Senior Process Engineer, Wet

Senior Process Engineer, Dry Etch

Product Engineer/Senior - FDC/R2R

Account Manager IV - Connected Living Solutions

MFG & Process DVL Engineer I

Maintenance Technician

Mechanical Maintenance Engineer - Automation Technology

Strategic Account Executive

Senior IT Engineer

Country Accountant

Responsibilities: <ul><li>Drive cost reduction, weed out unwarranted expenses/wastages, find alternative sources and improve processes with innovative solutions to raise efficiency.</li><li>Drive quality investigations and continuous improvement programs to resolve chronic process and quality issues, and institute permanent resolutions to assure product quality and enhance process robustness.</li><li>Enforce online controls and execution to conform to work instructions and procedures. Apply hands-on and with deep involvement at work.</li><li>Coach, guide and train engineers and technicians in processes and problem solving and analysis to build up their technical competencies and achieve self-sustenance.</li><li>Take accountability of work and possesses strong sense of responsibility and teamwork.</li><li>Ensure non-conformance is dealt with in a proper and effective manner.</li><li>Establish, review and perform regular update of FMEA, OCAP, Process control, Risk Assessment and SIPOC on all critical processes to ensure a robust process.</li><li>Compliance with CSR, EHS, QM, ESD, 5S standard and cleanroom protocol.</li></ul> Requirements: <ul><li>Minimum bachelor’s degree in physics / chemistry / Material Science/ Electronic or Electrical Engineering or equivalent.</li><li>Minimum 4 years of related work experience in wafer process engineering and/or equipment maintenance.</li><li>Experience in high volume production of electronics components in an MNC or semi-conductor industry.</li><li>WET Process experience on Wet Etch, WET Resist Strip /Lift off (Single wafer lift off) , Wafer cleaning processes.</li><li>Able to lead and Guide Junior Engineers.</li><li>Able develop new process based on process requirements.</li><li>Good knowledge of wafer fab manufacturing processes, equipment and materials and capable of applying them effectively at work.</li><li>Experience with Microsoft applications.</li></ul>

Responsibilities: <ul><li>Process owner of dry etch/plasma ashing equipment</li><li>Drive cost reduction, weed out unwarranted expenses/wastages, find alternative sources and improve processes with innovative solutions to raise efficiency.</li><li>Drive quality investigations and continuous improvement programs to resolve chronic process and quality issues, and institute permanent resolutions to assure product quality and enhance process robustness.</li><li>Enforce on line controls and execution to conform to work instructions and procedures. Apply hands-on and with deep involvement at work.</li><li>Coach, guide and train engineers and technicians in processes and problem solving and analysis to build up their technical competencies and achieve self-sustenance.</li><li>Take accountability of work and possesses strong sense of responsibility and team work.</li></ul> Requirements: <ul><li>Minimum Bachelor’s degree in Physics / Chemistry / Material Science/ Electronic or Electrical Engineering or equivalent.</li><li>Minimum 4 years of related work experience in wafer process engineering and/or equipment maintenance.</li><li>Experience in high volume production of electronics components in an MNC or semi-conductor industry.</li><li>Possess strong technical competencies in his field of study.</li><li>Good knowledge of statistical and quality tools.</li><li>Able to work under pressure and with strong commitment at work.</li><li>Experience with software applications such as MS Power Point, Excel and Word.</li></ul>

Responsibilities: <ul><li>Develop, maintain, and deploy FDC models to monitor equipment health, detect process faults, and identify abnormal tool or process behavior.&nbsp;</li><li>Design and implement R2R control solutions using feed-forward and feedback strategies to improve recipe control, metrology target achievement, and process stability.</li><li>Deploy, validate, standardize, and scale APC/FDC/R2R models and methodologies across production tools, processes. Collaborate with global teams to standardize APC methodologies across manufacturing sites.</li><li>Design and deploy predictive maintenance models to detect early signs of degradation, anomalies, and potential failures of tools.</li></ul> Requirements: <ul><li>Bachelor’s Degree in Computer Science or&nbsp;Electronic/Electrical Engineering, with preferably min. 2 years’ experience in semiconductor field</li><li>Experience deploying production FDC and/or R2R solutions is an added advantage</li><li>Excellent knowledge of applying manufacturing statistics, preferably in Semiconductor industry.</li><li>Foundational knowledge of machine learning models, algorithms, mathematics, and statistics is preferred.</li><li>Excellent knowledge of applying manufacturing statistics, preferably in Semiconductor industry.</li><li>Dynamic, initiative, resourceful, team player and highly self-motivated individual.</li><li>Strong organizational, leadership and interpersonal skills. (Senior/Staff)</li><li>Strong analytical mind. (Senior/Staff)</li></ul>

Responsibilities: <ul><li>Developing and executing account strategies to meet revenue targets and increase market share for automotive connectors and other key product folio</li><li>Focus on spec in company part into customer new project</li><li>Drive, report, monitor key metrics to achieve sales KPI which aligned with organization goal, which are new business wins (TERP), Revenue achievement and margin</li><li>Building and maintaining strong relationships with existing clients, including regular communication</li><li>Identifying and pursuing new business opportunities with potential clients in the appliance industry for 5 years revenue pipeline</li><li>Drive new business with customer engineer &amp; purchasing through sales &amp; marketing activities plan</li><li>Maintaining up-to-date knowledge of industry trends, competitors, and customer needs to drive sales growth</li><li>Collaborating with cross-functional teams in ASEAN and Global team, including sales, customer service, engineering, production, and quality assurance, to ensure consistent delivery of high-quality products and services, and other Sales KPI</li><li>Negotiating pricing, contracts, and delivery terms with clients to maximize profitability and customer satisfaction</li></ul> Requirements: <ul><li>Bachelor’s Degree required, preferably in Engineering education</li><li>High degree of integrity, Teamwork, Innovation and Accountability</li><li>Language: Excellent in English. Chinese is an advantage</li><li>Able to work in cross cultural especially in ASEAN countries and travelling</li><li>Preferably at least 5 years in sales or related field automotive industry (harness maker production field)</li><li>Customer service orientation</li><li>Demonstrate ability to collaborate cross functionally, cross regions</li><li>Strong verbal and written communication skills including presentation and computer skills (i.e. Power Point, Excel, Word, Salesforce, SAP and other tools)</li><li>Must be ambitious, exhibit strong results-orientation and execution characteristics</li><li>Ability to effectively organize, prioritize and accomplish multiple conflicting tasks, make intelligent, timely decisions and solve problems independently</li><li>Ability and willingness to travel as required, Domestic/ Overseas, 25% is travelling</li></ul>

Responsibilities: <ul><li>Interact with stakeholders regarding tasks, requirements, and clarifications.</li><li>Estimate the work received from stakeholders and align deliverables with the committed timelines.</li><li>Prepare 3D models and 2D drawings in accordance with our client standards.</li><li>Handle basic stamping design and stamping process related activities.</li><li>Demonstrate a proactive approach and apply lateral thinking to solve problems and improve processes.</li><li>Manage work hours and maintain accurate records of tasks and deliverables.</li></ul> Requirements: <ul><li>2 to 4 years of relevant experience.</li><li>Proficient with CAD software – 3D modelling, 2D drafting, and assembly.</li><li>Proficient with MS Office tools.</li><li>Knowledge of basic stamping design and stamping processes.</li><li>Basic knowledge in manufacturing processes.</li><li>Good communication skills for stakeholder interaction; proactive and capable of lateral thinking.</li></ul>

Responsibilities: <ul><li>Perform evaluations and/or analyze unique problems that are new to equipment.</li><li>Perform predictive maintenance by analyzing routine failures and determining adjustments and repairs that need to be made.</li><li>Perform training as needed to Lower level Maintenance Techs on troubleshooting and repair techniques utilized with equipment</li><li>Perform specified preventative maintenance on production equipment to prevent equipment downtime.</li><li>Monitor equipment operations to ensure proper usage.</li><li>Construct and/or assemble new equipment</li><li>Troubleshoot equipment failures and repair as needed</li><li>Perform specified preventative maintenance on production equipment to prevent equipment downtime</li><li>Perform Lock Out / Tag Out requirements.</li><li>Work from blueprints, manuals, sketches and verbal instructions.</li><li>Help repairing on hydraulic, pneumatic and electromechanical systems.</li><li>Perform other duties as assigned or necessary to meet business conditions or changes.</li><li>Adheres to quality and safety systems or maintenance of quality and safety standards.</li></ul> Requirements: <ul><li>Good communication skills, both oral and written</li><li>Min 1-3 years experience in manufacturing.</li><li>Ability to work independently</li><li>Must have good or corrected eyesight to insure quality of work</li><li>Ability to lift and carry 25 kg frequently</li><li>Ability to crouch, crawl, climb ladders, and work at various heights</li><li>Good basic math skills</li><li>Good mechanical aptitude, and troubleshooting ability</li><li>Must have a valid drivers license</li></ul>

Responsibilities: This position is responsible for mechanical maintenance and assembling automation systems in the manufacturing. <ul><li>Maintenance work on mechanical, electronic and pneumatic systems, including inspections, cleanings and lubrications.</li><li>Creation of machine safety concepts and machine data concepts.</li><li>Design and optimization of automation solutions for production plants using PLC controllers, robotics, industrial image processing, drive technology, testing technology, safety technology and other automation technologies.</li><li>Programming and commissioning of PLC controllers, safety controllers and HMI systems.</li><li>Mechanical design, assembly and wiring of machines and plants.</li><li>Integration of robotic systems and other automated components into existing production processes.</li><li>Functional tests and performance tests on automation systems, troubleshooting and optimization of control programs.</li><li>Preparation of technical documentation, operating instructions and training material.</li><li>Collaboration in planning and implementing projects for modernization and expansion of our production facilities.</li><li>Support in training of new employees in using new automation technologies.</li><li>Introduction of Industry 4.0 technologies (such as 3D printing, AMR, predictive maintenance, simulation, ).</li></ul> Requirements: <ul><li>Bachelors Degree in preferably mechanical engineering, automation engineering, mechatronics or a similar qualification.</li><li>Min 3 years of experience in industrial automation.</li><li>Knowledge of Cam-controlled machines like: Bihler (prefered), Wafios, Finzer.</li></ul>

Responsibilities:&nbsp; <ul><li>Develop and execute long‑term, account‑specific growth strategies for assigned strategic customers.&nbsp;</li><li>Build and sustain executive‑level relationships across customer organizations, serving as a trusted advisor.&nbsp;</li><li>Lead complex, multi‑stakeholder sales opportunities using consultative solution‑selling practices.&nbsp;</li><li>Coordinate cross‑functionally with sales, engineering, and services teams to deliver integrated customer solutions.&nbsp;</li><li>Apply deep market, customer, and technical insight to identify growth opportunities and mitigate risk.&nbsp;</li><li>Maintain accurate forecasts, opportunity plans, project pipeline and account strategies within CRM systems.&nbsp;</li><li>Responsible for developing and maintaining relationships with key HVAC OEM stakeholders</li><li>Develop deep understanding of customer strategy to champion appropriate support needs and HVAC product opportunities</li><li>Collaborate with and orchestrate internal account team members (e.g., Systems Engineer, Technical Sales Engineer, etc.) to ensure value propositions are appropriately delivered</li><li>Conduct periodic account planning to strategically identify expansion &amp; cross-sell opportunities</li><li>Lead contract and pricing negotiations with OEM customers</li><li>Serve as main point of contact for set of assigned accounts; route inquiries as necessary to Customer Success Reps</li><li>Conduct regular field visits to better understand customer processes and needs</li><li>Actively engages to stay updated on HVAC industry trends and competitor activity</li></ul> Requirements: <ul><li>Eight (10) or more years of experience in B2B or technical sales roles supporting complex customer environments.&nbsp;</li><li>Demonstrated success managing strategic or enterprise‑level customer accounts.&nbsp;</li><li>Advanced consultative selling, opportunity management, and negotiation skills.&nbsp;</li><li>Ability to engage and influence executive‑level customer stakeholders.&nbsp;</li><li>Strong written, verbal, and presentation communication skills.&nbsp;</li><li>Disciplined use of CRM tools to manage pipeline, forecasts, and account plans</li></ul>

Responsibilities:&nbsp; <ul><li>Support the implementation and enhancement of Enterprise Datahub using Databricks, ensuring seamless integration with existing BI and ERP systems.</li><li>Support complex BI and data platform initiatives while maintaining quality, delivery timelines, and alignment with organizational goals.</li><li>Collaborate with business stakeholders, architects, developers, and analysts to translate requirements into solutions.</li><li>Design, implement, test, and optimize moderately complex data pipelines, ETL/ELT flows, semantic layers, and report solutions with the development team.</li><li>Apply technical knowledge and AI-driven optimization opportunities to improve data quality, validation, reliability, and operational efficiency across supported solutions.</li><li>Develop new and impactful ideas, approaches, and automation opportunities that improve the platform, processes, and user experience.</li><li>Communicates moderately complex information clearly, accurately, and in a timely manner, adapting the message to the audience.</li></ul> Requirements: <ul><li>Degree in Business Informatics, Information Technology, Data Engineering/Analytics, Engineering, or a related field.</li><li>Proven experience in data engineering, application support, BI analytics, or related technical roles.</li><li>Strong expertise in Databricks, GitHub, dbt, ETL, Tableau, Power BI, and SQL.</li><li>Familiarity with Generative AI tools (e.g., Copilot, LLM-based assistants) to enhance productivity, development, and documentation.</li><li>Ability to analyze moderately complex problems independently and drive resolution with minimal supervision.</li><li>Strong stakeholder management, teamwork, and clear written and verbal communication skills.</li><li>Experience contributing to technical improvements, process optimization, and operational quality.Proficiency in English, both written and spoken.</li></ul>

Responsibilities: <ul><li>Manage full sets of accounts in accordance with US GAAP and applicable local GAAP.</li><li>Manage the month-end, quarter-end, and year-end closing processes, including conducting quality reviews.</li><li>Prepare and ensure the accuracy of statutory financial reports.</li><li>Coordinate and liaise with external parties such as auditors as required.</li><li>Ensure compliance to US GAAP, local GAAP and related international accounting standards.</li><li>Support organizational strategic initiatives within the organization.</li><li>Ability to work independently and under time constraints, to a high level of accuracy.</li><li>Undertake any other tasks and responsibilities as required.</li><li>Adhere to relevant quality, environmental, health, and safety management system requirements.</li></ul> Requirements: Basic Qualifications: <ul><li>MBA finance /MCOM/BCom, professional accounting qualification (CPA, CA, or equivalent) preferred.</li><li>5+ years of relevant accounting or auditing experience, preferably within a multinational company.</li><li>Fluent in English both written and spoken</li><li>Has a "can-do" attitude, pro-active, flexible mind-set</li><li>High level of accounting knowledge</li><li>Working knowledge of key systems (SAP, Excel, PowerPoint, Power BI etc.) is essential.</li><li>Is able to work in a dynamic environment and meet tight deadlines.</li><li>Good interpersonal and communication skills</li><li>Possess analytical and problem-solving skills.</li><li>Able to make sound and independent judgements.</li></ul>

Skills

Industry

Location

Jobtitle

176 safety health engineer Jobs found

Senior Process Engineer, Wet

Senior Process Engineer, Dry Etch

Product Engineer/Senior - FDC/R2R

Account Manager IV - Connected Living Solutions

MFG & Process DVL Engineer I

Maintenance Technician

Mechanical Maintenance Engineer - Automation Technology

Strategic Account Executive

Senior IT Engineer

Country Accountant

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

176 safety health engineer Jobs found

Senior Process Engineer, Wet

Senior Process Engineer, Dry Etch

Product Engineer/Senior - FDC/R2R

Account Manager IV - Connected Living Solutions

MFG & Process DVL Engineer I

Maintenance Technician

Mechanical Maintenance Engineer - Automation Technology

Strategic Account Executive

Senior IT Engineer

Country Accountant

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.