Environmental Health and Safety (EHS) Manager

Senior Electrical Engineer

Principal R&D Innovation Engineer

Operations Manager

Product Manager / Senior Product Manager (Hospital & Oncology)

Quality Engineer

Strategic Sourcing Analyst

Associate, Quality Assurance (QMS)

C# Developer (SSE)

Finance Controller

Responsibilites: <ul><li>Develop and implement site-wide EHS programs aligned with federal, state, and local regulations, including OSHA, EPA, and DEA requirements for controlled substances.</li><li>Lead risk assessments, job hazard analyses (JHAs), and containment evaluations, particularly in areas handling high-potent and controlled substances.</li><li>Serve as the primary liaison for EHS-related aspects of DEA compliance, supporting controlled substance handling protocols in collaboration with Quality, Security, and Operations.</li><li>Oversee the environmental and safety controls for controlled substances, ensuring proper ventilation, storage, access restrictions, spill response, and waste disposal procedures in compliance with DEA and EPA regulations.</li><li>Develop and maintain physical and procedural controls related to controlled substance areas (e.g., vaults, restricted labs, destruction processes) in partnership with Security and Regulatory Affairs.</li><li>Lead the investigation and root cause analysis of all incidents, near-misses, and controlled substance discrepancies, and implement corrective/preventive actions.</li><li>Ensure training and education of site personnel in EHS best practices, with a focus on potent compound safety, exposure monitoring, and controlled substance handling protocols.</li><li>Implement industrial hygiene programs, including monitoring of airborne concentrations and potential operator exposure to potent and hazardous compounds.</li><li>Establish robust programs for emergency preparedness, including chemical spills, fires, security threats, and controlled substance incidents.</li><li>Maintain all required permits, records, and documentation related to hazardous waste, emissions, safety incidents, and controlled substance EHS compliance.</li><li>Partner with Engineering, Validation, and Operations to incorporate EHS and security standards into facility, utility, and equipment design and commissioning.</li><li>Foster a strong culture of safety, accountability, and environmental stewardship at all levels of the organization.</li></ul> Requirements: <ul><li>Bachelor’s degree in Environmental Science, Occupational Health &amp; Safety, Chemical Engineering, or related field (Master’s preferred).</li><li>Minimum of 7–10 years of progressive EHS experience in a GMP-regulated pharmaceutical or biotechnology manufacturing environment.</li><li>Direct experience managing EHS compliance for controlled substances (DEA Schedules II–V) and high-potency APIs strongly preferred.</li><li>In-depth knowledge of OSHA, EPA, DEA, NJDEP, and global EHS regulations and guidelines.</li><li>Familiarity with industrial hygiene, containment technologies, and safe handling procedures for potent compounds</li><li>Experience leading EHS activities during greenfield/startup site development and qualification is a plus.</li></ul>

Responsibilities: <ul><li>Meeting with the product engineers to determine product testing parameters.</li><li>Conducting quality assurance and designing performance tests using the new testing procedures.</li><li>Troubleshooting any errors and streamlining the testing procedures. Ensuring all tests and procedures meet company and industry standards.</li><li>Preparing test reports for management.</li></ul> Requirements: <ul><li>BS Degree in Engineering or Science, 5+ years’ experience related to primary job function, Electrical Engineering preferred.</li><li>Experience with software such as Altium, Ultiboard, Multisim, AutoCAD, Space Claim, Creo, and LabVIEW desirable.</li><li>Experience with solid state power switching highly desirable.</li><li>Familiarity with 270Vdc and 1000Vdc applications desirable.</li><li>Effective communication and presentation skills required.</li><li>Ability to maintain focus and complete tasks independently and on time.</li><li>This position requires access to information which is subject to stringent controls under the International Traffic in Arms Regulations (ITAR) or Export Administration Regulations (EAR). Candidates must be a U.S. citizen or national, U.S. lawful permanent resident, person granted asylee status in the U.S., or person admitted into the U.S. as a refugee.</li></ul>

Responsibilities: <ul><li>In conjunction with sales and product management, engage and partner with customer innovators and influencers to understand their challenges, their needs, the value they provide, and their future requirements.</li><li>Analyze emerging technologies to identify potential technology integration and product opportunities.</li><li>Contribute to the creation and maintenance of technology roadmaps.</li><li>Collaborate with cross-functional teams to develop and refine new product concepts.</li><li>Define, coordinate, and execute technology development projects in line with the technology roadmaps.</li><li>Stay current with industry developments, competitive landscape, end users’ system architecture and industry standards.</li><li>Drives the spirit of innovation into the organization to design and launch differentiated products.</li></ul> Requirements:&nbsp; <ul><li>Bachelors degree in an Engineering discipline (Master’s degree, preferred).</li><li>12+ years’ relevant experience including new product development, technology development &amp; demonstration, and customer-facing or customer collaboration roles.</li><li>Ideal candidate will have a deep knowledge of the utility, industrial and renewable industries.</li><li>Demonstrated ability to think creatively and solve complex problems.</li><li>Possesses high degree of initiative, technical competence, hands-on experience and engineering process knowledge.</li><li>Excellent communication and presentation skills.</li><li>A professional level of business acumen.</li></ul>

Responsibilities: Policies and Procedures (10%): <ul><li>Develop and implement the manufacturing related policies and procedures in order to align with government regulation and corporate policy, organize the formulation of the responsibilities of management personnel at all levels, and optimize the internal structure and staffing.</li><li>Develop and implement assembly function budget and plan allocate function target to subordinates and monitor the achievement of the budget and overall performance in order to achieve targeted of Plant performance.&nbsp;</li></ul> People Management (15%): <ul><li>Allocate and balance work across direct reports&nbsp;&nbsp;</li><li>Review and provide timely performance feedback to direct reports&nbsp;&nbsp;</li><li>Mentor, develop and motivate them&nbsp;</li><li>Help resolve people/functional issues in the team&nbsp;</li><li>Submit manpower application and interview the candidates in order to achieve targeted department performance and retain key talent.&nbsp;</li></ul> Production (25%): <ul><li>Supervise and monitor the production activities and process&nbsp;</li><li>Help to solve critical production issues&nbsp;</li><li>Cooperate with other functions within molding department and other departments in getting necessary support in order to ensure the normal day-to-day production.&nbsp;</li></ul> Assembly (25%):&nbsp; <ul><li>Review the maintenance plan&nbsp;</li><li>Monitor the maintenance plan execution&nbsp;</li><li>Approve the Purchase Request for spare parts&nbsp;</li><li>Provide overall mold/Die/Tool maintenance instruction and monitor the execution in order to ensure the normal operation of die and improve daily operating efficiency.&nbsp;</li></ul> Equipment maintenance (5%): <ul><li>Review the maintenance plan&nbsp;</li><li>Monitor the maintenance plan execution&nbsp;</li><li>Approve the Purchase Request for equipment and parts&nbsp;</li><li>Provide overall equipment maintenance instruction and monitor the execution in order to ensure equipment operate reliably and improve daily operating efficiency.&nbsp;</li></ul> Engineering (10%):&nbsp; <ul><li>Allocate new projects to engineers&nbsp;</li><li>Monitor the new project process and control the cost and schedule&nbsp;</li><li>Provide cross functions/departments coordination&nbsp;</li><li>Help to solve critical technical issues in order to ensure the successful completion of the project.&nbsp;</li></ul> EHS (5%):&nbsp; <ul><li>Formulate and perfect the department EHS management system and operational procedures, and ensure the effective implementation.&nbsp;</li><li>Fully understand and implement EHS responsibilities to ensure EHS work in department meets relevant requirements&nbsp;</li><li>Set departmental and individual EHS performance targets according to laws and regulations and requirements of the company, and check and evaluate the completion of the targets regularly&nbsp;</li><li>Check the safety situation of production site regularly to eliminate all kinds of unsafe factors and prevent accidents.&nbsp;</li></ul> Project Management and Activity (10%):&nbsp; <ul><li>To reduce the costs and improve efficiency of the department, organize and plan key improvement projects, and monitor the implementation of these projects (Tebit Saving, Kaizen)&nbsp;</li><li>In order to improve and cooperate with the plant in implementing the excellent operation objectives, actively participate in training and use tools for improvement, such as VS Transformation, CCF, etc.</li></ul> Requirements: <ul><li>Bachelor and above Degree&nbsp;</li><li>Good English skills (written and oral)&nbsp;</li><li>Min. 10 years shopfloor management experiences in elec. Industry, above two years on managerial positions&nbsp;</li><li>Solid Lean/6 Sigma knowledge and project experiences&nbsp;</li><li>Familiar with quality system and tools&nbsp;</li><li>Rich experiences in operator training and development&nbsp;</li><li>Planning knowledge and experiences&nbsp;</li><li>Proficient PC skills.</li></ul>

Role Overview: <ul><li>The Product Manager / Senior Product Manager – Hospital &amp; Oncology will be responsible for driving strategic and operational marketing initiatives for the Hospital Care portfolio across the Malaysian market.&nbsp;</li><li>This role focuses on developing and executing brand strategies, launching new products, and expanding the business through data-driven insights and strong cross-functional collaboration. The incumbent will play a key role in ensuring successful brand performance, portfolio growth, and alignment with corporate objectives within the hospital and institutional healthcare segments.</li></ul> Responsibilities: Marketing Planning (40%) <ul><li>Lead the development and execution of brand strategies and marketing plans to achieve business objectives and ensure effective market penetration.</li><li>Formulate pre-launch preparedness and go-to-market strategies for new and existing hospital care products.</li><li>Design and implement initiatives to enhance field force effectiveness, including sample strategy, sales meetings, and other sales-related marketing activities.</li><li>Develop and manage the annual brand business plan, including strategic priorities, objectives, and budget allocation.</li><li>Optimize resource planning and allocation to address evolving market dynamics and competitive challenges.</li></ul> New Portfolio Exploration &amp; Business Development (35%): <ul><li>Conduct in-depth product and market analyses to forecast demand, patient flow, and revenue potential for new products.</li><li>Generate actionable market insights through data analysis and engagement with healthcare professionals (HCPs).</li><li>Develop robust business cases for potential new portfolio additions, encompassing both prescription and hospital-based products.</li><li>Present business proposals and feasibility assessments to principals and senior management for approval and alignment.</li></ul> Marketing Implementation (25%): <ul><li>Plan, coordinate, and execute marketing campaigns and customer engagement activities to support product launches and ongoing brand promotion.</li><li>Build and strengthen relationships with key stakeholders including KOLs, hospital administrators, and healthcare associations to enhance brand reputation and visibility.</li><li>Implement and manage KOL engagement strategies aligned with brand objectives.</li><li>Manage brand budgets effectively and ensure timely development and rollout of marketing and promotional materials.</li><li>Support Continuing Medical Education (CME) programs and conduct product training sessions for the sales and medical teams to ensure consistent brand messaging and clinical accuracy.</li></ul> Requirements: <ul><li>Bachelor’s degree in Science or a related field.</li><li>Minimum of 2–3 years of experience as a Product Manager in a multinational pharmaceutical company.</li><li>Prior experience in a generic pharmaceutical company (in sales or product management) is an added advantage.</li><li>Strong understanding of key healthcare channels including general practitioners, private hospitals, public hospitals, and retail pharmacies.</li><li>Proven track record in brand management, product launches, and marketing strategy execution within the hospital or institutional care segment.</li><li>Customer-oriented with excellent interpersonal and communication skills.</li><li>Demonstrated ability to work collaboratively within cross-functional teams.</li><li>Exposure to digital marketing initiatives and analytics-driven campaigns is preferred.</li><li>Highly detail-oriented, with strong problem-solving and analytical skills.</li><li>Excellent verbal, written, and presentation abilities.</li><li>Strategic thinker with a performance-driven approach.</li></ul>

Responsibilities: Provide review and drive to approval of the validation protocols and reports for facility, equipment, laboratory instrument, and utility systems. <ul><li>Review and approval of technology/method transfer protocols and reports.</li><li>Review and evaluation of change controls</li><li>Review and approval of deviations and assurance that they define root causes and determine appropriate CAPA.</li><li>Participate in cross-functional teams to support execution of commissioning, installation qualification (IQ), operational qualification (OQ), performance qualification (PQ), and validation protocols.</li><li>Provide quality presence during qualification execution, ensuring data integrity, deviation management, and proper documentation of results.</li><li>Support the timely review and approval of executed qualification documentation and ensure readiness for inspection or submission.</li><li>Drive timely and compliant resolution of deviations, non-conformances, and CAPAs arising during operations and qualification activities.</li><li>Develop, implement, and maintain site-specific quality procedures (SOPs, work instructions, forms) governing validation, change control, deviation, and other SOPs relevant to the responsibilities</li><li>Review and approve site procedures to ensure clarity and compliance with cGMP standards.</li><li>Ensure proper execution of Good Documentation Practices (GDP) in all QA-reviewed documents, including validation records, logbooks, and manufacturing records.</li><li>Act as a QA representative during regulatory inspections, internal audits, and customer audits, with emphasis on operational and qualification-related topics.</li><li>Monitor key quality metrics and drive performance improvements in areas such as deviation reduction, batch record right-first time, and qualification readiness.</li><li>Contribute to the continued inspection readiness of the site, including periodic walkthroughs and risk-based quality improvements.</li></ul> Requirements: Qualifications/Experience <ul><li>Bachelor’s degree in engineering or technical discipline (e.g., engineering, Biology, Chemistry, Pharmacy).</li><li>5+ years of experience in pharmaceutical manufacturing QA, including direct involvement in qualification/validation activities.</li><li>Prior experience reviewing or approving qualification protocols and validation reports in GMP environments.</li><li>Familiarity with aseptic manufacturing, sterile injectable processes, and cleanroom environments.</li><li>Knowledge of FDA cGMPs, ICH Q8-Q10 guidelines, EU Annex 1, and risk-based qualification approaches.</li><li>Experience supporting regulatory inspections and validation documentation reviews.</li></ul> Skills/Competencies <ul><li>Strong knowledge of validation principles and qualification documentation expectations.</li><li>Effective team leader with experience supervising QA staff and coordinating cross-functional support.</li><li>Excellent organizational and communication skills with high attention to detail.</li><li>Ability to work collaboratively with operations, engineering, and validation stakeholders.</li><li>Sound judgment and decision-making under pressure in a dynamic manufacturing environment.</li><li>Commitment to data integrity, continuous improvement, and patient safety.</li></ul>

Responsibilities: Supplier Management &amp; Development: <ul><li>Identify, evaluate, and onboard new suppliers to support business requirements.</li><li>Conduct supplier audits and performance assessments to ensure quality and reliability.</li><li>Develop and maintain strong supplier relationships to improve lead times, cost, and supply chain efficiency.&nbsp;</li></ul> Cost Management &amp; Negotiation: <ul><li>Analyze cost structures and negotiate favorable terms for materials and components.</li><li>Support cost-reduction initiatives through competitive bidding, alternative sourcing, and value engineering.</li><li>Collaborate with finance and procurement teams to optimize the sourcing budget.</li></ul> Technical &amp; Cross-Functional Collaboration: <ul><li>Work closely with engineering, R&amp;D, and manufacturing teams to define sourcing requirements.</li><li>Ensure suppliers meet technical specifications and quality standards.</li><li>Support new product development by identifying suitable suppliers for prototypes and production.&nbsp;</li></ul> Supply Chain Optimization &amp; Risk Mitigation: <ul><li>Monitor market trends and risks to ensure a stable and competitive supply chain.</li><li>Develop strategies to mitigate supplier risks related to quality, pricing, and geopolitical factors.</li><li>Optimize sourcing strategies to reduce lead times and ensure on-time delivery.</li></ul> Requirements: Required Qualifications &amp; Skills: Education &amp; Experience: <ul><li>Bachelor’s degree in mechanical engineering, Electrical Engineering, Supply Chain Management, or a related field.</li><li>5+ years of experience in sourcing, procurement, or supplier management (preferably in automotive, electronics, or manufacturing industries).</li></ul> Technical &amp; Soft Skills: <ul><li>Strong negotiation and analytical skills.</li><li>Experience in working with SAP systems and sourcing tools.</li><li>Knowledge of supplier qualification processes, cost analysis, and risk assessment.</li><li>Familiarity with engineering drawings, specifications, and manufacturing processes.</li><li>Excellent communication, stakeholder management, and problem-solving abilities.</li></ul>

Role Description: <ul><li>The Entry-Level Associate, Quality Assurance supports the Quality Management System (QMS) and documentation processes at the Chestnut Ridge site.</li><li>This role is designed for individuals beginning their career in pharmaceutical quality assurance and provides hands-on experience in maintaining compliance and supporting documentation workflows in a regulated environment.</li></ul> Responsibilities: <ul><li>Assist in organizing and maintaining QMS documentation including SOPs, CAPAs, deviations, and complaints.</li><li>Support the preparation and tracking of quality metrics and trending reports.</li><li>Help coordinate internal audits and document audit responses.</li><li>Participate in documenting product quality complaints and adverse event records.</li><li>Aid in digitizing logbooks and checklists using electronic systems.</li><li>Collaborate with cross-functional teams to ensure timely and accurate documentation updates.</li><li>Provide administrative support for change control processes and quality-related meetings.</li><li>Assist in preparing documentation for regulatory inspections and external audits.</li><li>Maintain document control systems and ensure timely review and archival of QA records.</li><li>Support training documentation and tracking for QA-related procedures.</li><li>Help with data entry and analysis for quality reports using basic statistical tools.</li><li>Monitor document lifecycle and ensure version control compliance.</li><li>Participate in continuous improvement initiatives related to documentation and QMS processes.</li></ul> Requirements: Education &amp; Experience <ul><li>Required Education: Bachelor’s degree in Pharmaceutical Sciences or a related field.</li><li>Preferred Education: Master’s degree is a plus.</li><li>Experience: 1–3 years in a pharmaceutical or regulated industry (internships or co-op experience acceptable).</li><li>Tools/Technologies: Familiarity with QMS platforms and electronic documentation systems preferred.</li></ul> Physical Requirements <ul><li>On-site role at Chestnut Ridge, NY.</li><li>Standard work hours: 8 AM to 5 PM.</li><li>No travel required.</li><li>No lifting or driving responsibilities.</li></ul>

Responsibilities: <ul><li>Develop distributed system architecture and system integration&nbsp;&nbsp;</li><li>Design event-driven applications leveraging microservices architecture on cloud platform&nbsp;</li><li>Carry out Model and assess complex IT solutions&nbsp;&nbsp;</li><li>Work closely with platform engineers and other IT professionals to choose compatible design solutions&nbsp;</li><li>Manage and comply with release management process&nbsp;</li><li>Analyze the scope and expected organizational impact of information systems&nbsp;</li><li>Evaluate existing systems and provide advice on how to meet organizational requirements&nbsp;</li><li>Ensure that the technical components of the project are in sync with the business needs of the organization&nbsp;</li><li>Ensure that information systems are secure from threat&nbsp;</li><li>Provide advice on project design, project costs, and expected benefit&nbsp;</li><li>Identifies technical debt and proactively recommends alternatives or improvements&nbsp;</li></ul> Requirements: <ul><li>University degree in Computer Science, Computer Engineering or related subjects preferred&nbsp;&nbsp;</li><li>8+ years of work experience building applications&nbsp;</li><li>Advanced understanding of IT infrastructure and enterprise architectures&nbsp;</li><li>Proven experience with microservices-based architecture&nbsp;</li><li>Proficiency in coding with modern programming languages such as C#, Python, or Node.js&nbsp;</li><li>API-first development experience&nbsp;</li><li>Experience with Cloud Computing (Azure preferable)&nbsp;</li><li>Extensive expertise in any modern document-oriented database, with a preference for MongoDB&nbsp;</li><li>Experience in developing components for Event-Driven Architecture, with a minimum of production-level experience using Event Hubs or Event Grid (or similar technologies like Kafka)&nbsp;</li><li>Experience working in an agile environment with a focus on engineering practices like testing, continuous integration, etc.&nbsp;</li><li>Good knowledge of virtualization&nbsp;&nbsp;</li><li>Analytics mindset with critical thinking and problem-solving skills&nbsp;</li><li>Fine knowledge of industry trends and emerging technologies&nbsp;</li><li>Fluent in English&nbsp;</li></ul>

Responsibilities: <ul><li>Management of finance team to ensure delivery of timely, accurate monthly accounts, preparation of the financial pack and KPIs.</li><li>The key focus will be to drive financial and business improvements in the Filter Products manufacturing site and to act as a business partner to the local GM and management team.</li><li>Support is also required for the local Distribution business.</li><li>Review site month end financials, prepare variance analysis with supporting commentary consolidate for the Hungary region.</li><li>Drive site Gross margin and Non-productive spend initiatives.</li><li>Prepare and review customer and product analysis (pricing, revenue and margin).</li><li>Drive working capital improvements including cash collection and inventory management.</li><li>Ensure that standard costs are maintained and implemented across the product range in the Filter Products manufacturing site.</li><li>Review site control files and trial balances to ensure no financial risk to the business and instil robust financial controls.</li><li>Ensure that all sites comply with the Filtrona Accounting Manual (EAM).</li><li>To support the businesses in the preparation of the annual Plan and quarterly forecasts for the region and associated presentations and packs.</li><li>Review of all capex appraisals pre sign off and follow up on actual spend v plan.</li><li>Attend and present the financials at the monthly operational reviews.</li><li>Legal and banking signatory for the Filter Products business and sign off monthly payroll run.</li><li>Review monthly FX hedging forecasts and submissions to Group Treasury</li><li>Deal with Group, SBU and Regional FD requests</li><li>Lead the preparation for the Hungarian internal and external audits.</li><li>Develop staff and identify training needs within the team. Document standard procedures.</li><li>Keeping the HSE-, fire safety- and hygiene rules, wearing the relevant personal protective equipment.</li><li>During the daily work meeting the expectations of the Integrated Management System regulations.</li></ul> Requirements: <ul><li>Educated to degree level (potentially in Finance, Accounting, or Economics); professional accounting qualification.</li><li>10 years PQ experience within a manufacturing environment is essential.</li><li>High level of numeracy and IT literate (Excel/PowerPoint).</li><li>Excellent English written and oral communication skills.</li><li>Audit background</li><li>ERP system knowledge</li><li>Project management knowledge and experience</li></ul>

Skills

Industry

Location

Jobtitle

194 system analysis Jobs found

Environmental Health and Safety (EHS) Manager

Senior Electrical Engineer

Principal R&D Innovation Engineer

Operations Manager

Product Manager / Senior Product Manager (Hospital & Oncology)

Quality Engineer

Strategic Sourcing Analyst

Associate, Quality Assurance (QMS)

C# Developer (SSE)

Finance Controller

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

194 system analysis Jobs found

Environmental Health and Safety (EHS) Manager

Senior Electrical Engineer

Principal R&D Innovation Engineer

Operations Manager

Product Manager / Senior Product Manager (Hospital & Oncology)

Quality Engineer

Strategic Sourcing Analyst

Associate, Quality Assurance (QMS)

C# Developer (SSE)

Finance Controller

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.