Senior Microbiology Technician

Senior Officer/Team Member (Manager) - HOSC, Channel Operations Centre

Digital Factory Engineer

Staff Software Engineer(Enterprise)

Staff Software Engineer (Auth0)

Talent Acquisition Consultant – Leadership Hiring

Staff Quality & Reliability Engineer

Accounting Executive (Southeast Asia Accounting)

Country Head

Supervisor – Quality & Reliability Engineering

Responsibilities: <ul><li>Perform and oversee complex microbiological activities, including environmental monitoring (viable and non-viable), utility sampling (e.g., water, compressed gases), and aseptic process support in areas utilizing isolator technology.</li><li>Conduct and review microbiological testing for bioburden, endotoxin (LAL), sterility, and microbial identification on raw materials, in-process samples, and final products.</li><li>Support and lead aspects of aseptic process simulations (media fills) including planning, execution, incubation, and interpretation of results within isolator systems.</li><li>Assist in the startup and qualification of the microbiology laboratory including equipment qualification, SOP development, method verification/validation, and environmental monitoring qualification.</li><li>Contribute to investigations, non-conformances, and microbiological excursions by providing subject matter expertise and supporting root cause analysis and CAPA implementation.</li><li>Ensure accurate and timely documentation of laboratory data in compliance with data integrity principles and cGMP guidelines.</li><li>Mentor and provide technical guidance to junior microbiology staff, fostering a culture of scientific excellence, compliance, and continuous learning.</li><li>Maintain laboratory readiness for internal and external audits by following and enforcing good laboratory practices and cGMP expectations.</li><li>Participate in ongoing improvements to laboratory procedures, contamination control strategies, and sterility assurance programs.</li><li>Interface cross-functionally with Quality Assurance, Manufacturing, Validation, and Engineering to support cleanroom and equipment qualifications, isolator decontamination cycles, and site expansion activities.</li></ul> Requirements: Qualifications/Experience: <ul><li>Bachelor’s degree in microbiology, Biology, Life Sciences, or a related field.</li><li>Minimum of 3-5 years of microbiology laboratory experience in a cGMP pharmaceutical or biotechnology manufacturing environment.</li><li>Experience with isolator-based sterile manufacturing processes and aseptic support activities is strongly preferred.</li><li>Working knowledge of cGMPs, FDA and EU Annex 1 requirements, and microbiological standards (USP &lt;61&gt;, &lt;62&gt;, &lt;71&gt;, &lt;85&gt;, &lt;1116&gt;).</li><li>Experience supporting laboratory equipment startup, qualification, and routine maintenance preferred.</li><li>Prior experience with high potent APIs and/or controlled substances is desirable.</li></ul> Skills/Competencies: <ul><li>Advanced technical skills in environmental monitoring, microbial testing, and aseptic processing support.</li><li>Strong documentation and data integrity skills with a meticulous attention to detail.</li><li>Demonstrated ability to troubleshoot microbiological and laboratory equipment issues.</li><li>Effective time management and prioritization skills in a fast-paced environment.</li><li>Strong communication skills with the ability to train and mentor junior staff.</li><li>Proactive, collaborative, and compliance-oriented mindset.</li><li>Comfortable working in cleanroom environments and adhering to gowning and contamination control protocols.</li></ul>

Responsibilities:&nbsp; <ul><li>Review and approve customer withdrawal and deposit claims submitted through touchpoints and various channels&nbsp;</li><li>Access application systems, both web-based and host screens for transaction processing.&nbsp;</li><li>Exercise vigilance when performing transactions and report any unusual or suspicious transactions immediately to supervisor&nbsp;</li><li>Ensure all incoming instructions are processed within defined SLA and accurately.&nbsp;</li><li>Perform end-of-day reconciliation for all transactions processed by team.&nbsp;</li><li>Handle communications to and from internal departments.&nbsp;</li></ul> Requirements:&nbsp; <ul><li>Bachelor’s degree&nbsp;</li><li>Minimum 2 to 5 years of experience in financial institutions operations preferred.&nbsp;&nbsp;</li><li>Proficient computer skills especially MS Office applications&nbsp;</li><li>Able to communicate effectively both verbal and written&nbsp;</li></ul>

Responsibilities: <ul><li>At our client, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world.&nbsp;</li><li>Drives the implementation of programs and projects to improve products and processes and develops deployment plans.&nbsp;</li><li>Digital Factory transformation project followed APAC and Internal plant.direction.&nbsp;</li><li>Daily trouble shooting in production, provide short term &amp; long term solution to team.&nbsp;</li><li>Suggest &amp; drive improvements digital solution.&nbsp;</li><li>Support project assignment.&nbsp;</li></ul> Requirements:&nbsp; <ul><li>Plant digitals, cooperate with APAC and our client service team for transformation project.&nbsp;</li><li>Digital factory transformation project implementation, Identify and resolve issue during implementation.&nbsp;</li><li>Training on new digital tools and technologies. Develop training material and provide training to ensure fully utilization.&nbsp;</li><li>Maintain and troubleshooting for exiting digital tools, AGV, Material Calling System, Hydra, dPIM etc.&nbsp;</li><li>Continuous Improvement, identify new opportunities and innovation in operation processes.&nbsp;</li><li>Data analysis and monitoring, Operations Scorecard, Operation Dashboard (SCCOP, SHE, OEE) and advise weakness areas for improvement.&nbsp;</li><li>Handle on CER related /CI working with operations and cross functional team.&nbsp;</li><li>Support operations project assignment.&nbsp;</li></ul> What your background should look like&nbsp; <ul><li>Bachelor’s Degree in Information Technology, Computer science or related field.&nbsp;</li><li>Strong knowledge and experiences in Digital transformation projects.&nbsp;</li><li>Familiarity with digital tools and technologies used in manufacturing.&nbsp;</li><li>Minimum 3 to 6 years working experience in manufacturing sector.&nbsp;</li><li>Knowledge of in cloud technology, virtualization, mobile application, IOT, SQL Server.&nbsp;</li><li>Reporting Services, Power BI, Tableau.&nbsp;</li><li>Good knowledge in Data Storage, Cloud, Microsoft Power Apps.&nbsp;</li><li>Good knowledge in Dashboard creation, Graphic and User Interface (UI) design.&nbsp;</li><li>New enhancement for new functionality in SAP and Hydra.&nbsp;</li><li>OEE, Utilization analysis skill.&nbsp;</li><li>Knowledge and experiences in Enterprise Resource Planning software – SAP/BOM/Routing will be advantage.&nbsp;</li><li>Logical thinking with Project Management Skill.&nbsp;</li><li>Fluent in English and good communication.&nbsp;</li><li>Interpersonal skills.&nbsp;</li></ul>

Responsibilities: <ul><li>Be part of a diverse and collaborative team consisting of engineers, a product manager and a designer.</li><li>Provide technical direction to the team, detecting technical improvement opportunities and taking action to design and implement them.</li><li>Mentor or coach other engineers to support their growth and bring them along</li><li>Design and develop features, APIs, and fixes to handle our current and future scale.</li><li>Help our customers have a great experience products.</li><li>Be a strong independent contributor.</li><li>Participate in and help improve the team’s agile process.</li><li>Engage with the support team as the last level of escalation for tickets.</li></ul> Requirements: <ul><li>Must have 7+ years of expertise in software development.</li><li>Must have 7+ years of experience with Node.JS/Javascript/Typescript ecosystem</li><li>5+ years of experience in Postgres and Redis.</li><li>Excellent communication and collaboration skills&nbsp;&nbsp;</li><li>Expertise in designing, building and maintaining public or internal APIs with focus on security and performance.</li><li>Solid understanding of the Node.JS/Javascript/Typescript ecosystem</li><li>A bias for well tested code and relevant unit/integration/end to end/performance testing experience</li><li>The drive for designing and building highly reliable, scalable, and secure systems</li><li>A mindset for sharing knowledge and supporting the growth of others around you</li><li>Strong context switching capabilities to be able to contribute to several projects at once, within and beyond the team subdomain</li><li>An owner mentality- you hold yourself accountable and have a relentless commitment to loving your customers</li></ul>

Responsibilities: <ul><li>Build secure, performant, cross-platform applications for both customers and internal company teams.</li><li>Collaborate across teams to solve technical and non-technical challenges.</li><li>Work closely with Product and Design to determine and optimize user experience and information architecture.</li><li>Build new features and maintain existing features by contributing across the full technical stack.</li><li>Debug and resolve production issues and implement fixes for them.</li><li>Be a part of the teams on-call rotations.</li><li>Evaluate new technologies and techniques to improve overall practices.</li></ul> Requirements: <ul><li>Must have 7+ years of expertise in full-stack development.</li><li>Have a passion for learning.</li><li>Have excellent communication and collaboration skills.</li><li>Are customer-obsessed and love helping people.</li><li>Have a good understanding of Javascript and TypeScript.</li></ul>

Responsibilities: <ul><li>Non-IT Recruitment role</li><li>Focus on GM level and above hiring</li><li>Develop and execute a comprehensive talent acquisition strategy aligned with business goals and growth plans</li><li>Lead and manage the end-to-end recruitment function, ensuring consistent, high-quality hiring across all business units and geographies</li><li>Ensure exceptional candidate and hiring manager experiences, fostering engagement and strong stakeholder relationships</li><li>Calibration discussions</li><li>Present regular hiring insights and progress reports to senior leadership, highlighting performance, challenges, and market intelligence.</li></ul> Requirements: <ul><li>Blend of consulting and corporate recruitment experience preferred</li><li>Experience with multiple clients or business units (e.g., from firms like Korn Ferry, etc.)</li><li>Strong skills in Excel, PowerPoint, and dashboard creation</li><li>Familiarity with SuccessFactors (ATS) is an advantage</li><li>Clear and concise communication style</li></ul>

Responsibilities: <ul><li>Support bulk cable team by tracking quality, compiling reports, assist with DOEs and product qualification</li><li>Organize and facilitate Design Review (DR) and Design Failure Modes &amp; Effects Analysis (DFMEA) reviews.</li><li>Implement quality planning and controls for prototype and/or sample builds.</li><li>Complete measurement system analysis for inspection systems and gages to be utilized for the project.</li><li>Review and analyze samples, quality issues and improvement actions during prototype making and CTAR/Qualification.</li><li>Coordinate sample preparation and certification for product verification and qualification testing.</li><li>Conduct and analyze process capability studies in support of Final Tool Approval (FTAR) for all tools and production lines associated with the project using the Comprehensive Tool Approval Report (CTAR).</li><li>Collaborate with MPDE, monitor process capability/data and oversee ongoing corrective actions as required.</li><li>Collaborate with corporate UL team / UL engineer/PJE/PQE for new certification. -Collaborate with PDE, analyze physical/SI data and make qualification report.</li><li>Collaborate with PDE, CA PDE/SI/MPDE, support SQE on outsourced cable quality control and improvement from bulk cable engineering side.</li><li>Preparation for prototype/sample making: -Organize and facilitate Design Review (DR) and Design Failure Modes &amp; Effects Analysis (DFMEA) reviews.</li><li>Complete measurement system analysis for inspection systems and gages to be utilized for the project.</li><li>Data Analysis:Monitor process physical/SI data.</li><li>Review and analyze samples, quality issues and improvement actions during prototype making and CTAR/Qualification.</li><li>Review 108 and finish 501 documents per customer requirement and industrial standards.</li><li>Coordinator during prototype/sample making: -Monitor process capability and oversee ongoing corrective actions as required.</li><li>Support MPDE on FACA.</li><li>Support PDE on design improvement.</li><li>Coordinator during outsourced cable qualification process:Review outsourced cable Physical data, SI data, Reliability data, stability data, give comments from bulk cable engineering side on supplier quality and product quality.</li></ul> Requirements:﻿ <ul><li>Bachelors or Masters Degree in science or technology.</li><li>10 years min. working experience in bulk cable design or manufacturing.</li><li>3 years team management experience.</li><li>Familiar with bulk cable knowledge, bulk cable manufacturing knowledge and machines knowledge.</li><li>Can work under the pressure.</li><li>Drive for results, good problem solving skills</li><li>Good communication skill, integrity, accountability and passion, Integrity, ccountability, team work</li><li>Good communication, interpersonal and management skills</li></ul>

Responsibilities: <ul><li>Responsible for Accounts Payable of SEA &amp; AU region</li><li>Support daily finance and administrative work under guidance of Manager/Senior Accountant</li><li>Follow the instruction from Manager/Senior Accountant to support daily finance &amp; clerical work</li><li>Assist in annual statutory audit</li><li>Perform ad hoc assignments when required</li></ul> Requirements: <ul><li>Relevant qualification with at least 2-3 years working experience in similar capacity</li><li>Candidate with less experience will be considered as Accounting Assistant</li><li>Knowledge in SAP will be highly advantageous</li><li>Proactive team player with good communication skills</li><li>Detail-minded and able to meet tight deadlines</li><li>Good PC skills in Microsoft Excel and Word&nbsp;</li></ul>

Role Description: <ul><li>The Country Head is the most senior commercial executive and face of our petroleum business in Country.</li><li>This role serves as the primary growth driver and central leadership authority for business operations within the market.</li><li>This role is laser-focused on aggressively expanding market share, revenue, and profitability while providing inspirational leadership and strategic direction to all country-based teams.</li><li>The Country Head has direct line management responsibility for the sales organization and exercises influential leadership over all other functions to ensure cohesive execution of growth strategies and achievement of growth ambitions as articulated in Destination 2030 Strategy.</li></ul> Responsibilities: Growth Leadership and Market Expansion <ul><li>Develop and execute robust growth strategies to grow the Company’s market share and drive revenue growth.</li><li>Lead market penetration initiatives, identifying and capitalizing on new business opportunities, customer segments, and geographic expansion possibilities.</li><li>Set the Country’s growth targets for the team, drive relentless execution and high team performance in country.</li><li>Conduct competitive intelligence and market analysis to identify growth opportunities and competitive advantages.</li><li>Champion innovative go-to-market strategies, pricing optimization, and value proposition development.</li><li>Drive customer acquisition and retention strategies, focusing on high-value accounts and strategic partnerships.</li><li>Lead major deal negotiations and strategic customer relationships that positively impact business growth.</li><li>Represent the company at industry events, government forums, and key customer and regulator engagements to enhance market position.</li><li>Develop comprehensive country business plans that align with Energy BU strategies.</li><li>Identify and evaluate strategic partnerships, joint ventures, and acquisition opportunities.</li><li>Drive business development initiatives including new market entry strategies.</li><li>Conduct regular business reviews and adjust strategies based on market dynamics and performance.</li><li>Manage key stakeholder relationships including government officials, regulatory bodies, and industry associations.</li></ul> Sales Organization Leadership <ul><li>Directly manage and inspire the sales team to achieve exceptional performance and exceed sales targets.</li><li>Recruit, develop, and retain top-tier sales talent while building a high-performance sales culture.</li><li>Establish sales strategies, territory management, and account planning frameworks.</li><li>Implement sales processes, performance metrics, and incentive structures that drive results.</li><li>Provide hands-on coaching and mentoring to sales team members to maximize their potential.</li><li>Lead sales forecasting, pipeline management, and performance review processes.</li><li>Drive sales team accountability through regular performance monitoring and corrective action when needed.</li></ul> Performance Management and Results Delivery <ul><li>Take full accountability for country P&amp;L performance at gross margin level.</li><li>Partner with functional leaders to jointly set KPIS for all functions in country.</li><li>Ensure closure of receivables in a timely manner.</li><li>Ensure compliance with all regulatory requirements and company policies.</li><li>Implement risk management strategies and contingency planning for business continuity.</li><li>Report regularly to Petroleum leadership team on performance, challenges, and growth opportunities.</li></ul> Stakeholder Management &amp; External Relations <ul><li>Build and maintain strategic relationships with key government officials, regulatory authorities, and industry leaders.</li><li>Represent the companys interests in industry associations, chambers of commerce, and policy forums.</li><li>Ensure positive brand reputation and stakeholder confidence in the market.</li></ul> Requirements: <ul><li>Bachelors degree in Engineering, or business related field.</li><li>Masters degree (MBA) is a plus.</li><li>Industry-specific certifications or executive education programs advantageous.</li><li>Minimum 10-12 years of progressive leadership experience in petroleum, oil &amp; gas, or related energy industries.</li><li>At least 3 years’ experience in a leadership role.</li><li>Proven track record of driving significant business growth and market share expansion.</li><li>Experience managing sales organizations and achieving ambitious revenue targets.</li><li>Experience working in emerging markets or similar economic environments.</li></ul>

Responsibilities: <ul><li>Collaborate with engineering, production, and planning teams to continuously improve product quality across the manufacturing process.</li><li>Supervise and manage the incoming and final inspection areas.</li><li>Drive improvement initiatives within incoming, in-process, and final inspection operations.</li><li>Prioritize inspection activities to ensure timely completion of production materials, engineering validations, and gage R&amp;Rs.</li><li>Identify and execute containment actions for nonconforming materials found during in-process or final inspections.</li><li>Work with cross-functional teams to investigate nonconforming products using root cause analysis tools (Ishikawa, 5-Whys, Is-Is Not, etc.) and implement corrective and preventive actions.</li><li>Communicate with customers regarding product-related complaints and facilitate evaluation and return of materials as needed.</li><li>Investigate product quality issues related to customer returns (e.g., nonconforming material reports, corrective actions).</li><li>Create and update operations procedures and documentation used within production.</li><li>Ensure compliance with quality assurance policies and procedures to meet or exceed customer expectations.</li><li>Implement continuous improvement initiatives to reduce defects, improve efficiency, and enhance product quality.</li><li>Conduct manufacturing and quality system audits to ensure compliance with ISO 13485.</li><li>Support operational projects such as Kaizen, data analysis, and problem-solving initiatives.</li></ul> Requirements: Qualifications/Background: <ul><li>Bachelor’s degree in Quality, Science, or Engineering preferred (High School Diploma with equivalent experience will be considered).</li><li>Prior experience as a Quality Engineer in a manufacturing environment.</li><li>5+ years of industry experience in a medical device manufacturing or pharmaceutical environment.</li><li>Supervisory or management experience preferred.</li><li>Working knowledge of FDA, ISO, and MDD quality systems applicable to medical device companies.</li><li>Excellent written and verbal communication skills.</li></ul>

Skills

Industry

Location

Jobtitle

172 senior engineer qaautomation Jobs found

Senior Microbiology Technician

Senior Officer/Team Member (Manager) - HOSC, Channel Operations Centre

Digital Factory Engineer

Staff Software Engineer(Enterprise)

Staff Software Engineer (Auth0)

Talent Acquisition Consultant – Leadership Hiring

Staff Quality & Reliability Engineer

Accounting Executive (Southeast Asia Accounting)

Country Head

Supervisor – Quality & Reliability Engineering

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

172 senior engineer qaautomation Jobs found

Senior Microbiology Technician

Senior Officer/Team Member (Manager) - HOSC, Channel Operations Centre

Digital Factory Engineer

Staff Software Engineer(Enterprise)

Staff Software Engineer (Auth0)

Talent Acquisition Consultant – Leadership Hiring

Staff Quality & Reliability Engineer

Accounting Executive (Southeast Asia Accounting)

Country Head

Supervisor – Quality & Reliability Engineering

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.