Facility Planning – Utility

Manager - Tax Audit

Business Development Executive (Denmark)

Systems Engineer - PLM

Oracle Erp O2c Technical Consultant (senior Associate)

Oracle Erp P2p Technical Consultant (senior Associate)

Support Consultant

Avionics Systems Engineer

Solution Architect

Director, Packaging Equipment & Engineering

Responsibilities: <ul><li>Conducting technical and commercial assessment for the utility systems (power, steam, oxygen, nitrogen, instrument air, distilled water, waste management, storage tanks, etc.) to determine possible outsourcing to 3rd party.</li><li>Reviewing plans/deliverables for new integrated refinery and petrochemical projects to ensure that they comply with Company Standards and Regulations as well as industry codes.</li><li>Working with different Project Organizations to develop plans/design basis for utilities project such as Cogeneration, Desalination, CO₂ Capture System, Waste water treatment, Hydrogen Manufacturing, Air Separation Unit, etc.</li><li>Reviewing the Project Design for the utility systems such as Cogeneration, desalination, CO₂ Capture System, Waste water treatment, Hydrogen Manufacturing, Air Separation Unit, etc.</li><li>Daily Interaction with different Organizations to interpret, analyze, and act on their needs and requirements related to the utility systems, infrastructure and supply chain.</li><li>Develop Utilities design philosophy and Strategy.</li><li>Participate for Preparing Philosophy for OSBL/ISBL Interconnecting Pipelines from marine to facilities and vice versa including feedstock cross-country pipelines (e.g. Ethane, Crude, Utilities, etc.).</li><li>Perform a full lifecycle review of any design related to utilities.</li><li>Acts as technical consultant and subject matter expert when required.</li></ul> Participate, review, and analyze any document related to Utilities such as: <ul><li>Power and Steam Supply.</li><li>Desalinated Water Supply.&nbsp;</li><li>Cooling Water Supply / Return.&nbsp;</li><li>Steam and Condensate Return.&nbsp;</li><li>Oxygen / Nitrogen Supply to NH3 complex and other plants.</li><li>Instrument Air / Plant Air Supply Industrial Wastewater / Sewage.&nbsp;</li><li>Firewater.&nbsp;</li><li>Seawater Supply / Return.&nbsp;</li><li>Chemicals/raw materials supply to the facilities.</li><li>Participate and review energy and Hydrogen utilization report, and CO₂ report, inclusive of low purity and high purity sources.</li><li>Participate, review, and analyze any document related to utility, infrastructure, and supply chain.&nbsp;&nbsp;</li></ul> Requirements: <ul><li>Education: Utility engineers need a bachelor’s degree in engineering, such as civil engineering or electrical engineering or Chemical engineering or Mechanical engineering.</li><li>Experience:&nbsp;at least 15 years, preferably in the oil industry and Chemical industry.</li><li>Possesses excellent communication skills (strong English language, preferably other languages too).</li><li>Excellent negotiation skills and strong commercial/business acumen.</li><li>Knowledge in refining and petrochemical processes and their associated utilities and services.</li><li>Familiar with Utility Corridors (Power, Water, Sea Cooling, Pipelines, Roads, etc.)</li></ul>

Responsibilities: <ul><li>Oversight of the Companys transfer pricing matters and partnering with multiple stakeholders to provide support on transfer pricing-related issues</li><li>Handling transfer pricing analysis and reporting</li><li>Managing and preparing transfer pricing documentation to support intra-group transactions in compliance with local regulations</li><li>Conducting a regular internal reviews of transfer pricing policies in accordance with the latest tax regulation developments</li><li>Provide advice on transfer pricing implications for new business initiatives</li><li>Support transfer pricing audits, including responding to tax authorities on matters or queries relating to transfer pricing.</li></ul> Requirements:&nbsp; <ul><li>The candidate should have minimum 8 years’ experience in tax consultant, preferable in big four (KPMG, PwC, EY, or Deloitte).</li><li>The candidate should have deep knowledge about taxation, both ID Tax and International Tax (OECD), as well transfer pricing&nbsp;</li><li>The candidate should have Tax Certification (USKP, brevet, A, B and C)</li><li>The candidate should have experience in dealing with Tax Audit and tight deadline</li><li>The candidate should have experience in managing big team</li></ul>

Role Description: <ul><li>A BDE is an expert in solving customer problems/business needs. The BDE is responsible for accelerating time to value for our customers and supporting them in their cloud and digital transformation by aligning our solutions.</li><li>He has a good technical understanding and the ability to translate our customers challenges into commercial solutions.</li><li>The BDE identifies, develops and commercialises opportunities for defined portfolio elements in collaboration with account management.</li><li>The focus of the BDE is on new business with new and existing clients.</li><li>For existing clients, the sales cycle is initiated by Account Management.&nbsp;</li><li>New clients have to be acquired by the BDE, but BDEs always work in a team with the account manager.</li></ul> Responsibilities: <ul><li>Build relationships with new and existing clients and secure new business in assigned portfolio elements.</li><li>You will manage the entire sales cycle from initial client approach to contract closure for new clients. For existing clients, the sales cycle is initiated by the Account Manager.</li><li>Working with the Account Managers to ensure that the overall strategy and objectives of the client are followed and achieved.</li><li>Maintain a very detailed knowledge of current trends around AWS to have meaningful and relevant conversations with customers and prospects.</li><li>Working with Pre-Sales Consultant / Technical Architects / Practice Leaders to ensure we are building the right solutions for our clients</li><li>Responsible for the overall proposal and Statement of Work (SoW) and engage the Pre-Sales Consultant on more complex content related to the specific practice</li><li>Provide feedback to account management on ways to shorten the sales cycle, increase revenue and improve the companys brand and reputation</li><li>Managing sales team with the goal of generating deals (from lead qualification to sales strategy creation, proposal creation to contract negotiation)</li><li>You communicate at eye level with the operational level up to the C-level</li><li>You write "CUSTOMER CENTRICITY" in capital letters</li></ul>&nbsp;Requirements: <ul><li>You have several years of professional experience as a (technical) account manager or in sales of technical IT solutions.</li><li>You are very familiar with AWS services.</li><li>You understand the customers needs and speak at eye level with their operational units.</li><li>You are characterised by your excellent communication and presentation skills as well as a confident manner.</li><li>You have a very good customer, service and team orientation as well as strong implementation skills.</li><li>You are willing to travel.</li></ul>

Responsibilities: <ul><li>Act as primary technical contact assisting with the research, analysis and planning of implementation and maintenance of complex systems, internal consultant on intricate analysis and system administration task, lead technically involved projects, work under extreme task loads with full understanding of client business organization, practices, and requirements.</li><li>general objectives and will need to determine tasks, work with a high degree of independence, and act rapidly to prevent or correct errors.</li><li>represents the engineering organization and serves as primary organization contact on technically and functionally difficult aeronautical engineering activities.</li><li>work directly with technical and process experts to solve complex technical problems related to specific business needs.</li><li>expected to act as a subject matter expert related to business processes in this space.</li><li> </li></ul>&nbsp;Requirements: Education: <ul><li>Bachelor’s degree in a science, technical, engineering, or math discipline is required.</li></ul> Experience: <ul><li>At least 2 years of engineering, software development, configuration management, data management experience; demonstrated experience using a Product Life-cycle Management (PLM) system and PLM integration with CAD systems.</li><li>5 plus years with PLM is preferred.&nbsp;</li><li>Must have an engineering background with sufficient technical acumen to work effectively with technical engineering design teams.</li><li>Must have experience in CAD design and PLM application.</li><li>Must be able to produce technical specifications and documentation in support of business processes.</li><li>Must be proficient in configuration and change management methods as described in EIA-649 and as applicable to aviation civil authority and DoD needs.</li><li>Functional skills include: model based engineering (MBE), model based systems engineering (MBSE), product life-cycle management (PLM), configuration and change management (CM); engineering data management (EDM); aviation civil certification; DoD procurement and certification; testing, qualification and verification; and requirements management.</li></ul> Proficiency in any of the following applications is an advantage: <ul><li>3DEXPERIENCE Platform, CATIA Versions 5 or 6; familiarity with sheet metal, composites, fasteners, tubing, electrical, kinematics is a plus.</li><li>ENOVIA V6 (Versions 2013X, 2011X or Matrix One)</li><li>SIEMENS Unigraphics NX5 and TeamCenter 2007 or higher</li><li>Windchill PLM</li></ul>&nbsp;Other: <ul><li>This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR).</li><li>&nbsp;All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. Green Card Holder), Political Asylee, or Refugee.</li></ul>

<ul><li>Delivering projects focused on end-to-end Oracle O2C transformation</li><li>Using our industry leading methodologies to transform client&#8217;s businesses</li><li>Being available to travel to client sites anywhere in SouthEast Asia and potentially internationally</li><li>Where needed, carry out additional responsibilities such as business case development, requirements gathering, workshop delivery, business process design, functional and technical design, vendor selection, systems build, test and deploy, stakeholder management, change management, people/line management</li></ul>

<ul><li>Delivering projects focused on end-to-end Oracle P2P transformation</li><li>Using our industry leading methodologies to transform client&#8217;s businesses</li><li>Being available to travel to client sites anywhere in South East Asia and potentially internationally</li><li>Where needed, carry out additional responsibilities such as business case development, requirements gathering, workshop delivery, business process design, functional and technical design, vendor selection, systems build, test and deploy, stakeholder management, change management, people/line management</li></ul>

Overview: <ul><li>With a view to the further development of our division, we are expanding our dynamic team with a Support Consultant.</li></ul> You are partly involved in technical support, but also in broader advice: Responsibilities: <ul><li>Provide support to existing customers through email or telephone channels; as an expert you will be confronted with the most complex problems.</li><li>Making good agreements and setting expectations at the start of a new project</li><li>Installation and configuration of the application, where you can convert the customers wishes into functional processes in our solutions.</li><li>Providing training to our customers and following up on possible issues</li><li>Actively participate in the improvement of internal processes</li></ul> Telephone support for existing customers: <ul><li>As a Support Consultant you are the first point of contact for our customers when they need support.&nbsp;</li><li>You make an inventory of the situation and organize a suitable solution.&nbsp;</li><li>For more complex issues you communicate with the developers and consultants.&nbsp;</li><li>You are therefore also the key figure internally for handling support issues.&nbsp;</li><li>Support questions are usually followed up by telephone.</li></ul> Training and audits: <ul><li>In addition, you are also responsible for your own projects with existing and new customers.&nbsp;</li><li>Through a sophisticated configuration and in-depth training for users, you ensure that our customers can make optimal use of the functionalities of our solutions.&nbsp;</li><li>You work customer-oriented and structured.</li><li>You are active throughout Belgium.&nbsp;</li><li>You work from our offices in Ghent, Mechelen or Liège and working from home is also possible.&nbsp;</li><li>You report directly to the Operational Manager.</li></ul> Requirements:&nbsp;Education/career: <ul><li>You obtained a bachelors degree, preferably in IT or economics</li><li>You have a strong affinity with ICT and are willing to learn more in this domain</li><li>If you have worked with ERP or CRM software before, that is a plus</li><li>You have 2+ years of relevant experience</li><li>Affinity or a first experience with accounting is an important plus</li></ul> Knowledge and skills: <ul><li>You master the advanced functions of the Office package (Word, Excel and Outlook)</li><li>You are customer-oriented, even in difficult circumstances, and will therefore often listen actively and communicate in a clear and professional manner</li><li>You have the necessary didactic skills to provide training and have excellent communication and listening skills.</li><li>Thanks to your analysis and listening skills, you can convert customer needs into better processes.&nbsp;</li><li>You are assertive and can put yourself in the customers place to understand and convince them of their needs.&nbsp;</li><li>You can perfectly analyze their problems and solve them step by step, taking into account priorities, deadlines and budgets.</li><li>You express yourself fluently in Dutch, and you have a good understanding of French and English</li></ul> Personal characteristics: <ul><li>You are a troubleshooter and analytically set</li><li>You are naturally enthusiastic and positive and can also transfer this to others; you are bursting with energy and are a go-getter</li><li>You are flexible: you work both at the customer and at the office and remotely and on multiple projects at the same time</li><li>You are stress-resistant and can deal with demanding customers</li></ul>

Responsibilities: <ul><li>As an engineer, you will participate in the integration, testing and certification of electrical systems and avionics, preparation of plans and cooperation with other departments.</li><li>Daily tasks will include:</li><li>integration, testing and certification of electrical systems and avionics in accordance with requirements,</li><li>production of technical documentation for the development and maintenance of type design data,</li><li>preparation of test plans, execution of tests and preparation of compliance reports,</li><li>cooperation with other departments and business partners.</li></ul> Requirements: <ul><li>Degree in Electrical or Aerospace Engineering (or equivalent),</li><li>Excellent problem solving and communication skills,</li><li>Experience with avionics systems is desirable,</li><li>Good understanding in electrical engineering,</li><li>Hands-on attitude,</li><li>Proficient in Microsoft Office products,</li><li>Fluent in English.</li></ul>

Role: <ul><li>Solution Architect role within companys Global Products &amp; Solutions (GPS) organization to assess, design, develop, build, and validate industrial ethernet network and/or digital automation network design projects.&nbsp;</li><li>With in-depth technology knowledge about solutions, Solution Architect is expected to lead the effort in developing use cases and best practices in a multitude of customer industries and applications.&nbsp;</li><li>Innovation and sharing technology insights both internally and externally is part of their daily tasks.</li></ul> Responsibilities: <ul><li>Evaluate customer/partner industrial network and/or digital automation network design requirements.</li><li>Provide feedback and guidance for greenfield and brownfield network project designs.</li><li>Communicate with key internal and external project stakeholders to develop overall solutions incorporating technologies.</li><li>Develop standard practices and common designs for use cases utilizing technologies.</li><li>Support sales and solution consultant teams in the development of technical designs to meet customer requirements.</li><li>Document and visualize industrial network and/or digital automation network designs in the forms of design prerequisites, topology drawings, reports, configuration procedures, performance metrics, and demonstrations.</li><li>Validate designs in Customer Innovation Center (CIC) lab with GPS team including validation of technology with third party products.</li><li>Stay apprised and educated on industry standards, best practices, and emerging technologies that influence future design innovation.</li><li>Report projects and customers’ feedback to Sales, Product Management, and Engineering/R&amp;D</li></ul> Requirements: <ul><li>Education – Engineering Graduate with focus on IT or Process Automation</li><li>Experience – 6-10+ years of experience in Industrial Network engineering, design, and implementation.</li><li>Customers Define Our Success – Invests in understanding the customers’ needs (internal and external) and puts actions in place to meet and where possible exceed these expectations.&nbsp;</li><li>Always focuses on “what are customers’ technology requirements”.</li></ul>

Responsibilities: <ul><li>As a Packaging Engineering Director, your focus will be to drive packaging equipment solutions, strategies, and priorities.</li><li>You will lead a team of engineers to define scope and specifications to develop and commercialize new packaging equipment solutions across a wide range of product and package forms.&nbsp;</li><li>Get ready to help drive the company’s growth as you develop and implement packaging solutions within the Global Engineering function.</li><li>Drive technical solutions for Innovation and Supply Chain initiatives through delivery of cost-effective, high-quality scope definition and equipment specifications through effective team collaboration and alignment.</li><li>Support our supply chain through leadership of key value creation opportunities that require enablement by your packaging engineering team.</li><li>You’ll be leading the discovery, evaluation and advancement of packaging equipment and new technologies.&nbsp;</li><li>Leverage your technical skills to improve margin and deliver business results.&nbsp;&nbsp;</li><li>Demonstrate technical and business leadership within cross-functional teams while supporting the company philosophy and direction.</li><li>Engage with internal customers, Global Technology Owners, and Subject Matter Experts in the evaluation to provide the best technical solution to meet customer and consumer needs.</li><li>Youll be responsible for supervising and encouraging the professional development of direct reports along with providing recognition and rewarding performance appropriately. Partnering and working with cross-functional teams and building meaningful business relationships.</li><li>Influencing at all levels of the organization.</li></ul> Requirements: <ul><li>Bachelor’s degree in engineering with 8-10 years of technical experience or 15-20 years of technical experience.</li><li>Two years of people leadership experience.</li><li>Clear understanding CPG packaging equipment and systems.</li><li>Experience leading and managing projects and project teams.</li><li>Effective communication skills to convey complex and/or detailed information to a wide range of individuals and audiences with different knowledge levels.&nbsp;</li></ul> Locations: <ul><li>Battle Creek (MI), Kansas City, Jackson, Cary</li></ul>

Skills

Industry

Location

Jobtitle

336 technical consultant Jobs found

Facility Planning – Utility

Manager - Tax Audit

Business Development Executive (Denmark)

Systems Engineer - PLM

Oracle Erp O2c Technical Consultant (senior Associate)

Oracle Erp P2p Technical Consultant (senior Associate)

Support Consultant

Avionics Systems Engineer

Solution Architect

Director, Packaging Equipment & Engineering

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

336 technical consultant Jobs found

Facility Planning – Utility

Manager - Tax Audit

Business Development Executive (Denmark)

Systems Engineer - PLM

Oracle Erp O2c Technical Consultant (senior Associate)

Oracle Erp P2p Technical Consultant (senior Associate)

Support Consultant

Avionics Systems Engineer

Solution Architect

Director, Packaging Equipment & Engineering

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.