Environmental Health and Safety (EHS) Manager

Supply Chain Business Process Expert

HR Business Partner IV

Operations Manager

Executive Assistant to Group CEO (Operations – Steel & Power)

Corporate Legal Counsel

Quality Engineer

Senior Project Manager Engineer

QC Chemist

Docusign Developer

Responsibilites: <ul><li>Develop and implement site-wide EHS programs aligned with federal, state, and local regulations, including OSHA, EPA, and DEA requirements for controlled substances.</li><li>Lead risk assessments, job hazard analyses (JHAs), and containment evaluations, particularly in areas handling high-potent and controlled substances.</li><li>Serve as the primary liaison for EHS-related aspects of DEA compliance, supporting controlled substance handling protocols in collaboration with Quality, Security, and Operations.</li><li>Oversee the environmental and safety controls for controlled substances, ensuring proper ventilation, storage, access restrictions, spill response, and waste disposal procedures in compliance with DEA and EPA regulations.</li><li>Develop and maintain physical and procedural controls related to controlled substance areas (e.g., vaults, restricted labs, destruction processes) in partnership with Security and Regulatory Affairs.</li><li>Lead the investigation and root cause analysis of all incidents, near-misses, and controlled substance discrepancies, and implement corrective/preventive actions.</li><li>Ensure training and education of site personnel in EHS best practices, with a focus on potent compound safety, exposure monitoring, and controlled substance handling protocols.</li><li>Implement industrial hygiene programs, including monitoring of airborne concentrations and potential operator exposure to potent and hazardous compounds.</li><li>Establish robust programs for emergency preparedness, including chemical spills, fires, security threats, and controlled substance incidents.</li><li>Maintain all required permits, records, and documentation related to hazardous waste, emissions, safety incidents, and controlled substance EHS compliance.</li><li>Partner with Engineering, Validation, and Operations to incorporate EHS and security standards into facility, utility, and equipment design and commissioning.</li><li>Foster a strong culture of safety, accountability, and environmental stewardship at all levels of the organization.</li></ul> Requirements: <ul><li>Bachelor’s degree in Environmental Science, Occupational Health &amp; Safety, Chemical Engineering, or related field (Master’s preferred).</li><li>Minimum of 7–10 years of progressive EHS experience in a GMP-regulated pharmaceutical or biotechnology manufacturing environment.</li><li>Direct experience managing EHS compliance for controlled substances (DEA Schedules II–V) and high-potency APIs strongly preferred.</li><li>In-depth knowledge of OSHA, EPA, DEA, NJDEP, and global EHS regulations and guidelines.</li><li>Familiarity with industrial hygiene, containment technologies, and safe handling procedures for potent compounds</li><li>Experience leading EHS activities during greenfield/startup site development and qualification is a plus.</li></ul>

Role Description: <ul><li>As a member of our ISC Global Automotive team, you will focus on enhancing our S&amp;OE process and driving the successful implementation of SAP APO PP/DS or S4 ePPDS as well as SAP IBP in our manufacturing plants.</li><li>Leveraging your extensive experience with advanced planning software, you will help define business requirements, ensure system readiness, and guide local teams through adoption and optimization processes.</li></ul> Responsibilities: <ul><li>Drive initiatives in automation and advanced planning systems to enhance and refine S&amp;OE processes.</li><li>Lead cross-functional teams - including project managers, subject matter experts, and IT partners - in defining business requirements, designing.</li><li>Provide project updates to various stakeholders at different levels of the organization.</li><li>Focus on timely project completion, resource deployment, staying within budget and appropriate adoption by end users.</li><li>Develop comprehensive training materials for end users and deliver training sessions and champion best practices and contribute to the development of standardized processes</li></ul> Requirements: <ul><li>Master’s degree or equivalent in Supply Chain, Materials Management, Business, Logistics, Engineering, or related field.</li><li>5 years’ hands-on experience in supply chain and operations, ideally manufacturing planning.&nbsp;</li><li>Extensive user-side experience in SAP APO PP/DS or S4 ePPDS implementation (essential); experience with SAP IBP Response is highly desirable.</li><li>Proven ability to use and train others on APO PP/DS and/or S4 ePPDS tools.</li></ul>

Responsibilities: <ul><li>The ICT business unit HRBP – Plant serves as a strategic business partner and trusted thought partner to Plant Leaders and in country senior Management.</li><li>This position is located on-site, but a hybrid work schedule will also be considered Serve as the HR site leader for the Tullahoma facility, acting as a trusted advisor to site leadership and aligning HR support with key business initiatives.</li><li>Partner with the broader HR network to deliver strategic talent solutions, organizational design, and effectiveness initiatives, fostering a One HR mindset.</li><li>Provide guidance on leadership development, succession planning, and talent pipeline strategies to support long term organizational growth. </li><li>Champion diversity, engagement, and inclusion efforts, with a global mindset and focus on creating equitable access to development and information.</li><li>Coach and support managers on performance, team effectiveness, and employee development to enhance leadership capability and culture. </li><li>Lead and resolve complex employee relations matters, ensuring legal compliance and a respectful, inclusive workplace.</li><li>Design and implement talent development initiatives including stretch assignments, mentoring, and targeted training programs. </li><li>Lead HR project management efforts related to workforce transitions, organizational change, and process improvement initiatives.</li><li>Collaborate with cross-functional partners to deliver high-impact HR initiatives, ensuring clear communication, risk management, and timely execution.</li><li>Preferred: Experience supporting M&amp;A activities, including HR due diligence, integration planning, and workforce impact assessments. </li><li>Develop and manage detailed project plans for HR initiatives, including milestones, communications, and risk mitigation strategies.</li></ul> Requirements: <ul><li>Bachelor’s or Master`s degree in business, Human Resource Management, Psychology, or any related field 10+ years of progressive, international, HR related experience; breadth of HR knowledge and skills in a variety of fields in international context, including Business Partner; Experience in a manufacturing and or operations environment is strongly preferred.</li><li>Executive level and leadership experience; Experience influencing without authority.</li><li>Ability to influence, lead and drive execution into the functions/region through close partnership and collaboration with the broader HR function Proved track record in Organization Design, Change Leadership, Talent Management, and Organizational Development Ability to multi-task and work efficiently in a fast-paced, international matrix organization.</li><li>Strong project management and organizational skills Fluent English language skills Has advanced knowledge of regional labor laws and obligations and uses this knowledge to advise management, especially in conflict situations Excellent interpersonal, negotiation, and communication Ability to travel up to 10%</li></ul>

Responsibilities: Policies and Procedures (10%): <ul><li>Develop and implement the manufacturing related policies and procedures in order to align with government regulation and corporate policy, organize the formulation of the responsibilities of management personnel at all levels, and optimize the internal structure and staffing.</li><li>Develop and implement assembly function budget and plan allocate function target to subordinates and monitor the achievement of the budget and overall performance in order to achieve targeted of Plant performance.&nbsp;</li></ul> People Management (15%): <ul><li>Allocate and balance work across direct reports&nbsp;&nbsp;</li><li>Review and provide timely performance feedback to direct reports&nbsp;&nbsp;</li><li>Mentor, develop and motivate them&nbsp;</li><li>Help resolve people/functional issues in the team&nbsp;</li><li>Submit manpower application and interview the candidates in order to achieve targeted department performance and retain key talent.&nbsp;</li></ul> Production (25%): <ul><li>Supervise and monitor the production activities and process&nbsp;</li><li>Help to solve critical production issues&nbsp;</li><li>Cooperate with other functions within molding department and other departments in getting necessary support in order to ensure the normal day-to-day production.&nbsp;</li></ul> Assembly (25%):&nbsp; <ul><li>Review the maintenance plan&nbsp;</li><li>Monitor the maintenance plan execution&nbsp;</li><li>Approve the Purchase Request for spare parts&nbsp;</li><li>Provide overall mold/Die/Tool maintenance instruction and monitor the execution in order to ensure the normal operation of die and improve daily operating efficiency.&nbsp;</li></ul> Equipment maintenance (5%): <ul><li>Review the maintenance plan&nbsp;</li><li>Monitor the maintenance plan execution&nbsp;</li><li>Approve the Purchase Request for equipment and parts&nbsp;</li><li>Provide overall equipment maintenance instruction and monitor the execution in order to ensure equipment operate reliably and improve daily operating efficiency.&nbsp;</li></ul> Engineering (10%):&nbsp; <ul><li>Allocate new projects to engineers&nbsp;</li><li>Monitor the new project process and control the cost and schedule&nbsp;</li><li>Provide cross functions/departments coordination&nbsp;</li><li>Help to solve critical technical issues in order to ensure the successful completion of the project.&nbsp;</li></ul> EHS (5%):&nbsp; <ul><li>Formulate and perfect the department EHS management system and operational procedures, and ensure the effective implementation.&nbsp;</li><li>Fully understand and implement EHS responsibilities to ensure EHS work in department meets relevant requirements&nbsp;</li><li>Set departmental and individual EHS performance targets according to laws and regulations and requirements of the company, and check and evaluate the completion of the targets regularly&nbsp;</li><li>Check the safety situation of production site regularly to eliminate all kinds of unsafe factors and prevent accidents.&nbsp;</li></ul> Project Management and Activity (10%):&nbsp; <ul><li>To reduce the costs and improve efficiency of the department, organize and plan key improvement projects, and monitor the implementation of these projects (Tebit Saving, Kaizen)&nbsp;</li><li>In order to improve and cooperate with the plant in implementing the excellent operation objectives, actively participate in training and use tools for improvement, such as VS Transformation, CCF, etc.</li></ul> Requirements: <ul><li>Bachelor and above Degree&nbsp;</li><li>Good English skills (written and oral)&nbsp;</li><li>Min. 10 years shopfloor management experiences in elec. Industry, above two years on managerial positions&nbsp;</li><li>Solid Lean/6 Sigma knowledge and project experiences&nbsp;</li><li>Familiar with quality system and tools&nbsp;</li><li>Rich experiences in operator training and development&nbsp;</li><li>Planning knowledge and experiences&nbsp;</li><li>Proficient PC skills.</li></ul>

Responsibilities: <ul><li>Assist the CEO in reviewing plant performance, production data, and technical reports from steel and power units.</li><li>Coordinate with project, maintenance, and operation teams for updates on production, energy consumption, and process optimization.</li><li>Serve as the liaison between the CEO’s office and functional heads, ensuring timely follow-up and closure of key action items.</li><li>Organize and document strategic meetings, board reviews, and inter-departmental coordination discussions.</li><li>Draft high-quality communications, reports, and briefing materials for the CEO.</li><li>Analyse operational KPIs and provide insights or recommendations for productivity and efficiency improvements.</li><li>Track progress of ongoing expansion, modernization, or efficiency projects.</li><li>Manage CEO’s schedule, travel plans, and meeting coordination where required.</li><li>Ensure confidentiality and proper handling of sensitive business information.</li><li>Support in preparation for stakeholder meetings (investors, government, JV partners, etc.).</li></ul> Requirements: <ul><li>B.E./B.Tech in Mechanical / Metallurgy / Electrical / Industrial Engineering, MBA or PGDM in Operations / Strategy (preferred from top ranked institutes)</li><li>Minimum 5–10 years of experience in plant operations, project management, or technical coordination roles in the steel/power sector.</li><li>Strong analytical, communication, and presentation skills.</li><li>High proficiency in MS Office (Excel, PowerPoint, Project) and ERP systems.</li></ul>

Role Description: <ul><li>We are seeking a qualified and experienced Corporate Legal Counsel to join our Legal team in Egypt.</li><li>This middle management role supports corporate legal operations across Egypt and support MENAT region, with a focus on contract management, governance, regulatory compliance, and internal advisory.</li><li>The successful candidate will report directly to the Head of Legal and act as a legal business partner to internal stakeholders.</li></ul> Responsibilities: Corporate and Regional Support <ul><li>Assist in reviewing corporate processes and documentation within Egypt.</li><li>Support legal coordination and compliance efforts across the MENAT region.</li><li>Maintain and update corporate records and filings in accordance with internal and regulatory requirements.</li><li>Support corporate secretarial functions across the region and ensure timely documentation.</li></ul> Contract Management and Documentation <ul><li>Draft, review, and revise legal documents including but not limited to contracts, NDAs, service agreements, B2B/B2C agreements, and purchase orders.</li><li>Collaborate with internal teams and external counsel to ensure contractual terms meet legal and business objectives.</li><li>Maintain organized records of executed agreements and develop standardized templates.</li></ul> Governance and Compliance <ul><li>Assist in implementing internal governance policies and monitor compliance.</li><li>Conduct legal research and support risk assessments related to business decisions.</li><li>Identify potential legal risks and escalate issues to the Head of Legal with recommended solutions.</li></ul> Legal Advisory and Communication <ul><li>Provide clear explanations of legal terms and obligations to internal stakeholders.</li><li>Provide legal opinion and consultations to internal stakeholders.</li><li>Act as a liaison between the legal department and other business units.</li><li>Prepare legal summaries and reports for senior legal review.</li></ul> Regulatory and Governmental Affairs <ul><li>Support corporate matters including GAFI documentation and authentication processes.</li><li>Liaise with governmental authorities regarding licensing and regulatory compliance.</li><li>Ensure adherence to company HSE policies and contribute to legal compliance in risk assessments.</li><li>Handle external law firms and corporate secretariate work and have the ability to draft bilingual OGMs, EGMs and BoDs.</li></ul> Requirements: <ul><li>Bachelor of Law (LL.B.) or Juris Doctor (J.D.) with a minimum grade of “Good”.</li><li>Master of Laws (LL.M) or equivalent postgraduate qualification is a plus.</li><li>4 – 7 years of experience in corporate law within a reputable law firm or multinational organization.</li><li>Admitted to the Egyptian Bar Association.</li><li>Fluent in English and Arabic (written and spoken).</li><li>Strong knowledge of contract law, corporate governance, licensing, and regulatory frameworks.</li><li>Familiarity with GAFI procedures and governmental dealings.</li><li>Litigation experience is a plus.</li></ul> Skills and Competencies <ul><li>Legal research, drafting, and negotiation.</li><li>Strong analytical and problem-solving skills.</li><li>Excellent communication and presentation abilities.</li><li>Ability to manage multiple tasks and meet deadlines.</li><li>High attention to detail and sound judgment.</li><li>Proficiency in Microsoft Office applications (Word, Excel, PowerPoint).</li></ul>

Responsibilities: Provide review and drive to approval of the validation protocols and reports for facility, equipment, laboratory instrument, and utility systems. <ul><li>Review and approval of technology/method transfer protocols and reports.</li><li>Review and evaluation of change controls</li><li>Review and approval of deviations and assurance that they define root causes and determine appropriate CAPA.</li><li>Participate in cross-functional teams to support execution of commissioning, installation qualification (IQ), operational qualification (OQ), performance qualification (PQ), and validation protocols.</li><li>Provide quality presence during qualification execution, ensuring data integrity, deviation management, and proper documentation of results.</li><li>Support the timely review and approval of executed qualification documentation and ensure readiness for inspection or submission.</li><li>Drive timely and compliant resolution of deviations, non-conformances, and CAPAs arising during operations and qualification activities.</li><li>Develop, implement, and maintain site-specific quality procedures (SOPs, work instructions, forms) governing validation, change control, deviation, and other SOPs relevant to the responsibilities</li><li>Review and approve site procedures to ensure clarity and compliance with cGMP standards.</li><li>Ensure proper execution of Good Documentation Practices (GDP) in all QA-reviewed documents, including validation records, logbooks, and manufacturing records.</li><li>Act as a QA representative during regulatory inspections, internal audits, and customer audits, with emphasis on operational and qualification-related topics.</li><li>Monitor key quality metrics and drive performance improvements in areas such as deviation reduction, batch record right-first time, and qualification readiness.</li><li>Contribute to the continued inspection readiness of the site, including periodic walkthroughs and risk-based quality improvements.</li></ul> Requirements: Qualifications/Experience <ul><li>Bachelor’s degree in engineering or technical discipline (e.g., engineering, Biology, Chemistry, Pharmacy).</li><li>5+ years of experience in pharmaceutical manufacturing QA, including direct involvement in qualification/validation activities.</li><li>Prior experience reviewing or approving qualification protocols and validation reports in GMP environments.</li><li>Familiarity with aseptic manufacturing, sterile injectable processes, and cleanroom environments.</li><li>Knowledge of FDA cGMPs, ICH Q8-Q10 guidelines, EU Annex 1, and risk-based qualification approaches.</li><li>Experience supporting regulatory inspections and validation documentation reviews.</li></ul> Skills/Competencies <ul><li>Strong knowledge of validation principles and qualification documentation expectations.</li><li>Effective team leader with experience supervising QA staff and coordinating cross-functional support.</li><li>Excellent organizational and communication skills with high attention to detail.</li><li>Ability to work collaboratively with operations, engineering, and validation stakeholders.</li><li>Sound judgment and decision-making under pressure in a dynamic manufacturing environment.</li><li>Commitment to data integrity, continuous improvement, and patient safety.</li></ul>

Responsibilities: <ul><li>Take full ownership of one or more New Product Development (NPD) projects.</li><li>Lead core teams toward achieving common project objectives.</li><li>Manage project resources effectively to ensure projects are “staffed for success.”</li><li>Collaborate and negotiate with functional managers and the Project Approval Committee (PAC) to address and resolve resource constraints.</li><li>Ensure adherence to the defined product development process and maintain project discipline.</li><li>Keep the team focused on priorities and individual responsibilities.</li><li>Present regular project status updates to the PAC following the contract date.</li><li>Proactively identify risks and drive timely actions to maintain project momentum.</li><li>Resolve conflicts and manage controversial issues constructively.</li></ul>&nbsp;Requirements: Qualifications &amp; Experience <ul><li>Education: Bachelor’s degree required.</li><li>Experience: 5–10 years of experience in project management or a related field.</li><li>Industry Experience: Manufacturing experience is required.</li><li>Proven leadership skills in developing and managing cross-functional teams.</li><li>Demonstrated ability to create effective project plans, manage risks, and handle uncertainties.</li><li>Solid understanding of project management techniques, tools, and best practices.</li><li>Knowledge of manufacturing processes and operations.</li><li>Experience working in a matrix organization and navigating cross-functional dynamics.</li><li>Expertise in balancing time-to-market goals with quality commitments.</li><li>Strong critical thinking, problem-solving, and decision-making skills.</li><li>Excellent verbal communication skills (English proficiency required).</li><li>Certifications: Qualification in Project Management or equivalent; PMP certification preferred.</li></ul>

Role Description: <ul><li>The QC Chemist will be a critical member of the laboratory team responsible for performing analytical testing to ensure the quality, safety, and compliance of sterile injectable IV bag products at a newly established greenfield pharmaceutical manufacturing facility.</li><li>This role will support the development, validation, and execution of analytical methods, ensure timely release of raw materials, in-process samples, and finished products, and maintain strict adherence to cGMP, FDA, and global regulatory standards.</li><li>The QC Chemist will play a key role in establishing laboratory operations during the startup phase and sustaining high standards of laboratory excellence throughout routine commercial production.</li></ul> Responsibilities: <ul><li>Perform analytical testing of raw materials, in-process samples, stability samples, and finished products using validated methods (e.g., HPLC, GC, UV-Vis, FTIR, TOC, etc.).</li><li>Develop and validate new analytical methods as required to support product development, regulatory submissions, and process optimization.</li><li>Ensure compliance with cGMP, FDA, USP, and other regulatory standards in all laboratory activities, documentation, and data integrity.</li><li>Prepare and review laboratory documentation including test protocols, reports, COAs, deviations, OOS investigations, and change control documentation.</li><li>Maintain laboratory instruments, perform routine calibrations, troubleshooting, and coordinate with vendors for preventive maintenance and repairs.</li><li>Support laboratory readiness for regulatory inspections, audits, and customer visits by maintaining audit-ready documentation and laboratory practices.</li><li>Assist in the preparation and execution of laboratory investigations, CAPA implementation, and root cause analysis for any analytical deviations.</li><li>Collaborate with cross-functional teams including Manufacturing, Quality Assurance, Validation, and Regulatory Affairs to ensure seamless batch release and product compliance.</li><li>Participate in training programs to ensure technical competency and adherence to evolving regulatory requirements.</li><li>Contribute to continuous improvement initiatives focused on laboratory efficiency, data integrity, and compliance robustness.</li></ul> Requirements: Qualifications/Experience: <ul><li>Bachelor’s or master’s degree in chemistry, Pharmaceutical Sciences, or related field.</li><li>3+ years of experience in pharmaceutical QC laboratory, preferably in sterile injectable manufacturing.</li><li>Strong hands-on experience with analytical instrumentation (HPLC, GC, UV, FTIR, etc.) and GMP-compliant laboratory operations.</li><li>Knowledge of FDA cGMP regulations, USP standards, ICH guidelines, and data integrity expectations.</li><li>Experience supporting laboratory investigations and regulatory inspections.</li></ul> Skills/Competencies: <ul><li>Strong analytical and problem-solving skills.</li><li>High attention to detail and accuracy in laboratory work.</li><li>Good understanding of data integrity and documentation practices.</li><li>Ability to work both independently and as part of a team in a dynamic startup environment.</li><li>Excellent organizational, time management, and communication skills.</li><li>Ability to adapt to evolving processes and regulatory requirements in a greenfield manufacturing setting.</li></ul>

Responsibilities: <ul><li>Design, develop, and maintain integrations with DocuSign CLM+ and eSignature APIs.</li><li>Implement and customize contract lifecycle management workflows.</li><li>Develop robust backend components using Java and C# to support business logic and integrations.</li><li>Work with XML and XSLT for document transformations and data interchange.</li><li>Build and manage stored procedures, packages, and triggers using Oracle PL/SQL.</li><li>Utilize Eclipse for Java development and Visual Studio for C# development.</li><li>Configure and support CI/CD pipelines using Azure DevOps.</li><li>Collaborate closely with business analysts, architects, QA, and infrastructure teams.</li><li>Troubleshoot and resolve integration and application issues across environments.</li><li>Create and maintain technical documentation and contribute to best practices.</li></ul> Requirements: <ul><li>8+ years of experience in enterprise application development.</li><li>Proficiency with DocuSign CLM+ (contract templates, workflow design, API integration).</li><li>Strong experience with DocuSign eSignature API and embedded signing flows.</li><li>Solid programming skills in Java and C#.</li><li>Expertise in XML and XSLT for document parsing and transformation.</li><li>Strong knowledge of Oracle Database and PL/SQL development.</li><li>Experience using Eclipse IDE and Visual Studio for software development.</li><li>Hands-on experience with Azure DevOps for version control, CI/CD pipelines, and environment management.</li><li>Strong analytical, communication, and problem-solving skills.</li></ul>

Skills

Industry

Location

Jobtitle

120 studio operations Jobs found

Environmental Health and Safety (EHS) Manager

Supply Chain Business Process Expert

HR Business Partner IV

Operations Manager

Executive Assistant to Group CEO (Operations – Steel & Power)

Corporate Legal Counsel

Quality Engineer

Senior Project Manager Engineer

QC Chemist

Docusign Developer

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

120 studio operations Jobs found

Environmental Health and Safety (EHS) Manager

Supply Chain Business Process Expert

HR Business Partner IV

Operations Manager

Executive Assistant to Group CEO (Operations – Steel & Power)

Corporate Legal Counsel

Quality Engineer

Senior Project Manager Engineer

QC Chemist

Docusign Developer

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.