Piping & Valves Engineer

Chemical Engineer

Reliability Engineer

Refinery Field Instrument Technician

Field Machinist Technician

Sr. Machinist Technician (Mechanical Repairman)

Civil & Structural Engineer

Cost Engineer ( GM )

ASC Cost Engineer

Responsibilities: As the successful candidate you will be required to perform the following: <ul><li>Perform field troubleshooting on a daily basis or as requested.</li><li>Participate on major T&amp;Is and emergency plant shutdowns.</li><li>Provide support to maintenance organizations e.g. Machine Shop or Welding Shop by developing repair procedures and following up with on-going repairs.&nbsp;Provide proposals for repairs or avail any ideas that can come from the execution team from a technical stand point&nbsp;</li><li>Participate in facilities audit activities.</li><li>Provide engineering support to repair hydrocarbon leaks, review and approve the bolted clamp calculations and design made by the specialized leak sealing contractor companies to maintenance prior to field installation.</li><li>Review detailed drawings and material specification from Layout Group for piping modifications as requested.</li><li>Participate in HAZOP Studies review.</li><li>Perform piping mechanical calculations like minimum wall thickness for internal and external pressure, branch reinforcement calculations, MAWP calculations as per ASME B31.3, hydrotest pressure, rating and/or de-rating of piping circuits by following API 570, fitness for service to evaluate flaws or damage and determine if the piece of pipe is suitable for continuous operation by using API 579, perform pipe stress analysis using Caesar II, perform flange calculations as per ASME VIII Div 1 App 2 using PVElite, perform nozzle calculations using WRC-107 and WRC-297 modeling the analysis in Caesar II or PVElite.</li><li>Mechanical calculations and technical assessment of all the miscellaneous mechanical items like for example: Expansion Joints, steam Traps, special valves, strainers, quill injector vortex shedding calculations</li><li>Perform Hot Tap calculations by using standard SAEP-311 and API 2201.</li><li>Troubleshoot and assess valve selection, perform mechanical calculations for check valves, perform torque calculations for valve stems, etc.</li><li>Calculate and select spring hangers, provide maintenance with repair procedures.</li><li>Select gaskets type and materials, provide correct specification and applicability to critical services.</li><li>Perform mechanical assessment for firefighting equipment and systems, perform basic hydraulic calculations for deluge systems, sprinklers, fire monitors, get the concurrence from chief fire prevention engineer is required.</li><li>Perform basic structural calculations for temporary supports and any other structure minor modification as requested.</li><li>Evaluate and recommend metallurgical changes along with Corrosion and Inspection specialist</li><li>Along with the repair procedures, develop basic welding procedures for repair of mechanical components and have the concurrence from CSD welding specialist.</li><li>Develop EWRs by preparing detailed design packages including scope of work, assembly/erection procedures, welding procedures, NDT requirements, material list and sketches/drawings.</li><li>Review and approve from the technical standpoint all quotations received as requested by maintenance when deemed necessary (Example: valves, pipe and fittings of special materials, etc.</li></ul> Requirements: <ul><li>You must hold a Bachelor Degree in Mechanical Engineering.</li><li>You should have a minimum of 15 years’ experience within the refinery and/or NGLF industry specifically in asset integrity of piping and valves, with at least 10 years field experience working on plants major turnaround and field troubleshooting.</li><li>You must have a thorough knowledge of best engineering practices, solid industry codes and standards background (ASME, API, NACE, ASTM, ISO) and use of engineering software’s.</li></ul>

Responsibilities: <ul><li>Perform process troubleshooting and address chronic operational problems</li><li>Conduct optimization of processes through identifying improvement opportunities and implementing technically robust and cost-effective solutions</li><li>Provide technical guidance and field support for process related issues in the plant</li><li>Lead investigations and HAZOP’s</li><li>Carry out detailed design reviews of plant modifications and support the implementation of projects</li><li>Develop and execute equipment/process assessment studies as well as feasibility studies for improvements to increase plant safety, reliability or efficiency</li><li>Mentor and develop young engineers.</li><li>Maintain the highest standards of integrity, engineering ethics and professional conduct.</li></ul> Requirements: <ul><li>Hold at least a BS degree in chemical engineering from a recognized university.</li><li>Minimum of 10 years’ industry experience preferably at operating facilities</li><li>Be able to perform process simulations and carry out equipment sizing and performance calculations (e.g. Relief valve, control valves, heat exchanger performance</li><li>Have significant experience in design development, technical design reviews and project execution (pre-commissioning, commissioning &amp; startup)</li><li>Have experience in process safety management systems &amp; tools such as HAZOPs and MOC’s</li><li>Possess a thorough knowledge of industry standards (e.g. API) as well as best practices (RAGAGEP)</li><li>Professional Engineering, Chartered Engineer or equivalent certification is desirable.</li><li>Be capable of project and design assignments beyond the ability of the basic professional Engineer III or is qualified to an outstanding degree in one or another "Specialist#.</li><li>Have a thorough knowledge of English is required to perform analyses and studies in depth, make professional presentations and keep up with technical advancements</li><li>Must have a thorough knowledge of engineering practices and economic principles, calculation methods, design details, US and Codes, Standards and Specifications.</li></ul>

Responsibilities: <ul><li>Perform engineering studies and Identifying the reliability programs, tasks, initiatives and/or studies that are applicable to the facility</li><li>Monitor the reliability performance of the organization through reliability KPIs, and identify lower level KPIs that are applicable to the processes of the facility</li><li>Provide recommendations for bridging gaps identified both by the KPIs and by other means of assessments and provide technical support with regards to their implementation Calculate MTBFs for all equipment, Research failure data, implement and improve equipment reliability, predict equipment failures based on MTBF, vibration trend analysis, and Oil Condition Monitoring data, Introduce new technology.</li><li>Review Engineering Request/Design packages for any machinery modifications or upgrade.</li><li>Establish the level of risk for equipment failure with Maintenance Foreman and Area Maintenance Engineer as well as with the rest of OME team using a Risk Analysis program or Enterprise Asset Performance Management and Evaluate Reliability and innovation ideas pertaining to machinery equipment.</li></ul> Requirements: <ul><li>As the successful candidate you will hold a Bachelors degree in Mechanical Engineering/Industrial Engineering or Electrical Engineering from a recognized and approved program. An advanced degree is preferred in Reliability Engineering.</li><li>You will have no less than 8 years of experience in Reliability Engineering including at least four years in Rotating Equipment or Valve Specialty.</li></ul>

Responsibilities: You will be required to perform the following:&nbsp; <ul><li>Perform engineering studies and Identifying the reliability programs, tasks, initiatives and/or studies that are applicable to the facility</li><li>Monitor the reliability performance of the organization through reliability KPIs, and identify lower level KPIs that are applicable to the processes of the facility</li><li>Provide recommendations for bridging gaps identified both by the KPIs and by other means of assessments and provide technical support with regards to their implementation Calculate MTBFs for all equipment, Research failure data, implement and improve equipment reliability, predict equipment failures based on MTBF, vibration trend analysis, and Oil Condition Monitoring data, Introduce new technology.</li><li>Review Engineering Request/Design packages for any machinery modifications or upgrade.</li><li>Establish the level of risk for equipment failure with Maintenance Foreman and Area Maintenance Engineer as well as with the rest of OME team using a Risk Analysis program or Enterprise Asset Performance Management and Evaluate Reliability and innovation ideas pertaining to machinery equipment.</li><li>Failure Analysis Program and Equipment Criticality Assessment&nbsp;</li><li>Root Cause Analysis Taproot TapRooT®&nbsp;</li><li>PMO2000 Program, Bad Actor Program and Zero-Defect Program&nbsp;</li><li>Six Sigma Studies Six Sigma&nbsp;</li><li>Lube Oil Condition Monitoring Lube oil&nbsp;</li><li>Vibration Condition Monitoring&nbsp;</li><li>Electrical Signal Analysis Infrared Analysis</li><li>Ultrasonic Analysis</li></ul> Requirements: <ul><li>As the successful candidate you will hold a Bachelors degree in Mechanical Engineering/Industrial Engineering or Electrical Engineering from a recognized and approved program. </li><li>An advanced degree is preferred in Reliability Engineering.</li><li>You will have no less than 8 years of experience in Reliability Engineering including at least four years in Rotating Equipment or Valve Specialty.</li></ul>

Responsibilities: As the successful candidate you will be required to perform the following: <ul><li>Fabricate and connect different size of instrument tubings and fittings.</li><li>Utilize different types of hand-held field communicator (TREX, Rosemount Configurator and Honeywell MC Toolkit Configurator) and other instrument test equipment.</li><li>Perform maintenance for the instrumentation attached to pumps, turbines and compressors</li></ul> Requirements: <ul><li>You must have a minimum of eight years’ experience as a field instrument tech in refining &amp; NGL plants and or petrochemical industries.</li><li>You must have a full understanding and adherence of all work permit type requirements.</li><li>You must have a full understanding of all industrial field instrument principle of operation, types and applications.</li><li>You must also have a full understanding of related Instrument Loop Diagram (ILD), Piping and Instrument Diagram (P&amp;ID), Instrument Specification Sheet (ISS) cause and effect, and other related drawing for Instrumentation.</li><li>You should have the ability to measure and convert field instrument signal.</li><li>You should have Strong analytical and troubleshooting skills in the field of Instrumentation.</li><li>You should be fully skilled to perform preventive maintenance and troubleshooting with the below list of field instruments;&nbsp;</li><li>configuration and maintenance of different model of Smart Transmitter (HART, Fieldbus and Honeywell Digital Transmitter)</li><li>diagnose and calibrate GWR Level transmitter (Magnetrol, Rosemount, Endress Houser and VEGA) Different model of Displacer type Level Transmitter smart and analog.</li><li>diagnose and calibrate, repair and replace control valve and positioner (Masoneilan, Fisher, valtek, METSO, FLOWSERVE, LCP100)</li><li>Test and repair Solenoid valve, Pneumatic relay, Boosters and regulators.</li><li>Instal, adjust and maintain of probes and approximators.</li><li>Maintain and replace deferent model of furnace heater flame scanner.</li></ul>

Responsibilities: <ul><li>Locate equipment faults and operating irregularities by making the necessary diagnostical tests, measurements and analyses. </li><li>This may be done with equipment in place in the field or if necessary by stripping equipment down in the field or shop.</li><li>Determine the nature of repairs to be made and replacement parts required.</li><li>Perform necessary maintenance on assigned equipment, stripping down, replacing, or machining parts as required. Reassemble equipment, run operating tests to ensure satisfactory repair.</li><li>Perform required rotating equipment alignment by rim and face, reverse and laser machine.</li><li>Set, adjust and perform steam turbine over speed trip test.</li><li>Troubleshoot and repair all kinds of hydraulic, electric (mechanical side) and pneumatic valve actuators.</li></ul> Requirements: <ul><li>You must hold an associate degree in mechanical engineering from a recognized and approved program. An advanced degree is preferred.</li><li>You should have a minimum of 8 years’ experience. </li><li>Equipment worked on should include all kinds of gas reciprocating and centrifugal compressors, steam turbines, vertical and horizontal pumps, manual and motor operated valves.</li><li>You must have a complete understanding and adherence of all work permit type requirements.</li><li>You must have a full understanding of all field mechanical principles of operation.</li><li>You should have strong analytical and troubleshooting skills in the field of rotating equipment.</li></ul>

Responsibilities : <ul><li class="ql-align-justify">Troubleshoot rotating equipment through necessary diagnostic tests, measurements and analysis by disassembling / reassembly test of equipment and determine steps of repair</li><li class="ql-align-justify">Apply applicable standard on the repair and installation of all types of rotating equipment in the field. I.E. foundation work, line-up, gear box, coupling and speed control settings, then test runs for acceptance</li><li class="ql-align-justify">Perform different balancing types of equipment parts</li><li class="ql-align-justify">Troubleshoot and repair all kinds of hydraulic, electric (mechanical side), and pneumatic valve actuators</li><li class="ql-align-justify">Ability to use all types of measuring instructions such as micrometers and dial indicators and other Inspection tools</li><li>Train junior machinists as required</li></ul> Requirements : <ul><li>Recognized apprenticeship / vocational Maintenance Machinist program with a minimum of Eleven years’ hands on experience in Machinist field as stipulated above under position description. Candidate must have the following the field experience requirements.</li><li>Ability to have computer soft skills such as: Microsoft Office and Internet.</li><li>Capability to performing equipment manual and laser alignment.</li><li>Candidate must have good communication skills in English speaking, reading and writing.</li></ul>

Responsibilities: You will be required to perform the following: <ul><li>Execute capital projects according to the scope, schedule and budget.</li><li>Perform complex technical and administrative tasks relative to the Design and coordination of civil &amp; structural packages.</li><li>Provide technical input and review of the design, construction, pre-commissioning, commissioning and startup of facilities.</li><li>Address technical issues arising in all phases of the project development related to civil &amp; structural packages of the facilities.</li><li>Responsible for project development: engineering studies, technical bid reviews, preliminary engineering, detail designs, materials procurement, construction, pre-commissioning, handover, commissioning and startup.</li><li>Review/provide input to the design of civil/structural packages that fully complies with standards and specifications.</li><li>Manage GES design contractor activities during the development of Pre-FEED &amp; FEED, including definition of project work scope and schedule requirements. Development of detailed estimate leading to funding appropriation and approval.</li><li>Stay up to date with international procedures of Projects Phases, Engineering Phases, Bidding procedures, Procurement Processes, Construction Requirements and up to date Best Practices.</li><li>Have full understanding of contract documents (inclusive of appendices, drawings and specifications), project execution plan, interface management, change management, construction sequencing, standards specifications and project schedule to ensure timely completion of projects.</li><li>Review and resolve day to day contractors’ activities related to assigned project work during construction and ensure HSE compliance.</li><li>Participate in developing civil/structural packages deliverables and others such as plot plans, Piping Plans, foundation details, load assessments, stress analysis, Data Sheets, structural details, BRAs, geotechnical &amp; soil tests, etc.</li><li>Provide design input in identification, sizing, selection, procurement of civil/structural material.</li><li>Provide design input to facilities such as pipe racks, substations, PIBs, control buildings, valve stations, process plants of Oil, Gas, refining, NGL, utilities etc.</li><li>Perform change order scope definition, cost estimation and assist the PM or Company representative in change management process.</li><li>Review weekly/monthly reports on the status/progress of contracts, including project costs and schedule. Attend project meetings e.g. progress, stakeholders, design review, value improvement.</li><li>Review project schedule, coordinate/monitor assigned project progress and challenge below par performance of contractor.</li><li>Review, coordinate, monitor invoices (claimed vs actual) and contractor’s submittals.</li><li>Perform Project Reporting and implementation of company initiatives during project execution.</li><li>Review design/study civil &amp; structural modifications to the facilities.</li><li>Provide routine civil &amp; structural (design and construction) support to facilities.</li><li>Develop and/or review testing procedures for civil &amp; structural packages.</li></ul> Requirements: <ul><li>As the successful candidate you will hold a Bachelor’s degree in Civil/Structural Engineering from a recognized and approved program. An advanced degree is preferred.</li><li>You will have fifteen years of experience in the Oil, Gas, and refining industries with a specialty in Civil &amp; Structural Engineering, such that the incumbent is clearly recognized as an expert in this field, including at least five years of field</li></ul>

Responsibilities: <ul><li>As the successful candidate you will be required to perform the following:</li><li>Assist in establishing estimating standards and strategies for maintenance work and turnaround in order to optimize cost and reduce risks.</li><li>Review bottom up estimate for yearly budget for maintenance.</li><li>Review bottom up estimate for planned turnaround.</li><li>Assist in establishing guidelines for yearly budgeting for maintenance and turnaround.&nbsp;&nbsp;&nbsp;</li><li>Coordinate and work closely with Maintenance Engineer / Turnaround Engineer to prepare / review / finalize initial yearly maintenance budget and turnaround budget.</li><li>Coordinate and work closely with Maintenance Engineer / Turnaround Engineer to review / finalize mid-year and Year-end budget.</li><li>Carryout spending analysis and find out areas of improvement for cost savings and improvement.</li><li>Carryout replacement vs maintenance cost of assets.&nbsp;</li><li>Coordinate and work closely with Maintenance Engineer / Turnaround Engineer / Contract Advisor to estimate contract cost in proposal stage.</li><li>Coordinate and work closely with Contract Advisor / Contract Engineer to evaluate price bid from cost engineering point of view.</li><li>Coordinate and work closely with Contract Advisor / Contract Engineer to prepare and establish cost evaluation criteria.</li><li>Assist in preparing, developing and measuring Key Performance Indicators for cost performance.&nbsp;</li><li>Maintain computer records of cost estimating standards and guidelines.</li><li>Coordinate and work closely with Maintenance Engineer / Turnaround Engineer to monitor cost at regular interval and produce periodic cost report.</li></ul>&nbsp;Requirements: <ul><li>As the successful candidate you must hold a Bachelor degree in Engineering, preferably in Mechanical, Electrical, Industrial, Construction, Production or closely related discipline.</li><li>You should have Minimum of 10 years cost engineering experience in maintenance and turnaround.</li><li>Experience in cost benchmarking such as Solomon will be an advantage.</li><li>You should be familiar &amp; experienced with contracting process and cost engineering in contracting.</li><li>You should be experienced in carrying out bottom up estimate for yearly budget for maintenance as well as planned turnaround.</li><li>You should also be experienced in the use of cost estimating tools and the application of market conditions and risk management to estimates.</li><li>Experienced &amp; knowledge in computer-estimating programs, such as Aspentech CCE (Capital Cost Estimator), etc. and shall be familiar with estimate databases such as Richardson or similar is required.</li><li>You should be experienced with SAP system.&nbsp;&nbsp;</li><li>Certification in Project Management Professional (PMP), AACE-CCP (American Association of Cost Engineers – Certified Cost Professional) or AACE-CEP (American Association of Cost Engineers – Certified Estimating Professional) will be preferred.</li></ul>

Responsibilities: As the successful candidate you will be required to perform the following: <ul><li>Assist in establishing estimating standards and strategies for maintenance work and turnaround in order to optimize cost and reduce risks.</li><li>Review bottom up estimate for yearly budget for maintenance.</li><li>Review bottom up estimate for planned turnaround.</li><li>Assist in establishing guidelines for yearly budgeting for maintenance and turnaround.&nbsp;&nbsp;</li><li>Coordinate and work closely with Maintenance Engineer / Turnaround Engineer to prepare / review / finalize initial yearly maintenance budget and turnaround budget.</li><li>Coordinate and work closely with Maintenance Engineer / Turnaround Engineer to review / finalize mid-year and Year-end budget.</li><li>Carryout spending analysis and find out areas of improvement for cost savings and improvement.</li><li>Carryout replacement vs maintenance cost of assets.&nbsp;</li><li>Coordinate and work closely with Maintenance Engineer / Turnaround Engineer / Contract Advisor to estimate contract cost in proposal stage.</li><li>Coordinate and work closely with Contract Advisor / Contract Engineer to evaluate price bid from cost engineering point of view.</li><li>Coordinate and work closely with Contract Advisor / Contract Engineer to prepare and establish cost evaluation criteria.</li><li>Assist in preparing, developing and measuring Key Performance Indicators for cost performance.&nbsp;</li><li>Maintain computer records of cost estimating standards and guidelines.</li><li>Coordinate and work closely with Maintenance Engineer / Turnaround Engineer to monitor cost at regular interval and produce periodic cost report.</li></ul> Requirements: <ul><li>As the successful candidate you must hold a Bachelor degree in Engineering, preferably in Mechanical, Electrical, Industrial, Construction, Production or closely related discipline.</li><li>You should have Minimum of 10 years cost engineering experience in maintenance and turnaround.</li><li>Experience in cost benchmarking such as Solomon will be an advantage.</li><li>You should be familiar &amp; experienced with contracting process and cost engineering in contracting.</li><li>You should be experienced in carrying out bottom up estimate for yearly budget for maintenance as well as planned turnaround.</li><li>You should also be experienced in the use of cost estimating tools and the application of market conditions and risk management to estimates.</li><li>Experienced &amp; knowledge in computer-estimating programs, such as Aspentech CCE (Capital Cost Estimator), etc. and shall be familiar with estimate databases such as Richardson or similar is required.</li><li>You should be experienced with SAP system.&nbsp;</li><li>Certification in Project Management Professional (PMP), AACE-CCP (American Association of Cost Engineers – Certified Cost Professional) or AACE-CEP (American Association of Cost Engineers – Certified Estimating Professional) will be preferred.</li></ul>

Skills

Industry

Location

Jobtitle

236 valve engineer Jobs found

Piping & Valves Engineer

Chemical Engineer

Reliability Engineer

Reliability Engineer

Refinery Field Instrument Technician

Field Machinist Technician

Sr. Machinist Technician (Mechanical Repairman)

Civil & Structural Engineer

Cost Engineer ( GM )

ASC Cost Engineer

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

236 valve engineer Jobs found

Piping & Valves Engineer

Chemical Engineer

Reliability Engineer

Reliability Engineer

Refinery Field Instrument Technician

Field Machinist Technician

Sr. Machinist Technician (Mechanical Repairman)

Civil & Structural Engineer

Cost Engineer ( GM )

ASC Cost Engineer

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.