Sr. R&D Product DVL Engineer

Structural Engineer

Junior Graphic Designer (Contractual)

MPDE CA Process Design Engineer(Senior Engineer)

Principal R&D/Product Development Engineer (Remote)

Responsibilities: <ul><li>Understand Mechanical, Electrical, Environmental, and other requirements to design and develop next-generation electrical interconnect products to support the team’s focus within Outdoor LED Lighting and harsh environment connectivity.&nbsp;</li><li>Handle all aspects involved in New Product Development process from initial requirements gathering to production phase.&nbsp;</li><li>Generate concepts and detailed designs using development methods such as DFMEA, Tolerance Analysis, DFSS, etc.&nbsp;</li><li>Coordinate the execution of design validation product testing and certification according to international standards.&nbsp;</li><li>Design and documentation of precision stamped and molded electromechanical component assemblies.&nbsp;</li><li>De-risk product design by initiating and/or performing FEM and support analysis for critical items.&nbsp;</li><li>Engage directly with customers to clearly present designs for technical review and comment.&nbsp;</li><li>Optimize product designs for cost-efficient and high-quality manufacturing (DFM).&nbsp;</li><li>Utilize Design to Value (DTV) methodology to optimize product cost to increase product competitiveness.&nbsp;</li><li>Review and comment on First Article Approvals, Process Capability Studies, 8D reports, and other quality product analyses.&nbsp;</li><li>Work with Product Lifecycle Management, engineering documentation, and change management systems.&nbsp;</li><li>Engage with multi-functional global project teams consisting of Sales, Product Management, Project Management, Operations/Manufacturing, Quality, Global Product Approvals, and Outside Vendors.&nbsp;</li><li>Troubleshoot design issues during testing and production startup.&nbsp;</li></ul> Requirements: What Your Background Should Look Like&nbsp; <ul><li>Proven experience using 3D CAD design tools (Creo experience is a plus).&nbsp;</li><li>Experienced in Microsoft Office applications.&nbsp;</li><li>Knowledge of LEAN Product Development Cycle and Processes.&nbsp;</li><li>Experience in design of small plastic or metal components.&nbsp;</li><li>Basic knowledge in the selection of plastic or metal base materials and evaluation of material properties.&nbsp;</li><li>Demonstrated knowledge and use of finite element modeling/analysis to enable design refinement (Ansys experience preferred).&nbsp;</li><li>Ability to interact with customers to gather needs, transfer into technical requirements, and deliver conceptual solutions.&nbsp;</li><li>Ability to communicate effectively and accurately across multi-cultural groups.&nbsp;</li><li>Self-motivated, adaptive, passionate about results, and a good team player.&nbsp;</li><li>Strong technical aptitude with willingness to learn new technologies quickly.&nbsp;</li><li>Demonstrated experience of working in a fast-paced/changing environment&nbsp;</li><li>with the ability to work to tight deadlines, changing priorities, and multiple projects.&nbsp;</li><li>Knowledge of Global Certifications and Regulatory Standards (UL, IEC, etc.) is an added advantage.&nbsp;</li><li>Fluent communication and presentation skills in English.&nbsp;</li><li>Knowledge in basic quality techniques and engineering change management.&nbsp;</li><li>Experience in design of experiments/test plan development to support design validation activities.&nbsp;</li><li>7+ years minimum experience working in an engineering capacity.&nbsp;</li><li>Bachelor’s or Master’s Degree in an engineering field (Mechanical Engineering preferred).</li><li>Domestic travel may be required.</li></ul>

Role Description: <ul><li>This position will require an experienced, results-oriented professional to be responsible for Structural engineering.</li><li>The position will work in a multi-discipline team executing a variety of chemical manufacturing support projects and tasks to support our manufacturing sites.</li></ul> Responsibilities: <ul><li>Work with remote team members and global counterparts to develop deliverables required for structural fabrication and installation of projects and hence excellent communication skills a pre-requisite.</li><li>Provide structural analysis and engineering calculations of a variety of material types including but not limited to steel and concrete.</li><li>Provide structural analysis of steel and concrete elements.</li><li>Well versed with connection design calculations.</li><li>Participate in team model reviews.</li><li>Review Design Drawings</li></ul> Requirements: Basic Qualifications: <ul><li>Master’s degree in Structural Engineering from a reputed premiere institute.</li><li>Minimum 5 years of work experience in an Engineering and/or Engineering Services organization.</li><li>Must have engineering experience performing structural calculations and analysis of structures.</li><li>Computer Environment: Microsoft: Word, Excel, Power Point</li><li>Proficiency in STAAD Pro software</li><li>Should have exposure to environments of 2D and 3D CAD tools including Laser Scans, Bentley MicroStation, AVEVA and AutoCAD platforms or equivalent.</li><li>Experience with applicable industry codes including ACI, AISC, IBC and ability to utilize custom internal specifications as they apply to design and installation of structural assemblies and supports. Be able to perform tasks using U.S. or metric standards</li><li>Excellent written, listening, and verbal communication skills.</li></ul> Preferred Qualifications: <ul><li>Exposure to environments of 2D and 3D CAD tools including Laser Scans, Bentley MicroStation, AVEVA and AutoCAD platforms or equivalent.</li><li>Experience with applicable industry codes including ACI, AISC, IBC and ability to utilize custom internal specifications as they apply to design and installation of structural assemblies and supports. Be able to perform tasks using U.S. or metric standards.</li></ul>

This is 1 year Contractual role. Responsibilities: <ul><li>Support the Marketing team in developing design for both online and offline channels, including social media content, banners, POSM, key visuals and other marketing materials.</li><li>Handle regulatory-related artwork tasks such as product label adjustments, packaging updated and compliance revisions.</li><li>Develop creative concepts and produce high-quality artwork that align with brand identity and campaign objectives.</li><li>Collaborate and communicate with regional teams to align on briefs, feedback and deliver final artwork to meet expectations.</li><li>Work with external agencies by ensuring all deliverables align with brand guidelines.</li><li>Adapt, resize master assets for various markets, formats and platforms as required.</li><li>Create realistic products and packaging mockups to support presentations and marketing materials.</li><li>Ensure all artwork is delivered on time while maintaining high levels of accuracy, consistency and attention to details.</li><li>Support ad hoc design requests and collaborate with cross-functional teams when needed.</li></ul> Requirements: <ul><li>Education Background: Communication/Design/Creative</li><li>Education Level: Bachelor’s Degree</li><li>Working Experience: Min 2-3 years of working experiences in related area</li><li>Experience on brand design and copywriting , Adobe creative suite (Adobe illustrator &amp; Adobe Photoshop), 3D mock-up, Adobe premiere pro/adobe after affects will be a plus</li></ul>

Responsibilities: Process Solution Development: <ul><li>Design or optimize production process routes based on product design drawings (e.g., mechanical structures, electrical schematics), including raw material selection, process planning (e.g., cutting, wire pre-treatment, welding, forming, assembly, testing), equipment selection and parameter setting, and DOE development to ensure mass and stable production.</li><li>For new products (e.g., mechanical parts, electronic components), organize DFM reviews within the MPDE department, provide optimization suggestions from a manufacturability perspective, develop trial production process plans, participate in trial production, and resolve process issues (e.g., dimensional deviations, assembly difficulties, inefficiencies).</li></ul> Process Documentation: <ul><li>Prepare standardized process documents, such as SOPs, process flowcharts, PFMEA, and inspection standards, to clarify operational specifications and quality control points for each process, ensuring unified execution by production personnel.</li></ul> Production Efficiency and Quality Optimization: <ul><li>Analyze existing production processes, use lean production tools (e.g., 5S, value stream analysis) or technical improvements (e.g., introduction of automated equipment, process consolidation) to reduce production costs, shorten cycle times, and enhance capacity.</li><li>Collaborate with the quality department to investigate the causes of quality anomalies (e.g., excessive defect rates) from a process perspective (e.g., insufficient equipment precision, unreasonable process parameters), develop improvement measures, and validate their effectiveness through DOE.</li></ul> Cross-Department Collaboration: <ul><li>Work with R&amp;D departments, participate in product design reviews, provide suggestions from a process feasibility perspective (e.g., simplifying structures to reduce assembly difficulty), and promote Design for Manufacturability (DFM).</li><li>Communicate with supply chain departments to confirm the process compatibility of raw materials and assist in resolving process-related issues with purchased materials. Cooperate with production departments to train operators on new processes and equipment, ensuring successful implementation.</li><li>Collaborate closely with automation teams, participate in automation solution reviews, and develop validation methods.</li></ul> Technological Innovation and Cost Reduction: <ul><li>Stay updated on industry advancements (e.g., 3D printing, smart inspection equipment, laser welding), evaluate their applicability to existing production, and drive process upgrades. Achieve cost reduction through process optimization and the use of alternative low-cost materials (without compromising quality).</li></ul> Requirements: Education and Major: <ul><li>Bachelor’s degree or higher in Mechanical Engineering, Materials Science and Engineering, Industrial Engineering, Electrical Automation, or related fields.</li></ul> Knowledge and Skills: <ul><li>Mastery of fundamental manufacturing process principles (e.g., machining, electronic assembly, heat treatment) and familiarity with production processes in at least one industry (e.g., automotive parts, electronic devices, machinery manufacturing).</li><li>Strong process analysis skills, ability to interpret drawings using CAD/SolidWorks, and perform data analysis with tools like Minitab (e.g., analyzing defect rate causes).</li><li>Knowledge of quality and efficiency improvement methods such as Lean Production and Six Sigma; prior experience in process optimization projects is preferred.</li></ul> Experience Requirements: <ul><li>Typically requires 5+ years of experience in process development or production technical support in relevant industries; familiarity with high-speed cable equipment and process requirements is preferred.</li></ul>

Responsibilities: <ul><li>Lead the development of sockets, high-speed connectors, and cable assemblies from market definition to production release.</li><li>Collaborate with cross-functional teams (sales, applications, field engineers, project managers) to translate Voice of Customer (VOC) into technical concepts and specifications.</li><li>Conduct feasibility studies and generate design concepts.</li><li>Perform mechanical and thermal simulations.</li><li>Present design evaluations and proposals to customers.</li><li>Create detailed 2D/3D designs, DFMEA, and tolerance analyses.</li><li>Build and validate prototype samples.</li><li>Finalize product qualification and specifications.</li><li>Provide ongoing technical support to Operations, Quality, and Production teams.</li><li>Manage Engineering Change Notifications (ECN) and Product Change Notifications (PCN).</li><li>Maintain system-level understanding of customer applications and integrate solutions into the design process.</li><li>Drive projects through the LEANPD stage-gate process to ensure timely delivery of high-quality, cost-effective solutions.</li><li>Coordinate with manufacturing, procurement, and external suppliers to align with technical, quality, and cost targets.</li><li>Generate and manage all necessary technical documentation including design drawings, engineering changes, and design history files.</li><li>Support post-launch activities and continuous improvement initiatives.</li></ul> Requirements: <ul><li>Bachelor’s degree in Mechanical Engineering or equivalent work experience.</li><li>10+ years of relevant mechanical engineering experience involving:</li><li>Electrical components and devices.</li><li>Mechanical structure design.</li><li>Manufacturing tooling development (stamping, molding, assembly, plating).</li><li>Manufacturing process development.</li></ul> Strong knowledge in: <ul><li>Socket, connector, and cable assembly design.</li><li>Material selection.</li><li>Tolerance analysis.</li><li>DFMEA.</li><li>Product qualification.</li></ul> Expertise in 3D CAD applications (preferably Creo), including: <ul><li>3D solid modeling (sheet metal).</li><li>2D drawings.</li><li>PDM Link Data Manager.</li><li>General understanding of SpaceClaim, SolidWorks, or other conceptual design tools.</li></ul> Advanced proficiency in: <ul><li>Geometric Dimensioning &amp; Tolerancing (GD&amp;T).</li><li>Limit and fit analysis including statistical tolerance analysis.</li><li>Finite element analysis tools (e.g., Ansys, Workbench) for elastic and plastic behavior of metals.</li></ul> Proven ability to: <ul><li>Develop and write design objectives and technical product specifications.</li><li>Lead product development from concept to production.</li><li>Provide technical leadership across the full product lifecycle.</li></ul> In-depth knowledge of manufacturing processes: <ul><li>Machining, molding, stamping, plating, assembly.</li><li>Best practices in Design for Manufacturing (DFM).</li><li>Solid understanding of competitive product landscape and intellectual property considerations.</li><li>Fluent in English (verbal and written) to support global communication.</li><li>Comfortable working in a global, cross-functional team and across time zones.</li><li>Strong analytical and problem-solving skills; able to make data-driven decisions with minimal supervision.</li><li>Proficient in MS Office tools: Word, Excel, PowerPoint, Outlook, Teams, etc.</li></ul>

Skills

Industry

Location

Jobtitle

5 unity 3d Jobs found

Sr. R&D Product DVL Engineer

Structural Engineer

Junior Graphic Designer (Contractual)

MPDE CA Process Design Engineer(Senior Engineer)

Principal R&D/Product Development Engineer (Remote)

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

5 unity 3d Jobs found

Sr. R&D Product DVL Engineer

Structural Engineer

Junior Graphic Designer (Contractual)

MPDE CA Process Design Engineer(Senior Engineer)

Principal R&D/Product Development Engineer (Remote)

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.