Senior Microbiology Technician

Production Supervisor

Microbiology Technician

Manager, Site Logistics & Project Integration

Digital Factory Engineer

Staff Software Engineer(Enterprise)

Staff Software Engineer (Auth0)

Talent Acquisition Consultant – Leadership Hiring

Staff Quality & Reliability Engineer

Supervisor – Quality & Reliability Engineering

Responsibilities: <ul><li>Perform and oversee complex microbiological activities, including environmental monitoring (viable and non-viable), utility sampling (e.g., water, compressed gases), and aseptic process support in areas utilizing isolator technology.</li><li>Conduct and review microbiological testing for bioburden, endotoxin (LAL), sterility, and microbial identification on raw materials, in-process samples, and final products.</li><li>Support and lead aspects of aseptic process simulations (media fills) including planning, execution, incubation, and interpretation of results within isolator systems.</li><li>Assist in the startup and qualification of the microbiology laboratory including equipment qualification, SOP development, method verification/validation, and environmental monitoring qualification.</li><li>Contribute to investigations, non-conformances, and microbiological excursions by providing subject matter expertise and supporting root cause analysis and CAPA implementation.</li><li>Ensure accurate and timely documentation of laboratory data in compliance with data integrity principles and cGMP guidelines.</li><li>Mentor and provide technical guidance to junior microbiology staff, fostering a culture of scientific excellence, compliance, and continuous learning.</li><li>Maintain laboratory readiness for internal and external audits by following and enforcing good laboratory practices and cGMP expectations.</li><li>Participate in ongoing improvements to laboratory procedures, contamination control strategies, and sterility assurance programs.</li><li>Interface cross-functionally with Quality Assurance, Manufacturing, Validation, and Engineering to support cleanroom and equipment qualifications, isolator decontamination cycles, and site expansion activities.</li></ul> Requirements: Qualifications/Experience: <ul><li>Bachelor’s degree in microbiology, Biology, Life Sciences, or a related field.</li><li>Minimum of 3-5 years of microbiology laboratory experience in a cGMP pharmaceutical or biotechnology manufacturing environment.</li><li>Experience with isolator-based sterile manufacturing processes and aseptic support activities is strongly preferred.</li><li>Working knowledge of cGMPs, FDA and EU Annex 1 requirements, and microbiological standards (USP &lt;61&gt;, &lt;62&gt;, &lt;71&gt;, &lt;85&gt;, &lt;1116&gt;).</li><li>Experience supporting laboratory equipment startup, qualification, and routine maintenance preferred.</li><li>Prior experience with high potent APIs and/or controlled substances is desirable.</li></ul> Skills/Competencies: <ul><li>Advanced technical skills in environmental monitoring, microbial testing, and aseptic processing support.</li><li>Strong documentation and data integrity skills with a meticulous attention to detail.</li><li>Demonstrated ability to troubleshoot microbiological and laboratory equipment issues.</li><li>Effective time management and prioritization skills in a fast-paced environment.</li><li>Strong communication skills with the ability to train and mentor junior staff.</li><li>Proactive, collaborative, and compliance-oriented mindset.</li><li>Comfortable working in cleanroom environments and adhering to gowning and contamination control protocols.</li></ul>

Responsibilities: <ul><li>Supervise daily manufacturing operations including formulation, filling, and packaging of sterile injectable IV bag products within cleanroom environments utilizing isolator technology.</li><li>Manage and develop production team members, providing coaching, training, and performance feedback to ensure adherence to standard operating procedures (SOPs) and quality expectations.</li><li>Author, review, and approve SOPs, batch records, and other production documentation to ensure compliance with cGMP and regulatory requirements.</li><li>Ensure compliance with cGMP, FDA, DEA, OSHA, and other regulatory requirements, particularly in handling high potent APIs and controlled substances.</li><li>Coordinate production schedules to meet demand and support planning, warehouse, and materials management functions.</li><li>Monitor key performance indicators (KPIs) for productivity, quality, and safety; implement corrective and preventive actions as needed.</li><li>Oversee line clearance, equipment setup, and cleaning activities, ensuring readiness for manufacturing operations and minimizing downtime.</li><li>Support deviations, investigations, and CAPA implementation in partnership with Quality Assurance and other support functions.</li><li>Drive continuous improvement initiatives to enhance operational efficiency, product quality, and operator engagement.</li><li>Ensure effective communication between production shifts and other departments to maintain smooth and efficient operations.</li><li>Maintain a strong safety culture, ensuring compliance with Environmental Health &amp; Safety (EHS) programs and best practices.</li></ul> Requirements: Qualifications/Experience: <ul><li>Bachelor’s degree in engineering, Life Sciences, or a related technical field preferred; equivalent experience considered.</li><li>Minimum of 3–5 years’ experience in pharmaceutical or biotechnology manufacturing, preferably in sterile or aseptic operations.</li><li>Supervisory experience leading production teams in a regulated environment.</li><li>Knowledge of cGMP, aseptic processing, and isolator-based manufacturing.</li><li>Experience with high potent APIs and/or controlled substances preferred.</li><li>Proficiency with production documentation, batch records, SOP authoring, and deviation processes.</li></ul> Requirements: Skills / Competencies: <ul><li>Strong leadership and team management skills with a focus on employee development.</li><li>Excellent organizational and problem-solving abilities.</li><li>Ability to manage multiple priorities in a fast-paced, dynamic environment.</li><li>Clear, concise communication skills (written and verbal).</li><li>Proficiency in Microsoft Office and familiarity with manufacturing execution systems (MES) or ERP platforms.</li><li>Commitment to data integrity, safety, and continuous improvement.</li></ul>

Responsibilities: <ul><li>Perform routine environmental monitoring (viable and non-viable) in classified cleanroom areas (Grade A/B/C/D), including surface and personnel monitoring. Manufacturing is performed inside isolators with surrounding grade C environment.</li><li>Collect and test samples from water systems (e.g., purified water, WFI), compressed gases, and other utilities per GMP and site procedures.</li><li>Support aseptic process simulations (media fills), including preparation, execution, and recovery/interpretation of microbiological data.</li><li>Perform microbiological tests such as bioburden, endotoxin (LAL), and sterility testing for raw materials, in-process samples, and finished products.</li><li>Prepare microbiological media, perform growth promotion testing, and maintain inventory of reagents and supplies.</li><li>Maintain laboratory notebooks, logs, and electronic systems in a compliant and organized manner, ensuring adherence to data integrity standards.</li><li>Support qualification and validation activities including cleanroom and utility qualifications, method validations, and EM qualification mapping.</li><li>Assist in investigations related to microbial excursions or deviations and contribute to the development and implementation of CAPAs.</li><li>Support microbiology lab startup activities including equipment qualification, SOP development, and execution of technical transfer protocols.</li><li>Follow all safety, quality, and regulatory policies, and maintain compliance with cGMP, USP, EU Annex 1, and other applicable guidelines.</li></ul> Requirements: Qualifications/Experience: <ul><li>Associate’s or bachelor’s degree in microbiology, Biology, Life Sciences, or a related field.</li><li>1–3 years of microbiology laboratory experience in a GMP-regulated pharmaceutical or biotechnology manufacturing environment.</li><li>Experience working in sterile environments or supporting aseptic processes preferred.</li><li>Familiarity with environmental monitoring equipment (e.g., particle counters, air samplers), microbiological techniques, and lab instrumentation.</li><li>Knowledge of cGMPs, data integrity principles, and microbiological standards (USP &lt;61&gt;, &lt;62&gt;, &lt;71&gt;, &lt;85&gt;, &lt;1116&gt;).</li></ul> Skills/Competencies: <ul><li>Strong attention to detail and commitment to data accuracy and integrity.</li><li>Ability to work independently while collaborating effectively within a team</li><li>Good time management and organizational skills to support multiple tasks and priorities.</li><li>Proficient in the use of Microsoft Office and basic laboratory software systems.</li><li>Willingness to work flexible shifts or weekends to support aseptic operations and testing schedules, as needed.</li><li>A proactive and patient-focused mindset with a strong sense of ownership and compliance.</li></ul>

Responsibilities: Warehouse &amp; Materials Management <ul><li>Oversee all warehouse activities including receiving, storage, handling, and internal material movement to ensure compliance with cGMP, DEA, and safety regulations.</li><li>Develop and maintain systems for inventory management, accuracy, and traceability, including raw materials, components, packaging, and finished goods.</li><li>Ensure timely and compliant movement of materials to support production schedules and product release timelines.</li><li>Collaborate with Quality and Compliance teams to maintain cGMP storage practices, support inspections, and ensure readiness.</li></ul> Planning &amp; Supply Coordination <ul><li>Lead the site’s production and materials planning processes to ensure timely availability of materials and resources to meet manufacturing demands.</li><li>Manage and optimize the site’s Master Production Schedule (MPS), material requirement planning (MRP), and capacity planning tools.</li><li>Coordinate with corporate Supply Chain and Procurement functions to align site planning with supplier performance and external manufacturing dependencies.</li></ul> Project Management &amp; Integration <ul><li>Serve as a site-level project manager for cross-functional initiatives including new product introductions (NPIs), facility readiness, equipment onboarding, and continuous improvement projects.</li><li>Develop project timelines, resource allocations, risk assessments, and stakeholder communication plans to ensure successful project execution.</li><li>Support greenfield and expansion activities by coordinating logistics, materials, and equipment staging activities.</li></ul> Systems &amp; Process Development <ul><li>Lead implementation and optimization of ERP and warehouse management systems to enable efficient and compliant operations.</li><li>Develop and implement SOPs, training programs, and KPIs across warehouse and planning functions.</li><li>Identify opportunities for process automation, waste reduction, and continuous improvement in site logistics operations.</li></ul> Requirements: Qualifications / Experience: <ul><li>Bachelor’s degree in Supply Chain, Engineering, Business, Operations Management, or related field.</li><li>7+ years of progressive experience in warehouse, planning, or project management roles within pharmaceutical or highly regulated industries.</li><li>Strong understanding of cGMPs, DEA requirements for controlled substances, and sterile manufacturing logistics.</li><li>Proven experience implementing ERP systems (SAP, Oracle, etc.) and managing warehouse or supply chain digital tools.</li><li>PMP certification or formal project management training strongly preferred.</li></ul> Skills/Competencies: <ul><li>Strong organizational, analytical, and problem-solving skills.</li><li>Effective leadership and team-building abilities across cross-functional stakeholders.</li><li>Proficiency in project management tools and planning systems.</li><li>Excellent verbal and written communication with the ability to influence at all levels.</li><li>High sense of ownership, attention to detail, and adaptability in a fast-paced, startup environment.</li><li>Commitment to compliance, quality, and patient-centered operations.</li></ul>

Responsibilities: <ul><li>At our client, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world.&nbsp;</li><li>Drives the implementation of programs and projects to improve products and processes and develops deployment plans.&nbsp;</li><li>Digital Factory transformation project followed APAC and Internal plant.direction.&nbsp;</li><li>Daily trouble shooting in production, provide short term &amp; long term solution to team.&nbsp;</li><li>Suggest &amp; drive improvements digital solution.&nbsp;</li><li>Support project assignment.&nbsp;</li></ul> Requirements:&nbsp; <ul><li>Plant digitals, cooperate with APAC and our client service team for transformation project.&nbsp;</li><li>Digital factory transformation project implementation, Identify and resolve issue during implementation.&nbsp;</li><li>Training on new digital tools and technologies. Develop training material and provide training to ensure fully utilization.&nbsp;</li><li>Maintain and troubleshooting for exiting digital tools, AGV, Material Calling System, Hydra, dPIM etc.&nbsp;</li><li>Continuous Improvement, identify new opportunities and innovation in operation processes.&nbsp;</li><li>Data analysis and monitoring, Operations Scorecard, Operation Dashboard (SCCOP, SHE, OEE) and advise weakness areas for improvement.&nbsp;</li><li>Handle on CER related /CI working with operations and cross functional team.&nbsp;</li><li>Support operations project assignment.&nbsp;</li></ul> What your background should look like&nbsp; <ul><li>Bachelor’s Degree in Information Technology, Computer science or related field.&nbsp;</li><li>Strong knowledge and experiences in Digital transformation projects.&nbsp;</li><li>Familiarity with digital tools and technologies used in manufacturing.&nbsp;</li><li>Minimum 3 to 6 years working experience in manufacturing sector.&nbsp;</li><li>Knowledge of in cloud technology, virtualization, mobile application, IOT, SQL Server.&nbsp;</li><li>Reporting Services, Power BI, Tableau.&nbsp;</li><li>Good knowledge in Data Storage, Cloud, Microsoft Power Apps.&nbsp;</li><li>Good knowledge in Dashboard creation, Graphic and User Interface (UI) design.&nbsp;</li><li>New enhancement for new functionality in SAP and Hydra.&nbsp;</li><li>OEE, Utilization analysis skill.&nbsp;</li><li>Knowledge and experiences in Enterprise Resource Planning software – SAP/BOM/Routing will be advantage.&nbsp;</li><li>Logical thinking with Project Management Skill.&nbsp;</li><li>Fluent in English and good communication.&nbsp;</li><li>Interpersonal skills.&nbsp;</li></ul>

Responsibilities: <ul><li>Be part of a diverse and collaborative team consisting of engineers, a product manager and a designer.</li><li>Provide technical direction to the team, detecting technical improvement opportunities and taking action to design and implement them.</li><li>Mentor or coach other engineers to support their growth and bring them along</li><li>Design and develop features, APIs, and fixes to handle our current and future scale.</li><li>Help our customers have a great experience products.</li><li>Be a strong independent contributor.</li><li>Participate in and help improve the team’s agile process.</li><li>Engage with the support team as the last level of escalation for tickets.</li></ul> Requirements: <ul><li>Must have 7+ years of expertise in software development.</li><li>Must have 7+ years of experience with Node.JS/Javascript/Typescript ecosystem</li><li>5+ years of experience in Postgres and Redis.</li><li>Excellent communication and collaboration skills&nbsp;&nbsp;</li><li>Expertise in designing, building and maintaining public or internal APIs with focus on security and performance.</li><li>Solid understanding of the Node.JS/Javascript/Typescript ecosystem</li><li>A bias for well tested code and relevant unit/integration/end to end/performance testing experience</li><li>The drive for designing and building highly reliable, scalable, and secure systems</li><li>A mindset for sharing knowledge and supporting the growth of others around you</li><li>Strong context switching capabilities to be able to contribute to several projects at once, within and beyond the team subdomain</li><li>An owner mentality- you hold yourself accountable and have a relentless commitment to loving your customers</li></ul>

Responsibilities: <ul><li>Build secure, performant, cross-platform applications for both customers and internal company teams.</li><li>Collaborate across teams to solve technical and non-technical challenges.</li><li>Work closely with Product and Design to determine and optimize user experience and information architecture.</li><li>Build new features and maintain existing features by contributing across the full technical stack.</li><li>Debug and resolve production issues and implement fixes for them.</li><li>Be a part of the teams on-call rotations.</li><li>Evaluate new technologies and techniques to improve overall practices.</li></ul> Requirements: <ul><li>Must have 7+ years of expertise in full-stack development.</li><li>Have a passion for learning.</li><li>Have excellent communication and collaboration skills.</li><li>Are customer-obsessed and love helping people.</li><li>Have a good understanding of Javascript and TypeScript.</li></ul>

Responsibilities: <ul><li>Non-IT Recruitment role</li><li>Focus on GM level and above hiring</li><li>Develop and execute a comprehensive talent acquisition strategy aligned with business goals and growth plans</li><li>Lead and manage the end-to-end recruitment function, ensuring consistent, high-quality hiring across all business units and geographies</li><li>Ensure exceptional candidate and hiring manager experiences, fostering engagement and strong stakeholder relationships</li><li>Calibration discussions</li><li>Present regular hiring insights and progress reports to senior leadership, highlighting performance, challenges, and market intelligence.</li></ul> Requirements: <ul><li>Blend of consulting and corporate recruitment experience preferred</li><li>Experience with multiple clients or business units (e.g., from firms like Korn Ferry, etc.)</li><li>Strong skills in Excel, PowerPoint, and dashboard creation</li><li>Familiarity with SuccessFactors (ATS) is an advantage</li><li>Clear and concise communication style</li></ul>

Responsibilities: <ul><li>Support bulk cable team by tracking quality, compiling reports, assist with DOEs and product qualification</li><li>Organize and facilitate Design Review (DR) and Design Failure Modes &amp; Effects Analysis (DFMEA) reviews.</li><li>Implement quality planning and controls for prototype and/or sample builds.</li><li>Complete measurement system analysis for inspection systems and gages to be utilized for the project.</li><li>Review and analyze samples, quality issues and improvement actions during prototype making and CTAR/Qualification.</li><li>Coordinate sample preparation and certification for product verification and qualification testing.</li><li>Conduct and analyze process capability studies in support of Final Tool Approval (FTAR) for all tools and production lines associated with the project using the Comprehensive Tool Approval Report (CTAR).</li><li>Collaborate with MPDE, monitor process capability/data and oversee ongoing corrective actions as required.</li><li>Collaborate with corporate UL team / UL engineer/PJE/PQE for new certification. -Collaborate with PDE, analyze physical/SI data and make qualification report.</li><li>Collaborate with PDE, CA PDE/SI/MPDE, support SQE on outsourced cable quality control and improvement from bulk cable engineering side.</li><li>Preparation for prototype/sample making: -Organize and facilitate Design Review (DR) and Design Failure Modes &amp; Effects Analysis (DFMEA) reviews.</li><li>Complete measurement system analysis for inspection systems and gages to be utilized for the project.</li><li>Data Analysis:Monitor process physical/SI data.</li><li>Review and analyze samples, quality issues and improvement actions during prototype making and CTAR/Qualification.</li><li>Review 108 and finish 501 documents per customer requirement and industrial standards.</li><li>Coordinator during prototype/sample making: -Monitor process capability and oversee ongoing corrective actions as required.</li><li>Support MPDE on FACA.</li><li>Support PDE on design improvement.</li><li>Coordinator during outsourced cable qualification process:Review outsourced cable Physical data, SI data, Reliability data, stability data, give comments from bulk cable engineering side on supplier quality and product quality.</li></ul> Requirements:﻿ <ul><li>Bachelors or Masters Degree in science or technology.</li><li>10 years min. working experience in bulk cable design or manufacturing.</li><li>3 years team management experience.</li><li>Familiar with bulk cable knowledge, bulk cable manufacturing knowledge and machines knowledge.</li><li>Can work under the pressure.</li><li>Drive for results, good problem solving skills</li><li>Good communication skill, integrity, accountability and passion, Integrity, ccountability, team work</li><li>Good communication, interpersonal and management skills</li></ul>

Responsibilities: <ul><li>Collaborate with engineering, production, and planning teams to continuously improve product quality across the manufacturing process.</li><li>Supervise and manage the incoming and final inspection areas.</li><li>Drive improvement initiatives within incoming, in-process, and final inspection operations.</li><li>Prioritize inspection activities to ensure timely completion of production materials, engineering validations, and gage R&amp;Rs.</li><li>Identify and execute containment actions for nonconforming materials found during in-process or final inspections.</li><li>Work with cross-functional teams to investigate nonconforming products using root cause analysis tools (Ishikawa, 5-Whys, Is-Is Not, etc.) and implement corrective and preventive actions.</li><li>Communicate with customers regarding product-related complaints and facilitate evaluation and return of materials as needed.</li><li>Investigate product quality issues related to customer returns (e.g., nonconforming material reports, corrective actions).</li><li>Create and update operations procedures and documentation used within production.</li><li>Ensure compliance with quality assurance policies and procedures to meet or exceed customer expectations.</li><li>Implement continuous improvement initiatives to reduce defects, improve efficiency, and enhance product quality.</li><li>Conduct manufacturing and quality system audits to ensure compliance with ISO 13485.</li><li>Support operational projects such as Kaizen, data analysis, and problem-solving initiatives.</li></ul> Requirements: Qualifications/Background: <ul><li>Bachelor’s degree in Quality, Science, or Engineering preferred (High School Diploma with equivalent experience will be considered).</li><li>Prior experience as a Quality Engineer in a manufacturing environment.</li><li>5+ years of industry experience in a medical device manufacturing or pharmaceutical environment.</li><li>Supervisory or management experience preferred.</li><li>Working knowledge of FDA, ISO, and MDD quality systems applicable to medical device companies.</li><li>Excellent written and verbal communication skills.</li></ul>

Skills

Industry

Location

Jobtitle

229 software engineer quality Jobs found

Senior Microbiology Technician

Production Supervisor

Microbiology Technician

Manager, Site Logistics & Project Integration

Digital Factory Engineer

Staff Software Engineer(Enterprise)

Staff Software Engineer (Auth0)

Talent Acquisition Consultant – Leadership Hiring

Staff Quality & Reliability Engineer

Supervisor – Quality & Reliability Engineering

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

229 software engineer quality Jobs found

Senior Microbiology Technician

Production Supervisor

Microbiology Technician

Manager, Site Logistics & Project Integration

Digital Factory Engineer

Staff Software Engineer(Enterprise)

Staff Software Engineer (Auth0)

Talent Acquisition Consultant – Leadership Hiring

Staff Quality & Reliability Engineer

Supervisor – Quality & Reliability Engineering

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.