Hospitablity, Engineering or Real Estate.</li><li>5+ years of experience in multiple-vendor management.</li><li>5+ years of experience of managing service delivery.</li><li>5+ years of experience of people management.&nbsp;</li></ul>

Role Description: <ul><li>We are seeking a Safety Engineer to join the Loss Prevention organization (LP), which is the corporate safety organization.</li><li>We provide both day-to-day in-field occupational and process safety support to operations, as well as centralized technical support and consulting function.</li><li>Our field offices are located in Abqaiq, Riyadh, Ras Tanura, Dhahran, Udhailiyah, Jeddah (including Yanbu and Jazan), and Tanajib.</li><li>Through these offices, LP provides its services to all facilities and departments that are located throughout the Kingdom.</li><li>Your primary role as a Safety Engineer (Loss Prevention Engineer) is to provide daily support to company facilities and departments, helping them effectively implement the Safety Management System (Occupational &amp; Process Safety) expectations and associated programs, as well as assuring compliance to all company safety requirements.&nbsp;&nbsp;</li></ul> Responsibilities: <ul><li>As the successful candidate, you will have the requisite knowledge, skills, and experience to:</li><li>Facilitate implementation of the Safety Management System, as well as its objectives and expectations, including developing associated safety processes, and participating in self-assessments.</li><li>Conduct field inspections/reviews to assess compliance to company and international codes and standards, identify safety concerns, formulate solutions, and develop practical and cost-effective corrective actions.</li><li>Identify, evaluate, recommend actions, and follow up on critical, yet universal safety tasks and control methodologies related to operational safety practices (e.g., work at height, isolation/LOTO, permit to work, hydrogen sulfide, confined space entry, excavations).</li><li>Participate in safety studies/activities using risk assessment and mitigation methodologies, such as: PHAs, HAZOPs, JSAs, incident investigations, compliance reviews, or insurance surveys.</li><li>Respond to emergency situations and incidents, either during or after regular working hours, to provide technical assistance and advice.</li><li>Participate in worksite contractor safety management activities (e.g., contractor selection and prequalification, monitoring of work site compliance, and measurement of performance).</li><li>Support the reporting, classification and investigation all incidents, and participating in incident investigations, determination of root causes, and proper recommendations to prevent recurrence.</li><li>Deliver Loss Prevention-specific training to employees, contractors, and outside parties.</li><li>Mentor other Loss Prevention personnel.</li></ul> Requirements: <ul><li>As the successful candidate, you will hold a Bachelor degree in Engineering or Engineering Technology from an Accredited Institution, and seven years of experience as a safety professional in the oil and gas, petrochemicals, or related industries, including a strong track record in delivering results.</li><li>The experience should be comprehensive, covering both occupational and process safety.</li><li>You will have an excellent ability to communicate in English with peers as well as members of management, and be able to produce clear and concise oral and written reports in English.</li></ul> Working Environment: <ul><li>Our high-performing employees are drawn by the challenging and rewarding professional, technical and industrial opportunities we offer, and are remunerated accordingly.</li><li>At our client, our people work on truly world-scale projects, supported by investment in capital and technology that is second to none.&nbsp;</li><li>And because, as a global energy company, we are faced with addressing some of the world’s biggest technical, logistical and environmental challenges, we invest heavily in talent development.</li><li>We have a proud history of educating and training our workforce over many decades.&nbsp;</li><li>Employees at all levels are encouraged to improve their sector-specific knowledge and competencies through our workforce development programs – one of the largest in the world.</li></ul>

Responsibilities: <ul><li>You will be required to perform the following:</li><li>Assess and report contractor compliance with contract Occupational Health, Safety, and Environmental requirements.</li><li>Conduct preconstruction job explanation and kick-off meetings to explain construction execution safety requirements per contract scope.</li><li>Track and analyze Key Performance Indicators for performance improvement opportunities.</li><li>Develop and conduct safety training.</li><li>Provide advice and consultation to department staff to assist them in maintaining a safe working environment in compliance with environmental/safety regulations, standards and practices.</li><li>Identify and evaluate hazardous conditions and practices in the workplace. Undertake surveys to identify and evaluate occupational health, safety and environmental conditions.</li><li>Conduct and coordinate on-site inspections to audit physical conditions and safe work practices.</li><li>Provide advice and counsel concerning compliance with corporate safety regulation and procedures.</li><li>Perform construction site and/or area safety inspections of department facilities and operations.</li><li>Perform job site safety compliance inspections, including hazard analyses and safe work procedures, and prepare written reports and recommendations.</li><li>Develop controls for identified hazards.</li><li>Coordinate the implementation of controls from results of hazard analyses.</li><li>Measure and evaluate the effectiveness of the hazard control system, policies, and procedures and recommend changes that reflect improved opportunities to eliminate work place incidents and injuries.</li><li>Prepare safety orientations, safety training and job site inspection procedures. Direct or assist in the development of specialized education and training materials. Conduct specialized safety and environmental training programs to communicate hazard control information.</li><li>Assist local management in new employee occupational health, safety and environmental orientation.</li><li>Participate in Safe Operations Committee meetings.</li><li>Review and analyze injury, property damage, and statistical loss data and work with management to prepare comprehensive recommendations for corrective action to eliminate or minimize potential hazards.</li><li>Incorporate essential safety requirements in all purchasing and contracting actions.</li><li>Recommend the purchase of safety equipment, related supplies, and personal protective equipment (PPE) in accordance with established company requirements.</li><li>Maintain awareness of corporate safety and environmental requirements and make recommendations for their implementation.</li><li>Assist management with monitoring adherence to department safety and environmental programs by employees and contractors.</li></ul> Requirements: <ul><li>As the successful candidate you will hold a Bachelors degree in engineering, safety engineering, industrial hygiene, or environmental science, or in a related field from a recognized and approved program. </li><li>An advanced degree is preferred.</li><li>You will have twelve (12) years experience related to heavy construction safety, preferably in on/offshore oil/gas construction industry, petrochemical construction industry, or in construction project management.</li><li>You must have demonstrated knowledge of delivering hands on health, safety and environmental training. </li><li>Must also have ability to assist with developing, implementing, and coordinating comprehensive health and safety programs.</li><li>You will have good communication skills, both verbal and written (training/presentations/report writing). </li><li>Participate in teams and/or committees. Strong PC skills in Microsoft Office (Word, Excel and PowerPoint). </li><li>Skilled in the standards, concepts, practices, and procedures within the health, safety and environmental fields.</li><li>You will have the ability to work at all levels within an organization and the ability to work in a diverse work group is necessary.</li></ul>

Responsibilities: The candidate will be required to perform the following: <ul><li>Enhance Business line safety standards and general procedures such as work permit, process safety, hazards identification, risk management, emergency preparedness etc.</li><li>Developing loss prevention, fire prevention and safety standards, procedures and General Instructions (GIs) for matters not already addressed by existing resources.</li><li>Providing advice and consultation to Upstream management as requested to facilitate Safety Management System (SMS) enhancement.</li><li>Develop critical safety documents for major activities such as job safety analysis and hazards identification plans.</li><li>Assisting departments in preparing for major safety review such as loss prevention compliance reviews.</li><li>Researches emerging safety technologies and conducts feasibility studies and cost analyses to identify improved solutions to existing safety problems and emerging regulatory requirements.</li><li>Acting as an expert process safety resource for risk identification and mitigation during design, construction, commissioning, turn-over to operations, on-going operations, management of change and decommissioning of facilities.</li><li>Developing and delivering safety training materials and safe work procedures to the field personnel.</li><li>Instructing on safety concepts, practices and standards (both on-the-job and classroom based).</li><li>Directing and participating in the preparation of major reference manuals documenting corporate and LPD safety systems, policies, and procedures (e.g., LP Policy, SMS manual, Safety Handbook, Construction Safety Manual). Reviews related high-level documents from other organizations or outside parties with potential to impact the safety of company operations as required.</li><li>Facilitating and leading incident investigations including interviewing witnesses, data gathering and verification and implement a root cause analysis.</li><li>Facilitating and leading safety audits by identifying areas of non-compliance with occupational health and safety regulations and advise on how to improve existing conditions.</li></ul> Requirements: <ul><li>Post graduate degree in process safety and loss prevention from an internationally recognized institution.</li><li>A bachelor degree in preferably chemical or mechanical engineering.</li><li>Certified Safety Professional from Board of Certified Safety Professionals or equivalent (NEBOSH Diploma).</li><li>Master degree or PHD is recommended.</li><li>A minimum of 15 years’ experience working in operations for oil, gas, petrochemical plants or refineries, with clear evidence of having delivered major impact in this capacity.</li><li>A minimum of 5 years’ experience working in a senior position as a Loss Prevention and Fire Prevention expert, with clear evidence of having delivered major impact in this capacity.</li><li>Strong technical expertise in the area of process safety, e.g. design engineering, loss control management, hazard identification, hazard and operability reviews, incident investigations, emergency preparedness and response, safety management systems.</li><li>Extensive experience leading and participating in HAZOP and SIL studies with internationally recognized certifications.</li><li>Extensive experience working in organizations that have diversified manufacturing plants.</li><li>Must be able to work with minimum supervision on relatively unstructured tasks. Must have the demonstrated ability to produce top quality written and oral reports.</li><li>Excellent command of oral and written English.</li></ul>

Role Description: <ul><li>As one of the world’s largest fully integrated energy enterprises, our client looks for individuals who can meet and exceed our expectations.</li><li>Power Systems Technical Support Department is currently seeking an experienced Field Compliance Coordinator to join the Power Systems Department in Dhahran, Saudi Arabia.</li></ul> Responsibilities: <ul><li>Provide advice and consultation to department staff to assist them in maintaining a safe working environment in compliance with environmental/safety regulations, standards and practices.</li><li>Identify and evaluate hazardous conditions and practices in the workplace. Conduct surveys to identify and evaluate occupational health, safety and environmental conditions.&nbsp;</li><li>Conduct and coordinate on-site inspections to audit physical conditions and safe work practices.&nbsp;</li><li>Provide advice and counsel concerning compliance with corporate safety regulations and procedures.</li><li>Perform construction site and/or area safety inspections of department facilities and operations.&nbsp;</li><li>Perform job site safety compliance inspections, including hazard analyses and safe work procedures, and prepare written reports and recommendations.</li><li>Develop controls for identified hazards.&nbsp;</li><li>Coordinate the implementation of controls from the results of hazard analyses.&nbsp;</li><li>Measure and evaluate the effectiveness of the hazard control system, policies, and procedures and recommend changes that reflect improved opportunities to eliminate work place incidents and injuries.</li><li>Prepare safety orientations, safety training and job site inspection procedures. Direct or assist in the development of specialized education and training materials. Conduct specialized safety and environmental training programs to communicate hazard control information.&nbsp;</li><li>Assist local management in new employee occupational health, safety and environmental orientation.</li><li>Participate in Safe Operations Committee meetings.</li><li>Review and analyze injury, property damage, and statistical loss data and work with management to prepare comprehensive recommendations for corrective action to eliminate or minimize potential hazards.</li><li>Incorporate essential safety requirements in all purchasing and contracting actions.&nbsp;</li><li>Recommend the purchase of safety equipment, related supplies, and personal protective equipment (PPE) in accordance with established company requirements.</li><li>Maintain awareness of corporate safety and environmental requirements and make recommendations for their implementation.</li><li>Assist management with monitoring adherence to department safety and environmental programs by employees and contractors.</li></ul> Requirements: <ul><li>As the successful candidate you will have a bachelor’s degree in engineering, safety engineering, industrial hygiene, environmental science or a related field.</li><li>You will have nine years of related safety/operational experience and/or training, preferably in the oil/gas or petrochemical industry, or in power distribution.</li><li>You must have knowledge or training in occupational health, safety and environmental compliance within power systems.</li></ul>

Skills

Industry

Location

Jobtitle

762 safety experience Jobs found

ASC Safety Engineer

HSE Specialist (Common Offices)

Technical Safety (Process Safety)

Safety Engineer

ASC - Technical Safety (Process Safety)

Workplace Experience Manager

Safety Engineer (Loss Prevention)

Safety Advisor

ASC Field Compliance Coordinator

Field Safety Compliance

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

762 safety experience Jobs found

ASC Safety Engineer

HSE Specialist (Common Offices)

Technical Safety (Process Safety)

Safety Engineer

ASC - Technical Safety (Process Safety)

Workplace Experience Manager

Safety Engineer (Loss Prevention)

Safety Advisor

ASC Field Compliance Coordinator

Field Safety Compliance

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.