Environmental Health and Safety (EHS) Manager

Senior Electrical Engineer

C# Developer (SSE)

QC Chemist

Senior Microbiology Technician

Microbiology Technician

Front of House Coordinator

Staff Software Engineer(Enterprise)

Staff Quality & Reliability Engineer

Mechanical Engineer

Responsibilites: <ul><li>Develop and implement site-wide EHS programs aligned with federal, state, and local regulations, including OSHA, EPA, and DEA requirements for controlled substances.</li><li>Lead risk assessments, job hazard analyses (JHAs), and containment evaluations, particularly in areas handling high-potent and controlled substances.</li><li>Serve as the primary liaison for EHS-related aspects of DEA compliance, supporting controlled substance handling protocols in collaboration with Quality, Security, and Operations.</li><li>Oversee the environmental and safety controls for controlled substances, ensuring proper ventilation, storage, access restrictions, spill response, and waste disposal procedures in compliance with DEA and EPA regulations.</li><li>Develop and maintain physical and procedural controls related to controlled substance areas (e.g., vaults, restricted labs, destruction processes) in partnership with Security and Regulatory Affairs.</li><li>Lead the investigation and root cause analysis of all incidents, near-misses, and controlled substance discrepancies, and implement corrective/preventive actions.</li><li>Ensure training and education of site personnel in EHS best practices, with a focus on potent compound safety, exposure monitoring, and controlled substance handling protocols.</li><li>Implement industrial hygiene programs, including monitoring of airborne concentrations and potential operator exposure to potent and hazardous compounds.</li><li>Establish robust programs for emergency preparedness, including chemical spills, fires, security threats, and controlled substance incidents.</li><li>Maintain all required permits, records, and documentation related to hazardous waste, emissions, safety incidents, and controlled substance EHS compliance.</li><li>Partner with Engineering, Validation, and Operations to incorporate EHS and security standards into facility, utility, and equipment design and commissioning.</li><li>Foster a strong culture of safety, accountability, and environmental stewardship at all levels of the organization.</li></ul> Requirements: <ul><li>Bachelor’s degree in Environmental Science, Occupational Health &amp; Safety, Chemical Engineering, or related field (Master’s preferred).</li><li>Minimum of 7–10 years of progressive EHS experience in a GMP-regulated pharmaceutical or biotechnology manufacturing environment.</li><li>Direct experience managing EHS compliance for controlled substances (DEA Schedules II–V) and high-potency APIs strongly preferred.</li><li>In-depth knowledge of OSHA, EPA, DEA, NJDEP, and global EHS regulations and guidelines.</li><li>Familiarity with industrial hygiene, containment technologies, and safe handling procedures for potent compounds</li><li>Experience leading EHS activities during greenfield/startup site development and qualification is a plus.</li></ul>

Responsibilities: <ul><li>Meeting with the product engineers to determine product testing parameters.</li><li>Conducting quality assurance and designing performance tests using the new testing procedures.</li><li>Troubleshooting any errors and streamlining the testing procedures. Ensuring all tests and procedures meet company and industry standards.</li><li>Preparing test reports for management.</li></ul> Requirements: <ul><li>BS Degree in Engineering or Science, 5+ years’ experience related to primary job function, Electrical Engineering preferred.</li><li>Experience with software such as Altium, Ultiboard, Multisim, AutoCAD, Space Claim, Creo, and LabVIEW desirable.</li><li>Experience with solid state power switching highly desirable.</li><li>Familiarity with 270Vdc and 1000Vdc applications desirable.</li><li>Effective communication and presentation skills required.</li><li>Ability to maintain focus and complete tasks independently and on time.</li><li>This position requires access to information which is subject to stringent controls under the International Traffic in Arms Regulations (ITAR) or Export Administration Regulations (EAR). Candidates must be a U.S. citizen or national, U.S. lawful permanent resident, person granted asylee status in the U.S., or person admitted into the U.S. as a refugee.</li></ul>

Responsibilities: <ul><li>Develop distributed system architecture and system integration&nbsp;&nbsp;</li><li>Design event-driven applications leveraging microservices architecture on cloud platform&nbsp;</li><li>Carry out Model and assess complex IT solutions&nbsp;&nbsp;</li><li>Work closely with platform engineers and other IT professionals to choose compatible design solutions&nbsp;</li><li>Manage and comply with release management process&nbsp;</li><li>Analyze the scope and expected organizational impact of information systems&nbsp;</li><li>Evaluate existing systems and provide advice on how to meet organizational requirements&nbsp;</li><li>Ensure that the technical components of the project are in sync with the business needs of the organization&nbsp;</li><li>Ensure that information systems are secure from threat&nbsp;</li><li>Provide advice on project design, project costs, and expected benefit&nbsp;</li><li>Identifies technical debt and proactively recommends alternatives or improvements&nbsp;</li></ul> Requirements: <ul><li>University degree in Computer Science, Computer Engineering or related subjects preferred&nbsp;&nbsp;</li><li>8+ years of work experience building applications&nbsp;</li><li>Advanced understanding of IT infrastructure and enterprise architectures&nbsp;</li><li>Proven experience with microservices-based architecture&nbsp;</li><li>Proficiency in coding with modern programming languages such as C#, Python, or Node.js&nbsp;</li><li>API-first development experience&nbsp;</li><li>Experience with Cloud Computing (Azure preferable)&nbsp;</li><li>Extensive expertise in any modern document-oriented database, with a preference for MongoDB&nbsp;</li><li>Experience in developing components for Event-Driven Architecture, with a minimum of production-level experience using Event Hubs or Event Grid (or similar technologies like Kafka)&nbsp;</li><li>Experience working in an agile environment with a focus on engineering practices like testing, continuous integration, etc.&nbsp;</li><li>Good knowledge of virtualization&nbsp;&nbsp;</li><li>Analytics mindset with critical thinking and problem-solving skills&nbsp;</li><li>Fine knowledge of industry trends and emerging technologies&nbsp;</li><li>Fluent in English&nbsp;</li></ul>

Role Description: <ul><li>The QC Chemist will be a critical member of the laboratory team responsible for performing analytical testing to ensure the quality, safety, and compliance of sterile injectable IV bag products at a newly established greenfield pharmaceutical manufacturing facility.</li><li>This role will support the development, validation, and execution of analytical methods, ensure timely release of raw materials, in-process samples, and finished products, and maintain strict adherence to cGMP, FDA, and global regulatory standards.</li><li>The QC Chemist will play a key role in establishing laboratory operations during the startup phase and sustaining high standards of laboratory excellence throughout routine commercial production.</li></ul> Responsibilities: <ul><li>Perform analytical testing of raw materials, in-process samples, stability samples, and finished products using validated methods (e.g., HPLC, GC, UV-Vis, FTIR, TOC, etc.).</li><li>Develop and validate new analytical methods as required to support product development, regulatory submissions, and process optimization.</li><li>Ensure compliance with cGMP, FDA, USP, and other regulatory standards in all laboratory activities, documentation, and data integrity.</li><li>Prepare and review laboratory documentation including test protocols, reports, COAs, deviations, OOS investigations, and change control documentation.</li><li>Maintain laboratory instruments, perform routine calibrations, troubleshooting, and coordinate with vendors for preventive maintenance and repairs.</li><li>Support laboratory readiness for regulatory inspections, audits, and customer visits by maintaining audit-ready documentation and laboratory practices.</li><li>Assist in the preparation and execution of laboratory investigations, CAPA implementation, and root cause analysis for any analytical deviations.</li><li>Collaborate with cross-functional teams including Manufacturing, Quality Assurance, Validation, and Regulatory Affairs to ensure seamless batch release and product compliance.</li><li>Participate in training programs to ensure technical competency and adherence to evolving regulatory requirements.</li><li>Contribute to continuous improvement initiatives focused on laboratory efficiency, data integrity, and compliance robustness.</li></ul> Requirements: Qualifications/Experience: <ul><li>Bachelor’s or master’s degree in chemistry, Pharmaceutical Sciences, or related field.</li><li>3+ years of experience in pharmaceutical QC laboratory, preferably in sterile injectable manufacturing.</li><li>Strong hands-on experience with analytical instrumentation (HPLC, GC, UV, FTIR, etc.) and GMP-compliant laboratory operations.</li><li>Knowledge of FDA cGMP regulations, USP standards, ICH guidelines, and data integrity expectations.</li><li>Experience supporting laboratory investigations and regulatory inspections.</li></ul> Skills/Competencies: <ul><li>Strong analytical and problem-solving skills.</li><li>High attention to detail and accuracy in laboratory work.</li><li>Good understanding of data integrity and documentation practices.</li><li>Ability to work both independently and as part of a team in a dynamic startup environment.</li><li>Excellent organizational, time management, and communication skills.</li><li>Ability to adapt to evolving processes and regulatory requirements in a greenfield manufacturing setting.</li></ul>

Responsibilities: <ul><li>Perform and oversee complex microbiological activities, including environmental monitoring (viable and non-viable), utility sampling (e.g., water, compressed gases), and aseptic process support in areas utilizing isolator technology.</li><li>Conduct and review microbiological testing for bioburden, endotoxin (LAL), sterility, and microbial identification on raw materials, in-process samples, and final products.</li><li>Support and lead aspects of aseptic process simulations (media fills) including planning, execution, incubation, and interpretation of results within isolator systems.</li><li>Assist in the startup and qualification of the microbiology laboratory including equipment qualification, SOP development, method verification/validation, and environmental monitoring qualification.</li><li>Contribute to investigations, non-conformances, and microbiological excursions by providing subject matter expertise and supporting root cause analysis and CAPA implementation.</li><li>Ensure accurate and timely documentation of laboratory data in compliance with data integrity principles and cGMP guidelines.</li><li>Mentor and provide technical guidance to junior microbiology staff, fostering a culture of scientific excellence, compliance, and continuous learning.</li><li>Maintain laboratory readiness for internal and external audits by following and enforcing good laboratory practices and cGMP expectations.</li><li>Participate in ongoing improvements to laboratory procedures, contamination control strategies, and sterility assurance programs.</li><li>Interface cross-functionally with Quality Assurance, Manufacturing, Validation, and Engineering to support cleanroom and equipment qualifications, isolator decontamination cycles, and site expansion activities.</li></ul> Requirements: Qualifications/Experience: <ul><li>Bachelor’s degree in microbiology, Biology, Life Sciences, or a related field.</li><li>Minimum of 3-5 years of microbiology laboratory experience in a cGMP pharmaceutical or biotechnology manufacturing environment.</li><li>Experience with isolator-based sterile manufacturing processes and aseptic support activities is strongly preferred.</li><li>Working knowledge of cGMPs, FDA and EU Annex 1 requirements, and microbiological standards (USP &lt;61&gt;, &lt;62&gt;, &lt;71&gt;, &lt;85&gt;, &lt;1116&gt;).</li><li>Experience supporting laboratory equipment startup, qualification, and routine maintenance preferred.</li><li>Prior experience with high potent APIs and/or controlled substances is desirable.</li></ul> Skills/Competencies: <ul><li>Advanced technical skills in environmental monitoring, microbial testing, and aseptic processing support.</li><li>Strong documentation and data integrity skills with a meticulous attention to detail.</li><li>Demonstrated ability to troubleshoot microbiological and laboratory equipment issues.</li><li>Effective time management and prioritization skills in a fast-paced environment.</li><li>Strong communication skills with the ability to train and mentor junior staff.</li><li>Proactive, collaborative, and compliance-oriented mindset.</li><li>Comfortable working in cleanroom environments and adhering to gowning and contamination control protocols.</li></ul>

Responsibilities: <ul><li>Perform routine environmental monitoring (viable and non-viable) in classified cleanroom areas (Grade A/B/C/D), including surface and personnel monitoring. Manufacturing is performed inside isolators with surrounding grade C environment.</li><li>Collect and test samples from water systems (e.g., purified water, WFI), compressed gases, and other utilities per GMP and site procedures.</li><li>Support aseptic process simulations (media fills), including preparation, execution, and recovery/interpretation of microbiological data.</li><li>Perform microbiological tests such as bioburden, endotoxin (LAL), and sterility testing for raw materials, in-process samples, and finished products.</li><li>Prepare microbiological media, perform growth promotion testing, and maintain inventory of reagents and supplies.</li><li>Maintain laboratory notebooks, logs, and electronic systems in a compliant and organized manner, ensuring adherence to data integrity standards.</li><li>Support qualification and validation activities including cleanroom and utility qualifications, method validations, and EM qualification mapping.</li><li>Assist in investigations related to microbial excursions or deviations and contribute to the development and implementation of CAPAs.</li><li>Support microbiology lab startup activities including equipment qualification, SOP development, and execution of technical transfer protocols.</li><li>Follow all safety, quality, and regulatory policies, and maintain compliance with cGMP, USP, EU Annex 1, and other applicable guidelines.</li></ul> Requirements: Qualifications/Experience: <ul><li>Associate’s or bachelor’s degree in microbiology, Biology, Life Sciences, or a related field.</li><li>1–3 years of microbiology laboratory experience in a GMP-regulated pharmaceutical or biotechnology manufacturing environment.</li><li>Experience working in sterile environments or supporting aseptic processes preferred.</li><li>Familiarity with environmental monitoring equipment (e.g., particle counters, air samplers), microbiological techniques, and lab instrumentation.</li><li>Knowledge of cGMPs, data integrity principles, and microbiological standards (USP &lt;61&gt;, &lt;62&gt;, &lt;71&gt;, &lt;85&gt;, &lt;1116&gt;).</li></ul> Skills/Competencies: <ul><li>Strong attention to detail and commitment to data accuracy and integrity.</li><li>Ability to work independently while collaborating effectively within a team</li><li>Good time management and organizational skills to support multiple tasks and priorities.</li><li>Proficient in the use of Microsoft Office and basic laboratory software systems.</li><li>Willingness to work flexible shifts or weekends to support aseptic operations and testing schedules, as needed.</li><li>A proactive and patient-focused mindset with a strong sense of ownership and compliance.</li></ul>

Role Description: <ul><li>The driving force behind the scanning platform at Client Dive into the forefront of innovation with our Gateway Security team, where we scan massive volumes of email traffic for our customers! Our pioneering Email Platform pushes on the boundaries of what’s possible, leveraging the latest technologies and tooling in AWS. Why Join Our Team? “The Gateway Security team, within the Threat Protection group, is responsible for developing the cutting edge scanning technology at the heart of Client protection stack, scanning over 2 billion emails, files, and URLs daily.</li><li>If you’re interested in solving customer challenges at immense scale, then this is the role for you!”</li></ul> Responsibilities: <ul><li>Initial point of contact for all Client in the Bengaluru office.</li><li>Be part of the global Client facilities team and assist the teams in other regions as required.</li><li>Coordinate first aid and fire safety as per building and statutory requirements.</li><li>Meet and greet clients and visitors, ensure Client visitor processes are followed.</li><li>Ensure effective and professional telephone communications by answering any incoming calls, taking messages and/or forwarding to the individual.</li><li>Sort daily post/deliveries/couriers, manage invoicing from landlord and suppliers.</li><li>Arrange catering for meetings and events as required.</li><li>Ensure daily checks of offices and kitchen areas, purchase office consumables as required, including beverages and food items and refreshment facilities.</li><li>Ensure the office is consistently kept in the best state including periodic checks of cleaning and maintenance with landlord and appointed contractors.</li><li>Liaise with building management, submitting maintenance request’s and raising permits.</li><li>Work with Regional IT and liaise with regional team and suppliers, including issuance of staff access passes, assist with supply and return of IT equipment and access for maintenance contractors.</li><li>Help out with planning of company events.</li><li>Within this position, the successful candidate will also be tagging assets, taking count of returned items - fixed asset management duties are listed in the job spec.</li><li>Including: new assets being purchased and a log of asset tags will need to be maintained.&nbsp;</li></ul> Requirements: <ul><li>2 – 4 years of administrative experience.&nbsp;</li><li>Proficiency with Microsoft Office, Word, Excel, and PowerPoint&nbsp;</li><li>Outstanding organizational skills, accuracy and attention to detail and the ability to multitask.</li><li>Written and verbal skills with strong grammatical, proofreading, typing and note taking skills.</li><li>Ability to work independently, flexibly and use discretion.</li><li>Excellent interpersonal skills, including a pleasant positive demeanor and a proactive approach.</li><li>A solid understanding of the goals and objectives of the business and their own personal goals.</li><li>Recognize that customer satisfaction is a principle measure of our business and our values.</li><li>Instinctively find practical solutions to complex problems.</li><li>Expect to encounter change and take ownership of your job.&nbsp;</li><li>Find new ways to win and share those victories with the team.&nbsp;</li></ul>

Responsibilities: <ul><li>Be part of a diverse and collaborative team consisting of engineers, a product manager and a designer.</li><li>Provide technical direction to the team, detecting technical improvement opportunities and taking action to design and implement them.</li><li>Mentor or coach other engineers to support their growth and bring them along</li><li>Design and develop features, APIs, and fixes to handle our current and future scale.</li><li>Help our customers have a great experience products.</li><li>Be a strong independent contributor.</li><li>Participate in and help improve the team’s agile process.</li><li>Engage with the support team as the last level of escalation for tickets.</li></ul> Requirements: <ul><li>Must have 7+ years of expertise in software development.</li><li>Must have 7+ years of experience with Node.JS/Javascript/Typescript ecosystem</li><li>5+ years of experience in Postgres and Redis.</li><li>Excellent communication and collaboration skills&nbsp;&nbsp;</li><li>Expertise in designing, building and maintaining public or internal APIs with focus on security and performance.</li><li>Solid understanding of the Node.JS/Javascript/Typescript ecosystem</li><li>A bias for well tested code and relevant unit/integration/end to end/performance testing experience</li><li>The drive for designing and building highly reliable, scalable, and secure systems</li><li>A mindset for sharing knowledge and supporting the growth of others around you</li><li>Strong context switching capabilities to be able to contribute to several projects at once, within and beyond the team subdomain</li><li>An owner mentality- you hold yourself accountable and have a relentless commitment to loving your customers</li></ul>

Responsibilities: <ul><li>Support bulk cable team by tracking quality, compiling reports, assist with DOEs and product qualification</li><li>Organize and facilitate Design Review (DR) and Design Failure Modes &amp; Effects Analysis (DFMEA) reviews.</li><li>Implement quality planning and controls for prototype and/or sample builds.</li><li>Complete measurement system analysis for inspection systems and gages to be utilized for the project.</li><li>Review and analyze samples, quality issues and improvement actions during prototype making and CTAR/Qualification.</li><li>Coordinate sample preparation and certification for product verification and qualification testing.</li><li>Conduct and analyze process capability studies in support of Final Tool Approval (FTAR) for all tools and production lines associated with the project using the Comprehensive Tool Approval Report (CTAR).</li><li>Collaborate with MPDE, monitor process capability/data and oversee ongoing corrective actions as required.</li><li>Collaborate with corporate UL team / UL engineer/PJE/PQE for new certification. -Collaborate with PDE, analyze physical/SI data and make qualification report.</li><li>Collaborate with PDE, CA PDE/SI/MPDE, support SQE on outsourced cable quality control and improvement from bulk cable engineering side.</li><li>Preparation for prototype/sample making: -Organize and facilitate Design Review (DR) and Design Failure Modes &amp; Effects Analysis (DFMEA) reviews.</li><li>Complete measurement system analysis for inspection systems and gages to be utilized for the project.</li><li>Data Analysis:Monitor process physical/SI data.</li><li>Review and analyze samples, quality issues and improvement actions during prototype making and CTAR/Qualification.</li><li>Review 108 and finish 501 documents per customer requirement and industrial standards.</li><li>Coordinator during prototype/sample making: -Monitor process capability and oversee ongoing corrective actions as required.</li><li>Support MPDE on FACA.</li><li>Support PDE on design improvement.</li><li>Coordinator during outsourced cable qualification process:Review outsourced cable Physical data, SI data, Reliability data, stability data, give comments from bulk cable engineering side on supplier quality and product quality.</li></ul> Requirements:﻿ <ul><li>Bachelors or Masters Degree in science or technology.</li><li>10 years min. working experience in bulk cable design or manufacturing.</li><li>3 years team management experience.</li><li>Familiar with bulk cable knowledge, bulk cable manufacturing knowledge and machines knowledge.</li><li>Can work under the pressure.</li><li>Drive for results, good problem solving skills</li><li>Good communication skill, integrity, accountability and passion, Integrity, ccountability, team work</li><li>Good communication, interpersonal and management skills</li></ul>

Role Description: <ul><li>We are seeking a talented Mechanical Engineer to join our team in the food manufacturing industry.</li><li>The successful candidate will be responsible for designing, developing, and maintaining mechanical systems and equipment to ensure efficient and reliable production processes.</li></ul> Responsibilities: <ul><li>Conduct feasibility studies and cost analyses for new projects and equipment upgrades.</li><li>Oversee the installation, commissioning, and testing of new mechanical equipment and systems.</li><li>Troubleshoot and resolve mechanical issues to minimize downtime and ensure continuous operation.</li><li>Develop and implement preventive maintenance programs to extend the lifespan of equipment and reduce the risk of breakdowns.</li><li>Collaborate with cross-functional teams, including production, quality control, and safety, to ensure reliable operations.</li><li>Maintain accurate records of engineering activities, including design specifications, maintenance logs, and equipment status.</li><li>Provide technical support and training to maintenance and production staff.</li><li>Evaluate production line postures to develop strategies aimed at minimizing unplanned downtime, enhancing Mean Time Between Failures (MTBF), and reducing Mean Time To Repair (MTTR).</li><li>Led Natural Resources Conservation (NRC) initiatives to enhance sustainability within the plant.</li><li>Direct the implementation of Working Standards within the team’s capabilities</li></ul> Requirements: <ul><li>Engineering degree.</li><li>Minimum 1 year to maximum 4 years of work experience required.</li><li>Preferred Industry--FMCG, Manufacturing</li><li>Team Management experience is preferred but not mandatory to have.</li></ul>

Skills

Industry

Location

Jobtitle

106 security testing Jobs found

Environmental Health and Safety (EHS) Manager

Senior Electrical Engineer

C# Developer (SSE)

QC Chemist

Senior Microbiology Technician

Microbiology Technician

Front of House Coordinator

Staff Software Engineer(Enterprise)

Staff Quality & Reliability Engineer

Mechanical Engineer

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

106 security testing Jobs found

Environmental Health and Safety (EHS) Manager

Senior Electrical Engineer

C# Developer (SSE)

QC Chemist

Senior Microbiology Technician

Microbiology Technician

Front of House Coordinator

Staff Software Engineer(Enterprise)

Staff Quality & Reliability Engineer

Mechanical Engineer

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.