Compounding Technician

Filling Technician

Chief Executive Officer - Steel Industry

Senior Project Management Engineer

QC Lab Sample Coordinator

QE Specialist

Environmental Health and Safety (EHS) Manager

Operations Manager

Quality Engineer

Finance Controller

Responsibilities: <ul><li>Operate, monitor, and adjust sterile manufacturing equipment for formulation, filling, and packaging of IV bag products in compliance with SOPs, cGMP, and safety requirements.</li><li>Perform routine preventive maintenance and minor repairs on production equipment to maintain optimal operating conditions.</li><li>Serve as first-line troubleshooting support for equipment and process issues, escalating to engineering or maintenance as required.</li><li>Support equipment and process qualifications, including protocol review, execution participation, and documentation completion.</li><li>Assist in the creation, revision, and implementation of SOPs and production-related procedures.</li><li>Provide training, guidance, and on-the-job support to Production Technician I personnel.</li><li>Perform cleaning, changeover, and line clearance activities to maintain manufacturing operations.</li><li>Accurately complete batch records, logbooks, and production documentation in compliance with data integrity requirements and cGMP practices.</li><li>Review documentation completed by fellow members of the production team.</li><li>Collaborate with Quality Assurance during in-process checks, deviation investigations, and CAPA activities.</li><li>Adhere to DEA and site procedures for controlled substance handling, including documentation and security protocols.</li><li>Work closely with cross-functional teams including Engineering, Validation, and Quality to support operational readiness.</li><li>Operate isolator technology, including performing and verifying sanitization steps, and supporting advanced troubleshooting.</li><li>Ensure controlled substances are handled, documented, and stored per DEA and site requirements.</li><li>Participate in continuous improvement and lean manufacturing initiatives to enhance safety, quality, and efficiency.</li></ul> Requirements: Qualifications / Experience <ul><li>High school diploma or equivalent required; associate degree or technical certification in a mechanical, engineering, or life sciences discipline preferred.</li><li>Minimum of 5 years’ experience in pharmaceutical or regulated manufacturing in areas of compounding, filling, inspection, and secondary packaging. Experience with sterile products or IV bag production preferred.</li><li>Demonstrated mechanical aptitude with hands-on equipment troubleshooting and maintenance skills.</li><li>Knowledge of cGMP, aseptic processing, and controlled substance handling requirements.</li><li>Minimum of 3 years’ experience working with automated production equipment utilizing HMI or SCADA interface required.</li><li>Experience with isolator-based manufacturing strongly preferred.</li><li>Experience reading and following technical documents such as SOPs, maintenance procedures, electrical drawings, equipment arrangements, piping diagrams, and qualification protocols</li></ul> Skills / Competencies <ul><li>Demonstrated problem-solving and mechanical troubleshooting skills.</li><li>Ability to mentor and train less experienced technicians.</li><li>Excellent attention to detail and documentation accuracy.</li><li>Effective communication and teamwork skills.</li><li>Commitment to safety, quality, and data integrity.</li><li>At home working in cleanroom environments with PPE requirements.</li></ul>

Responsibilities: <ul><li>Operate, monitor, and adjust sterile manufacturing equipment for formulation, filling, and packaging of IV bag products in compliance with SOPs, cGMP, and safety requirements.</li><li>Perform routine preventive maintenance and minor repairs on production equipment to maintain optimal operating conditions.</li><li>Serve as first-line troubleshooting support for equipment and process issues, escalating to engineering or maintenance as required.</li><li>Support equipment and process qualifications, including protocol review, execution participation, and documentation completion.</li><li>Assist in the creation, revision, and implementation of SOPs and production-related procedures.</li><li>Provide training, guidance, and on-the-job support to Production Technician I personnel.</li><li>Perform cleaning, changeover, and line clearance activities to maintain manufacturing operations.</li><li>Accurately complete batch records, logbooks, and production documentation in compliance with data integrity requirements and cGMP practices.</li><li>Review documentation completed by fellow members of the production team.</li><li>Collaborate with Quality Assurance during in-process checks, deviation investigations, and CAPA activities.</li><li>Adhere to DEA and site procedures for controlled substance handling, including documentation and security protocols.</li><li>Work closely with cross-functional teams including Engineering, Validation, and Quality to support operational readiness.</li><li>Operate isolator technology, including performing and verifying sanitization steps, and supporting advanced troubleshooting.</li><li>Ensure controlled substances are handled, documented, and stored per DEA and site requirements.</li><li>Participate in continuous improvement and lean manufacturing initiatives to enhance safety, quality, and efficiency.</li></ul> Requirements: Qualifications / Experience&nbsp; <ul><li>High school diploma or equivalent required; associate degree or technical certification in a mechanical, engineering, or life sciences discipline preferred.</li><li>Minimum of 5 years’ experience in pharmaceutical or regulated manufacturing in areas of compounding, filling, inspection, and secondary packaging. Experience with sterile products or IV bag production preferred.</li><li>Demonstrated mechanical aptitude with hands-on equipment troubleshooting and maintenance skills.</li><li>Knowledge of cGMP, aseptic processing, and controlled substance handling requirements.</li><li>Minimum of 3 years’ experience working with automated production equipment utilizing HMI or SCADA interface required.</li><li>Experience with isolator-based manufacturing strongly preferred.</li><li>Experience reading and following technical documents such as SOPs, maintenance procedures, electrical drawings, equipment arrangements, piping diagrams, and qualification protocols</li></ul> Skills/Competencies <ul><li>Demonstrated problem-solving and mechanical troubleshooting skills.</li><li>Ability to mentor and train less experienced technicians.</li><li>Excellent attention to detail and documentation accuracy.</li><li>Effective communication and teamwork skills.</li><li>Commitment to safety, quality, and data integrity.</li><li>At home working in cleanroom environments with PPE requirements.</li></ul>

Responsibilities:&nbsp; Strategic &amp; Financial Leadership <ul><li>Identify growth avenues including capacity expansion, new product lines (TMT grades, wire rods, structural steel), and new geographies.</li><li>Lead annual business planning and budgeting in alignment with the Board’s goals.</li></ul> Operational Excellence <ul><li>Oversee end-to-end plant operations including melting, rolling mill operations, quality control, logistics, and dispatch.</li><li>Drive productivity improvements, yield optimisation, and equipment uptime using best industry practices.</li><li>Ensure strict adherence to quality standards such as BIS norms for TMT bars (Fe500D, Fe550D, etc.).</li><li>Implement safety, statutory compliance, and sustainability practices across all units.</li></ul> Budgeting, Forecasting <ul><li>Develop and implement long-term strategic plans aligned with the company’s vision and market opportunities.</li><li>Monitor production cost elements (raw material sourcing, power &amp; fuel, conversion costs) and lead cost-reduction initiatives.</li></ul> Commercial &amp; Market Leadership <ul><li>Maintain strong relationships with key customers, vendors, and industry stakeholders.</li><li>Build and mentor a high-performing leadership team across production, quality, finance, HR, and marketing.</li><li>Foster a culture of discipline, transparency, accountability, and continuous improvement.</li></ul> Compliance &amp; Risk Management <ul><li>Ensure adherence to all statutory, environmental, and safety regulations related to steel manufacturing.</li></ul> Requirements: <ul><li>B.Tech/B.E. in Metallurgy, Mechanical, Electrical, or related engineering field.</li><li>20+ years in steel/TMT bar manufacturing, with at least 5 years in a senior leadership/CEO/COO role.</li></ul>

Responsibilities: Project Timeline: <ul><li>Identify and align projects goals and scope with PJM and PM, and breakdown tasks of tooling/process developments and qualification</li><li>Make/align tooling development and qualification timeline, assign tasks to Ops team include tooling development, materials purchase</li><li>Track and manage core team to execute project progress based on committed project schedule</li></ul> Project Cost: <ul><li>Lead Ops to simulate sample cost and production cost to achieve project landing zone target, lead Ops to optimize launch cost to the best</li><li>Budget and control scrap cost though leverage design and manufacturing process to meet project target during NPI phase</li></ul> Project Execution: <ul><li>Guide capacity planning, materials sourcing and manpower to support all builds in the plant.</li><li>Oversee the progression of tooling/process development, identify bottleneck and issues, organize Ops team to improve those bottleneck and issues.</li><li>Oversee risks assessment in project execution, stay interlock with PJM to make multigation plan and conduct the planned activities in Ops.</li><li>Finalize the Safe Launch plan for the appropriate mix of product, tool capability and demand with the approval of the PjM, Quality, MDPE, and PjE. a. Lead Safe Launch team meetings to assure successful HVM startup and manufacturing process qualification for attainment of required metrics for successful G5 handoff.</li><li>Align the budget with Ops team with the tooling list provided by MPDE-A, control total capital spending against CER.</li><li>Lead and coordinate line setup to conduct LVM sample builds and coordinate HVM tool builds.</li><li>Lead Ops to make ramp up plan, include materials, operations and tool capacity ramp up, ensure manufacture team take over production control smoothly after G5.</li></ul> Product Sustaining: <ul><li>Product migration, as a receiving or sending leader to execute product move in or move out, including project timeline, investment, cost control, machine/material/manpower preparation, safety stock, safe launch, etc.</li><li>Lead product capacity analysis and expand it through re-investment per estimation.</li></ul> Requirements: <ul><li>Bachelor degree, engineering background is better</li><li>PMP certification preferred</li><li>At least 5 years related working experience in project management, 1~2 years experience in connector/cable/cable assembly is better</li></ul>

Responsibilities: Sample Management <ul><li>Performs QC sample/reference standard/chromatographic column receipt, processing, distribution for testing and storage.</li><li>Performs QC sample reconciliation and disposal.</li><li>Tracks inventory of product samples, stability samples, and test materials in the lab.</li><li>Uses laboratory software for sample, reference standard, chromatographic column management.</li><li>Verifies accuracy of labeling/documentation provided with samples.</li><li>Informs QC Coordinator if chemical or reference standard is expired for removal from laboratory area.</li><li>Send samples for outside testing. Submit samples to the appropriate labs for testing.</li><li>Create and maintain reports including quality data trending, informational spreadsheets, laboratory log spreadsheets.</li><li>Compile a list of necessary laboratory supplies specifically reference standards, contacting vendors to obtain quotes.</li><li>Uses the purchasing system to procure laboratory supplies.</li><li>Provide status updates to QC management and other departments regarding the submission of samples.</li><li>Maintain a safe work environment by following standards and procedures and complying with legal regulations.</li></ul> Lab Equipment <ul><li>Maintains, operates equipment and instruments supporting sample processing.</li><li>Provides general laboratory support such as routine instrument cleaning/preventative maintenance/calibration, sample receiving, chemical inventory, document filing and housekeeping.</li><li>Works with internal resources to maintain lab in an optimal state. Cleans lab working surfaces and disposes of any excess chemicals, solutions, solvents, etc. in the special waste containers for each class of waste chemicals.</li><li>Under close supervision, learns to troubleshoot basic instrument problems.</li></ul> Investigations&nbsp; <ul><li>Escalates any trends/events to the QC Lab Manager.</li><li>Escalates any sample and reference standard documentation issues to the QC Lab Manager.</li><li>With guidance, participates in OOS/OOT/NOE and other investigations.</li><li>Assists, as and when needed, scientists working in the laboratory.</li><li>May assist in drafting, editing, and reviewing SOPs.</li></ul> Training <ul><li>Maintains assigned training records current and in-compliance.</li><li>May assist in the training of laboratory staff.</li></ul> Compliance&nbsp; <ul><li>Performs assigned work in a timely and safe manner conforming to regulatory, company and compendia requirements within pharmaceutical manufacturing setting.</li><li>Documents accurately data generated in notebooks/worksheets/LIMS in compliance with SOPs.</li><li>Follows internal processes related to controlled substances.</li></ul> Safety <ul><li>Follows EH&amp;S procedures to ensure a safe work environment.</li><li>Follows all applicable safety and standards guidelines, such as SOPs, cGMP, DEA regulations good documentation practice and/or MSDS.</li></ul> Requirements: Education &amp; Experience <ul><li>College graduate, preferably in a Science related field.</li><li>Laboratory experience related to sample management preferred.</li></ul> Knowledge <ul><li>Basic knowledge of sample management in a laboratory environment.</li><li>Some knowledge of applicable safety and standards guidelines: SOP, cGMP, GLP, DEA regulations and/or MSDS.</li><li>Competency in Microsoft Office Suite.</li><li>Proficiency with computer savvy.</li></ul> Skills &amp; Abilities <ul><li>Ability to display and analyze data in a logical manner.</li><li>Good verbal and written communication skills as well as good computer skills.</li><li>Attention to details and accurate record keeping.</li><li>Establish and maintain cooperative working relationships with others.</li><li>Solid organizational skills</li><li>Ability to take initiative, set priorities and follow through on assignments.</li></ul> Physical Requirements <ul><li>Extended periods of sitting, standing, walking, reaching, climbing/balancing, kneeling/crouching/crawling, looking at monitor for extended periods, moderate noise levels and potential business travel.</li><li>Work is in an FDA and DEA-regulated pharma lab environment with risk of exposure to various chemicals.</li><li>Must occasionally lift and/or move up to 15-25 lbs.</li><li>Ability to wear personal protective equipment, including respirators, gloves, etc.</li><li>Specific visions abilities are required by this job include close vision and color vision</li><li>Ability to occasionally tolerate significant differences in temperature and/or humidity for short periods.</li></ul>

Responsibilities: <ul><li>Provide real-time QA oversight on the production floor, in warehouse areas, and during qualification activities.</li><li>Perform batch record and logbook review, ensuring accuracy, completeness, and compliance with GDP standards.</li><li>Execute and document line clearance and room readiness inspections prior to manufacturing activities.</li><li>Review qualification and validation protocols for clarity, compliance, and alignment with regulatory and internal quality expectations.</li><li>Support execution of qualification protocols by providing on-site quality presence during testing and ensuring deviations are properly documented and escalated. 6.	Initiate, investigate, and support closure of deviations, non-conformances, and CAPAs related to manufacturing and qualification activities.</li><li>Collaborate with cross-functional teams to ensure timely and compliant execution of commissioning, qualification, and validation activities.</li><li>Support the development and maintenance of site-specific quality procedures (SOPs, work instructions, forms) governing manufacturing, warehousing, engineering, maintenance, and validation operations.</li><li>Review and approve site procedures to ensure clarity and compliance with cGMP standards.</li><li>Maintain awareness of site policies, cGMP regulations, and evolving regulatory expectations applicable to sterile injectable operations.</li><li>Participate in internal walkthroughs, audit preparations, and readiness activities for regulatory inspections.</li><li>Support the implementation of continuous improvement initiatives and site quality metrics.</li></ul> Requirements: Qualifications/Experience <ul><li>Bachelor’s degree in a scientific, engineering, or technical discipline (e.g., Biology, Chemistry, Pharmacy, Engineering)</li><li>2–5 years of experience in quality assurance, manufacturing, or validation in a cGMP-regulated pharmaceutical or biotech manufacturing environment</li><li>Working knowledge of FDA, EU, and ICH guidelines related to sterile manufacturing, validation, and data integrity</li><li>Experience supporting commissioning and qualification activities is strongly preferred</li><li>Familiarity with GDP, batch record review, and deviation documentation processes</li></ul> Skills/Competencies <ul><li>Strong attention to detail and commitment to compliance</li><li>Solid written and verbal communication skills</li><li>Ability to work collaboratively across departments in a fast-paced environment</li><li>Comfortable supporting shop-floor activities and cross-functional execution teams</li><li>Proficient in using quality systems and document management tools</li><li>Flexible and adaptable to changing priorities and evolving project timelines</li><li>Commitment to data integrity, continuous improvement, and patient safety</li></ul>

Responsibilites: <ul><li>Develop and implement site-wide EHS programs aligned with federal, state, and local regulations, including OSHA, EPA, and DEA requirements for controlled substances.</li><li>Lead risk assessments, job hazard analyses (JHAs), and containment evaluations, particularly in areas handling high-potent and controlled substances.</li><li>Serve as the primary liaison for EHS-related aspects of DEA compliance, supporting controlled substance handling protocols in collaboration with Quality, Security, and Operations.</li><li>Oversee the environmental and safety controls for controlled substances, ensuring proper ventilation, storage, access restrictions, spill response, and waste disposal procedures in compliance with DEA and EPA regulations.</li><li>Develop and maintain physical and procedural controls related to controlled substance areas (e.g., vaults, restricted labs, destruction processes) in partnership with Security and Regulatory Affairs.</li><li>Lead the investigation and root cause analysis of all incidents, near-misses, and controlled substance discrepancies, and implement corrective/preventive actions.</li><li>Ensure training and education of site personnel in EHS best practices, with a focus on potent compound safety, exposure monitoring, and controlled substance handling protocols.</li><li>Implement industrial hygiene programs, including monitoring of airborne concentrations and potential operator exposure to potent and hazardous compounds.</li><li>Establish robust programs for emergency preparedness, including chemical spills, fires, security threats, and controlled substance incidents.</li><li>Maintain all required permits, records, and documentation related to hazardous waste, emissions, safety incidents, and controlled substance EHS compliance.</li><li>Partner with Engineering, Validation, and Operations to incorporate EHS and security standards into facility, utility, and equipment design and commissioning.</li><li>Foster a strong culture of safety, accountability, and environmental stewardship at all levels of the organization.</li></ul> Requirements: <ul><li>Bachelor’s degree in Environmental Science, Occupational Health &amp; Safety, Chemical Engineering, or related field (Master’s preferred).</li><li>Minimum of 7–10 years of progressive EHS experience in a GMP-regulated pharmaceutical or biotechnology manufacturing environment.</li><li>Direct experience managing EHS compliance for controlled substances (DEA Schedules II–V) and high-potency APIs strongly preferred.</li><li>In-depth knowledge of OSHA, EPA, DEA, NJDEP, and global EHS regulations and guidelines.</li><li>Familiarity with industrial hygiene, containment technologies, and safe handling procedures for potent compounds</li><li>Experience leading EHS activities during greenfield/startup site development and qualification is a plus.</li></ul>

Responsibilities: Policies and Procedures (10%): <ul><li>Develop and implement the manufacturing related policies and procedures in order to align with government regulation and corporate policy, organize the formulation of the responsibilities of management personnel at all levels, and optimize the internal structure and staffing.</li><li>Develop and implement assembly function budget and plan allocate function target to subordinates and monitor the achievement of the budget and overall performance in order to achieve targeted of Plant performance.&nbsp;</li></ul> People Management (15%): <ul><li>Allocate and balance work across direct reports&nbsp;&nbsp;</li><li>Review and provide timely performance feedback to direct reports&nbsp;&nbsp;</li><li>Mentor, develop and motivate them&nbsp;</li><li>Help resolve people/functional issues in the team&nbsp;</li><li>Submit manpower application and interview the candidates in order to achieve targeted department performance and retain key talent.&nbsp;</li></ul> Production (25%): <ul><li>Supervise and monitor the production activities and process&nbsp;</li><li>Help to solve critical production issues&nbsp;</li><li>Cooperate with other functions within molding department and other departments in getting necessary support in order to ensure the normal day-to-day production.&nbsp;</li></ul> Assembly (25%):&nbsp; <ul><li>Review the maintenance plan&nbsp;</li><li>Monitor the maintenance plan execution&nbsp;</li><li>Approve the Purchase Request for spare parts&nbsp;</li><li>Provide overall mold/Die/Tool maintenance instruction and monitor the execution in order to ensure the normal operation of die and improve daily operating efficiency.&nbsp;</li></ul> Equipment maintenance (5%): <ul><li>Review the maintenance plan&nbsp;</li><li>Monitor the maintenance plan execution&nbsp;</li><li>Approve the Purchase Request for equipment and parts&nbsp;</li><li>Provide overall equipment maintenance instruction and monitor the execution in order to ensure equipment operate reliably and improve daily operating efficiency.&nbsp;</li></ul> Engineering (10%):&nbsp; <ul><li>Allocate new projects to engineers&nbsp;</li><li>Monitor the new project process and control the cost and schedule&nbsp;</li><li>Provide cross functions/departments coordination&nbsp;</li><li>Help to solve critical technical issues in order to ensure the successful completion of the project.&nbsp;</li></ul> EHS (5%):&nbsp; <ul><li>Formulate and perfect the department EHS management system and operational procedures, and ensure the effective implementation.&nbsp;</li><li>Fully understand and implement EHS responsibilities to ensure EHS work in department meets relevant requirements&nbsp;</li><li>Set departmental and individual EHS performance targets according to laws and regulations and requirements of the company, and check and evaluate the completion of the targets regularly&nbsp;</li><li>Check the safety situation of production site regularly to eliminate all kinds of unsafe factors and prevent accidents.&nbsp;</li></ul> Project Management and Activity (10%):&nbsp; <ul><li>To reduce the costs and improve efficiency of the department, organize and plan key improvement projects, and monitor the implementation of these projects (Tebit Saving, Kaizen)&nbsp;</li><li>In order to improve and cooperate with the plant in implementing the excellent operation objectives, actively participate in training and use tools for improvement, such as VS Transformation, CCF, etc.</li></ul> Requirements: <ul><li>Bachelor and above Degree&nbsp;</li><li>Good English skills (written and oral)&nbsp;</li><li>Min. 10 years shopfloor management experiences in elec. Industry, above two years on managerial positions&nbsp;</li><li>Solid Lean/6 Sigma knowledge and project experiences&nbsp;</li><li>Familiar with quality system and tools&nbsp;</li><li>Rich experiences in operator training and development&nbsp;</li><li>Planning knowledge and experiences&nbsp;</li><li>Proficient PC skills.</li></ul>

Responsibilities: Provide review and drive to approval of the validation protocols and reports for facility, equipment, laboratory instrument, and utility systems. <ul><li>Review and approval of technology/method transfer protocols and reports.</li><li>Review and evaluation of change controls</li><li>Review and approval of deviations and assurance that they define root causes and determine appropriate CAPA.</li><li>Participate in cross-functional teams to support execution of commissioning, installation qualification (IQ), operational qualification (OQ), performance qualification (PQ), and validation protocols.</li><li>Provide quality presence during qualification execution, ensuring data integrity, deviation management, and proper documentation of results.</li><li>Support the timely review and approval of executed qualification documentation and ensure readiness for inspection or submission.</li><li>Drive timely and compliant resolution of deviations, non-conformances, and CAPAs arising during operations and qualification activities.</li><li>Develop, implement, and maintain site-specific quality procedures (SOPs, work instructions, forms) governing validation, change control, deviation, and other SOPs relevant to the responsibilities</li><li>Review and approve site procedures to ensure clarity and compliance with cGMP standards.</li><li>Ensure proper execution of Good Documentation Practices (GDP) in all QA-reviewed documents, including validation records, logbooks, and manufacturing records.</li><li>Act as a QA representative during regulatory inspections, internal audits, and customer audits, with emphasis on operational and qualification-related topics.</li><li>Monitor key quality metrics and drive performance improvements in areas such as deviation reduction, batch record right-first time, and qualification readiness.</li><li>Contribute to the continued inspection readiness of the site, including periodic walkthroughs and risk-based quality improvements.</li></ul> Requirements: Qualifications/Experience <ul><li>Bachelor’s degree in engineering or technical discipline (e.g., engineering, Biology, Chemistry, Pharmacy).</li><li>5+ years of experience in pharmaceutical manufacturing QA, including direct involvement in qualification/validation activities.</li><li>Prior experience reviewing or approving qualification protocols and validation reports in GMP environments.</li><li>Familiarity with aseptic manufacturing, sterile injectable processes, and cleanroom environments.</li><li>Knowledge of FDA cGMPs, ICH Q8-Q10 guidelines, EU Annex 1, and risk-based qualification approaches.</li><li>Experience supporting regulatory inspections and validation documentation reviews.</li></ul> Skills/Competencies <ul><li>Strong knowledge of validation principles and qualification documentation expectations.</li><li>Effective team leader with experience supervising QA staff and coordinating cross-functional support.</li><li>Excellent organizational and communication skills with high attention to detail.</li><li>Ability to work collaboratively with operations, engineering, and validation stakeholders.</li><li>Sound judgment and decision-making under pressure in a dynamic manufacturing environment.</li><li>Commitment to data integrity, continuous improvement, and patient safety.</li></ul>

Responsibilities: <ul><li>Management of finance team to ensure delivery of timely, accurate monthly accounts, preparation of the financial pack and KPIs.</li><li>The key focus will be to drive financial and business improvements in the Filter Products manufacturing site and to act as a business partner to the local GM and management team.</li><li>Support is also required for the local Distribution business.</li><li>Review site month end financials, prepare variance analysis with supporting commentary consolidate for the Hungary region.</li><li>Drive site Gross margin and Non-productive spend initiatives.</li><li>Prepare and review customer and product analysis (pricing, revenue and margin).</li><li>Drive working capital improvements including cash collection and inventory management.</li><li>Ensure that standard costs are maintained and implemented across the product range in the Filter Products manufacturing site.</li><li>Review site control files and trial balances to ensure no financial risk to the business and instil robust financial controls.</li><li>Ensure that all sites comply with the Filtrona Accounting Manual (EAM).</li><li>To support the businesses in the preparation of the annual Plan and quarterly forecasts for the region and associated presentations and packs.</li><li>Review of all capex appraisals pre sign off and follow up on actual spend v plan.</li><li>Attend and present the financials at the monthly operational reviews.</li><li>Legal and banking signatory for the Filter Products business and sign off monthly payroll run.</li><li>Review monthly FX hedging forecasts and submissions to Group Treasury</li><li>Deal with Group, SBU and Regional FD requests</li><li>Lead the preparation for the Hungarian internal and external audits.</li><li>Develop staff and identify training needs within the team. Document standard procedures.</li><li>Keeping the HSE-, fire safety- and hygiene rules, wearing the relevant personal protective equipment.</li><li>During the daily work meeting the expectations of the Integrated Management System regulations.</li></ul> Requirements: <ul><li>Educated to degree level (potentially in Finance, Accounting, or Economics); professional accounting qualification.</li><li>10 years PQ experience within a manufacturing environment is essential.</li><li>High level of numeracy and IT literate (Excel/PowerPoint).</li><li>Excellent English written and oral communication skills.</li><li>Audit background</li><li>ERP system knowledge</li><li>Project management knowledge and experience</li></ul>

Skills

Industry

Location

Jobtitle

58 safety Jobs found

Compounding Technician

Filling Technician

Chief Executive Officer - Steel Industry

Senior Project Management Engineer

QC Lab Sample Coordinator

QE Specialist

Environmental Health and Safety (EHS) Manager

Operations Manager

Quality Engineer

Finance Controller

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

58 safety Jobs found

Compounding Technician

Filling Technician

Chief Executive Officer - Steel Industry

Senior Project Management Engineer

QC Lab Sample Coordinator

QE Specialist

Environmental Health and Safety (EHS) Manager

Operations Manager

Quality Engineer

Finance Controller

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.