Process Simulation & Optimization Engineer ( GM )

ASC-Process Simulation & Optimization Engineer

PE Specialist Profile/Oil Reservoir Management

Process Engineering

Chemical Engineering (HDGP)

Thermal Systems Engineer

Process Engineering -SAGO

ASC Energy Engineer - Energy Optimization Engineer

Well Testing Specialist – RD & SD

Responsibilities: As the successful candidate you will be required to perform the following: <ul><li>Streamline Process Simulation &amp; Optimization objectives with corporate objectives and develop program best practices, and monitor KPIs to improve Process Simulation and modeling performance.&nbsp;</li><li>Lead and develop Process Simulation models for refineries and NGL fractionations using dynamic or steady state simulation software applications.</li><li>Perform process simulations and modeling using specialized software tools to analyze refinery processes and optimize their performance.</li><li>Develop and maintain thermodynamic models and mathematical equations that accurately represent the behavior of various refinery processes.</li><li>Verify the accuracy of the simulation models by comparing the results with actual plant data and conducting sensitivity analyses.</li><li>Identify areas for process improvements and propose modifications or optimizations to increase efficiency, reduce costs, or meet regulatory requirements.</li><li>Conduct performance improvement feasibility studies to increase yields, and operational efficiency of the company.</li><li>Analyze chronicle problems and debottleneck complex models to improve process operations and economic benefits.</li><li>Conduct safety assessments to evaluate the impact of potential process changes or plant modifications.</li><li>Lead technical sessions such as the design review, model review, and commissioning.</li><li>Provide subject matter expertise to operating facilities Operations, Maintenance, and Engineering teams by consulting, providing awareness sessions, and participating and leading technical exchanges and conferences.</li><li>Conduct benchmarks, business case studies, and pilot and evaluate process simulation technologies.</li><li>Review standards and General Instructions on behalf of the GME departments and act as leading SME.</li><li>Prepare detailed reports and presentations to communicate simulation results, findings, and recommendations to stakeholders.</li><li>Collaborate with other engineers and researchers and vendors to contribute to the development of new simulation software tools, methodologies, and techniques.</li></ul> Requirements: <ul><li>You must have a Bachelor degree in Chemical Engineering.</li><li>You should have a minimum of 10 years of experience with Process Simulation and Modeling technologies.</li><li>You should be able to demonstrate expertise in process engineering end flowsheet-based processes simulation.</li><li>You should possess a comprehensive understanding of refinery facilities, feedstock/product movements, margins, giveaways, process yields, and mass and energy balances.</li><li>Familiarity with international standards and specifications for advanced process control process modeling is also essential.</li><li>Exceptional analytical and troubleshooting skills in the field of advanced process solutions is a must.</li><li>Strong leadership skills to effectively manage technical discussions and guide technical teams is also required.</li></ul>

Responsibilities: As the successful candidate you will be required to perform the following: <ul><li>Streamline Process Simulation &amp; Optimization objectives with corporate objectives and develop program best practices, and monitor KPIs to improve Process Simulation and modeling performance.&nbsp;</li><li>Lead and develop Process Simulation models for refineries and NGL fractionations using dynamic or steady state simulation software applications.</li><li>Perform process simulations and modeling using specialized software tools to analyze refinery processes and optimize their performance.</li><li>Develop and maintain thermodynamic models and mathematical equations that accurately represent the behavior of various refinery processes.</li><li>Verify the accuracy of the simulation models by comparing the results with actual plant data and conducting sensitivity analyses.</li><li>Identify areas for process improvements and propose modifications or optimizations to increase efficiency, reduce costs, or meet regulatory requirement</li><li>Conduct performance improvement feasibility studies to increase yields, and operational efficiency of the company.</li><li>Analyze chronicle problems and debottleneck complex models to improve process operations and economic benefits.</li><li>Conduct safety assessments to evaluate the impact of potential process changes or plant modifications.</li><li>Lead technical sessions such as the design review, model review, and commissioning.</li><li>Provide subject matter expertise to operating facilities Operations, Maintenance, and Engineering teams by consulting, providing awareness sessions, and participating and leading technical exchanges and conferences.</li><li>Conduct benchmarks, business case studies, and pilot and evaluate process simulation technologies.</li><li>Review standards and General Instructions on behalf of the GME departments and act as leading SME.</li><li>Collaborate with multidisciplinary teams to gather data and inputs required for the simulations and modeling activities.</li><li>Prepare detailed reports and presentations to communicate simulation results, findings, and recommendations to stakeholders.</li><li>Collaborate with other engineers and researchers and vendors to contribute to the development of new simulation software tools, methodologies, and techniques.</li><li>Stay updated with the latest industry standards, best practices, and technological advancements in process simulation and modeling.</li></ul> Requirements: <ul><li>To be considered for this role, you must possess a bachelors degree in Chemical Engineering.&nbsp;</li><li>Additionally, a minimum of 15 years of experience with Process Simulation and Modeling technologies is required (20+ years is preferred).</li></ul> Moreover, you should possess the following abilities: <ul><li>Demonstrated expertise in process engineering and flowsheet-based processes simulation.</li><li>Comprehensive understanding of refinery facilities, feedstock/product movements, margins, giveaways, process yields, and mass and energy balances.</li><li>Familiarity with international standards and specifications for advanced process control process modeling.</li><li>Exceptional analytical and troubleshooting skills in the field of advanced process solutions.</li><li>Strong leadership skills to effectively manage technical discussions and guide technical teams.&nbsp;</li></ul>

Responsibilities: <ul><li>You are expected to be able to do the following:</li><li>Provide guidance and oversight on best-in-class reservoir management tenets, practices and state-of-the art- technologies for all our client hydrocarbon assets.</li><li>Formulate reservoir development, data acquisition, strategic surveillance and monitoring master-plans to ensure optimal development and depletion strategies.</li><li>Utilize reservoir management standards and guidelines to enhance both NPV and hydrocarbon recovery.</li><li>Lead, design and participate in integrated field reviews and field development plans.</li><li>Preparing reservoir engineering input into drilling and work-over proposals and programs.</li><li>Recommend advanced completion techniques for horizontal and multi-lateral wells.</li><li>Lead and participate in reservoir engineering studies that include reservoir stimulation modeling of various IOR processes for improvement of ultimate recovery.</li><li>Participate in technical societies and technical groups.</li><li>Train and mentor young engineer</li></ul> Requirements: <ul><li>As a successful candidate, you should hold a Bachelor degree in Petroleum Engineering or related discipline.&nbsp;</li><li>Master’s degree or PhD is desirable, but not required.</li><li>A minimum of 10 years related experience including at least 7 years specializing in oil reservoir management.&nbsp;</li><li>A training history of appropriate specialized courses and seminars is expected. Technical publications are valued but in-depth practical experience is paramount.</li><li>You must have full professional proficiency in English required to interact and communicate clearly with specialists in geology, core and fluid analysis, petrophysics, simulation, drilling, completion, production and facilities.</li><li>You must have working knowledge of open-hole and cased-hole logs, geological modeling, simulation, completion and production procedures and technologies.</li><li>Technical knowledge and expertise are required in formation evaluation, geological modeling, simulation, reservoir appraisal and field development planning, completion, production/injection procedures-strategy-technologies, water flooding, reservoir surveillance, SCAL, PVT, geochemical analysis, and fluid’s compatibility.</li><li>Additionally, expertise in Artificial Intelligence, Machine Learning, and data analytics are desirable but not required.</li><li>You must have history of using modern reservoir management practices for oil reservoirs.&nbsp;</li></ul>

Responsibilities: <ul><li>Handle process activities such as studies and design modifications in the operating facilities</li><li>Develop simulation models for assigned operation facilities</li><li>Develop, review and/or validate plant mass balances</li><li>Check plant performance to ensure it is running up to its design</li><li>Look for opportunities to optimize operations and implement them accordingly.</li><li>Use the software simulation programs such as HYSYS and promax.</li><li>Provide technical direction/support to in-Kingdom and out-of-Kingdom design contractors</li><li>Formulate and implement long-term strategies to improve operations and reduce costs</li><li>Lead groups of engineers in the shutdown and start-up phase of existing plants.</li><li>Participate in standards reviews to assure inclusion of requirements that are of practical benefit to field operation and maintenance in regard to safety and efficiency of the plant.</li><li>Provide guidance on standards development through technical committee participation. Interprets standards and recommends changes to reduce costs associated with overly stringent requirements.</li><li>Lead unit performance and capacity tests and prepare testing procedures</li><li>Conduct risk assessment</li><li>Conduct process equipment performance test, for heat exchangers e.g. reboilers, fin-fan coolers, rotating equipment,</li><li>Lead performance test for static equipment e.g. column, separator etc.</li><li>Lead performance test for fired equipment and converters including catalyst performance.</li><li>Lead driers break-through test and issue test result report including desiccant replacement plan.</li><li>Lead propane refrigeration system performance test</li><li>Evaluate the catalyst recovery performance</li><li>Lead solution (DGA / TEG) filtration system performance test.&nbsp;</li><li>Evaluate DGA/TEG monthly losses</li><li>Issue report covering bottlenecks, deficiencies, and recommendations and follow-up on the implementation</li><li>Lead process and equipment optimization studies</li><li>Lead feasibility studies</li><li>Lead PHA and HAZOP studies</li><li>Initiate and coordinate ESAs</li><li>Develop implementation plan for critical recommendations</li><li>Ensure implementation plan is executed for the system under study and propagated to other applicable systems.</li><li>Lead Health, Safety and Environmental studies</li><li>Lead Energy Optimization / Conservation studies</li><li>Initiate process safety relief audit studies.</li><li>Lead Water conservation studies</li><li>perform management of change (MOC)</li><li>verify system operations and performance after implementing the recommendations</li></ul> Requirements: <ul><li>As a successful candidate you should have a BS in Chemical Engineering with (15) years of experience in relevant gas processing operation facilities in Oil/Gas Industry, knowledge and experience in software simulation programs such as HYSYS and promax and strong knowledge of engineering practices and economic principles, calculation methods, design details, and aware about the processing codes and standards.</li><li>You should have excellent experience and knowledge in design and modification, reviewing the standards and how to develop and evaluate studies</li></ul>

Responsibilities You will be required to perform the following: <ul><li>Handle process activities such as studies and design modifications in the operating facilities</li><li>Develop simulation models for assigned operation facilities</li><li>Develop, review and/or validate plant mass balances</li><li>Check plant performance to ensure it is running up to its design</li><li>Look for opportunities to optimize operations and implement them accordingly.</li><li>Use the software simulation programs such as HYSYS and promax.</li><li>Provide technical direction/support to in-Kingdom and out-of-Kingdom design contractors</li><li>Formulate and implement long-term strategies to improve operations and reduce costs</li><li>Lead groups of engineers in the shutdown and start-up phase of existing plants.</li><li>Participate in standards reviews to assure inclusion of requirements that are of practical benefit to field operation and maintenance in regard to safety and efficiency of the plant.</li><li>Provide guidance on standards development through technical committee participation. Interprets standards and recommends changes to reduce costs associated with overly stringent requirements.</li><li>Lead unit performance and capacity tests and prepare testing procedures</li><li>Conduct risk assessment</li><li>Conduct process equipment performance test, for heat exchangers e.g. reboilers, fin-fan coolers, rotating equipment,</li><li>Lead performance test for static equipment e.g. column, separator etc.</li><li>Lead performance test for fired equipment and converters including catalyst performance.</li><li>Lead driers break-through test and issue test result report including desiccant replacement plan.</li><li>Lead propane refrigeration system performance test</li><li>Evaluate the catalyst recovery performance</li><li>Lead solution (DGA / TEG) filtration system performance test. Evaluate DGA/TEG monthly losses</li><li>Issue report covering bottlenecks, deficiencies, and recommendations and follow-up on the implementation</li><li>Lead process and equipment optimization studies</li><li>Lead feasibility studies</li><li>Lead PHA and HAZOP studies</li><li>Initiate and coordinate ESAs</li><li>Develop implementation plan for critical recommendations</li><li>Ensure implementation plan is executed for the system under study and propagated to other applicable systems.</li><li>Lead Health, Safety and Environmental studies</li><li>Lead Energy Optimization / Conservation studies</li><li>Initiate process safety relief audit studies.</li><li>Lead Water conservation studies</li><li>perform management of change (MOC)</li><li>verify system operations and performance after implementing the recommendations</li></ul> Requirements&nbsp; <ul><li class="ql-align-justify">As a successful candidate you should have a BS in Chemical Engineering with (15) years of experience in relevant gas processing operation facilities in Oil/Gas Industry, knowledge and experience in software simulation programs such as HYSYS and promax and strong knowledge of engineering practices and economic principles, calculation methods, design details, and aware about the processing codes and standards.</li></ul>

Responsibilities: You will be required to perform the following: <ul><li>Handle process activities such as studies and design modifications in the operating facilities</li><li>Develop simulation models for assigned operation facilities.</li><li>Develop, review and/or validate plant mass balances.</li><li>Check plant performance to ensure it is running up to its design.</li><li>Look for opportunities to optimize operations and implement them accordingly.</li><li>Use the software simulation programs such as HYSYS and promax.</li><li>Provide technical direction/support to in-Kingdom and out-of-Kingdom design contractors</li><li>Formulate and implement long-term strategies to improve operations and reduce costs</li><li>Lead groups of engineers in the shutdown and start-up phase of existing plants.</li><li>Participate in standards reviews to assure inclusion of requirements that are of practical benefit to field operation and maintenance in regard to safety and efficiency of the plant.</li><li>Provide guidance on standards development through technical committee participation.</li><li>Interprets standards and recommends changes to reduce costs associated with overly stringent requirements.</li><li>Lead unit performance and capacity tests and prepare testing procedures.</li><li>Conduct risk assessment</li><li>Conduct process equipment performance test, for heat exchangers e.g. reboilers, fin-fan coolers, rotating equipment,</li><li>Lead performance test for static equipment e.g. column, separator etc.</li><li>Lead performance test for fired equipment and converters including catalyst performance.</li><li>Lead driers break-through test and issue test result report including desiccant replacement plan.</li><li>Lead propane refrigeration system performance test.</li><li>Evaluate the catalyst recovery performance.</li><li>Lead solution (DGA / TEG) filtration system performance test. Evaluate DGA/TEG monthly losses.</li><li>Issue report covering bottlenecks, deficiencies, and recommendations and follow-up on the implementation.</li><li>Lead process and equipment optimization studies.</li><li>Lead feasibility studies.</li><li>Lead PHA and HAZOP studies</li><li>Initiate and coordinate ESAs.</li><li>Develop implementation plan for critical recommendations.</li><li>Ensure implementation plan is executed for the system under study and propagated to other applicable systems.</li><li>Lead Health, Safety and Environmental studies.</li><li>Lead Energy Optimization / Conservation studies.</li><li>Initiate process safety relief audit studies.</li><li>Lead Water conservation studies.</li><li>perform management of change (MOC).</li><li>verify system operations and performance after implementing the recommendations.</li></ul> Requirements: <ul><li>As a successful candidate you should have a BS in Chemical Engineering with (15) years of experience in relevant gas processing operation facilities in Oil/Gas Industry, knowledge and experience in software simulation programs such as HYSYS and promax and strong knowledge of engineering practices and economic principles, calculation methods, design details, and aware about the processing codes and standards.</li><li>You should have excellent experience and knowledge in design and modification, reviewing the standards and how to develop and evaluate studies</li></ul>

Responsibilities: <ul><li>Design and Development of a wide range of Thermal Management Systems (TMS) (Conventional/Electric Powertrain Cooling Systems (P-CS), Battery Thermal Management Systems (BTMS), Hydrogen and Fuel Cells Powertrains, Environmental Control Systems (ECS) and air-conditioning (A/C) etc.) from the Conceptual Design to the Integration and Entry into Service phases.</li><li>Active participation in a broad spectrum of applications and Aircrafts’ Development such as Conventional, Hybrid and Electric Aircrafts, Experimental Prototypes and serial production for Fixed Wing Aircrafts and VTOLs.</li><li>Implementation and leveraging of advanced Thermal Simulation (0D – CFD) tools (using both Commercial Software and Internally developed codes and algorithms) to perform analyses to drive the design and the validation of TMS.</li><li>Supervise the development and integration of the 3D CAD models of the System and its components.</li><li>Collaborate with the Testing Teams (Ground and Flight Test) to plan and conduct Testing activities to validate the Design and verify the performance of different TMS.</li><li>Preparation of detailed Technical Documentation (Analysis and Simulation results, procedures, Test Plan/Reports, Project Deliverables, etc.)</li><li>Working closely with other Departments (Electrical, Mechanical, Airworthiness etc.) to integrate thermal solutions into the overall design of the aircraft. Address thermal challenges at various stages of projects’ development.</li><li>Assist in the Suppliers’ Selection and Management</li></ul>&nbsp;Requirements: <ul><li>MSc or PhD degree in Aerospace/Mechanical Engineering or a related field.</li><li>Minimum 3 years of work experience in the field of Thermal Management Systems such as:</li><li>Thermal or Electric Powertrain CS</li><li>Battery Thermal Management Systems (BTMS)</li><li>Environmental Control System and/or Air Conditioning</li><li>Hydrogen and Fuel Cells Powertrain</li><li>Strong Thermal Engineering Background (Thermodynamics, Heat Transfer, Fluid-Dynamic).</li><li>Proficiency with System Level (0-D/1-D) Modelling and Simulation tools (AMEsim, Simscape, Modelica etc.). Basic understanding of Aerodynamics and CFD knowledge is preferred.</li><li>Experience with Electronics Thermal Management Systems Design and Development is preferred (Heat Sinks, Heat Pipes etc.)</li><li>Experience with 3D CAD and engineering design tools (preferably SolidWorks)</li><li>Hands-on experience in Prototyping, Testing and Validation of Thermal Systems (ideally for aerospace settings).</li><li>Excellent problem solving, communication and collaboration skills, precise and patient character.</li><li>Proactive and able to work with a minimum of supervision.</li><li>Strong ability to think out of the box.</li><li>Hands-on attitude.</li><li>Understanding of programming languages (preferably Python).</li><li>Fluent English language skills.</li></ul>

Responsibilities: <ul><li>Handle process activities such as studies and design modifications in the operating facilities</li><li>Develop simulation models for assigned operation facilities</li><li>Develop, review and/or validate plant mass balances</li><li>Check plant performance to ensure it is running up to its design</li><li>Look for opportunities to optimize operations and implement them accordingly.</li><li>Use the software simulation programs such as HYSYS and promax.</li><li>Provide technical direction/support to in-Kingdom and out-of-Kingdom design contractors</li><li>Formulate and implement long-term strategies to improve operations and reduce costs</li><li>Lead groups of engineers in the shutdown and start-up phase of existing plants.</li><li>Participate in standards reviews to assure inclusion of requirements that are of practical benefit to field operation and maintenance in regard to safety and efficiency of the plant.</li><li>Provide guidance on standards development through technical committee participation. Interprets standards and recommends changes to reduce costs associated with overly stringent requirements.</li><li>Lead unit performance and capacity tests and prepare testing procedures</li><li>Conduct risk assessment</li><li>Conduct process equipment performance test, for heat exchangers e.g. reboilers, fin-fan coolers, rotating equipment,</li><li>Lead performance test for static equipment e.g. column, separator etc.</li><li>Lead performance test for fired equipment and converters including catalyst performance.</li><li>Lead driers break-through test and issue test result report including desiccant replacement plan.</li><li>Lead propane refrigeration system performance test</li><li>Evaluate the catalyst recovery performance</li><li>Lead solution (DGA / TEG) filtration system performance test. Evaluate DGA/TEG monthly losses</li><li>Issue report covering bottlenecks, deficiencies, and recommendations and follow-up on the implementation</li><li>Lead process and equipment optimization studies</li><li>Lead feasibility studies</li><li>Lead PHA and HAZOP studies</li><li>Initiate and coordinate ESAs</li><li>Develop implementation plan for critical recommendations</li><li>Ensure implementation plan is executed for the system under study and propagated to other applicable systems.</li><li>Lead Health, Safety and Environmental studies</li><li>Lead Energy Optimization / Conservation studies</li><li>Initiate process safety relief audit studies.</li><li>Lead Water conservation studies</li><li>perform management of change (MOC)</li><li>verify system operations and performance after implementing the recommendations</li></ul> Requirements: <ul><li>As a successful candidate you should have a BS in Chemical Engineering with (10) years of experience in relevant gas processing operation facilities in Oil/Gas Industry, knowledge and experience in software simulation programs such as HYSYS and promax and strong knowledge of engineering practices and economic principles, calculation methods, design details, and aware about the processing codes and standards.</li><li>You should have excellent experience and knowledge in design and modification, reviewing the standards and how to develop and evaluate studies</li></ul>

Responsibilities: You are expected to be able to perform the following: <ul><li>Conduct process improvement, modification and conceptual design.</li><li>Conduct energy optimization studies at existing and new oil and gas facilities</li><li>Audit and review existing facilities to identify improvement opportunities, potential problems, and remedies to existing problems by working closely with refineries, gas plants and oil processing facilities and engineering organizations.</li><li>Participate in studies and investigations in collaboration with other and outside organizations related to new and existing facilities and systems</li><li>Conduct simulation studies using licensed software packages covering process simulation software</li><li>Introduce energy saving technologies for energy intensive equipment.</li><li>Deliver presentations to an international audience of experts and publish technical papers</li><li>Develop energy efficiency roadmap for oil and gas refineries</li><li>Develop energy baseline and Energy KPIs to analyze the energy performance</li><li>Ensure energy compliance and efficiency of each operating facilities</li><li>Develop and maintain Energy Policy, documents and procedures.</li><li>Work with refinery energy team to identify energy saving opportunities and make recommendations to achieve more energy efficient operations.</li><li>Analyze and monitor refinery energy use on daily basis and conduct energy audits</li><li>Monitor refinery energy intensity indicators and control them toward energy efficiency</li><li>Conduct jobsite observation, field inspections or sub-metering to collect data for energy conservation analyses.</li><li>Conduct internal energy benchmarking studies among the oil and gas refineries</li><li>Organize technical exchange workshops among the oil and gas refineries Develop and deliver training material to promote energy awareness among refinery personnel.</li></ul> Requirements: <ul><li>As the successful candidate you will hold a Bachelor’s degree in Engineering. A M.S. or Ph.D degree in electrical, mechanical, chemical, or other advanced professional degree is highly preferable.</li><li>You will have a minimum of seventeen years of experience in process simulation applications in Oil &amp; Gas plants, refining &amp; petrochemical sector.</li><li>You will be able to demonstrate proficiency in the codes and standards in the oil and gas industry (e.g. API, BS, ISO, ASME, ANSI, IEC, ISA, IEEE, etc.)</li><li>You should have Strong analytical and troubleshooting skills in the field of energy engineering</li><li>You will be able to demonstrate familiarity with ISO-50001 Energy Management Standard and Requirement</li><li>You should have working knowledge of oil/gas-related plant processes</li><li>You should have familiarity with development of energy efficiency roadmap, energy baseline and setting targets of energy key performance indicators.</li><li>You should have strong data collection and data analytic experience to observe the energy saving opportunities and advise for better energy performance</li><li>You should possess excellent computer skills as well as excellent oral/written presentation skills.</li><li>You will be able to demonstrate strong management and coordination skills</li><li>You will be able to demonstrate the ability to work under pressure.</li></ul>

Role Description: <ul><li>This senior professional will be a focal point in well testing/pressure transient analysis as part of the Well Testing Division in Petroleum Engineering.&nbsp;</li><li>He or she is expected to provide support and leadership in multi-disciplinary projects for clients from diverse organizations.</li></ul> Responsibilities: <ul><li>Have skills in pressure transient analysis (PTA) in complex well/reservoir/fluid systems– for example, ICD/ICV/Smart Completion/Multilateral/MRC/EOR/Channel/MultiPhase/Tight and Unconventional Gas.</li><li>Must have excellent skills in building numerical models to study pressure-transient scenarios; for example,fault/fracture networks in heterogeneous systems, thermal effects in injection wells, etc.</li><li>Competent in processing and interpreting large and real-time data from intelligent fields.</li><li>Integrate PTA with petrophysical, geological, fluid properties, drilling and completion data, and operational details to build representative reservoir models.</li><li>Field experiences in design, supervision and execution of exploration well testing operations are essential. Special emphasis is put on testing operations in harsh and difficult environments e.g,deep water, heavy oil, involving H2S/CO2, etc.</li><li>Work effectively in multi-disciplinary teams and must be experienced in conducting studies and delivering technical presentations.</li><li>Prior experiences in modelling complex wells, completed over multiple, heterogeneous reservoir layers, are essential.</li><li>Capable of teaching complete, structured courses on well testing.</li><li>Coach young professionals to prepare them to take over difficult projects in the future. Also guide them as a career advisor.</li><li>Possess track records of building complex analytical and numerical models from scratch. Skills with deriving and coding mathematical solutions for transient pressures are desirable.</li><li>Experiences in building advanced transient models by calibrating geological sector models with well-test data are desirable.</li><li>Be seen as a person of excellence or a subject matter expert in the area of well testing.</li><li>Adapt and promote new technologies for efficiency and for improving quality of work. Get involved in development of new technologies.</li><li>Contribute to knowledge substantially by writing technical papers and filing patent ideas. Also present existing and new technologies in the knowledge sharing meetings.</li><li>Get involved in local, regional and international professional societies for exchange of knowledge and ideas.</li></ul> Requirements: <ul><li>Extensive engineering background with a degree in petroleum engineering or similar discipline. However, an MS or a PhD is preferred. Good exposure to production engineering, well logging, well testing operations, simulation, drilling and completions, and field development is essential.</li><li>At least 12 years of experience in petroleum engineering, including on-the-job experiences in pressure- transient analyses, numerical modelling with complex well and reservoir configurations or leading well testing operations.</li><li>At least 10 years of experience in building complex PTA models, or reservoir simulation models or leading well testing operations is essential.</li><li>Practical knowledge of using commercial software packages of well testing, simulation and geological modelling.</li><li>Field experiences in designing exploration well testing programs, and supervising and supporting operations are valued. Excellent understanding of surface and downhole tools in well testing is essential. Prior experiences of testing in difficult environments (e.g., deep water, heavy oil, high H2S/CO2 contents, etc.) are preferable.</li><li>Excellent project management skills.</li><li>Excellent skills in communicating with colleagues, clients and management.</li></ul>

Skills

Industry

Location

Jobtitle

28 simulation Jobs found

Process Simulation & Optimization Engineer ( GM )

ASC-Process Simulation & Optimization Engineer

PE Specialist Profile/Oil Reservoir Management

Process Engineering

Chemical Engineering (HDGP)

Process Engineering

Thermal Systems Engineer

Process Engineering -SAGO

ASC Energy Engineer - Energy Optimization Engineer

Well Testing Specialist – RD & SD

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

28 simulation Jobs found

Process Simulation & Optimization Engineer ( GM )

ASC-Process Simulation & Optimization Engineer

PE Specialist Profile/Oil Reservoir Management

Process Engineering

Chemical Engineering (HDGP)

Process Engineering

Thermal Systems Engineer

Process Engineering -SAGO

ASC Energy Engineer - Energy Optimization Engineer

Well Testing Specialist – RD & SD

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.